anet a8 lcd panel factory

The cabling is fine I think. My printer uses the Anet v1.0 board that came with the original packaging. The printer was working fine, logging close to 10 hours of print time until it suddenly decided to quit on me. Do you have the board schematic? I am not sure where the problem is. Would be nice to figure it out. I have also raised a complaint to gearbest requesting an alternative board. Not particularly optimistic after looking up their track record.

anet a8 lcd panel factory

Is that the reprapdiscount lcd/sd card/rotary encoder? adding a few delays seemed to help mine stop corrupting on my anycubic kossel (ramps1.4 clone, with reprapdiscount clone). Rapidly twirling the encoder while going in and out of menus was the most reliable way I found to get corruption to happen and now it"s stable.

anet a8 lcd panel factory

Anet A8 is a pretty famous DIY FDM 3D printer from a Chinese manufacturer Anet 3D. This machine became one of the first affordable printers on the market, quickly becoming a choice for many newcomers. Despite being released a long time ago, Anet A8 is still on the market surprisingly withstanding competition from newer machines. Is it worth purchasing though? Let’s find out.

When Anet A8 first appeared on the market, a lot of enthusiasts purchased it thanks to the affordable cost of the kit. However, the low machine price was achieved due to cutting corners here and there resulting in first versions not only requiring a lot of upgrades and attention but sometimes being downright unsafe. The main concerning factor at the time was the power cord issue causing a fire hazard, which is in combination low-quality motherboard and unstable printing bed turned some users off the Anet A8. Additionally, when purchasing the kit from Chinese suppliers and resellers, some people ended with a different model, A6, falsely advertised as A8.

The information in regards to all troubles with A8 is easy to find and access, though, people still purchase this kit. And many are able to get pretty decent prints with it as well. Anet A8, undoubtedly, requires love from the very first day of buying it. Starting from building the printer from scratch through a bit messy videos from the manufacturer to making upgrades to accommodate for a wobbly frame. In no way this is ready from the box printer.

But there are bright sides to Anet A8. The manufacturer was quick to make changes to the printer resolving some issues from the first versions. That includes upgrading to an aluminum plate under a heating bed (which was acrylic and prone to warping) with metal rails on two sides. Additionally, later orders included a different motherboard and had changes to power cords and supply (though still no “off” button). These changes went unannounced and have no special mark on the printer’s model, however, by default A8 machines now are shipped with these newer parts. And the price for Anet A8 kit dropped even lower.

One of the great advantages of A8 is being an open system, meaning that with a bit of work the printer can be adjusted to preferences or needs in terms of software and structure. And some of the first upgrades for better performance can actually be 3D printed on the A8 itself. Alternatively, some users purchase A8 as a source of parts, which they build a slightly different printer with, upgrading from light and prone to wobbling acrylic frame to a metal one.

This one is a bit advanced upgrade that will require you to purchase additional bits. However, due to A8 infamous power supply, you should consider monitoring the voltage and current.

anet a8 lcd panel factory

. was founded in 2015 and has since grown to become a leading 3D printer manufacturer. In 2019, we launched six new models, more followed in 2020. 6 modernized production lines with over 200 well-trained staff allow for a monthly capacity of 30,000 units. We have an effective after-sales service system and after-sales service centers all over the world to serve our customers. Anet 3D products have been sold in over 70 countries across the globe. Our expert R&D team and after-sales support team ensure that products are of the highest quality and that customers get the best service possible. Every season, we will create a new form of 3D printer.

anet a8 lcd panel factory

Despite causing more than its fair share of house fires, the Anet A8 remains one of the most popular budget 3D printers to date. Between the large build volume, rock bottom prices and effective marketing tactics, this plastic oozing fire hazard has been placed into thousands of homes worldwide. Certain retailers hand out the machine to any Youtuber with a face, in exchange for an “unbiased” review of the product. In doing so, a brief Google search for “Anet A8 review” makes this $150 3D Printer look like the best thing since Cura sliced bread.

The Anet A8 package contains 3 Styrofoam trays filled with all of the necessary parts to assemble a working 3D Printer. While the included tools are sufficient in most cases, it is preferable to have a sturdy Phillips head screwdriver on hand. It will be used often and the one provided is quite small and uncomfortable to grip.

While there is no instruction manual included with the package, there are several official Anet videos on Youtube that cover the assembly process. Although the videos are well produced and easy to follow, they have released several revisions that don’t exactly fit together well. Between part one and part two, I found myself jumping back and fourth, trying to determine where it resumed the steps I was currently on.

The acrylic frame is designed like a puzzle that simply snaps together, locked into place using M3 nuts and bolts. This is certainly not the most rigid construction, however it does manage to at least hold everything together. Once the frame is done, installing the electric components such as motors, endstops and boards is almost fool proof. Everything has been labeled well, mounts to the frame and is nothing more than a game of plug and play. If you don’t mind a mess of wires, you can shave several hours off the build time. Proper cable management on the Anet A8 is somewhat complex given the lack of places to hide wires from plain view. I picked up some $2.00 split wire loom from Home Depot (personal preference) but they do include spiral loom, zip ties and plastic clips to aid in the organization process.

The materials used in the Anet A8 construction are nothing short of abysmal. A rigid frame is an absolute necessity in 3D Printing, where unexpected movement will create obvious defects. Any machine worth consideration will have a metal frame, often made from aluminum or steel. The choice to use acrylic (plastic) pieces was nothing more than a cost savings gimmick at the sacrifice of considerable product quality.

I purchased the Anet A8 3D Printer for two specific reasons. I wanted to (A) offer an honest review in a market that has been saturated with paid feedback and (B) take the opportunity to write a series of guides that cover how to make it safe and reliable. This is one of the most popular 3D Printers sold online, yet the most urgent mods and necessary upgrades are not nearly as accessible as they need to be.