photon s lcd screen replacement made in china

The biggest positive aspect for me are the decreased printing times. With a reduction of exposure times from 7.0s to 1.4s the total printing times were reduced by around 35%.

Sadly, the Chitu L V2 board is not fully compatible with the touchscreen of the Anycubic Photon S. After the upgrade, the touchscreen shows scan lines which while do not inhibit the touch functionality, are still quite annoying. I had to buy a new touchscreen (which is a newer revision – v3.10 – in relation to the original v1.0 that came with my printer) to solve that issue. The seller should have properly disclosed this fact and preferably already offer a kit with a replacement touchscreen (even if they need to charge more for it).

Antigua and Barbuda, Aruba, Australia, Austria, Bahamas, Bahrain, Bangladesh, Barbados, Belgium, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Bulgaria, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Cyprus, Czech Republic, Denmark, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, French Guiana, Germany, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Hungary, Iceland, Indonesia, Ireland, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kuwait, Latvia, Liechtenstein, Lithuania, Luxembourg, Macau, Malaysia, Maldives, Malta, Martinique, Mexico, Monaco, Montserrat, Netherlands, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Republic of Croatia, Reunion, Romania, Saint Kitts-Nevis, Saint Lucia, Saudi Arabia, Singapore, Slovakia, Slovenia, South Africa, South Korea, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Islands, United Arab Emirates, United Kingdom, United States, Vietnam

Η GRobotronics σέβεται και προστατεύει τον καταναλωτή απο τυχόν ελλατωματικά προϊόντα και απο αγορές στις οποίες δεν έμεινε ευχαριστημένος. Προσπαθούμε να παρουσιάσουμε τα προϊόντα μας όσο καλύτερα και αναλυτικότερα γίνεται μέσω εικόνων και περιγραφών. Επιστροφές γίνονται δεκτές μόνο όταν τηρούνται οι παρακάτω όροι και έπειτα αποσυνεννόηση με την εταιρεία μας.

Σε περιπτώσεις όπου αναλαμβάνει η εταιρεία μας την χρέωση μεταφορικών για την επιστροφή προϊόντων, θα γίνονται δεκτές μόνο όταν αυτές στέλνονται με κούριερ ACS.

Επιστρέφετε το προϊόν με έξοδα τα οποία αναλαμβάνει η εταιρείας μας. Το προϊόν ελέγχεται απο τον κατασκευαστή και πραγματοποιείται αντικατάσταση ή επισκευή. Το προϊόν στέλνεται πίσω με έξοδα τα οποία αναλαμβάνει εξίσου η εταιρεία μας (μόνο με κούριερ ACS).

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Hi everyone! Today, we will tell you about the best 3D printers manufactured by Chinese companies, which have greatly contributed to the development of additive manufacturing. In this article, we list both FDM and resin solutions, dividing them based on their price range. Here, you will find the best Chinese 3D printers better suited for beginners, enthusiasts, or seasoned professionals.

The Anycubic i3 Mega S is an affordable all-metal FDM 3D printer that provides high-quality prints while costing less than $250. Minimum shaking and vibrations allow for more accuracy and repeatability. The Ultrabase heated platform, print resumption after a power failure, and the mechanical filament sensor streamline your printing experience taking care of the most common problems. The sensitive, multilingual touch screen ensures easy navigation and operation. The Anycubic i3 Mega can be easily upgraded to meet your requirements. With the 0.4 mm nozzle, the device is able to produce accurate, smooth-surfaced models with a high level of detail. The print head uses rods with linear bearings; the machine also features double-Z limit switches, making it more powerful and accurate.

An upgraded version of the well-known budget Ender 5, the Pro version features open-frame aluminum construction granting high stability and precision while keeping the printer easily accessible. This affordable kit has a soft magnetic self-adhesive heated bed, a metal extruding module, and an independent motherboard ensuring quiet operation. The wear-resistant, firm structure includes high-standard V-slot profiles and pulleys along with a double Y-axis control system, which makes for stable, smooth operation and higher durability. The printer is ideal for rapid prototyping and home use, being employed to print a variety of models including figures, toys, buildings, prosthetics, and so on.

The Creality CR-10S Pro V2 kit sports such smart features as a BL-Touch probe providing automatic bed leveling, a filament runout sensor, dual-gear extrusion, improved filament feeding tube, and a resume printing function. Besides, the device has a powerful 480W Mean Well power supply and a motherboard with an extra-silent stepper driver ensuring quiet operation.

The machine is perfect for entry-level users and more experienced makers. It is used to produce various household items, original designs, prototypes, accessories, tabletop models, souvenirs, props, and more. The extruder of the CR-10S Pro V2 is equipped with an upgraded fan for printing with PLA-type materials.

Made of strong aluminum frame and quality components, the Qidi Tech X-Pro is a personal FDM 3D printer used by hobbyists and students. Shipped mostly assembled, it will be up-and-running within an hour. It provides above-average print quality and, thanks to its robust design, ensures high accuracy and reliability. The heated print bed grants good adhesion without needing external aids. The X-Pro features power-off resume, flashy interface and Wi-Fi connectivity. It is equipped with a front door that closes magnetically and lets you easily access the print chamber. It’s been used to print a wide variety of models, including home decorations, gadgets, miniatures, and upgraded components.

The Raise3D Pro2 model represents an upgraded version of the Raise3D N-Series. It has a fully enclosed chamber, aluminum frame, dual extruder, and the print recovery in case of a power outage. Although the printer resembles its predecessors, it has a number of structural differences and improvements. Thanks to the ability of the hotend to heat up to 300 °C, the machine supports a wide range of consumables including PLA, ABS, HIPS, TPU, FLEX, nylon, bronze, wood, carbon, and some others. The device features a HEPA filter which absorbs more than 91% of harmful substances. The well-designed kinematics and replaceable nozzles add to the excellent print quality and high accuracy. (It is advisable to use a 0.2 mm nozzle for better detail.) The extruder is equipped with filament runout sensors, ensuring more reliable printing. Switching between extruders takes less than one second. For the user to be able to monitor the print process remotely, there is a webcam embedded in the device. The 7" touch screen with color interface ensures convenient, comprehensive control.

The Qidi Tech X-Max is a large-sized, semi-professional device aimed at hobbyists, students, tinkerers, and professionals. It comes with such noteworthy features as easy bed leveling, silent operation, good air filtering, Wi-Fi connectivity, pause-and-print function, power-outage recovery, high build quality, and dual-Z axis. Although it is a single extrusion machine, the Tech X-Max benefits from two extruders that support different kinds of materials, standard or high-performance ones. Backed by a reliable support service and ongoing upgrades, it delivers accurate prints with great quality at a good price point. It is used to print a wide variety of objects, including ornaments, characters, cosplay accessories, and functional elements.

The Tiertime X5 is a continuous 3D printer targeted at small-scale manufacturing. It adopts a Melted Extrusion Modeling technology and was designed for printing multiple objects without interruption. To achieve this goal, it is engineered with a build plate auto-swapping mechanism and a clever print queue management function. It is a sturdy, reliable printer with a fully-enclosed design.

Thanks to the auto-swapping system, the device is capable of automatically ejecting a completed print from the build plate and reloading up to 8 trays, starting a new job immediately. Additionally, the printer has a pause-and-print function, an end-of-the-filament detection system, and an internal build plate vault that can house 12 print beds. These smart features make X5"s exceptional peculiarity possible. The device is also equipped with a heated bed, which is automatically calibrated after each print.

Being an improved version of the original Anycubic Photon, the Photon S model boasts upgraded software and hardware that make the operation more convenient and the prints more accurate. Other upgrades include an enhanced UV LED and a charcoal air filter. A new Z-axis dual linear rail enhances the stability of printing by reducing wobbles and improving print results. With the layer thickness of 25 microns, it is possible to make objects with smooth surfaces and complex geometries, and the pause-and-play function enables you to check the status of printing. The device is operated via a convenient touch screen with an intuitive menu.

The Anycubic Photon S is used in small-scale production and prototyping (jewels, art designs, miniatures). It is available at quite a competitive price.

This smaller version of the original Photon comes with a 480 x 854 pixels LCD screen and uses 405 nm matrix UV light technology. It is available at a very convenient price, making resin 3D printing accessible to anyone. Compact and cheap, it is the perfect fit for almost any desk.

The device comes fully assembled. Despite its low price tag, the Anycubic Photon Zero includes some thoughtful features and improvements. For example, it combines linear rail and lead screw for better Z-axis motion. This results in higher accuracy and quality printing results. The UV module has been upgraded, too. It relies on a parallel lights matrix that provides uniform distribution of the light for higher print quality. The resin tank includes level marks to easily check the resin level at a glance. Also, it benefits from a quick FEP replacement mechanism. Ideal for beginners, the printer can be used to produce a variety of tiny models with decent print quality.

The Creality LD-002R comes with an all-metal body with CNC-machined aluminum parts. Its robust fully-enclosed case helps reduce vibrations, providing higher quality outputs. The printer adopts a Z-axis ball screw and single linear rail, which ensures steady yet accurate movement. The quick manual leveling system lets you align the build plate to the LCD screen only by loosening 4 hex screws.

The printer comes with a resin vat with a redesigned structure which includes a special long-lasting FEP release film tightened from both sides of the tank. Thanks to its configuration, by removing the film you will be able to remove any residue from the tank. The device is equipped with an effective air filtering system composed of a dual-fan system and an active carbon air filtering. Thus, it is able to minimize odors and harmful emissions while printing. Ideal for home and educational uses, it can be employed to produce a broad range of resin models with ease.

The Wanhao GR 1 is a desktop-sized resin 3D printer and an advanced version of the Wanhao D7 Plus. Powerful yet affordable, the GR 1 comes with a larger active build volume and lets you create parts with a resolution of 54 microns.

The printer uses a direct UV MSLA LCD technology and is equipped with a 6.3" 2K LCD panel. The custom-made UV light array has 9% extra power than standard resin printers. It relies on Uniformtrix technology, which grants up to 89% optical uniformity without distortion. Unlike its predecessor, the GR 1 features an improved and more durable metal construction with enhanced linear guides, dual Z-axis rails, and an openable window. It also includes a radiator fan and a built-in power supply for safe use. The device comes fully assembled to start printing just out of the box.

This one is a professional 3D printer by the renowned Chinese company Wanhao. This Duplicator 7 Plus is capable of printing small 3D models, highly detailed and with complex shapes. It is one of the most affordable DLP printers currently available on the market. Compared to its predecessor, it comes with some noteworthy improvements, including higher accuracy down to 0.0001 mm, a redesigned touch screen, better air-cooling system, and faster print speed.

The device features a triple cooling fan minimizing the risk of overheating. The auto-generated supports are easy to detach by hand, ensuring smooth results. A redesigned control box has been integrated into the machine. The built-in touch screen gives you full access to all the printing settings. The Duplicator 7 Plus comes almost fully-assembled, you only have to set up the build plate and fill the resin tank.

The Flashforge Hunter is notable for producing objects of exceptional quality. The device employs a self-developed full HD projector that ensures more stability and greater printing quality. It also comes with a durable resin vat made of aluminum and adopts a purpose-built light engine. The engine can be tuned to specific wavelengths ensuring uniform UV exposure and high printing quality. The printer adopts a linear motion system that allows achieving fine surface finishes with faster build times.

The printer is controlled via a color touch screen and a button with a simple and intuitive UI. This versatile machine is used to print hearing aids, dental impressions, castable ring models, and many other functional tools. It is also suitable to print small, highly precise and accurate models.

Another great product by Wanhao, the Duplicator 8 is capable of printing one full layer at once with Z-axis resolution up to 10 microns. It is equipped with a temperature controller, 2K high-definition LCD, inner air-filtration system, and resin sensor. The high resolution of the printer provides fine, quality details.

3D models can be printed via USB flash drive or over Wi-Fi. You will be able to print wirelessly in 3 simple steps by dragging and dropping your 3D models from your device to the printer.

An upgraded version of the standard Uniz Slash, the Pro version shares all the main features of the original model while relying on the innovative proprietary Uni-Directional Peel (UDP) technology. Based on the reduction of the up-and-down peel to a one-directional action, this technology increases the print speed of the resin printer up to 600 mm/hr, without the need of pure oxygen or exotic separation materials. The high speed is also achievable thanks to the effective liquid cooling system adopted.

The Slash Pro UDP printer has a stable structure, which helps reduce column distortion, and its large print volume allows producing big parts in one go, making intricate geometries up to 400 mm tall. Thanks to its accuracy and capability, the Slash Pro can be used by both hobbyists and professionals. The final resolution and surface finish of the printed models makes them ready-to-use fresh off the printer.

The Uniz Slash 2 is a next-gen 3D printer powered by an 8.9" 4K ultra HD LCD light engine. The printer adopts a powerful 6-core CPU with 4GB RAM capable of ensuring a high level of dimensional accuracy and resolution.

The stable and robust device is composed of CNC-machined/cast aluminum parts and injection-molded elements. It features a strong, easy-to-remove dual-layer vat designed to be used with all Uniz resins. The device boasts a reliable and user-friendly 4K LCD screen, which can be easily replaced. The Uniz Slash 2 can be used for producing dental models, jewelry, miniatures, and figures.

After replacing the screen, I noticed that the iPhone performance (ios 11.4.1 - latest one) is not the same as it was before. It’s not that bad but the difference between before and not is obvious. The phone doesn’t crash or doesn’t need long to open apps, or the performance is not 1sec behind as some people complain. It’s just working little bit slower (juddery).

Finally I ordered another Display from Amazon that has a 5 Star revision (120 revisions). This one is better as the one before. It’s kind of faster but still not as fast as an original Display.

? ? Compatible Printers: Compatible with Anycubic Photon Mono X 3d lcd resin printer. Please make sure your original screen is PJ089Y2V5, not TM089CFSP01. Choose the same screen as the original screen! Otherwise it will not work!

? Customer Support: We provide 24-hour customer service,your satisfaction is our greatest pursuit. If the product is damaged when it arrives, or if you have any other questions, please contact us, we will provide you with a satisfactory solution.

All the information, data and documents are provided by ETCN only for your reference. ETCN promises to collect and edit them in due care but shall not be liable for their correction and accuracy. In case of any discrepancy, official versions and interpretations shall prevail.