how do i know if my lcd screen is broken factory

The outer glass layer of your phone and the LCD screen work together to make your smartphone function, but they can also malfunction separately. When you bring your smartphone into Tech Genius, one of our qualified technicians will run a diagnostic to try to identify the problems before opening up your phone to check for internal damage. Once we have identified the problem, we will be able to determine the best course of action to remedy the issue and how much the repair will cost.

However, if the digitizer or LCD is also damaged during a fall, that screen no longer carries value because it cannot be refurbished. Repair shops cannot sell broken LCDs to refurbishing companies; therefore, they cannot offset the cost of an LCD repair. That is why repair stores often charge a little extra if there is damage to the LCD or digitizer, to make up for that loss. Repair stores that don’t have an additional charge for an LCD repair typically inflate their glass repair price to make up for the loss from damaged LCDs. If they have one price, that means everyone is paying more to cover the cost of customers who have damaged LCDs and customers who only have cracked glass. This is why TCR separates the price of glass and LCD repairs for you! If you only have cracked glass, you only have to worry about paying to replace the cracked glass.

If your phone or tablet’s glass is shattered there will be cracks or chips on the screen itself. If it is just the glass that is damaged, the device may still function and you may be able to use it normally. If this is the case, it is likely that only the glass needs to be replaced. To prevent further damage to your device it is best to get it repaired quickly. For example, if liquids seep through the cracks it could cause permanent damage to the LCD.

Many people may continue to use their touchscreen with shattered glass and delay fixing the glass on their devices; however, if the touchscreen isn’t responsive, it could be a sign of more significant damage to the device’s digitizer which is integrated with the LCD screen.

A pixelated screen can indicate LCD damage. This would look like a patch of multicolored dots, a line or lines of discoloration, or a screen with rainbow colors. For many people, these colors are an easy way to know that their LCD is broken and that they should get it repaired.

Dropping your phone isn’t the only reason you’ll end up with a pixelated screen. Over time, your screen’s LCD may break down through regular use. This happens to other devices aside from your smartphone or tablet. Pixelation can happen to TVs and computers, too. People typically decide to buy a new device when this happens. Fortunately, with an LCD repair, you can fix the device without needing to replace it.

A black screen or black spots on your smartphone or tablet is an indication of a damaged LCD. Often with a bad LCD, a phone may still turn on and make noises, but there is no clear picture. This does not necessarily mean any other part of the phone is damaged and a simple screen replacement will get it functioning again. Sometimes it can mean a battery or other internal component is damaged. It is best to have a highly qualified phone repair technician diagnose what is wrong so the appropriate repair can be made.

Fortunately, your mobile device is fixable whether you cracked the glass or damaged the LCD. Stop by or call TCR: Triangle Cellular Repair at (919) 263-2699 for a free diagnostic and quick, affordable cell phone repair in Chapel Hill and surrounding areas. We’re always happy to help!

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Did you drop your phone on the floor? Or did it fall into the water? And now, you observe that the damage is not on the glass touchscreen. Instead, you likely have phone LCD problems. Usually, only the glass screen gets broken, but a significant fall can cause phone LCD problems. If you observe lines, black spots, screen flicker, or discolored areas on your screen, the LCD is damaged. If the screen entirely doesn’t light up, you have Phone LCD problems. Book a phone repair reservation at Carlcare as soon as possible to have your damaged LCD fixed.

You can visit the Carlcare website or app to book an appointment for a repair. Carlcare service centers handle LCD screen replacement not only for Infinix, TECNO, and itel phones. A typical question that most people ask is, how I can repair my LCD screen? The answer is – You cannot fix the LCD. Once the LCD is damaged, you have to replace it with a new one. Replacing the LCD is more technical than merely changing the glass.

The best person to handle the LCD screen repair is a mobile phone technician who has the expertise. So, you may consider taking it to the Carlcare phone repair shop near you.

The cost of an LCD screen repair depends on the phone type and model. Therefore, LCD screen repair for an expensive Android phone will cost more than a cheaper phone model.

Dust is seeping in due to a delay in repairing a damaged screen. If you crack your phone screen and do not fix it immediately, you could damage your LCD. Dust can also seep through the cracks on the screen and cause LCD screen damage.

Water or liquid damage: If you drop your phone into water or some other liquid, some of it could seep into the phone and damage the LCD screen. In this case, you will notice the damage immediately after you turn your phone on.

A fall: The glass and screen protector is supposed to shield your phone LCD from any damage. But, if the phone has a drastic fall, the impact can still cause Android screen display problems. You may notice after the fall that your phone comes on but has a blank screen or lines across the screen.

Poor replacement:If you are experiencing a damaged LCD shortly after changing a cracked phone screen, it could result from poor replacement. Perhaps the technician had used an inferior screen for replacement. As a result, the phone LCD got a problem.

The LCD is present in all phones and some other digital gadgets. LCD is the part of the screen that displays an image in terms of colors. In smartphones, it is the inner screen with all the display features for the phone. Phones usually have another screen or touchscreen protecting and enhancing the LCD screen.

When your phone mistakenly drops, you are usually worried about having an Android display problem. But, there is more cause for alarm if you are having Cell phone LCD problems. The LCD is more important than the outer glass covering it and more expensive to replace. Try to protect the LCD because you cannot manage a damaged LCD screen.

If you also asked, why is my phone glitching? Then you could have LCD screen problems. When the LCD is terrible, it can cause your screen to flicker or shake while using it. A flickering screen is not suitable for the eyes. Your screen might also become unresponsive.

You may sometimes mistake the glass for the LCD of your phone, but they are different. The phone works with a single display which has the glass screen and the LCD components coupled. But, the glass screen is sitting on the top while the LCD screen is inside.

If you have taken your phone for a repair due to the damaged glass, then you should have observed that the glass is different from the LCD even though they are together. Also, the LCD is integrated with the digitizer to allow the touch function to work.

Another difference is the price. If you have damaged the glass, it will cost you less to replace it. LCD is more expensive than glass or touchscreen. If the glass is damaged, you can still use the LCD. But if the LCD is damaged, the glass will not serve you for a more extended period.

The LCD is an integrated component of the phone connected to the digitizer. Since the digitizer converts analog signals to digital signals, some functions may be affected if you have LCD phone problems.

The touchscreen or touchpad:The LCD screen is connected to the device’s digitizer, transmitting touch from the outer glass screen. So, when your phone has LCD screen problems, your touchscreen might also stop responding.

Display: Since the LCD is the display point for the phone, a damaged LCD means that the image display is affected. Depending on the level of damage, you may only see a little, or In extreme cases, a damaged LCD could make it difficult for you to take calls.

Phone LCD problems should not be managed but fixed immediately. If you don’t, it can result in other more damages. Keep the phone away from heat and water too. Also, it would be best if you tried fixing a cracked phone screen as soon as possible.

As soon as you replace your LCD screen, ensure to keep it safe. You can protect your LCD screen by getting a good screen protector. A suitable phone case can also help protect your phone from the impact of any fall.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

You can email the site owner to let them know you were blocked. Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page.

As often as you use your smartphone, it’s almost inevitable that you’ll eventually drop it. You may be extremely careful, but it only takes one fumble for your phone to tumble. While iPhone screens are designed to withstand impact, you might still end up with a shattered screen.

The good news: a broken screen doesn’t mean your phone is kaput. In fact, if only the glass is broken, the fix is quick and inexpensive. The bad news: if the LCD screen is broken, you’re looking at a pricier repair.

If you’ve looked into replacement parts, you’ve likely come across two very different options: a glass screen, and an LCD screen. While the first option is cheap, the second is definitely not. Here’s the difference:

1. The glass screen is the exterior layer on your phone’s display. While it is specially engineered for durability, it’s still just glass (between layers of plastic film), which is why it’s not very pricey to replace.

Most of the time, the damage to your screen will be pretty obvious. You’ll see the spider web patterns of shattered glass across the front of your iPhone. Occasionally, however, the glass screen will be intact, and you might not realize the damage until you try to use it. Whether the damage is visible or not, it’s a good idea to run a quick diagnostic to determine the extent of it.

If you encounter any of these problems, you’re dealing with a broken LCD screen. If the glass is shattered, but the display is clear and touch capability is working, that’s a good sign. The problem is probably just the glass screen.

Whether you’re dealing with cracked glass or a broken LCD screen, you can find a quick, reliable repair service at FastPhoneRepair.com. Our qualified technicians will get your iPhone repaired and up and running again in record time and at reasonable rates.

This article was co-authored by Linh Le and by wikiHow staff writer, Nicole Levine, MFA. Linh Le is a Certified Mobile Repair Specialist and the Owner of SC Mobile Repairs in San Clemente, California. With more than 12 years of experience, he specializes in smartphone, tablet, and smartwatch hardware repair. Linh has an iTech Mobile Device Repair Certification and an iOS Certification. He holds a Bachelor’s degree from The Franciscan University of Steubenville.

How do you fix that which is broken? Specifically, how do you access your smartphone—to wipe all of your important data off of it, presumably before shipping it off for repair—when you’ve destroyed the screen?

I’m not quite sure what your broken smartphone actually does, based on your phrasing. If it’s cracked, but it powers up and you can get a reasonable sense of what you’re tapping—if the device even registers your finger-pressing—you can just factory reset it the normal way. Tap on the Settings app; then either “General Management,” “Backup and reset,” or “Privacy,” depending on what it’s called on your Galaxy J7 Pro; and then “Factory Data Reset” to get the process going.

If neither of these solutions work because your screen is too damaged—I dropped my iPhone 4 in a pool once, so I feel your pain—you have two other options.

Once you toggle the factory reset, you’ll need to power on your smartphone in order for it to trigger. And once the factory reset finishes, you shouldn’t be able to locate your smartphone on either Find My Device or Find My Mobile, since it will no longer be associated with your account. (It’s back to its default settings, after all.) That’s a great way to check and make sure the reset worked, in case you can’t see anything on your shattered screen.

Do you have a tech question keeping you up at night? Tired of troubleshooting your Windows or Mac? Looking for advice on apps, browser extensions, or utilities you can use to accomplish a particular task? Let us know! Tell us in the comments below or email.

Dell recommends ensuring that the device drivers and BIOS are up to date using the SupportAssist application for optimal video performance and to help resolve common video-related issues.

NOTE: When SupportAssist does not show up in the search results, go to the SupportAssist for PCs and tablets page for information about downloading and installing SupportAssist.

To learn how to manually download and install a device driver such as Chipset, Video card (GPU), and Monitor driver (if required, most monitor drivers are delivered automatically through Windows Update) on your Dell computer, see the Dell knowledge base article How to Download and Install Dell Drivers.

We must verify whether the problem is the display screen of the laptop, video card (GPU), or video settings on the computer. A straightforward way to identify this is to connect the laptop to an external monitor or TV.

If the issue persists on the external monitor, it may be an issue with the video card (GPU) or video settings and not the laptop LCD panel. Go to verify display or video issues in Windows Safe Mode. Otherwise, go to the next step.

Performance issues may occur if there is any damage to the LCD screen. The display may stop working, work intermittently, flicker, display horizontal or vertical lines, and so on, if there is damage to the display screen.

If you notice a physical damage, contact Dell Technical Support to learn more about repair options that are available in your region. If there is no damage, go to the next step.

Dell laptops have integrated diagnostic tools that can determine if the screen abnormality is an inherent problem with the LCD screen of the Dell laptop or with the video card (GPU) and computer settings.

When you notice screen abnormalities like flickering, distortion, clarity issues, fuzzy or blurry images, horizontal or vertical lines, color fade, running a diagnostic test on the LCD helps identify if the issue is with the LCD panel.

Press and hold the D key and turn on the computer to enter the LCD built-in self-test (BIST) mode. Continue to hold the D key until you see the entire screen change colors.

If you do not detect any screen abnormalities in the integrated self-test mode, the LCD panel of the laptop is functioning properly. Go to the Update the video card (GPU) driver, monitor driver, and BIOS section.

If you notice any abnormalities in the LCD built-in self-test mode, contact Dell Technical Support to learn more about repair options that are available in your region.

Windows Safe Mode does not load any drivers, startup applications, third-party services. This will help us identify if the issue is related to the operating system, video settings, device drivers, or third-party software. To learn how to boot your computer into Safe Mode, see the Dell knowledge base article below based on the operating system that is installed on the computer:

Windows updates can support your Windows operating system in many ways. Windows updates can solve specific problems, provide security patches and protection from malicious attacks, or even add new features to the operating system.

Display settings like brightness, refresh rate, resolution, and power management may affect the performance of the LCD screen on your Dell laptop. Changing or adjusting the display settings can help resolve several types of video issues.

NOTE: Depending on the model of the Dell laptop, the shortcut keys to adjust or change the brightness may differ. See the User Guide or User Manual of your Dell laptop for model-specific information.

If you find that the Dell laptop is unresponsive to touch, touch stops working entirely, or other touch-related issues, you can try some common troubleshooting steps to help fix the touch-related issue.

Stress Test can thoroughly diagnose the video card (GPU) on your computer and report any potential hardware problem. Running a stress test on your computer can verify if the hardware components are stable and thus reliable.

System Restore is an integrated Windows tool that is designed to protect and repair the operating system. When something goes wrong with your computer, System Restore must be used before you try to restore the operating system to factory default settings.

If the diagnostic tests on the LCD panel and the video card (GPU) passed, it is most definitely an issue that is related to software that is installed on the computer. If the above troubleshooting steps did not resolve the issue, you may try to restore the computer to factory default settings as a last resort.

WARNING: Restoring or resetting the computer to factory default settings will erase all personal data on the computer. Back up all important data like documents, images, music files, spreadsheets, videos to an external hard drive or a cloud-based backup like Microsoft OneDrive.

Dell computers are built with a small amount of hard disk space that is reserved for reinstalling the operating system. This method is the easiest way to restore the computer to factory condition. The restoration process deletes all user data from the computer, so be sure to back up all your files before starting this process.

Accidental Damage is any damage due to an unintentional act that is not the direct result of a manufacturing defect or failure. Accidental damage is not covered under the standard warranty of the product. Such damage is often the result of a drop or an impact on the LCD screen or any other part of the product which may render the device non-functional. Such types of damage are only covered under an Accidental Damage service offering which is an optional add-on to the basic warranty of the product. Accidental Damage must not be confused with an occasional dead or stuck pixel on the LCD panel. For more information about dead or stuck pixels, see the Dell Display Pixel Guidelines.

No, accidental damage is covered for Dell computers or monitors which are covered under the Accidental Damage Service offering for that specific product.

For more information about Dell Limited Hardware Warranty and Dell"s Accidental Damage service offering, see the Dell Warranty & Support Services page.

NOTE: Other damages may be considered customer induced if determined by Dell Technical Support, an on-site field engineer, or at the mail-in repair center.

The LCD glass on the display is manufactured to rigorous specifications and standards and will not typically crack or break on its own under normal use. In general, cracked, or broken glass is considered accidental damage and is not covered under the standard warranty.

Internal cracks typically occur due to excessive force on the screen. This can be the result of some object hitting the screen, a drop, attempting to close the lid while an object is on the keypad area, or even holding the laptop by its screen.

Spots typically occur due to an external force hitting the screen causing damage to the LCD panel"s backlight assembly. While the top layer did not crack or break, the underlying area was compressed and damaged causing this effect.

If your Dell laptop LCD panel has any accidental damage but the laptop is not covered by the Accidental Damage service offering, contact Dell Technical Support for repair options.

Dell monitors cannot be repaired by an on-site field engineer or at the mail-in repair center. If you notice any damage to the monitor, you must purchase a new monitor.

Laptop users can strive to make the most of their laptops to maximize stability, longevity, and usability. Understanding and implementing a few best practices for the safe handling of their laptop will enable them to enjoy their laptop for many years to come. For more information, see the Dell knowledge base article Dell Laptop Best Practices for Care, Use, and Handling.

A broken iPhone screen is no fun. After all, we use our phones for almost everything. If the touch response isn’t working, using your phone can be difficult, and it might not be possible to use it at all. This can make it hard to keep up with friends, plan your day, and even do your job.

There are several reasons your iPhone touchscreen could stop working. One of the most common reasons is physical damage. If your screen stopped working after it hit something, the damage is most likely physical.

Damage from excessive heat is actually quite common. Those who use a car vent clip for their iPhones are likely to experience heat damage if they turn the heat on. Many might not realize that the vent is even on since they don’t feel it, but the iPhone could get damaged in the process.

If your iPhone was exposed to salt water before it stopped working, then that was most likely the cause of the damage. Salt water is corrosive and, while your phone might have been fine right away, the damage could continue to progress for weeks after exposure.

The iPhone actually has two parts to its screen. The top part is the digitizer and the part underneath is the LCD screen. The digitizer is the touchscreen and the LCD screen displays the contents of your iPhone.

When your digitizer isn’t working, your iPhone touch response won’t work properly. Meaning you’ll see your screen, but you won’t be able to interact with it correctly. Sometimes, only part of your screen will work, or it will take extra pressure to tap something.

If your LCD screen is out, your iPhone won’t turn on at all and you won’t see anything on your screen. Alternatively, your screen will be blurry or fuzzy or will have some sort of visible damage.

If there’s a problem with your digitizer, there are a few fixes you can try before taking your iPhone to a repair shop. However, if it’s the LCD, you’ll need to start searching for repairs straight away.

Some users might have activated certain accessibility settings that can interfere with how the touchscreen works. The most common culprit is Touch Accommodations. If enabled, your iPhone screen will seem buggy and you’ll have a difficult time navigating the touchscreen.

Alternatively, you can click the Side button three times and this will disable it on most newer devices. For older devices, you may need to tap the Home button three times.

If turning your iPhone off and on again doesn’t do anything, you’ll need to do a factory reset. Be sure to back up your iPhone before moving forward. If you can use your screen in some way, navigate to Settings > General > Transfer or Reset iPhone > Erase All Content and Settings.

If you can’t navigate here, you’ll need to plug your iPhone into a computer to perform a factory reset. After resetting, in rare cases, your touchscreen will work again.

If you do choose to get your iPhone repaired, you’ll most likely need to do this anyway. This ensures that the technician won’t be able to access your personal data. They may also need to test Face ID to make sure the repair worked and will need the phone to be unlocked to do so, which means you’re better off erasing all your data first.

If your iPhone is under warranty, you’ll want to get Apple to take a look at it as soon as possible. Visit the Apple website to figure out if you have a warranty. If you have AppleCare+, your repair will be deeply discounted.

If you aren’t under warranty and don’t have AppleCare+, you can still use the above link to find authorized repair shops near you. Apple-recognized repair shops are the best place to go to get your device repaired. However, they can be expensive.

If your phone is an older model or you’re on a budget, consider exploring other repair alternatives. Screen repair shops and kiosks are popular, and some of them do a great job for a fraction of the price. However, you might not get the best repair.

You can also attempt the repair yourself, but if you make a mistake you could do more damage. If you want to try it yourself, you can buy iPhone screens online and most of them include a DIY toolkit.

If your iPhone isn’t working but you need to access certain files, you can still do that. To do so, you’ll need to activate Voice Control. This can be helpful for backing up and restoring your iPhone.

To do this, your phone screen will need to at least partially work. If so, try to make your way to Settings > Accessibility > Voice Control and turn that on.

If Siri’s enabled, you can enable Voice Control by saying “Hey Siri, turn on Voice Control.” Once enabled, you can access your iPhone without using the touchscreen.

If your iPhone stopped responding to touch after damage, heat, or salt water exposure, a repair is likely needed. However, a user might have activated Touch Accommodations, which could be the culprit. There are also rare cases where a software problem can cause the touchscreen to work and a factory reset could solve the problem.

No matter what happened to your iPhone screen, it’s important to get your device functional again. After all, we use our phone for everything nowadays, and not being able to use it can change how we engage in daily life.

Today, many of us rely on our smartphones to communicate, work, and play. Therefore, it can be quite alarming when they begin to act strangely – especially if you can’t get your phone to turn on at all.

One of the most concerning issues to plague smartphone users is a black screen, often referred to as the “black screen of death.” However, despite the harsh name, this issue can be remedied in several ways.

To fix a black screen on an iPhone or Android, the first (and easiest) step is to do a hard reset. This basically entails rebooting the phone’s software. A hard reset can be performed right on your phone, although the process differs depending on what type of device you own.

If you’re still staring at a blank screen, it’s possible that the cable connecting the logic board to the LCD screen has become disconnected. This can occur if you accidentally drop your phone a few times. In order to regain your screen’s functionality, the cable will need to be plugged back in.

If you want to repair a broken iPhone or Android this way, it’s best to seek help from a professional. While you may find DIY instructions online, you could risk causing irreparable damage to your device if you don’t know what you’re doing. So, if you suspect that your phone’s LCD cable is disconnected, search for a place in Las Vegas that fixes phones.

When your phone screen goes black randomly, it may be an indication that something is wrong with your operating system. In that case, a factory reset is often beneficial. During a factory reset, your device’s data and settings are completely wiped, returning the phone to its original state (i.e., the state it was in when you first purchased it).

Not sure how to do a factory reset on an iPhone or Android? The process is more involved than that of a hard reset but can still be done with moderate ease.

Keep in mind that this process takes longer than a simple hard reset – you may have to wait several minutes for your phone to restart. Once the process is complete, check to make sure the device has been restored to its factory settings. If you’re presented with the iOS Setup Assistant upon startup, you’ll know the reset was successful. From there, you can choose to restore your backed-up data.

Sometimes a power button can get stuck due to trapped gunk, debris, or sticky food. You can try to dislodge debris by pressing the button rapidly several times. In most cases, the most effective method for sticky buttons is applying a Q-tip with rubbing alcohol. Swab the area around the button to loosen up and extract dirt, dust, or whatever might be trapped in there. In some instances, you may have a broken button that will need to be repaired.

Your phone may not be charging properly if the charging port is blocked off due to grit or debris. Simply blowing on the port a few times can help. For a deeper clean, you can try gently scraping with a toothpick or using a cotton ball (or Q-tip) with rubbing alcohol. Some people recommend trying a low setting with a vacuum to extract dirt, but that can easily damage parts. Blowing out dirt with compressed air is a safer alternative.

Software issues with apps can sometimes cause a phone to act unpredictably. If you are noticing certain apps are crashing frequently, you should update them immediately. You should also consider deleting buggy apps for security and the health of your phone. If an app has crashed on your Android, you can force stop it through settings > apps & notifications -> see all apps -> force stop.

If you’re in need of smartphone repair, NerdsToGo can help. Our expert team understands the inner workings of a wide variety of devices. We’ll determine the root of the problem to get your phone up and running again as quickly as possible. And, if you don’t have time to visit our storefront for your smartphone repairs, we’ll come to you!

You can send your trade-in device at any time. However, if your device arrives more than 30 days after your new device was delivered, it"s assessed at current market value instead of your original quoted estimate. The current market value is determined by the trade-in terms and conditions.

Tip: After you start your trade-in process, you’ll get a confirmation email. To send your old phone to us, we’ll send you a kit with a prepaid envelope.

Before you send your old phone to us, you may want to transfer data from your old phone to your new one. Learn more about how to set up your Pixel phone.

The initial quote is based on the information that you provided, but the final value is based on what is observed during inspection. Any differences may negatively or positively impact device value.

If the trade-in device"s value matches the estimate: If you purchase a Pixel, we’ll credit the Post-Inspection Value (PIV) to the form of payment used for your phone purchase.

The estimate you get is based on the device specifications and condition you selected when you placed your trade-in order. We’ll do a full valuation when we receive your trade-in device.

If you get the confirmation email within the last 10–14 business days and a refund didn’t show up in your account, contact our support team. Refunds may take up to 14 business days to be applied to your card.

When you sign up for Pixel Pass, you’ll get a trade-in value estimate for your phone. You can choose to keep your prior phone or trade in your phone when you upgrade to reduce your monthly Pixel Pass bill going forward. Learn more about Pixel Pass subscriptions.

If your device is traded in before your first billing cycle: The estimated trade-in value is spread over the next 24 months of your Pixel Pass subscription, reducing your monthly bill.

After 24 monthly Pixel Pass payments, you fully own your phone. At that time, you decide if you want to stay subscribed and receive a new Pixel phone as an upgrade.

To find the app that causes issues, uninstall recently downloaded apps one by one. After you remove the app that causes the problem, you can reinstall the other apps you removed.

Slowly drag your finger to the bottom right corner without lifting. Try to move your finger slowly enough that you can count to 10 before reaching the opposite corner of the screen.

IMPORTANT: A factory data reset will remove all data from your phone. While any data stored in your Google Account will be restored, all apps and their associated data will be uninstalled. Before you perform a factory data reset, we recommend backing up your phone.

Every phone owner’s worst nightmare comes true the moment their phone slips out of their hands. No matter how experienced or careful you may be, it only takes one hasty moment for you to lose control of your precious possession only for it to come crashing down on its face. Although newer phone models are designed to withstand a certain level of impact on fall, the chances of the screen shattering still remain high.

A shattered screen may give you a mini heart attack at the initial inspection. However, if you look closely, the damage may not be as worse as it seems. While a broken LCD screen may cost you heavily, cracked glass is one of those

If you have previously taken your cell phone for repairs, you may have encountered 2 very different replacement part options i.e, the glass and the LCD screen. The former is the exterior layer on your phone display which is specifically engineered for durability and to endure the impact of the sudden fall. If the glass screen of the phone gets cracked, its repair will not dig a huge hole in your pocket. Hence, the replacement of the glass screen is inexpensive. However, the latter, LCD screen (liquid crystal display) is entirely responsible for the display and the touch response that you enjoy on your sophisticated electronic device. Therefore, if the LCD is damaged, you are looking at significant repair or replacement costs.

If your cell phone’s glass has been broken, it may look like a normal glass cracked, and you still may be able to use your device for typing, etc. However, the chances that your device’s camera will work are low, but the vital functions such as calling and typing tend to be normal, albeit with minor distortions due to the cracked glass.

However, if the digitizer or the LCD is compromised in the fall, there will be major issues in the functioning of your phone. Hence, look out for the following signs that indicate that the LCD has been damaged completely.

Unresponsive touch screen: As mentioned before, if only the upper glass is broken, your phone may still respond to the touch and voice commands. However, if the LCD has been compromised, your touch screen will become unresponsive, in certain areas or completely.

Pixelated screen: A distorted screen can also indicate a damaged LCD. This can look like multi-colored dots, single or multiple lines of discolorations, rainbow lines, etc. So, inspect the screen closely before bringing your phone to T.I.N.Y. Repairs for a same-day cell phone screen replacement in Queens.

Black screen: Whether it is an android or an iPhone, if your phone showing a black screen or black spots on the screen on turning it on, this solidifies the damaged LCD. You may still hear sounds if you have an incoming call or text message. However, a clear picture or responsive touch screen or display is highly unlikely. Therefore, it is best to have a skilled phone repair technician take a look to determine the extent of the damage so the repairs can be made accordingly.

Clearly, damaged phone screens are one of the common issues for sophisticated gadgets. However, every fall doesn’t mean a hole in your pocket. Bring your device to the expert at the T.I.N.Y. Repairs to get the needful repairs. Our experts will closely examine the extent of the damage and provide the same-day cell phone screen replacement at the best prices in Queens, New York.