sanitizing touch screen monitors manufacturer

During these unprecedented times, it is crucial to stay up to date with any and all methods to stay healthy. Here at TRU-Vu, we value our customers’ health and safety. For this reason, we have put together some guidelines for cleaning and disinfecting TRU-Vu touch screen monitors.  This can be achieved without causing any damage to the touch screen

Avoid using abrasive cloths, such as rags or paper towels, as they can spread lint and/or even damage the screen. Instead, use only non-abrasive cloths, such as soft lint-free cloth, in order to avoid scratching the monitor.

Dampen a new clean, non-abrasive cloth with a disinfectant recommended by the CDC: a household bleach solution (1/3 cup of bleach per gallon of water) or Isopropyl alcohol ( 71% to 85% alcohol). Be sure to squeeze any excess liquid off of the cloth. Do not spray the solution directly onto the touch screen.

Apply the solution to a soft cleaning cloth; do not spray directly onto the touch screen. Wear gloves during the cleaning process. Finally, discard both the gloves and the cleaning cloth following the cleaning process.

Certainly, If you have any questions, or require further assistance with cleaning your TRU-Vu touch screen monitor, please contact us at #847-259-2344.

With over 540 LCD monitors and touch screens on our site, selecting the ideal equipment, or touch screen solution may be a bit overwhelming.To help narrow-down the choices, check out ourAdvanced Search Tool.For example, this enables you filter by your own specific search requirements.

With the heightened focus on sanitizing hard surfaces that your employees or possible guests interact with, many customers have asked us our recommended practices to clean and disinfect CallConnect touch screen call button monitors.  But, these guidelines may also apply to other electronic display surfaces such as Point of Sale terminals or walk up customer ticket kiosks. To be safe, we suggest you check with your PoS suppliers on their recommended cleaning and sanitizing suggestions.

Do not get liquids inside the unit. Do not spray directly on the monitor screen. Instead, use wet wipes, a sprayed cloth or a dampened cloth with the excess moisture squeezed off.

Be mindful that the CallConnect call button monitors are touch screen.  So as you clean the surface, you may inadvertently change the view.  Don’t worry, the monitors are designed to automatically go back to the “home” screen after a certain time period.  If you have any questions on cleaning this or other Venue Valet products, please contact us through one of support methods below:

As the COVID-19 pandemic rages across the globe, cleaning touch panel surfaces for users" peace of mind has become necessary because the virus can remain viable on surfaces for hours to days. Depending on type and model, AMT has compiled cleaning methods that we will share with you. We recommend carefully using only certain chemicals to clean both AMT projected capacitive (PCAP) and resistive touch panels.

According to US CDC, alcohol and bleach can be used to clean frequently touched surfaces. AMT has a rigorous testing structure for certifying the materials used in our products are suitable in terms of performance, durability, reliability, etc. The touch surface of AMT PCAP and resistive touch panels can withstand both industrial chemicals and household products such as acetone, hexane, laundry detergent, etc.

Ammonia based glass cleaners (typically 5 - 10% ammonia), 1: 100 bleach: water solution, or 75% alcohol can be used to clean the surface of AMT PCAP and resistive touch panels.

● Cleaning solutions containing bleach, alcohol, and ammonia are corrosive to touch panel surface coatings and ITO film. So, you should not leave the solution on the touch panel surface for more than 2 minutes. Make sure to remove all residue when finished cleaning.

Several of the touchscreen display manufacturers have issued their recommended guidelines for cleaning and disinfecting their hardware. We have put together this list and are continuing to follow up with our customers to ensure they have these procedures for the type of touchscreen interactives that are in their museums or attractions.You can access the CDC general guidelines by clicking here and the resources for community-based organizations here.

Gently wipe the screen with the damp part of the microfiber cloth to remove the dust or fingerprints from the screen. Then, use the dry part of the microfiber cloth to soak up the leftover water.

The TSItouch Screen Cleaning Kit includes 200ml of screen cleaner in a spray bottle and a soft microfiber cloth. Our screen cleaner is a high-performance product that is safe to use on any screen. It has passed ROHS standards and SGS testing for stopping bacterial growth. It removes dust, fingerprints, and streaks without harming your screen.

Ther TSItouch Screen Cleaning Kit can be used on all glossy and anti-glare monitors including LCD, LED, OLED, and plasma monitors. Additionally, our screen cleaning kit is perfect for any touch screen solution cleaning needs.

Both before and after touching a Prysm display, apply hand sanitizer according to package directions and allow to completely dry prior to touching screen

NEVER clean a Prysm display screen with hand sanitizer, nail polish remover, window cleaner, vodka or any cleaning solution containing alcohol (except as noted below), ammonia, solvents or acetone. These can damage the screen and void the warranty. Screen cleaning should be done only when there is dust or smudging on the screen.

Lightly dampen a clean microfiber lint-free cloth with approved cleaning fluid as noted above. The cloth should not leave behind anything more than a thin film that evaporates quickly (i.e. the cloth should not drip or leave drips or runs on the screen).

Note: Avoid the accumulation of fluid on the screen due to the danger of liquid wicking into the laminated structure at the corners as this can cause permanent unrepairable damage.

This technical bulletin describes the recommended cleaning and disinfecting procedure for Touchscreen products relative to Coronavirus Disease 2019 (COVID-19). Included are recommended disinfectant products that are safe for use with Touchscreen products and approved by the US Center for Disease Control and Prevention (CDC).

Now, more than ever, it’s crucial to ensure that you’re disinfecting and cleaning surfaces to protect yourself, your coworkers, and your loved ones. However, it’s important to understand and know the best way to disinfect or clean in a way that’s safe and won’t harm the hardware. Please read the following before cleaning and/or disinfecting a Mimo Monitors display or tablet:

Cleaning your Elo ProductTo prepare for cleaning the touchscreen, power down the device (if possible), or ensure your on-screen software can tolerate false touches while you clean.

Disinfecting your Elo ProductTo prepare for disinfecting the touchscreen, power down the device (if possible) or ensure your on-screen software can tolerate false touches while you clean.

Contact Information: For technical support or help with this procedure, please call 844-435-6832 or email elotech@elotouch.com. If not in the North American region, may also contact the technical support group for your area here: Contact Technical Support.

Keep your POS systems, monitors, touch screens, tablets and other devices clean and free of fingerprints and debris with our Monitor, Tablet & Touch Screen Cleaning Wipes. They are designed to safely remove dirt, oil, germs and smudges from your electronics without leaving any residue or scratches. Choose from different sizes, quantities and cleaning agents that cleanse and disinfect effectively without damaging sensitive display technology. Order today from POS Supply - and get fast & Free Shipping on orders of $49 and over!

70% IPA is the most compatible formulation for sensitive touch screen equipment in healthcare. It is the most referenced formula in equipment manufacturer’s instructions for use. PDI has performed extensive compatibility work on touch screen materials and equipment to confirm compatibility. Easy Screen wipes are compatible with polycarbonate, glass, aluminum silicate, acrylic, stainless steel and more!

[Cleaning the screen of your mobile device with a wipe containing alcohol may reduce the lifespan of any anti-fingerprint coating. Please check your device manufacturer’s cleaning instructions.]

It is recommended that all high-touch surfaces be routinely cleaned and disinfected between uses, or anytime they become visibly soiled. The use of PDI’s Sani-Cloth® brand disinfecting wipes are generally safe on computer keyboards and mice, however they are not intended for use on touchscreen monitors. PDI’s Easy Screen® Cleaning Wipe was specifically developed for use on touchscreen equipment, and PDI performed extensive testing on touchscreen materials to confirm compatibility. Its 70% IPA formula is the most referenced formula in equipment manufacturer’s instructions for use. Easy Screen wipes are also compatible with polycarbonate, glass, aluminum silicate, acrylic, stainless steel and more!

[Cleaning the screen of your mobile device with a wipe containing alcohol may reduce the lifespan of any anti-fingerprint coating. Please check your device manufacturer’s cleaning instructions.]

Sani-Cloth, Sani-Prime and Easy Screen products DO NOT carry California Proposition 65 Warning. Proposition 65, officially known as the Safe Drinking Water and Toxic Enforcement Act of 1986, requires the state to maintain and update a list of chemicals known to the state to cause cancer or reproductive toxicity.

Since COVID-19 hit, we’ve been getting more requests about how to disinfect touchscreen surfaces. It is important to realize touchscreens are sensitive to chemicals and having liquid applied to them.

Touchscreen display modules are not sealed and can be damaged if liquids are sprayed or poured directly onto the surface. Cleaning cloths should be wrung of excess liquid prior to using on device surfaces.

Avoid Isopropyl alcohol at concentrations greater than 70% and non-diluted bleach or ammonia solutions. The use of incorrect solutions can result in visual impairment of touchscreen, discoloration, and damage functionality.

If further cleaning is needed, use a commercially available product such as Klear Screen or Glass Plus to dampen a clean, dry, non-abrasive cloth or use pre-moistened wipes designed for cleaning electronics. Avoid contact with the edges of the film or glass, and with the flex tail.

AntiMicrobial Films — Tip: Olea Kiosks and others offers anti-microbial films that can be adhered to the LCD screens and is even field retrofittable. The best part is the material can also be wiped down with very aggressive cleaning materials daily for years on end and will not fade or show wear. If you need cleaning materials Olea Kiosks can provide and recommend effective cleaner wipes by the leaders in medical cleaning technology.

A year or so ago an article on “dirty” McDonalds touchscreens came out in London tabloid and while proved inaccurate there are those that have used it to create a certain fear factor. The intent of the article was essentially “clickbait” for sensational traffic.

A new study conducted by PhoneSoap, a company that sells UV sanitizing devices for your phones, has found that the surface of the average device is 18 times dirtier than a public restroom. In an interview with Mashable, co-founder Dan Barnes says PhoneSoap calls phones “the third hand you never wash.”

Antimicrobial and antibacterial solutions for touchscreens and kiosks have been around a long time and there has been improvements over the years.  Important in the self-service terminal that the treatment does not affect the touchscreen

• Compatible with touchscreen healthcare equipment, including Corning® Gorilla® Glass (3 and 4)1, Sapphire glass, Aluminum silicate, Acrylic Glass, Etched glass, Stainless steel, and more!  MSDS Sheet.

Make sure that you have the correct touchscreen before following the below steps. It is important to follow the correct procedures for sanitizing your touchscreen in order to maximize their lifespan without damage. In case you are not sure which type of touchscreen you have, check your product manual or get in touch with specialists.

Resistive technology has one of the best reputations for durability. Resistive touch panels go through a series of processes when they are being built, including a hot hydrochloric acid bath, followed by a hot lye bath. These screens are able to withstand opposite ends of the pH balance, which makes them resilient.

Never apply cleaner directly to the touch panel surface; if the cleaner is spilled onto the touch panel, soak it up immediately with an absorbent cloth.

The cleaner must be neither acidic nor alkaline (neutral pH). Never use organic chemicals such as paint thinner, acetone, toluene, xylene, propy, isopropyl alcohol or kerosene. Use of incorrect cleaners can result in optical impairment of touch panel and/or damage to functionality.

PCAP technology is even more durable, thanks to being built with a glass cover. Cover glass has countless advantages including an incredible lifespan. Speaking from a chemical standpoint, glass is virtually indestructible; PCAP screens can withstand both industrial chemicals and household products such as acetone, hexane, laundry detergent, etc.

Using a soft microfiber cloth dampened with a 50% isopropyl alcohol mixed in 50% water solution, or a disinfectant product such as a small amount of hand sanitizer gently wipe the touchscreen clean. Ammonia based glass cleaners (typically 5-10% ammonia), 1: 100 bleach: water solution, or 75% alcohol can also be used to clean the surface of PCAP touch screens.

SAW touchscreens is also simple to sanitize, as it has solid glass on top. For touchscreens on SAW technology you must follow the same disinfecting steps as for PCAP touch screens.

Using a soft microfiber cloth dampened with a 50% isopropyl alcohol mixed in 50% water solution, or a disinfectant product such as a small amount of hand sanitizer gently wipe the touchscreen clean. Ammonia based glass cleaners (typically 5-10% ammonia), 1: 100 bleach: water solution, or 75% alcohol can also be used to clean the surface of PCAP touch screens.

IR touchscreen might have a glass screen plus a bezel that needs to be watched out for during cleaning and disinfecting. Learn more detail on IR technology here.

Using a soft microfiber cloth dampened with 70% isopropyl alcohol gently wipe the touchscreen clean. You can also use a small amount of hand sanitizer.

Be careful not to saturate the infrared bezel around the outside frame of the monitor. If solution gets in, it can damage the touchscreen functionality.

Using a dry portion of the microfiber cloth, gently wipe the touch screen and edges off to remove any lingering cleaning solution. Give the screen a minute or two to air dry, and then wipe it off with the dry portion of the cloth once more.

Once the screen is completely dry, plug it back in and turn it on. Let the device stand for half an hour to let the alcohol residue to evaporate, before using the device again.

Wash the microfiber cloth. To wash the microfiber cloth, soak it in warm, soapy water. The warm water serves to open the fibers and release the grime that may have gathered. Make sure you wash it without a fabric softener, as that can transfer a film to the touch screen, and contradict what you are trying to accomplish. Scrub the cloth lightly while soaking it (not too hard or you will damage the cloth). After soaking, avoid squeezing out any excess water, let the cloth out to air dry or just blow dry it.

While governments and health care system across the globe are trying to stop the spreading of COVID-19 and control pandemic outbreaks, it is important to ensure touchscreens are cleaned and disinfected regularly.

Most touchscreens are highly sensitive to chemicals applied to them. Which is why, it is important to follow the correct procedures for cleaning and disinfecting the touchscreen in order to avoid damage.

Resistive touch panels go through a series of processes when they are being built, including a hot hydrochloric acid bath, followed by a hot lye bath. Resistive technology screens are able to withstand opposite ends of the pH balance, which makes them resilient.

PCAP technology is even more durable, thanks to being built with a glass cover. Speaking from a chemical standpoint, glass is virtually indestructible; PCAP screens can withstand both industrial chemicals and household products such as acetone, hexane, laundry detergent, etc.

Using a soft microfiber cloth dampened with a 50% isopropyl alcohol mixed in 50% water solution, or a disinfectant product such as a small amount of hand sanitizer gently wipe the touchscreen clean. Ammonia based glass cleaners (typically 5-10% ammonia), 1: 100 bleach: water solution, or 75% alcohol can also be used to clean the surface of PCAP touch screens.

SAW touchscreens is also simple to sanitize, as it has solid glass on top. For touchscreens on SAW technology you must follow the same disinfecting steps as for PCAP touch screens.

Using a soft microfiber cloth dampened with a 50% isopropyl alcohol mixed in 50% water solution, or a disinfectant product such as a small amount of hand sanitizer gently wipe the touchscreen clean. Ammonia based glass cleaners (typically 5-10% ammonia), 1: 100 bleach: water solution, or 75% alcohol can also be used to clean the surface of PCAP touch screens.

IR touchscreen might have a glass screen plus a bezel that needs to be watched out for during cleaning and disinfecting. Learn more detail on IR technology here.

Using a soft microfiber cloth dampened with 70% isopropyl alcohol gently wipe the touchscreen clean. You can also use a small amount of hand sanitizer.

Once the screen is completely dry, plug it back in and turn it on. Let the device stand for half an hour to let the alcohol residue to evaporate, before using the device again.

Do not apply water or a cleaning solution on the touch screen directly. Any cleaning solution should first be applied to a lint free cloth. Touch screens are manufactured from fine materials and glass – layer by layer. If you directly spray the cleaner onto it, the liquid can penetrate into the corners and then between the thin layers, causing large black spots on the touch screen.

Do not use paper towels, Kleenex, toilet paper, old cotton rags or multipurpose cleaning cloth because these are both highly abrasive, and neither will be particularly good at lifting dirt from the screen’s surface. In addition, you run the risk of scratching or leaving behind lint particles.

Chemicals found in household cleaners like ammonia-based glass cleaners and even soap or rubbing alcohol shouldn’t be used on most touch screen devices.

Most touchscreen technologies such as PCAP, IR and RE can respond to the touch of a gloved hand or stylus. This means that users can safely interact with touchscreens while minimizing the chance of catching a virus or infection or spreading it themselves.

Special coatings for touchscreens that can slow the spread of bacteria or even kill bacteria are increasingly available, some patents are also effective against the human coronavirus.