seeed lcd displays for raspberry pi supplier

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Display Seeed studio 7 " with a resolution of 720 x 1280 px with a wide-angle IPS. It works with Raspberry Pi in versions 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero and Zero W via the HDMI and USB cable.

The screen is small, lightweight and easy to carry. Compatibile with most platforms with HDMI. In addition, the display has an adjustable backlight, which is controlled using the buttons located on the back.

In order to run screen, you must connect the device to a Raspberry Pi via the supplied wire: HDMI and microUSB. The screen works with the latest operating system Raspbian without the need to install drivers. However, in order that the screen displays the picture properly, you should change the resolution in the configuration file. To do this, open the file config.txt and then at the end add the following statements.

Interact and control your projects and experiments in a whole new way with the Seeed HDMI LCD touchscreen display. Designed as a monitor for your Raspberry Pi, the 10.1-inch display has a 1280-by-800p resolution and can be connected via the HDMI or USB input. Unlike resistive touchscreens, which rely on pressure, capacitive touchscreens use the conductive properties present on your skin. This creates a more touch-sensitive surface that responds better to touches of all types. Plus, it’s not only compatible with Raspberry Pi, but can be used with Banana Pi, Banana Pro, Raspbian, Ubuntu, and Windows systems.

This is a Raspberry Pi Display specially designed for Model B+ and Raspberry Pi 2 Model B. It features 2.8’’ TFT LCD and resistive touch panel, 65K colors and 320x240 pixel resolution. The display integrate touch driver xx2046, communicating with Raspberry Pi through High Speed 48MHz SPI connection. With the touch panel, you could play the Raspberry Pi without the need for a mouse.

It’s very easy to setup, without the need for a cable or extra power supply, it can be directly attached onto the Raspberry Pi. We have packaged a system kernel with the LCD driver for you, you can upload to many OS for Raspberry pi such as Raspbian Debian fedora.ubunbu

LCD displays and breakout boards for Arduino, Raspberry Pi, Grove and Featherboard. Our range includes 16x2 to 20x4 monochrome LCD displays, 1.8" to 2.8" 18-bit colour displays and the really impressive looking 8" full HDMI LCD display! With the majority of the boards coming pre-soldered it makes them easy to add into any project where you want visual output.

Waveshare 20109 - 5inch Capacitive Touch Screen LCD (H) Slimmed-Down Version, 800×480, HDMI, Toughened Glass Panel, Low Power Consumption - 5inch HDMI LCD (H) V4

Waveshare 11750 - 10.1inch Capacitive Touch Screen LCD (B), With Case And Toughened Glass Cover, 1280×800, HDMI, IPS Screen, Supports Raspberry Pi And PC, Low Power Consumption - 10.1inch HDMI LCD (B) (with case)

Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi, a larger version of our popular Inky pHAT display, with more than 5x the number of pixels, and available in three colour schemes - red/black/white,...

Waveshare 22689 - 1.9inch Segment E-Paper Module, 91 Segments, I2C Bus, Ideal For Temperature And Humidity Meter, Humidifier, Digital Meter - 1.9inch Segment e-Paper Module

A high-resolution 8", IPS, 1024x768, HDMI display, with Pimoroni-made display driver board and keypad, that"s perfect for building into projects like arcade cabinets, or just use it as a handy display for your Raspberry Pi!

Build a full-featured media center capable of playing nearly all of your digital media using any 40 pin Raspberry Pi and the Media Center HAT Raspberry Pi touchscreen display. Native support in...

Inky wHAT is a 400x300 pixel electronic paper (ePaper / eInk / EPD) display for Raspberry Pi, a larger version of our popular Inky pHAT display, with more than 5x the number of pixels - red/black/white version.

If you"re looking for the most compact li"l color display for a Raspberry Pi B+, Pi 2, & Pi 3 (most likely a Pi Zero) project, this might be just the thing you need!

In honour of Raspberry Pi"s 10th birthday, we"ve fused a RP2040 microcontroller with an EPD display to make a stylishly monochrome, maker friendly, e-paper badge(r)...

There’s just so much fun to be had by adding a display to your projects, and now with so many different sizes, shapes and display technologies – it’s more exciting than ever before.

We stock a huge variety of displays for every project and microcontroller, including LCDs, TFTs, OLEDs, Paper displays and more. We also stock adapters and accessories for your traditional HDMI displays.

Low-power options are a popular choice for makers. Our ePaper, OLED and TFT products offer crisp detail which can be powered by your microcontroller without the need for a separate power supply.

Want some retro appeal to your project? Check out our Nokia 5110 LCD display, or our range of classic 16x2 and 20x4 LCDs which come in a variety of colours.

Carrying a GrovePi+ board together with 12 carefully selective Grove sensors with 10 pieces cables , this starter kit gets you up and running with the Raspberry Pi quickly. Just slip the GrovePi+ board over your Raspberry Pi and connect sensors to the board, you"re ready to start hardware playing and prototyping with the powerful platform.

About The GrovePi+, It is stacked on top of the Raspberry Pi without the need for any other connections. Communication between the two occurs over the I2C interface. All Grove modules connect to the universal Grove connectors on the GrovePi+ shield via the universal 4 pin connector cable.

About Grove modules, which work on analog and digital signals, connect directly to the ATMEGA328 microcontroller on the Grove Pi+. The microcontroller acts as an interpreter between the Raspberry Pi and the Grove sensors. It sends, receives, and executes commands sent by the RaspberryPi.