ea edip tft display series pricelist

In our webshop you will find touch panels with and without display, such as TFT, OLED and monochrome graphic displays. The touchpanel controller and driver for displays is partly included, interface is I²C bus, SPI, RS-232 or USB.

Brilliant TFT color displays in IPS technology from 0.9". Brightness of more than 1,000 cd/m² and viewing angles up to ±85° (IPS) without color shift. Different interfaces like 24-bit RGB, LVDS, SPI, 8-bit data bus.

OLED provide much higher contrast than LCD, but this technology isn"t necessarily suitable for sunlight. On the other hand, they are extremely fast, even at -40°C (or +85°C). OLED displays are very flat and do not need any backlight, so they are ideal for handheld devices. Control of the text and graphic displays via SPI.

Monochrome displays and displays in color as TFT with serial interface RS-232, SPI or I²C. The complete communication is done via only one interface. Also including touch panel communication, so serial bidirectional (UART). Adaptations to RS-485, RS-422, TWI etc. are easily possible.

for color displays TFT and IPS, as well as for OLED and COG displays. For testing and firt putting into operation, also accompanying development. Easy commissioning of the starter kits without programming knowledge, test directly on the device and in the target environment, also suitable for incoming goods test.

1.5" to 10.1" displays with touch are often used as operating units (HMI). Our uniTFT and eDIP series are ideal for operating and monitoring or controlling industrial devices. Designed for installation in a housing and for easy connection via a serial interface.

You can therefore create the screen layout you want with just a few, easily understood commands. All the commands are based on coordinate specifications and can therefore be applied and moved to the nearest pixel.

Helpful for the development, but also powerful for 1st. steps is the simulator software for the EA eDIP240-7. With that internal EEPROM can be used to define some pre-defined screen layouts. Software is available for can be downloaded here immediately: LCD Tools for Windows.

Like all DIP modules, the displays are simply inserted in the PCB and soldered in place. No screws, distance sleeves or cables are required, thus saving material costs and simplifying construction. This results in a saving of between 2 and 4 minutes per module during assembly!

Optionally, we can also supply this display with an analog touch panel which can be used for all types of input. An integrated touch controller is responsible for representing and labelling the keys as well as for their interpretation. What is more, the shape, size and number of the keys can be modified whenever required at runtime. This permits a clear, well-organized screen layout that helps eliminate operating errors.

Additionally to the well-proved versions with a resistive touch panel currently we do provide 2 displays with 4.3" and 7" alternatively equipped with a capacitive touch panel: EA eDIPTFT43-ATC (4.3") and EA eDIPTFT70-ATC (7").

The advantage is more transperency that leads for both sizes to again more brightness and a very contrasty display. The surface is made of glass which is hard profen against scratch, it is hygienic and resistant against all cleaning stuff. The design with its black frame grants your equipment a valuable, modern optic.

An essential detail with industrial applications ist the usability with and without hand gloves. Even when the display is put behind a 3mm glass plate it may be operated perfectly.

EA 9980-TFT INTERFACEBOARD FOR TFT DISPLAYS INCL. LED DRIVER ADAPTORBOARD EA TFT DISPLAYS ZIFF CONNECTOR 50 PINS, 1.0 mm AND 39 PINS 0.3 mm LED DRIVER INCLUDED (ADJUSTABLE 5~95 mA) SUPPORTS TOUCH PANEL VIA ZIFF CONNECTOR 6 AND 10 PINS TOP AND BOTOM CONTACT FPC CONNECTORS DISPLAY VISIONS GmbH Zeppelinstraße 19 D-82205 Gilching Germany Fon: +49 (0)8105-7780 90 Fax: +49 (0)8105-7780 99 e-Mail: info@lcd-module.de Web: www.lcd-module.com

EA 9980-TFT GENERAL The EA 9980-TFT is an interface board suitable for EA TFT displays. The board is designed to provide an easy and fast connection to the EA TFT displays. The 2.54 mm pitch allows easy connection to breadboards of various microcontroller manufacturers as well as to the Arduino- or Raspberry PI -world. HARDWARE The board consists of two sections. The top section is the display interface, including a LED-backlight driver. The bottom section has FPC-connectors with up to 10 positions for interfacing a potential touch panel. It can be removed from the other part to...

EA 9980-TFT Generally, the board can be used with every EA TFT Display. Please see the list for suiting products. Ordering Code EA TFT020-23AINN EA TFT020-23AITC EA TFT028-23AINN EA TFT028-23AITC EA TFT035-34AINN EA TFT035-34AITC EA TFT035-32AINN EA TFT035-32ATS EA R480X-43ALW EA TFT043-42BITC EA TFT043-42ANN EA TFT043-42ATS EA W800X-50AILW EA TFT050-84ANN EA TFT050-84BTS EA TFT052-41ATS EA TFT052-41ATS EA TFT057-32ANN EA TFT057-32ATS EA R1024X-70BLW EA R1024X-70BLWTS EA TFT070-84ANN EA TFT070-84ATS EA W1280X-101ALW The LED-Driver is connected to VDD and GND. There are 6 solder bridges to...

EA 9980-TFT As an example, the wiring diagram for the EA TFT020-AITC using SPI is as follows. Most of the pins are not used and need to be set to GND. Only some Jumpers are needed. Printing and typographical errors reserved. ELECTRONIC ASSEMBLY reserves the right to change specification without prior note.

This TFT kit comprises one of our smallest TFT displays and an adapter board that breaks the tail connections out to a simple 2x5 10-position header. The adapter board includes a backlight driver, so only a single 3.3v power input is required to bring up the display.

The adapter board is specifically designed for use with this display, so it fits directly behind the display with no PCB overlap. The display is a 1.3", full color, IPS display that looks incredibly sharp.