ea edip tft display series quotation

You can therefore create the screen layout you want with just a few, easily understood commands. All the commands are based on coordinate specifications and can therefore be applied and moved to the nearest pixel.

Helpful for the development, but also powerful for 1st. steps is the simulator software for the EA eDIP240-7. With that internal EEPROM can be used to define some pre-defined screen layouts. Software is available for can be downloaded here immediately: LCD Tools for Windows.

Like all DIP modules, the displays are simply inserted in the PCB and soldered in place. No screws, distance sleeves or cables are required, thus saving material costs and simplifying construction. This results in a saving of between 2 and 4 minutes per module during assembly!

Optionally, we can also supply this display with an analog touch panel which can be used for all types of input. An integrated touch controller is responsible for representing and labelling the keys as well as for their interpretation. What is more, the shape, size and number of the keys can be modified whenever required at runtime. This permits a clear, well-organized screen layout that helps eliminate operating errors.

Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.

Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.

TFT stands for thin-film transistor. TFT displays use thin-film transistor technology, which involves adding a layer to an LCD to produce even better and sharper images. Each sub-pixel of the TFT contains a tiny integrated transistor. This allows the sub-pixels to be switched on and off individually. The technology makes allows screens to present bright, vivid high-resolution colour images. What’s more, the response time is fast, which offers obvious benefits, especially when it comes to video playback.

Pedak’s TFT displays have been specially designed for industrial applications. They offer a long service life of 50,000 hours and an operating temperature range of -20°C to +70°C. In addition, TFT displays usually have a long uptime of up to ten years!

Backlighting is provided by bright, high-quality LEDs. UNI TFT displays have a brightness of more than 1000cd/m², so they are easy to read even in direct sunlight.

Ready to install and fully functional out of the box. Can be supplied as a passive display or as a programmable display with IPS and IC2 interface. They are available in a variety of sizes.

If you have an application that is crying out for a new display but you can’t see the wood for the trees, then you can stop worrying because Pedak can help you choose the right one. Whatever the size, from freezers or ovens, basic characters only to touch displays. We analyse the whole situation and identify what expectations the display has to meet. So please contact us, ask our specialists which display you need we will be happy to help out.

4,3" TFT display EA TFT043-42ANN with 24-bit RGB interface. Long-term available for industrial applications. Pin assignment is compatible with the ELECTRONIC ASSEMBLY EA TFT series. The wide operating temperature ranges is -20..+70°C. White LED backlight integrated. This type is also available with touch panel.

TFT GRAPHIC DISPLAY WITH BULIT-IN GRAPHIC FUNCTIONS 480x272 DOTS, 16-BIT (65,536) COLORS WITH LED BACKLIGHT LANDSCAPE AND PORTRAIT MODE (272x480) BY COMMAND 4MB ON BOARD FLASH FOR FONTS, PICTURES, ANIMATIONS AND MACROS POWER SUPPLY 180mA 8 PRE-DEFINED FONTS, CAN BE EXPANDED FONT ZOOM FROM 2mm TO about 80mm, TURNABLE IN 90� STEPS 3 DIFFERENT INTERFACES ON BOARD: RS-232, I�C-BUS OR SPI-BUS POSITIONING ACCURATE TO THE PIXEL WITH ALL FUNCTIONS DRAW LINE, PLACE A DOT, AREA, BARGRAPH... PICTURES AND ANIMATIONS MIX TEXT AND GRAPHIC MULTI-LINGUAL WITH MACRO PAGES BACKLIGHT BRIGHTNESS BY SOFTWARE ANALOGUE TOUCH PANEL: VARIABLE GRID FREE DEFINABLE KEY AND SWITCH 8 DIGITAL IN- AND 8 DIGITAL OUTPUT 2 ANALOGUE INPUTS COMFORTABLE TO USE

TFT 480x272 DOTS, WHITE LED BACKLIGHT AS ABOVE, BUT WITH TOUCH PANEL MOUNTING BEZEL (ALUMINIUM), BLACK ANODIZED PROGRAMMER FOR USB INCL. CABLE, DVD (WIN2000/XP/VISTA/7) INTERFACE-EXPANDER (RS-232, RS-485, SPI, I�C) FOR EA 9777-2USB SOCKET 1x20, 4.5mm HEIGHT (1 PC.) STARTER KIT: B254-20 EVALeDIPTFT4

Date July, 22nd. 2008 March 2009 June 2009 November 2009 May 2011 January 2012 Type additional command: ESC YD, ESC VM, ESC YX - bug fix - additional command: ESC ZB - bug fix - bug fix "bargraph" and "clear touch" - additional functions: Instruments, extended Ports - additonal functions: X/Y-graph, String table Old New 1st. Edition Reason / Description

GENERAL The EA eDIP series of displays are the world"s first displays with integrated intelligence. In addition to a variety of integrated fonts that can be used with pixel accuracy, they offer a whole range of sophisticated graphics functions. The displays are ready for operation immediately with an operating voltage of 5V. They are controlled via one of the 3 integrated interfaces: RS-232, SPI or I�C. The displays are "programmed" by means of high-level language-type graphics commands. There is no longer any need for the time-consuming programming of character sets and graphics routines. The ease of use of this display with its touch panel dramatically reduces development times. HARDWARE The display is designed to work at an operating voltage of +5V. Data transfer is either serial and asynchronous in RS-232 format or synchronous via the SPI or I�C specification. To improve data security, a simple protocol is used for all types of transfer. ANALOG TOUCH PANEL All versions are also available with an integrated touch panel: You can make entries and menu or bar graph settings by touching the display. The labeling of the "keys" is flexible and can also be changed during runtime (different languages, icons). The drawing of the individual "keys" and the labeling is handled by the integrated software. LED ILLUMINATION All displays are equipped with modern, energy-saving LED illumination. Brightness can be varied 0~100% by command. In 24-hour operation, the illumination should be dimmed or switched off as often as possible to increase their lifetime. SOFTWARE This display is programmed by means of commands, such as Draw a rectangle from (479,271). No additional software or drivers are required. Strings and images can be placed with pixel accuracy. Text and graphics can be combined at any time. Different character sets can be used at same time. Each character set and the images can be zoomed from to 8 times and rotated in 90� steps. With the largest character set, the words and numbers displayed will fill the screen. ACCESSORIES Evaluation-Board (Programmer) for internal data flash memory The display is shipped fully programmed and with all fonts. The additional Evaluation-Board is thus generally not required. However, if the internal character sets have to be changed or extended, or if images or macros have to be stored internally, the Evaluation-Board EA 9777-2USB, which is available as an accessory, will burn the data/images you have created into the on-board data flash memory (4 MB) permanently. The Evaluation-Board runs under Windows and is connected to the PC"s USB interface. It is shipped with an interface cable and the installation software. The Evaluation-Board is equipped with serveral LEDs, pushbottons and potentiometer to test all peripherial modes of the eDIP. Interface-Expansion for Evaluation-Board: Wtih the expansion EA 9777-2PE for the Evaluation-Board all interfaces of the display are made available with the help from small adapter boards: RS-232, RS-485, SPI, I�C, RS-232 (CMOS level). Further information you will find in the datasheet of the Evalution-Board.

Display Visions (previously Electronic Assembly) markets a broad spectrum of top-quality industrial displays to customers in a number of industries ranging from process automation and machinery manufacturing to IT. The product portfolio extends from simple seven-segment instrumentation displays to sophisticated color touchpanel displays for use as HMI or in complex system controllers. Focus is on LCD, OLED and TFT displays at high quality with a guaranteed long term availability based on the vision of making things easy. The wide-ranging portfolio includes products designed for extremely low power consumption, serial TFT, zero power, object-based multifunction control units with PCAP and other ready-to-integrate modules for special markets and applications such as Cyrillic fonts.

This is manufactured by Electronic Assembly GmbH. The manufacturer part number is EA EDIPTFT43-ATP. It has typical 3 weeks of manufacturer standard lead time. Touchscreen Included - resistive . The product ea edip, is a highly preferred choice for users. Has a 4.3 diagonal screen size. It is available in the standard package of 1. It has classic red, green, blue (rgb) graphics. It features a remarkable tft - color display. Features 480 x 272 dot fixels. Its typical moisture sensitivity level is 1 (unlimited). Provides a 98.70mm w x 57.50mm h viewing area. Typically has a transmissive display mode. A bespoke product is i²c, rs-232, spi interface. It features resistive graphic lcd display module transmissive red, green, blue (rgb) tft - color i²c, rs-232, spi 4.3. Alternative Names include 1481-1124. Backlight Options - led - white. The electronic assembly gmbh"s product offers user-desired applications.

EA 9980-TFT INTERFACEBOARD FOR TFT DISPLAYS INCL. LED DRIVER ADAPTORBOARD EA TFT DISPLAYS ZIFF CONNECTOR 50 PINS, 1.0 mm AND 39 PINS 0.3 mm LED DRIVER INCLUDED (ADJUSTABLE 5~95 mA) SUPPORTS TOUCH PANEL VIA ZIFF CONNECTOR 6 AND 10 PINS TOP AND BOTOM CONTACT FPC CONNECTORS DISPLAY VISIONS GmbH Zeppelinstraße 19 D-82205 Gilching Germany Fon: +49 (0)8105-7780 90 Fax: +49 (0)8105-7780 99 e-Mail: info@lcd-module.de Web: www.lcd-module.com

EA 9980-TFT GENERAL The EA 9980-TFT is an interface board suitable for EA TFT displays. The board is designed to provide an easy and fast connection to the EA TFT displays. The 2.54 mm pitch allows easy connection to breadboards of various microcontroller manufacturers as well as to the Arduino- or Raspberry PI -world. HARDWARE The board consists of two sections. The top section is the display interface, including a LED-backlight driver. The bottom section has FPC-connectors with up to 10 positions for interfacing a potential touch panel. It can be removed from the other part to...

EA 9980-TFT Generally, the board can be used with every EA TFT Display. Please see the list for suiting products. Ordering Code EA TFT020-23AINN EA TFT020-23AITC EA TFT028-23AINN EA TFT028-23AITC EA TFT035-34AINN EA TFT035-34AITC EA TFT035-32AINN EA TFT035-32ATS EA R480X-43ALW EA TFT043-42BITC EA TFT043-42ANN EA TFT043-42ATS EA W800X-50AILW EA TFT050-84ANN EA TFT050-84BTS EA TFT052-41ATS EA TFT052-41ATS EA TFT057-32ANN EA TFT057-32ATS EA R1024X-70BLW EA R1024X-70BLWTS EA TFT070-84ANN EA TFT070-84ATS EA W1280X-101ALW The LED-Driver is connected to VDD and GND. There are 6 solder bridges to...

EA 9980-TFT As an example, the wiring diagram for the EA TFT020-AITC using SPI is as follows. Most of the pins are not used and need to be set to GND. Only some Jumpers are needed. Printing and typographical errors reserved. ELECTRONIC ASSEMBLY reserves the right to change specification without prior note.

This TFT kit comprises one of our smallest TFT displays and an adapter board that breaks the tail connections out to a simple 2x5 10-position header. The adapter board includes a backlight driver, so only a single 3.3v power input is required to bring up the display.

The adapter board is specifically designed for use with this display, so it fits directly behind the display with no PCB overlap. The display is a 1.3", full color, IPS display that looks incredibly sharp.

The provided display driver example code is designed to work with Microchip, however it is generic enough to work with other micro-controllers. The code includes display reset sequence, initialization and example PutPixel() function.

Please see the DT028CTFT for reference designs. The schematics between the A and the C are the same with the exception that the A does not have the IPS interface.