yl80c lcd display supplier

I don"t have the color display, but I just looked at the manual for the color display and it looks similar to mine. Page 13 shows how to set the tire diameter. Page 14 tells you how to get at the advanced (personalization) settings. I wouldn"t be too worried about changing them in spite of the warning on that page. I have tweaked a few of the personalization settings and it has greatly improved my ride.

As to climbing hills, I think we all may be out of luck. Mine is the same way. The AM100 sucks at hill climbing, too. And what is sad is that it is not the motor"s fault. My wife has a 350 watt motor on her bike (different brand) and it climbs hills fine. The problem is that in PAS mode, the controller does not allow the battery to give it full power. If you use the throttle only, it will give full power, but as soon as you start pedaling, the power from the battery drops back to about 25%. You can see that if you watch your display when "cycle power" is displayed. Press the "i" button 4 times to get there.

I own a XC100 and recently the display went dark after 3000 miles. First off, I had to troubleshoot the problem with the help of Eahora tech support. They were very responsive to my emails and provided illustrated troubleshooting tips. I bought the 986 color display and am very happy with the purchase. I am now up and running and the display is nice and bright and well worth the extra $.

The full LCD dashboard displays E-Bike performance information to the rider through an LCD screen. Backlight display provides speed, mileage, power, battery level, etc

Fig. 8-1 Selection Interface of Custom Setting Options The steps for custom setting are as follows: in the power-on state, when the display shows the speed of 0, (1) Press and hold the buttons at the same time for more than 2 seconds to enter the selection interface of general setting options;...