yl80c lcd display manufacturer

This intelligent LCD display provides you with all the information you need when you riding. It includes battery capacity, current speed, pedal assist level, and travel distance.

I don"t have the color display, but I just looked at the manual for the color display and it looks similar to mine. Page 13 shows how to set the tire diameter. Page 14 tells you how to get at the advanced (personalization) settings. I wouldn"t be too worried about changing them in spite of the warning on that page. I have tweaked a few of the personalization settings and it has greatly improved my ride.

As to climbing hills, I think we all may be out of luck. Mine is the same way. The AM100 sucks at hill climbing, too. And what is sad is that it is not the motor"s fault. My wife has a 350 watt motor on her bike (different brand) and it climbs hills fine. The problem is that in PAS mode, the controller does not allow the battery to give it full power. If you use the throttle only, it will give full power, but as soon as you start pedaling, the power from the battery drops back to about 25%. You can see that if you watch your display when "cycle power" is displayed. Press the "i" button 4 times to get there.

Premium Material:This display adopts ABS engineering plastic good quality materials, lightweight, rainproof, sturdy and durable, and can be used on the bicycles without burden.

LCD Display:The full LCD dashboard displays E-Bike performance information to the rider through an LCD screen. LCD display can clearly show the state and data, backlight enables you to see scree clearly in dim environment, buttons for quick operation, easy to use.

3 Levels Modes:3 levels assist modes, backlight display provides speed, mileage, power, battery level, etc. The LCD screen ensures easy reading of your statistics.

Wide Application:This electric bicycle LCD display is easy to install and use, comes with mount for LCD display and it is suitable for 22.5mm handlebar.

Battery Operated: This battery powered bike monitor has a LCD display screen with time and energy saving mode. This is aLCD screen with battery operated display and backlighting function.

Hnd stands for throttle, HL for turn-assisted pushing, HL-N for throttle-assisted pushing, HL-Y for throttle-assisted pushing, that is, when turning the throttle, the display enters the boost-driven mode; by UP / DOWN You can switch Y / N, press the ‘i’ key to confirm, if you select N, you will enter the throttle position enable setting interface;...