3.2 tft lcd module display datasheet manufacturer

ER-TFT032-2 is 240x320 dots 3.2 " color tft lcd module display with ILI9320 controller and optional 4-wire resistive touch panel,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 16-bit parallel interface. .FPC is soldering type,there is no need for zif connector.Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

WF32DTLAJDNT0 is a 3.2 inch 240x320 portrait mode TFT LCD module with Resistive Touch Panel (RTP). This module is built in with ILI9341 driver IC, it supports 8080 MCU 8bit /9bit/16bit/18bit/ SPI (3 Wire/4 Wire) interface. The brightness of WF32DTLAJDNT0 module is 350 nits typical value, contrast ratio 500:1 (typical value), view direction 6 o"clock, gray scale inversion direction 12 o"clock, glare surface glass. If customers require high brightness backlight, please choose WF32DSLAJDNT0.

Model 1: NL320006P0, Size: 3.2 inch, Configuration: CPT + ILI9488, Resolution: 320 * 240, Angle of view: 70 ° Brightness: 400 CD / M2, Viewing angle: 70, PINs: 24PIN, Interface: MIPI

Model 2: NL320004S0, Size: 3.2 inch, Configuration: HSD + ST7789, Resolution: 240 * 320, Angle of view: 70 °, Brightness: 400 CD / M2, Viewing angle: 45, PINs: 24PIN, Interface: CPU 8 bit

Different displays have different characteristics, just tell Panox Display your application, and operating environment, Panox Display will suggest a suitable display for you.

But Panox Display is not a school, if customers don`t know the basic knowledge to design circuit boards, we suggest using our controller board to drive the display.

First, you need to check whether this display has On-cell or In-cell touch panel, if has, it only needs to add a cover glass on it. If not, it needs an external touch panel.

If you don`t know or don`t want to write a display program on Raspberry Pi, it`s better to get an HDMI controller board from us, and Panox Display will send a config.txt file for reference.

This 3.2 inch TFT LCD module adopts TN type LCD with 240*320 resolution. CTP touch and RTP touch can be added extraly.  Based on the LCD product’s high stability and long life cycle characteristics, this 3.2-inch LCD module can be used in a wide range of industrial and consumer electronics.

As an option, you can order this TFT pre-assembled onto a breakout/carrier board. The board allows easy prototyping through its 0.1" headers. You can also include the carrier board in your end product to simplify construction and assembly. The carrier board contains a constant-current switching LED driver. The PCB is sized to fit neatly within the outline of the display, with a total weight of 51 grams.

We believe in open source hardware designs for Crystalfontz carrier boards and development kits. Under the Datasheets & Files tab is a downloadable zip file that contains everything you need to manufacture your own carrier boards: Gerber files, PADs source schematic and layout, and full BOM.

This kit consists of a CFAF240320B1-032T-TS TFT LCD module mounted on a carrier board. The carrier board supports a current driver for the LED backlight of the display. It is available under Additional Options on the website page for CFAF240320B1-032T-TS.

RFJ320D-ALW-DNS is a 3.2-inch color active matrix TFT-LCD display module with resistive touch screen . The dimension size of this module is 55.04x77.6 mm, size of active area is 48.6x64.8 mm (3.2”diagonal), and its resolution is 240x320 pixels. This TFT display module adopts controller IC ILI9341 supporting 80 MCU 8bit/9bit/16bit/18bit/SPI(3-Wire/4-Wire) Interface. This 3.2-inch TFT LCD module has brightness 350 cd/m2 with contrast ratio (typical value) 500:1. RFJ320D-ALW-DNS TFT LCD module power supply voltage is 2.5~3.3V (typical 2.8V). The module works within temperature -20 to +70℃, storage temperature ranges from-30 to +80℃.