3.2 tft lcd module display datasheet supplier

ER-TFT032-2 is 240x320 dots 3.2 " color tft lcd module display with ILI9320 controller and optional 4-wire resistive touch panel,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 16-bit parallel interface. .FPC is soldering type,there is no need for zif connector.Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

As an option, you can order this TFT pre-assembled onto a breakout/carrier board. The board allows easy prototyping through its 0.1" headers. You can also include the carrier board in your end product to simplify construction and assembly. The carrier board contains a constant-current switching LED driver. The PCB is sized to fit neatly within the outline of the display.

This kit consists of a CFAF240320A-032T TFT LCD module mounted on a carrier board. The carrier board supports a current driver for the LED backlight of the display. It is also available under Additional Options on the website page for CFAF240320A-032T.

WF32DTLAJDNT0 is a 3.2 inch 240x320 portrait mode TFT LCD module with Resistive Touch Panel (RTP). This module is built in with ILI9341 driver IC, it supports 8080 MCU 8bit /9bit/16bit/18bit/ SPI (3 Wire/4 Wire) interface. The brightness of WF32DTLAJDNT0 module is 350 nits typical value, contrast ratio 500:1 (typical value), view direction 6 o"clock, gray scale inversion direction 12 o"clock, glare surface glass. If customers require high brightness backlight, please choose WF32DSLAJDNT0.

3.2-inch TFT Color LCD Module is a TFT LCD Screen Module, 40pins interface, not just a LCD break but include the Touch, SD card and Flash design. So it’s a powerful extension module for your project.

The LCD is 32044PA. It’s a 262K color, 400*240 (resolution), 3.2 inch Widescreen (16:9) TFT LCD screen.The LCD has a wide viewing angle, the contrast is also very suitable.

TFT 3.2" 400*240 With SD Touch Module is designed with a touch controller in it . The touch IC is XPT2046/HR2046, and touch interface is included in the 40 pins breakout.

Another useful extension in this module is the SD Card socket. It use the SPI mode to operate the SD card, the SPI interface include in the 40pins breakout.

There is a reserve extension design in this module, that’s the external flash. It’s leave the pad and the pins out for the SST25VF016B Flash. So when you need, you can easily add a external flash for your project.

TFT 3.2" 400*240 With SD Touch Module layout a 40 pins interface for your project, the interface include TFT pins、SD card pins、Touch screen pins and the Flash pins.

Resolution: 240(RGB) x 400Interface: CPU 18 bits/16 bits/8 bitsColor Depth: 262K/65KTechnology Type: a-SiPixel Pitch (mm): 0.174X0.174Pixel Configuration: R.G.B. Vertical StripeDisplay Mode: TM with Normally WhiteSurface Treatment(Up Polarizer): Clear Type(3H)Viewing Direction: 6 o’clockGray Scale Inversion Direction: 12 o’clockLCM (W x H x D) (mm): 47.60x80.90x2.6Active Area(mm): 41.76x69.60With /Without TSP: Without TSPWeight (g): TBDLED Numbers: 4 LEDsDriver IC: HX8352-AElectrical Characteristics

The pins named with “D/T_” are the Touch IC output pins; the pins named with “SD_” are SD pins; the pins named with “F_” are the SST25VF016B Flash IC pins; others are TFT pins.

It is compatible with 3.3/5V operation voltage level. TFT power is 2.8~3.3V and the module with PCB have 3V Regulated IC, so it can input 5V, but the data pins can not be more than 3.3V.

968 3.2 inch tft lcd module display products are offered for sale by suppliers on Alibaba.com, of which lcd modules accounts for 83%, segment displays accounts for 1%.

A wide variety of 3.2 inch tft lcd module display options are available to you, You can also choose from datasheet, 3.2 inch tft lcd module display,as well as from tft, ips, and standard 3.2 inch tft lcd module display,

590 tft lcd touch module 3.2 products are offered for sale by suppliers on Alibaba.com, of which lcd modules accounts for 70%, lcd touch screen accounts for 16%.

A wide variety of tft lcd touch module 3.2 options are available to you, such as original manufacturer, odm.You can also choose from datasheet, tft lcd touch module 3.2,as well as from tft, ips, and standard tft lcd touch module 3.2,

The 3.2 inch TFT LCD module is a special design for Raspberry Pi for portable application. It features a 3.2” display with 320x240 16bit color pixels and resistive touchscreen.

The 3.2 inch TFT LCD module is a special design for Raspberry Pi for portable application. It features a 3.2” display with 320x240 16bit color pixels and resistive touchscreen.

The 3.2 inch TFT LCD module is a special design for Raspberry Pi for portable application. It features a 3.2�display with 320x240 16bit color pixels and resistive touch screen. The LCD is well mated with Pi board and interface with Pi via the high speed SPI port, and support console, X windows, displaying images or video etc. It also provides 4 press buttons for user defined functions.

-LCD control IC ILI9341, touch panel controller XPT2046; Adopt industrial TFT LCD modules; High-grade gold-plated double yellow-module pin, better electrical properties; -Compatible with all hot Atom development boards, straight into the straight; -Application is fully open source; -Bottom-driven technical support LCD, a transaction, is a friend forever;

-3.2 inch, 240*320 resolution, TFT touch screen; -Display driver IC ILI9341, touch screen driver for XPT2046; 16bit-display interface parallel interface, support for 6800 and 8080 bus interface supports STM32 FSMC bus interface, crowding the screen faster; -Touch screen interface for the SPI interface, so that the line less, driving is simple; -Onboard-a large current LDO voltage regulator, 5V and 3.3V power supply; -Onboard PWM backlight control circuit to support IO control and PWM dimming control; -Modules with SD cards, digital photo frames and other experiments can be done; -Reserved SPI FLASH pad, you can extend the welded fonts chips; -Supports landscape and portrait displays, support split the screen display; -Support for 262,000-color RGB display and displayed good quality; -Graphic display of the screen controller with internal 172800 byte data storage; Punctuality Atom-interface compatible series of interface Development Board; Patch-machine production, stable and reliable hardware;

-Module design principle; -LCD controller data manual; -XPT2046 data sheet; -Module schematic diagram; -Module dimensions; -LCD package; MOD software-text; -Picture taking mode software; -C51 code wiring tutorial; -STM32 code wiring tutorial;