innolux lcd panel firmware update factory

This package contains the LCD Panel Firmware Update Utility. The LCD firmware accepts data and commands from either a serial or a parallel interface and enables the display to generate text or an image.

Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.

Hatteland Technology AS hereby informs about changes for the following Monitors (MMD / STD) and Panel Computer (MMC) - Series X Generation 1 and 2 based model(s):...

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series X MVD. The new IACS E10 rev 8 requirements involve compliance to higher frequencies, hence this update....

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series E. The new IACS E10 rev 8 requirements involve compliance to higher frequencies, hence this update. The...

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series X STD & MMC G1. The new IACS E10 rev 8 requirements involve compliance to higher frequencies, hence this...

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series X MMD & MMC G2. The new IACS E10 rev 8 requirements involve compliance to higher frequencies, hence this...

To ensure continuous compliance to IACS E10 and product safety, we have decided to implement a product design update for all products in Series 1. The new IACS E10 rev 8 requirements involves compliance to higher frequencies, hence this update. The...

As single source manufacturer, Innolux has decided to end the production of 26" LCD panel used in the Series X HD 26 product families. Originally, the information was that the LCD would go through some HW updates, but since the world wide electronic...

New firmware (FW) version is under implementation in our production. All Series X G2 MMD display products manufactured on January 1st 2021 or later will be delivered with this new FW implemented. Available for download for units in field, from the...

Series X G2 - Maritime Multi Computer (MMC), Firmware Update New firmware (FW) version is under implementation in our production. Sizes 19" - 27" X G2 MMC Panel Computer products manufactured on December 1st 2020 or later will be delivered with this...

This is an update to ECN issued July 10, 2020 - ECN 11_2020 and EOL issued July 10,2020 - ECN_12_2020.Summary of the Update in this ECN: Type number structure for the new Series 1 Maritime Multi Displays Generation 2 has changed. The typenumber...

Hatteland Technology AS hereby informs about changes for the following Panel Computers, Computers and Peripherals which includes one or more NMEA COM module (PCA100293-1):...

Series 1 Maritime Multi Displays Due to key component obsolescence, the following model(s) will be updated to new variants. All type numbers and variations will be replaced by new part numbers. All products will maintain Form-Fit to current models....

As single source manufacturer, Sharp has decided to end the production of 23.1inch LCD used in the Series 1 JH 23 product family. The LCD and 23.1inch type approved industrial monitor was brought to the marine market by Hatteland as the WORLDS FIRST...

New firmware (FW) version is under implementation in our production. All Series X G2 MMD display products manufactured on January 6th 2020 or later will be delivered with this new FW implemented. Available for download for units in field, from the...

Hatteland Technology AS hereby informs about changes for Panel Computers (MMC) - Series X Generation 2, Series E and Compact Fanless Computers - HT B30 regarding updated Microsoft® Windows® 10 IoT Operating Systems (OS): Current versions: Win10 IoT...

The HDD SATA 2.5" 320GB Ruggedized/Automotive storage device have reached its End Of Life phase. EOL affects the factory option available for the following Computers and Panel Computers and also applies to Customized Models. HT 221Hx STC-xxx-Mxxx HT...

Hatteland Display hereby informs about changes for the following Series X (Generation 1 and 2) Display and Panel Computer models that uses the 24 inch LCD panel component:...

Hatteland Display hereby informs about changes for Console Mount Kit (CMB) for 24,26 and 27 inch Displays and Panel Computers. Since units started shipping last year the current HD CMB SX1-B1 and HD CMB SX1-C1 (for Generation 1 models) was included...

Hatteland Display hereby informs about changes for the following model(s): CHANGE(S) APPLIES FOR THE FOLLOWING HATTELAND DISPLAY® PRODUCT(S): HD xxT21 MMC (12,15,17,19,24 and 26 inch Panel Computers Series X (MMC)) HT B22 HT C02 HT 221 EFFECTIVE...

When dimming backlight on the Hatteland Display"s Series X units to zero the GDC (Glass Display Control) buttons may become difficult to see in daylight. In general, the brightness of these buttons follow the brightness of the panel, however we are...

This is an update to Engineering Change Notification, 16 March 2015. http://www.hatteland-display.com/mails/04_2015_ecn.html. We will implement the new version of 15 inch panel from 01 February 2016 (instead of 01 Sept 2015, reference previous ECN)....

This is an update to Engineering Change Notification, 16 March 2015. http://www.hatteland-display.com/mails/05_2015_ecn.html. We will implement the new version of 19 inch panel from 01 November 2015 (instead of 01 Sept 2015, reference previous ECN)....

New firmware (FW) version is under implementation in our production. All Series X STD display products manufactured on July 01, 2015 or later will be delivered with this new FW implemented....

Hatteland Display hereby informs about changes for the following High Bright Maritime Multi Display (MMD) and High Bright Panel Computer (MMC) model(s):...

Hatteland Display hereby informs about changes related to ECN #7 (16 Mar 2015) "Series X - Maritime Multi Display (MMD), Firmware Update" EFFECTIVE FROM: 24 April 2015 CHANGE(S): - Fixed bug in RS-422/485 communication, incorrect ACK in...

New firmware (FW) version is under implementation in our production. All Series X MMD display products manufactured on March 16 or later will be delivered with this new FW implemented....

Our LCD panel supplier has re-introduced the 20.1 inch LCD, with LED Backlight Technology. As a part of our long term Form-Fit-Function strategy, we will introduce and upgrade our 20.1 inch Series 1 display with LED Backlight Technology....

The JH 15T17 xxC (15 inch) and JH 19T14 xxC (19 inch) of Series 1 type approved panel computers is transitioning to our most popular products in the Series X range. The following models are therefore the subject of this End of Life notification....

This ECN is an update to: ECN, dated Tuesday, February 26, 2013 and ECN, dated Thursday, December 20, 2012 Our LCD panel supplier has notified the End of Life for the 26 inch TFT panel with CCFL backlight technology. They have also announced that...

This is an update to Engineering Change Notification, 7 February 2014. We will implement the new version of 15 inch panel from 15th May 2014 (instead of 14th April 2014, reference previous ECN). For further enquiries regarding this Engineering...

This is an update to Engineering Change Notification, 12 February 2014. Due to increase of orders we will implement the new version of 12 inch panel from 1th April 2014 (instead of 3th June 2014, reference previous ECN). For further enquiries...

Current standard HDD, 2.5" SATA 250GB which is part of option (standard or customized) for a wide range of Panel Computers (Series 1 and Series X) and Computers is now End of Life (EOL). The successor and new replacement will be HDD, 2.5" SATA 1TB....

Our LCD panel supplier has notified the End of Life for the 26 inch TFT panel with CCFL backlight technology. They have also announced that there is an 26 inch LED based version under planning and development. As a result of this, we have initiated...

The 27 inch WUXGA LCD has been EOL since many years already. We purchased a high quantity of modules to support customers that already implemented this product in their systems. The same customers has been updated on available units over the year,...

Our LCD panel supplier has notified the End of Life for the 26 inch TFT panel with CCFL backlight technology. They have also announced that there is an 26 inch LED based version under planning and development. As a result of this, we have initiated...

Hatteland Display have identified a potential issue in the firmware handling electrical hardware interfaces (IO), affecting Solid State relay, Digital Input, Safety Signal Relay, Brightness Control, Light Sensor, Programmable Alarm LED, Buzzer and...

Our supplier has notified the End of Life for the 20.1 inch TFT panel with CCFL backlight technology. The 20.1 inch UXGA LCD is not available in the market anymore and as a result of this the JH 20T17 models have reached their End of Life....

The earthquake in Japan March 2011, caused a lack of supply on several components from Japan. We needed to do a change to our 15" product range, since the backlight modules in the LCD module was stopped as an immediate result of the earthquake. We...

This is an update to End Of Life, 4 January 2011 The Hatteland Display product range aimed at the yacht market (Series 2) will be phased out and replaced by a new range of display products. The Series X as it is currently known will be a full range...

The following ECN apply to all display, panel computer and computer products manufactured by Hatteland Display. Hatteland Display has since many years already, decided to use Torx screws when assembling our products. For a period, we have been using...

We have identified 3 failure symptoms that apply for the Series 2 Displays (MMD) and Panel Computers (MMC) products with factory mounted touch screen....

With reference to ECN #1 2007, this is final EOL notification of the JH 17T02 from Hatteland Display. Since the 17" SXGA LCD panel has become an unpopular size in the market, we have decided to develop the replacement monitor based on a 19" LCD....

PS: Determine the screen model that needs to be selected according to the suffix of the original version, as shown in the green box. (If you have replaced the LCD screen, please check the model identification on the screen cable before downloading the corresponding firmware update)

Step 1 - Under normal circumstances, you only need to update the files in the firmware file and copy the files to the root directory of the USB flash drive

Caution:The.LCD file will be automatically updated after restarting the machine in the shutdown state. Please do not update repeatedly to avoid being prompted "Same Firmware already exists!"

Second Nintendo Switch Lite Teardown Hints At Different Analogue Stick Design Nintendo Life Initial teardown suggested identical part design by Share: Update (23rd Sep): Interestingly, in this video uploaded by , you can see differences in the stick"s metal casing (which sits underneath the stick in normal circumstances)

It is also revealed that the screen is made by InnoLux, the same company which supplies the improved panel on the upgraded variant of the original Switch

Source please I guess we"ll see in the future if gradual updates might include a software component offsetting the physical wear behind drifts? (Perhaps through somehow better being able to detect the conditions causing drift and correcting them on the software side of things?) You have it all wrong, this article is pretty bad