ford focus mk2 lcd display problems price

If you have any questions regarding the Ford Focus Instrument Cluster Speedo Repair MK2 2004-2011, or would know how to remove your instrument cluster then please contact us.

This item is a color TFT LCD screen for a 2012 – 2018 Ford Focus. This screen will repair your black or blank speedometer display. Installation is simple. Simply remove the cluster, then remove the front lens and rear panel. The TFT LCD screen will easily pop out without disturbing the gauge needles. The small ribbon cable attached to the screen is also attached to the back of the circuit board. Carefully release the clip on the circuit board and remove the screen with the ribbon attached.

When you receive the new screen, you will reuse the original ribbon. Simply transfer it over to your new TAE screen. No programming is required. After installing your new LCD screen, plug your cluster back into your vehicle and enjoy a working display.

PLEASE NOTE: 2013 Ford Escape uses two different versions of this LCD screen.  With mounting bracket and without, please use the videos below to determine the correct LCD screen.

The displays are illuminated by LED"s but also contain a colored layer of foil that is embedded between the layers of glass. The green displays have a green colored foil while the red displays have a red colored foil.

Installing a MK2 instrument cluster with green illumination or MK2.5 instrument cluster is perfectly possible. Since 2008 I have done this at least a dozen times. Even an RS instrument cluster is fully compatible with any MK2/MK2.5 Petrol version. Installing an MK2.5 instrument cluster can also be quite cheap. Recently I bought a low mileage, mint condition MK2.5 instrument cluster with large display from a UK based scrap yard I paid less than €100,- including P&P. The Focus MK2/MK2.5 instrument cluster can easily be configured/reprogrammed using a cheap ELM327 in combination with the free ELMconfig and Forscan software.