g51 lcd display manual made in china

LCD-SW900 INSTRUCTIONS 1. Shell s Size and Material The shell s material is ABS. LCD screen is made of imported high hardness acrylic, and the hardness is equal to the tempered glass. Front View Side View

Product Specification 07/2014 Product Middle install intelligent LCD Display Mode Abbreviation C965A Client Customer audit Supplier Tianjin APT Development Co., Ltd. Room 609, Hi-tech Building H, No.6

Manual C963 Contents Preface 3 Appearance & size 4 Material & color 4 Function & button 5 Function 5 Display 5 Button 6 Attentions 6 Installation 7 Operation 7 ON/OFF 7 Interface 7 Assist walking 8 Backlight

EVBIKE LCD Display Control User Guide WWW.EVBIKE.CZ - 1 - Table of Contents: 1) Description of the individual components and installation 2) Description of the measured quantities and user control display

Fleets Vehicle GPS Tracker TS20 User Manual (Version 1.0) Index Contents 1. Package Contents... 3 2. Features and Specifications... 3 3. Mechanical Size... 4 4. Knowledge before Usage... 4 4.1 Factory

12 Volt 30 Amp Digital Solar Charge Controller User s Manual WARNING Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

Solar Controller / Battery Charger User s Manual 1 Congratulations! You have made an excellent choice by purchasing this high quality KORR PWM solar controller which has been manufactured to the highest

INSTRUCTION MANUAL ---------- Remote Meter: MT-5 Remote meter (Model MT-5) is available to connect with solar controller Tracer MPPT series. OVERVIEW The digital Remote Meter displays system operating

Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following

Multi Split Units If there is a fault on any LG Multi unit, an Error mark is indicated on the display window of the indoor unit, wired-remote controller, and LED s of outdoor unit control board. A two

Fleets Vehicle GPS Tracker TR-11E User Manual (Version 1.0) Index Contents 1. Introduction:... 3 1.1 Features... 3 1.2 Specification... 3 1.3 Mechanical Size:... 3 2. Knowledge before Usage:... 4 2.1Factory

Thank you for purchasing our product. Please read this User s Manual before using the product. Change without Notice AWT07MLED 7 Q TFT LCD MONITOR (LED Backlighted) USER MANUAL e-4 SAFETY PRECAUTIONS Federal

Trek Sensor 2.0 Cycling Computer Owners Manual Congratulations and thank you for purchasing your Trek Cycling Computer. Before operation please read this instruction manual carefully and retain it for

USER MANUAL EZRUN Series Brushless Speed Controller EZRUN-150A-PRO User Manual of EZRUN-150A-PRO Brushless ESC HW-SM405ENG-20130809 Page - 1 - Declaration Thanks for purchasing our Electronic Speed Controller

K3 K4 www.sebury.com.cn Digital Keypad Use s Manual Contents Introduction Introduction Specifications Intramural Interface Circuit 3 Mounting 3 Wiring 5 Power UP 7 Engineer Programming Mode 7 The K3/K4

ECO-WORTHY INSTALLATION AND OPERATION MANUAL INSTALLATION AND OPERATION MANUAL www.eco-worthy.com ECO-WORTHY Solar tracker ECO-WORTHY 400 Solar Tracker Owner s Manual Manual User Installation instructions

INSTALLATION MANUAL XM3 Reader Conditions Transactions, deliveries et cetera will be according to the general terms of delivery as deposited at the Chamber of Commerce at Meppel, The Netherlands. Registration

Manual EN BlueSolar Pro Remote Panel For BlueSolar PWM-Pro charge controllers 12/24V 5, 10, 20, 30A Article number SCC900300000 Contents EN 1.Important safety instructions... 2 2. Installation... 2 3.Product

e-ask electronic Access Security Keyless-entry e-fob Keyless-entry entry System Full-Function Function Installation Manual FCC ID: TV2EFOB1 (UM20 ~ 22793-02) Table of Contents Introduction... 1 e-fob Operation

3RP / 5RP 4-BUTTON SERIES VEHICLE SECURITY SYSTEMS INSTALLATION MANUAL Before you begin the installation Read the INSTRUCTIONS! Always use a multi-meter when verifying vehicle wiring. Before mounting the

Operating Instructions Display, graphic Numeric language Contents Numeric language, general... 1 Numeric language, general... 1 Display control stalk... 1 Text strings... 1 Stop message... 2 Change language...

Introduction to Electronic Signals Oscilloscope An oscilloscope displays voltage changes over time. Use an oscilloscope to view analog and digital signals when required during circuit diagnosis. Fig. 6-01

TFT LCD COLOR MONITOR OPERATION MANUAL Mode 1 Mode 2 Mode 3 DEAR CUSTOMERS Thanks you for purchasing 8 TFT COLOR MONITOR,We hope that you will have the enjoyment of your new mini color TFT LCD. SAFEGUARDS

LED Bulb Manual Aeotec by Aeon Labs LED Bulb. Aeotec LED Bulb is a multi-coloured LED bulb which allows control (on/off/dim/colour change) via wireless Z-Wave commands. The LED Bulb can also communicate

User Manual GSM Alarm System All rights reserved by Delta Security Co., Ltd Dear Clients, Thank you for using our GSM Alarm System. We are committed to giving you the best home security available today

MODEL PRO-9744 INSTALLATION MANUAL Multi Function, User Configurable Remote Vehicle Security System with 4 Button Replaceable Membrane Remote Transmitter This System Allows The Transmitter Buttons To Be

Brinno MAC200 User Manual Last Modified on 12/23/2015 7:51 pm EST Motion Activated Camera User Manual www.brinno.com Register@online http://www.brinno.com/support/register.html contact us: customerservice@brinno.com

GB PKN10 serial node with colour LCD display User s manual Bač 49a, 6253 Knežak, SLOVENIA tel: ++ 386 5 753 2006 fax: ++ 386 5 753 2007 email: sec.electronics@siol.net http://www.secelectro.com SEC Electronics

Product Instruction Manual Accona AN500T, AN1000, AN1000T, AN1500, AN1500T AN2000, AN2000T Panel heater v16.5/5 Version 3.2 Jan 2015 Contents 1. Important safety points 2. Installation 2.1. Wall mounting

SMS Alarm User Manual 1 1. Introduction... 2 2. SMSA1000 Specifications... 3 3. Parts Identifications... 4 4. Packing Contents... 5 5. Battery and SIM Card Installation... 6 5.1 Open the Back Cover...

AA Portable Power Corp www.batteryspace.com, Email: Sales@batteryspace.com User Manual for CH-PFC76810 1. Overview The CH-PFC76810 charger is suitable for charging lithium ion battery packs such as those

Intelligent Solar Charge Controller Solar30 User s Manual Please read this instruction carefully before using it. SOLAR30 12V/24V AUTO WORK 1 Product introduction This controller is a kind of intelligent

Mobile Satellite Solutions A WiWorld Partner SATELLITE TV ANTENNA CONTROLLER RFM-1000/1100 TECHNICAL MANUAL SEARCH STOW Ver. 1 June 2012 WARNING Make all electrical and coax connections from the controller

Electronic Brake Controller Hayes Brake Controller Company ENERGIZE III P/N # 81741B or ENERGIZE XPC P/N #81745 OPERATION MANUAL ENERGIZE III is for trailers with 2 or 4 electric brakes and vehicles with

Bluetooth + USB 16 Servo Controller [RKI-1005 & RKI-1205] Users Manual Robokits India info@robokits.co.in http://www.robokitsworld.com Page 1 Bluetooth + USB 16 Servo Controller is used to control up to

SA-2000-II HARDWARE MANUAL Access Technologies International, Inc. 1 Table of Contents 1. Introduction 3 2. Features 3 3. Specification 4 4. Identifying Supplied Parts 4 5. Panel Description 5 6. Connection

NavEye BlackBox GSM/GPS alarm manual NavEye BlackBox protects your belongings and vehicles in various ways. Equipped with external sensors the alarm can detect when a door or a hatch is opened and if the

User Manual EN FR DE for Terratrip GeoTrip IT ES PT Version V1.1, 06/02/13 User Manuals available at www.terratrip.com/manuals.htm Index. Page : Features... 3 1.0 Probe Selection:... 3 1.1 GPS receiver:...

Driving Position Memory (see Seats ) Power Mirrors (see Mirrors ) Indicators/Gauges (see Instrument Panel ) Multi-information Display (see MID ) HomeLink (see HomeLink ) Navigation System (see Navigation

12 Volt 30 Amp Digital Solar Charge Controller Installation & Operation Manual This 30Amp charge controller is designed to protect your 12Volt Lead-acid or Gel-cell battery from being overcharge by solar

MODEL NUMBER: ISC910-1-0-GB-XX ISC911-5-0-GB-XX IXP20 CONTROLLER SPECIFICATIONS Working Environment Plastic Housing... Power ImproX IXP20 Controller INSTALLATION MANUAL Designed to work in an indoor (dry)

Fingerprint Time Attendance Hardware User Manual CONTENTS 1. Start Screen 1 2. User Management 1 2.1User Registration 1 2.2DeleteRegistration 2 3. Equipment Setting 2 3.1Basic Setting 2 3.2Advanced Setting

Sebury Technology Co., Ltd. Address: 5/F, Building 8, Xinwu Industrial Park, Xili, Nanshan District, Shenzhen, China. Tel: +86-755-88856 Fax: +86-755-888565 P.C.: 58055 www.sebury.com.cn User Manual Before

OCSM Series High Resolution Digital Crane Scale Content 1. Safety Guide... 1 2. Features... 1 3. Specifications... 2 4. Capacity... 3 5. Display & Keys... 3 Scale & Remote Keys... 3 Indicators... 4 Message...

INSTALLATION MANUAL Wheel Drive Electric Bicycle Kit EVBIKE-SET-36V-26F EVBIKE-SET-36V-26R EVBIKE-SET-36V-28F Thank you for purchasing EVBIKE product and we hope that you will become a happy user. Carefully

DSM155 Digital LED Light Meter User s Manual DSM155 CONTENTS TABLE OF CONTENTS......3 LIMITED WARRANTY AND LIMITATION OF LIABILITY......3 Out of Box....3 Accessories....3 Safety Information....3 Certification....5

GPS Vehicle Tracker User Manual V5.5 AL900 Page 1 of 19 Table of Contents 1. Working Directions.....3 2. Specification 3 3. GPS Tracker Installation...4 3.1. Product Parts List...4 3.2. Precaution before

1.Heartbeat price: Collaborative pricing strategy of motor, controller,throttle&brake lever&switch,LCD&LED display,PAS,front light,cutting extra cost and helping with get more profit margins for customers

Gday, My new cheap Chinese T Power 350w ebike hauled me around for 48km and then after its 1st charge (2nd actually, after the initial 1) decided it didn"t want to play anymore. E 10 is displayed which possibly could be a communications problem, but it"s so difficult to work out with the myriad of manuals and super similar yet different controllers out there. I"ve checked for obvious wire breaks etc and all connectors. I did find a bizarre scorch mark on a fairly solid battery joiner _ super close ie about 1mm from a small exposed section of the soldered (red) wire but couldn"t find anything it might have shorted across. And battery is @51v Anyone able to assist????

P2:This means the control for your Speed sensor if you doubt that you have an issue with the speed sensor so better to check the default value in your manual.

C5: This parameter is responsible for the maximum operating current & as we mentioned you can use this to reset your controller. please make sure to check your e-bike manual before changing any value.

Pedego electric bikes are equipped with an LCD console that monitors your pedal assist level, speed, odometer, trip distance, riding time, and battery energy level. If you have purchased your electric bicycle from a Pedego dealer or via the official Pedego website, your ebike will arrive with all the correct LCD console settings, such as km/hr settings and a maximum motor speed of 32 km/hr. In this article, we list the different numbers and symbols, what they mean, and how to change certain settings on your electric bike.

It’s easy to turn the LCD console on. First, make sure the battery is fully inserted and the on/off switch is in the on or [I] position. Then press the power button (top button) on the four button selector located near the left grip on the handlebars. To turn off the LCD screen completely, press and hold the power button for three seconds. The console will also automatically turn off after five minutes of bike inactivity.

To turn on the screen’s backlight as well as the integrated front and rear lights on your Pedego, once the LCD screen is on, simply press the power button and the lights will come on. Press it once again to turn them off. (Pressing the power button for longer than three seconds will turn the entire LCD unit off.)

There are other functions your LCD console can perform. By pressing and holding the “SET” button for a couple of seconds, located just below the power button, you’ll enter the programming menus. Here are the explanations for each screen and how they function.

After you’ve powered on the LCD screen, hold the “SET” button for two seconds. The screen will become backlit and you can release the button. You’ll see the number 1 in the bottom left corner. You’ll also see the trip odometer figure and here is where you can reset it back to zero by simply pressing the minus [-] button. This is useful to determine how long a particular ride is or how much battery power is used over a particular distance. To reset the trip odometer to zero, hold “SET” again for two seconds to exit the setup interface.

This should have been set when you purchased the bike. After powering on the LCD screen, hold the “SET” button for two seconds. The screen will become backlit (release the button at this point) and you’ll see the number 1 in the bottom left corner. Press the set button twice, and you’ll see a number 3 in the bottom left corner. If your electric bike has 28-inch tires, the number on this screen will read 28. You can toggle between all the sizes by pressing the minus [-] button. Hold “SET” again for two seconds to exit the setup interface.

Again, if your electric bike was purchased in Canada, the LCD console will already be set to kilometres per hour. To change between MPH and KPH, power on the LCD screen and hold the “SET” button for two seconds. The screen will become backlit (release the button at this point) and you’ll see the number 1 in the bottom left corner. Press the set button three times and you’ll see a number 4 in the bottom left corner. To toggle between MPH and KPH, press the plus [+] or minus [-] button. You can also use this function to determine whether you’re eligible to receive Mile Marker pins. (Check about this with your local Pedego store!) Hold “SET” again for two seconds to exit the setup interface.

To engage the pedal assist limiter, or to turn it off, power on the LCD screen and hold the “SET” button for two seconds. The screen will become backlit (release the button at this point). Press the set button four times, and you’ll see a number 5 in the bottom left corner. When the pedal assist limiter is set to “OFF,” you’ll have a reduced top speed through all pedal assist modes. Toggle between “OFF” and “ON” by pressing the plus [+] or minus [-] buttons. Hold “SET” again for two seconds to exit the setup interface.

To engage the throttle limiter, or to turn it off, power on the LCD screen and hold the “SET” button for two seconds. The screen will become backlit (release the button at this point). Press the set button five times, and you’ll see a number 6 in the bottom left corner. When the throttle limiter is set to “OFF,” you’ll have a regulated throttle output to about walking speed. Toggle between “OFF” and “ON” by pressing the plus [+] or minus [-] buttons. Hold “SET” again for two seconds to exit the setup interface.

The LCD console also has a USB port embedded in the underside of the LCD console that allows you to charge your mobile devices. To activate the USB charger, press the plus [+] button and the SET button at the same time for 2 seconds. This will turn on the USB charging capability. Hold the same buttons again for 2 seconds to turn this feature off.