samsung tft display vs amoled quotation

AMOLED and TFT are two types of display technology used in smartphones. AMOLED (active-matrix organic light-emitting diode) displays are made up of tiny organic light-emitting diodes, while TFT (Thin-Film Transistor) displays use inorganic thin-film transistors.

AMOLEDs are made from organic materials that emit light when an electric current is passed through them, while TFTs use a matrix of tiny transistors to control the flow of electricity to the display.

Refresh Rate: Another key difference between AMOLED and TFT displays is the refresh rate. The refresh rate is how often the image on the screen is updated. AMOLED screens have a higher refresh rate than TFT screens, which means that they can display images more quickly and smoothly.

Response Time: The response time is how long it takes for the pixels to change from one colour to another. AMOLED screens have a shorter response time than TFT screens..

Colour Accuracy/Display Quality: AMOLED screens are more accurate when it comes to displaying colours. This is because each pixel on an AMOLED screen emits its own light, which means that the colours are more pure and true to life. TFT screens, on the other hand, use a backlight to illuminate the pixels, which can cause the colours to appear washed out or less vibrant.

Viewing Angle: The viewing angle is the angle at which you can see the screen. AMOLED screens have a wider viewing angle than TFT screens, which means that you can see the screen from more angles without the colours looking distorted.

Power Consumption: One of the main advantages of AMOLED displays is that they consume less power than TFT displays. This is because the pixels on an AMOLED screen only light up when they need to, while the pixels on a TFT screen are always illuminated by the backlight.

Production Cost: AMOLED screens are more expensive to produce than TFT screens. This is because the manufacturing process for AMOLED screens is more complex, and the materials used are more expensive.

Availability: TFT screens are more widely available than AMOLED screens and have been around for longer. They are typically used in a variety of devices, ranging from phones to TVs.

Usage: AMOLED screens are typically used in devices where power consumption is a concern, such as phones and wearable devices. TFT screens are more commonly used in devices where image quality is a higher priority, such as TVs and monitors.

AMOLED and TFT are two different types of display technology. AMOLED displays are typically brighter and more vibrant, but they are more expensive to produce. TFT displays are cheaper to produce, but they are not as bright or power efficient as AMOLED displays.

The display technology that is best for you will depend on your needs and preferences. If you need a screen that is bright and vibrant, then an AMOLED display is a good choice. If you need a screen that is cheaper to produce, then a TFT display is a good choice. However, if you’re worried about image retention, then TFT may be a better option.

Nauticomp Inc.provides world-class fully customizable touchscreen displays for commercial and industrial settings. With features like sunlight readability, brightness adjustability, infrared lighting, full backlighting, all-weather capabilities, etc., our displays are second to none. Contact us today to learn more.

Thanks for the display technology development, we have a lot of display choices for our smartphones, media players, TVs, laptops, tablets, digital cameras, and other such gadgets. The most display technologies we hear are LCD, TFT, OLED, LED, QLED, QNED, MicroLED, Mini LED etc. The following, we will focus on two of the most popular display technologies in the market: TFT Displays and Super AMOLED Displays.

TFT means Thin-Film Transistor. TFT is the variant of Liquid Crystal Displays (LCDs). There are several types of TFT displays: TN (Twisted Nematic) based TFT display, IPS (In-Plane Switching) displays. As the former can’t compete with Super AMOLED in display quality, we will mainly focus on using IPS TFT displays.

OLED means Organic Light-Emitting Diode. There are also several types of OLED, PMOLED (Passive Matrix Organic Light-Emitting Diode) and AMOLED (Active Matrix Organic Light-Emitting Diode). It is the same reason that PMOLED can’t compete with IPS TFT displays. We pick the best in OLED displays: Super AMOLED to compete with the LCD best: IPS TFT Display.

If you have any questions about Orient Display displays and touch panels. Please feel free to contact: Sales Inquiries, Customer Service or Technical Support.

When we purchase a new smartphone we go through a list of specifications that includes the processor, software, cameras, display type, battery, etc. The display of the smartphone is something which has always been a concern for people. And smartphone technology has advanced so much in the past decade that you get several display technology options to choose from.

Today, a smartphone is not just a means to send and receive calls and texts. It has become a general necessity, so choosing the right technology should be your main priority. Coming back to displays, as we said there are plenty of display types available right now.

Two of the main contenders for display technologies that are widely available are AMOLED and LCD. Here in this article, we will be comprising AMOLED vs LCD and find out which one is better for you.

Starting with the AMOLED first, it is a part of the OLED display technology but with some more advanced features. To completely know about it must understand its all three components. The first one is LED, “Light Emitting Diode”. Then we have “O” which stands for organic and makes the OLED.

It actually means that organic material is placed with two conductors in each LED, which helps to produce the light. And the “AM” in AMOLED means Active Matrix, it has the capability to increase the quality of a pixel.

The AMOLED display is similar to the OLED in various factors like high brightness and sharpness, better battery life, colour reproduction, etc. AMOLED display also has a thin film transistor, “TFT” that is attached to each LED with a capacitor.

TFT helps to operate all the pixels in an AMOLED display. This display might have a lot of positives but there are a few negatives too let’s point both of them out.

A major issue with these displays is of burning of pixels. After showing a specific image or colour for a longer period of time, the pixel can get burned. And if there is a problem with a single pixel it will affect the entire display.

Low outdoor visibility, usually the AMOLED Displays are quote not bright in direct sunlight and outdoor readability could be a problem for some devices but average screen brightness.

The LCD stands for “Liquid Crystal Display”, and this display produces colours a lot differently than AMOLED. LCD display uses a dedicated backlight for the light source rather than using individual LED components.

The LCD displays function pretty simply, a series of thin films, transparent mirrors, and some white LED lights that distributes lights across the back of the display.

As we have mentioned, an LCD display always requires a backlight and also a colour filter. The backlight must have to pass through a thin film transistor matrix and a polarizer. So, when you see it, the whole screen will be lit and only a fraction of light gets through. This is the key difference comparing AMOLED vs LCD and this is what differentiates these two display technologies.

The LCD displays are cheaper compared to the AMOLED as there is only one source of light which makes it easier to produce. Most budget smartphones also use LCD displays.

LCD displays have bright whites, the backlight emits lots of light through pixels which makes it easy to read in outdoors. It also shows the “Accurate True to Life” colours, which means it has the colours that reflect the objects of the real world more accurately than others.

LCDs also offer the best viewing angle. Although it may depend on the smartphone you have. But most high-quality LCD displays support great viewing angles without any colour distortion or colour shifting.

The LCD displays can never show the deep blacks like AMOLED. Due to the single backlight, it always has to illuminate the screen making it impossible to show the deep blacks.

The LCDs are also thicker than other displays because of the backlight as it needs more volume. So, LCD smartphones are mostly thicker than AMOLED ones.

Both of these display technologies have their own Pros and Cons. Taking them aside everything ends up with the user preferences as people might have different preferences among different colours and contrast profiles. However, a few factors might help you to decide which one fits perfectly for you.

Let’s start with the pricing. Most AMOLED display smartphones always cost more than an LCD smartphone. Although the trend is changing a bit. But still, if you want to get a good quality AMOLED display you have to go for the flagship devices.

The colors are also very sharp and vibrant with the AMOLED displays. And they look much better than any LCD display. The brightness is something where LCDs stood ahead of the AMOLED display. So using an LCD display outdoors gives much better results.

The last thing is battery consumption, and there is no one near the AMOLED displays in terms of battery. As of now, all smartphones feature a Dark Mode and most of the apps and UI are dark black with a black background. This dark UI on smartphones doesn’t require any other light, it gives the AMOLED displays a boost in battery performance.

Looking at all these factors and comparing AMOLED vs LCD displays, the AMOLED displays are certainly better than the LCDs. Also, the big display OEMs, like Samsung and LG are focusing more the OLED technologies for their future projects. So, it makes sense to look out for AMOLED displays. That being said, if we see further enhancements in the LCD technology in terms of battery efficiency and more, there is no point to cancel them at this moment.

TFT is an abbreviation for Thin Film Transistor, a flat panel display used to improve the operation and utility of LCD screens. In order to portray an appearance to the audience, a liquid crystal display (LCD) utilizes a crystalline-filled fluid to modify rear lighting polarized origin through the use of an electromagnetic force among two relatively thin metal wires such as indium oxide (ITO). However, color TFT displays are associated with this method, which can be employed in both divided and pixelated display systems.

With motion pictures displayed on an LCD, the intrinsic sluggish rate of increase between liquid phases over a significant number of pixel components can be an issue due to capacitance impacts, which can create a blurring of the visuals. Placing a high-velocity LCD control device inside the formation of a thin-film transistor immediately next to the cell component just on a glass screen, the issue of LCD picture speed may be substantially improved, and image blur can be eliminated for all useful purposes entirely.

Organic light-emitting diodes (AMOLEDs) are a type of flat light-emitting advanced technologies that are created by interspersing a succession of organic thin sheets over two conducting conductors. An electrical charge causes a brilliant light to be produced when the current flows. AMOLED displays are light-emitting screens that do not require a backlight, making them thinner and more energy-efficient than liquid crystal displays (LCDs) (which will need a white backlight).

AMOLED displays are not only thin and fuel-intensive, but they also deliver the highest image quality available, so they can be made translucent, elastic, bendable, or even rollable and stretchy in the future, allowing for a variety of applications. AMOLEDs are a revolutionary technology in terms of display devices! It is possible to create an AMOLED by sandwiching a sequence of thin films across phase conductors. Electric charge causes a brilliant light to be emitted when the current flows through the coil.

The color display is fantastic. Color intensity, sharpness, and luminance settings that are second to none and can be customized to meet the needs of any application.

Half-Life has been expanded. TFT displays have a far longer half-life than its LED equivalents, and they are available in a number of sizes, which might have an effect on the device"s half-life based on the phone"s usage as well as other variables. Touch panels for TFT screens can be either resistant or capacitance in nature.

Due to the apparent glass panels, there is limited functionality. For instance, there are ineffective for outdoor use because the glass can display glares from its natural lighting)

They rely on backlight to give illumination rather than generating their own light. Hence they require constructed light-creating diodes (LEDs) in their backlit display framework to ensure enough brightness.

Backlighting is unnecessary for AMOLEDs. LCDs produce images by selectively blocking parts of the illumination, whereas AMOLEDs produce light. AMOLEDs utilize less energy than LCDs since they don"t need backlighting. This is critical for battery-powered devices such as phones.

While AMOLED light-emitting sheets are lightweight, the substrate can also be elastic rather than stiff. AMOLED films are not limited to glass-like LEDs and LCDs.

AMOLEDs offer 170-degree ranges of vision. LCDs operate by obscuring the light. Hence they have intrinsic viewing obstacles. In addition, AMOLEDs have a substantially wider viewing spectrum.

AMOLEDs outperform LEDs. Since AMOLED organic coatings are less than LED inorganic crystal levels, AMOLED conducting and particle emitters layers can just be multi-layered. Also, LEDs and LCDs need glass backing, which absorbs light. AMOLEDs don"t need it.

AMOLEDs seem to be simpler to implement and larger. AMOLEDs are constructed of polymers and may be produced into big sheets. It takes a lot of extra liquid crystals to build and set down.

While red and green AMOLED sheets have a greater lifespan (46,000 to 230,000 hours), azure compounds have significantly shorter longevity (up to roughly 14,000 hours).

Due to the fact that AMOLED displays inherently emit illumination, they do not need a backlight when used on a monitor screen. Conversely, LCDs require backlights since the liquid crystals themselves are incapable of producing light under their own. Direct light emission from AMOLED displays also allows for the developing of lightweight display devices than others using TFT LCDs.

LCD displays have a higher brightness than AMOLED panels. This is owing to the LCD"s usage of led backlight, which may provide a brilliant illumination of the entire display. Despite the fact that AMOLEDs produce high levels of brilliance from their illumination, they will never be able to match the intensity of LCD lighting.

LCD screens use less power than AMOLED displays, which provides a slight advantage. The amount of energy consumed by AMOLED displays is dependent on the intensity of the screen. Lowered luminance results in lower energy usage, however, it might not be the best solution because the contrast would suffer as a result of the decreased brightness. In some situations, such as when to use an AMOLED device in direct sunlight, it is not an optimal situation.

However, the backlit keys of TFT displays account for the majority of their power usage. TFT screens" efficiency is considerably improved when the backlight is set to a lesser brightness level than the default setting. For example, replacing the light of an LCD TV with just an Led flash will have no effect on the image quality, but will result in lower power usage than replacing the light of an AMOLED TV.

With the exception of phones, numerous other technologies make use of displays to allow customers to engage in direct communication with them. To determine whether or not TFT LCD will be able to withstand the development of AMOLED innovation, we should first review the benefits of LCD technology. The backlighting quality ensures that whites are strong and brightness is superb but will deplete a battery much more quickly than just an AMOLED display. Furthermore, the cost of LCD screens is a considerable consideration. In addition to being less expensive and more easily accessible, they are produced in standard industry sizes, allowing them to be purchased for innovative products with relative ease.

The world of mobile display technology is divided between those who prefer AMOLED screens and those who prefer LCD screens. OLED technology, closely related to AMOLED displays, is available on specific mobile devices. Since the two are based on fundamentally different technologies, distinct manufacturers will promote different advantages for their chosen display technology, AMOLED or LCD. AMOLED displays are becoming the standard for smartphones, whereas LCD screens are often kept for budget models.

First, let’s talk about AMOLED, similar to OLED displays but has a few more bells and whistles. One must be familiar with each of its three parts to grasp it fully. LED, short for “Light Emitting Diode,” is the first. The “O” in OLED refers to “organic,” which describes the material used to construct the device.

To put it another way, each LED has two conductors in which organic material is inserted to assist generate light. And the “AM” in AMOLED stands for Active Matrix, which may improve a pixel’s quality. High brightness and sharpness, improved battery life, accurate colour reproduction, etc., are all features shared by the AMOLED and OLED displays. A capacitor connects each LED in an AMOLED display to a thin film transistor (TFT).

TFT is used to control each pixel in an AMOLED screen. There are probably many benefits to this presentation, but because there are also some drawbacks, I’ll mention them.

The benefits of using best AMOLEDscreen include a higher contrast ratio and more vibrant colours, which contribute to a more satisfying video-viewing experience. Individual pixels may be activated or deactivated thanks to the included LEDs. The pixels in the black area of the picture will be disabled, revealing the most accurate black possible.

The use of individual LEDs improves the efficiency of the display. You may notice an increase in battery life as a result of the fact that specific pixels aren’t using any power at all.

LCD stands for “Liquid Crystal Display,” and its colour output differs from that of an AMOLED screen. Instead of employing separate LED lights for every pixel, an LCD screen has its own built-in backlight.

A backlight and colour filter are necessary components of every LCD panel, as we’ve discussed. A polarizer and a matrix of thin-film transistors are required stops for the backlight on its way to the display. This means that the whole screen will be illuminated, yet only a little amount of light will really reach the viewer. This is the main distinction between AMOLED and LCD, the two most common types of electronic displays now available.

Liquid crystal displays (LCDs) have lower production costs than AMOLEDs since they need less expensive light sources. LCD screens are also often seen in low-priced cell phones.

LCDs’ whites are so luminous because the backlight pumps so much illumination into each pixel that text on these screens can be read even in direct sunlight. Aside from that, it displays “Accurate True to Life” colours, which are most faithful to how things seem in the real world.

Let’s talk about the cost to begin. The cost of a smartphone with an AMOLED screen is often higher than that of a smartphone with an LCD screen. This, is despite the fact that the tide is beginning to turn. Even still,thebest AMOLED screen of sufficient quality are now available on only the most expensive flagship handsets. AMOLED screens also provide very crisp and vivid colours. Additionally, they surpass the visual quality of any LCD screen. Compared to an LCD, an AMOLED screen isn’t nearly as bright. Therefore, an LCD screen performs much better when used in the open air.

Finally, we look at battery life, and no other display technology comes close to AMOLEDs in this regard. All modern smartphones include a “Dark Mode,” where the screen and app icons are black. There is no need for additional lighting while using this dark user interface, which is great for smartphones with AMOLED screens.

AMOLED screens are superior to LCD displays when compared using these criteria. In addition, major display original equipment manufacturers (OEMs) like Samsung and LG emphasise OLED technology for their next endeavours. Therefore, it is prudent to keep an eye out for AMOLED screens. However, if we witness more LCD technology improvements in battery economy and more, there is no need to cancel them at this time.

An organic light-emitting diode (OLED or organic LED), also known as organic electroluminescent (organic EL) diode,light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current. This organic layer is situated between two electrodes; typically, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television screens, computer monitors, and portable systems such as smartphones and handheld game consoles. A major area of research is the development of white OLED devices for use in solid-state lighting applications.

There are two main families of OLED: those based on small molecules and those employing polymers. Adding mobile ions to an OLED creates a light-emitting electrochemical cell (LEC) which has a slightly different mode of operation. An OLED display can be driven with a passive-matrix (PMOLED) or active-matrix (AMOLED) control scheme. In the PMOLED scheme, each row and line in the display is controlled sequentially, one by one,thin-film transistor (TFT) backplane to directly access and switch each individual pixel on or off, allowing for higher resolution and larger display sizes.

An OLED display works without a backlight because it emits its own visible light. Thus, it can display deep black levels and can be thinner and lighter than a liquid crystal display (LCD). In low ambient light conditions (such as a dark room), an OLED screen can achieve a higher contrast ratio than an LCD, regardless of whether the LCD uses cold cathode fluorescent lamps or an LED backlight. OLED displays are made in the same way as LCDs, but after TFT (for active matrix displays), addressable grid (for passive matrix displays) or indium-tin oxide (ITO) segment (for segment displays) formation, the display is coated with hole injection, transport and blocking layers, as well with electroluminescent material after the first 2 layers, after which ITO or metal may be applied again as a cathode and later the entire stack of materials is encapsulated. The TFT layer, addressable grid or ITO segments serve as or are connected to the anode, which may be made of ITO or metal.transparent displays being used in smartphones with optical fingerprint scanners and flexible displays being used in foldable smartphones.

Research into polymer electroluminescence culminated in 1990, with J. H. Burroughes et al. at the Cavendish Laboratory at Cambridge University, UK, reporting a high-efficiency green light-emitting polymer-based device using 100nm thick films of poly(p-phenylene vinylene).plastic electronics and OLED research and device production grew rapidly.et al. at Yamagata University, Japan in 1995, achieved the commercialization of OLED-backlit displays and lighting.

In 1999, Kodak and Sanyo had entered into a partnership to jointly research, develop, and produce OLED displays. They announced the world"s first 2.4-inch active-matrix, full-color OLED display in September the same year.

Manufacturing of small molecule OLEDs was started in 1997 by Pioneer Corporation, followed by TDK in 2001 and Samsung-NEC Mobile Display (SNMD), which later became one of the world"s largest OLED display manufacturers - Samsung Display, in 2002.

The Sony XEL-1, released in 2007, was the first OLED television.Universal Display Corporation, one of the OLED materials companies, holds a number of patents concerning the commercialization of OLEDs that are used by major OLED manufacturers around the world.

Polymer light-emitting diodes (PLED, P-OLED), also light-emitting polymers (LEP), involve an electroluminescent conductive polymer that emits light when connected to an external voltage. They are used as a thin film for full-spectrum colour displays. Polymer OLEDs are quite efficient and require a relatively small amount of power for the amount of light produced.

Typical polymers used in PLED displays include derivatives of poly(p-phenylene vinylene) and polyfluorene. Substitution of side chains onto the polymer backbone may determine the colour of emitted lightring opening metathesis polymerization.

The bottom-emission organic light-emitting diode (BE-OLED) is the architecture that was used in the early-stage AMOLED displays. It had a transparent anode fabricated on a glass substrate, and a shiny reflective cathode. Light is emitted from the transparent anode direction. To reflect all the light towards the anode direction, a relatively thick metal cathode such as aluminum is used. For the anode, high-transparency indium tin oxide (ITO) was a typical choice to emit as much light as possible.thin film transistor (TFT) substrate, and the area from which light can be extracted is limited and the light emission efficiency is reduced.

In "white + color filter method," red, green, and blue emissions are obtained from the same white-light LEDs using different color filters.uneven degradation rate of blue pixels vs. red and green pixels. Disadvantages of this method are low color purity and contrast. Also, the filters absorb most of the light waves emitted, requiring the background white light to be relatively strong to compensate for the drop in brightness, and thus the power consumption for such displays can be higher.

Transparent OLEDs use transparent or semi-transparent contacts on both sides of the device to create displays that can be made to be both top and bottom emitting (transparent). TOLEDs can greatly improve contrast, making it much easier to view displays in bright sunlight.Head-up displays, smart windows or augmented reality applications.

In contrast to a conventional OLED, in which the anode is placed on the substrate, an Inverted OLED uses a bottom cathode that can be connected to the drain end of an n-channel TFT especially for the low cost amorphous silicon TFT backplane useful in the manufacturing of AMOLED displays.

The most commonly used patterning method for organic light-emitting displays is shadow masking during film deposition,photochemical machining, reminiscent of old CRT shadow masks, are used in this process. The dot density of the mask will determine the pixel density of the finished display.−5Pa. An oxygen meter ensures that no oxygen enters the chamber as it could damage (through oxidation) the electroluminescent material, which is in powder form. The mask is aligned with the mother substrate before every use, and it is placed just below the substrate. The substrate and mask assembly are placed at the top of the deposition chamber.virtual reality headsets.

Although the shadow-mask patterning method is a mature technology used from the first OLED manufacturing, it causes many issues like dark spot formation due to mask-substrate contact or misalignment of the pattern due to the deformation of shadow mask. Such defect formation can be regarded as trivial when the display size is small, however it causes serious issues when a large display is manufactured, which brings significant production yield loss. To circumvent such issues, white emission devices with 4-sub-pixel color filters (white, red, green and blue) have been used for large televisions. In spite of the light absorption by the color filter, state-of-the-art OLED televisions can reproduce color very well, such as 100% NTSC, and consume little power at the same time. This is done by using an emission spectrum with high human-eye sensitivity, special color filters with a low spectrum overlap, and performance tuning with color statistics into consideration.

Transfer-printing is an emerging technology to assemble large numbers of parallel OLED and AMOLED devices efficiently. It takes advantage of standard metal deposition, photolithography, and etching to create alignment marks commonly on glass or other device substrates. Thin polymer adhesive layers are applied to enhance resistance to particles and surface defects. Microscale ICs are transfer-printed onto the adhesive surface and then baked to fully cure adhesive layers. An additional photosensitive polymer layer is applied to the substrate to account for the topography caused by the printed ICs, reintroducing a flat surface. Photolithography and etching removes some polymer layers to uncover conductive pads on the ICs. Afterwards, the anode layer is applied to the device backplane to form the bottom electrode. OLED layers are applied to the anode layer with conventional vapor deposition, and covered with a conductive metal electrode layer. As of 2011mm × 400mm. This size limit needs to expand for transfer-printing to become a common process for the fabrication of large OLED/AMOLED displays.

Experimental OLED displays using conventional photolithography techniques instead of FMMs have been demonstrated, allowing for large substrate sizes (as it eliminates the need for a mask that needs to be as large as the substrate) and good yield control.

For a high resolution display like a TV, a thin-film transistor (TFT) backplane is necessary to drive the pixels correctly. As of 2019, low-temperature polycrystalline silicon (LTPS)– TFT is widely used for commercial AMOLED displays. LTPS-TFT has variation of the performance in a display, so various compensation circuits have been reported.excimer laser used for LTPS, the AMOLED size was limited. To cope with the hurdle related to the panel size, amorphous-silicon/microcrystalline-silicon backplanes have been reported with large display prototype demonstrations.indium gallium zinc oxide (IGZO) backplane can also be used.

OLEDs can be printed onto any suitable substrate by an inkjet printer or even by screen printing,plasma displays. However, fabrication of the OLED substrate as of 2018 is costlier than that for TFT LCDs.registration — lining up the different printed layers to the required degree of accuracy.

OLED displays can be fabricated on flexible plastic substrates, leading to the possible fabrication of flexible organic light-emitting diodes for other new applications, such as roll-up displays embedded in fabrics or clothing. If a substrate like polyethylene terephthalate (PET)

OLEDs enable a greater contrast ratio and wider viewing angle compared to LCDs, because OLED pixels emit light directly. This also provides a deeper black level, since a black OLED display emits no light. Furthermore, OLED pixel colors appear correct and unshifted, even as the viewing angle approaches 90° from the normal.

OLEDs also have a much faster response time than an LCD. Using response time compensation technologies, the fastest modern LCDs can reach response times as low as 1ms for their fastest color transition, and are capable of refresh frequencies as high as 240Hz. According to LG, OLED response times are up to 1,000 times faster than LCD,μs (0.01ms), which could theoretically accommodate refresh frequencies approaching 100kHz (100,000Hz). Due to their extremely fast response time, OLED displays can also be easily designed to be strobed, creating an effect similar to CRT flicker in order to avoid the sample-and-hold behavior seen on both LCDs and some OLED displays, which creates the perception of motion blur.

The biggest technical problem for OLEDs is the limited lifetime of the organic materials. One 2008 technical report on an OLED TV panel found that after 1,000hours, the blue luminance degraded by 12%, the red by 7% and the green by 8%.hours to half original brightness (five years at eight hours per day) when used for flat-panel displays. This is lower than the typical lifetime of LCD, LED or PDP technology; each rated for about 25,000–40,000hours to half brightness, depending on manufacturer and model. One major challenge for OLED displays is the formation of dark spots due to the ingress of oxygen and moisture, which degrades the organic material over time whether or not the display is powered.

However, some manufacturers" displays aim to increase the lifespan of OLED displays, pushing their expected life past that of LCD displays by improving light outcoupling, thus achieving the same brightness at a lower drive current.cd/m2 of luminance for over 198,000hours for green OLEDs and 62,000hours for blue OLEDs.hours for red, 1,450,000hours for yellow and 400,000hours for green at an initial luminance of 1,000cd/m2.

The OLED material used to produce blue light degrades much more rapidly than the materials used to produce other colors; in other words, blue light output will decrease relative to the other colors of light. This variation in the differential color output will change the color balance of the display, and is much more noticeable than a uniform decrease in overall luminance.

Blue TADF emitters are expected to market by 2020WOLED displays with phosphorescent color filters, as well as blue OLED displays with ink-printed QD color filters.

Water can instantly damage the organic materials of the displays. Therefore, improved sealing processes are important for practical manufacturing. Water damage especially may limit the longevity of more flexible displays.

As an emissive display technology, OLEDs rely completely upon converting electricity to light, unlike most LCDs which are to some extent reflective. E-paper leads the way in efficiency with ~ 33% ambient light reflectivity, enabling the display to be used without any internal light source. The metallic cathode in an OLED acts as a mirror, with reflectance approaching 80%, leading to poor readability in bright ambient light such as outdoors. However, with the proper application of a circular polarizer and antireflective coatings, the diffuse reflectance can be reduced to less than 0.1%. With 10,000 fc incident illumination (typical test condition for simulating outdoor illumination), that yields an approximate photopic contrast of 5:1. Advances in OLED technologies, however, enable OLEDs to become actually better than LCDs in bright sunlight. The AMOLED display in the Galaxy S5, for example, was found to outperform all LCD displays on the market in terms of power usage, brightness and reflectance.

While an OLED will consume around 40% of the power of an LCD displaying an image that is primarily black, for the majority of images it will consume 60–80% of the power of an LCD. However, an OLED can use more than 300% power to display an image with a white background, such as a document or web site.

OLEDs use pulse width modulation to show colour/brightness gradations, so even if the display is at 100% brightness, any pixel that"s, for example, 50% grey will be off for 50% of the time, making for a subtle strobe effect. The alternative way to decrease brightness would be to decrease the constant power to the OLEDs, which would result in no screen flicker, but a noticeable change in colour balance, getting worse as brightness decreases.

Almost all OLED manufacturers rely on material deposition equipment that is only made by a handful of companies,Canon Tokki, a unit of Canon Inc. Canon Tokki is reported to have a near-monopoly of the giant OLED-manufacturing vacuum machines, notable for their 100-metre (330 ft) size.Apple has relied solely on Canon Tokki in its bid to introduce its own OLED displays for the iPhones released in 2017.

OLED technology is used in commercial applications such as displays for mobile phones and portable digital media players, car radios and digital cameras among others, as well as lighting.Philips Lighting has made OLED lighting samples under the brand name "Lumiblade" available onlineNovaled AG based in Dresden, Germany, introduced a line of OLED desk lamps called "Victory" in September, 2011.

Nokia introduced OLED mobile phones including the N85 and the N86 8MP, both of which feature an AMOLED display. OLEDs have also been used in most Motorola and Samsung color cell phones, as well as some HTC, LG and Sony Ericsson models.ZEN V, the iriver clix, the Zune HD and the Sony Walkman X Series.

The Google and HTC Nexus One smartphone includes an AMOLED screen, as does HTC"s own Desire and Legend phones. However, due to supply shortages of the Samsung-produced displays, certain HTC models will use Sony"s SLCD displays in the future,Nexus S smartphone will use "Super Clear LCD" instead in some countries.

OLED displays were used in watches made by Fossil (JR-9465) and Diesel (DZ-7086). Other manufacturers of OLED panels include Anwell Technologies Limited (Hong Kong),AU Optronics (Taiwan),Chimei Innolux Corporation (Taiwan),LG (Korea),

DuPont stated in a press release in May 2010, that they can produce a 50-inch OLED TV in two minutes with a new printing technology. If this can be scaled up in terms of manufacturing, then the total cost of OLED TVs would be greatly reduced. DuPont also states that OLED TVs made with this less expensive technology can last up to 15 years if left on for a normal eight-hour day.

The use of OLEDs may be subject to patents held by Universal Display Corporation, Eastman Kodak, DuPont, General Electric, Royal Philips Electronics, numerous universities and others.

Flexible OLED displays have been used by manufacturers to create curved displays such as the Galaxy S7 Edge but they were not in devices that can be flexed by the users.

On 31 October 2018, Royole, a Chinese electronics company, unveiled the world"s first foldable screen phone featuring a flexible OLED display.Samsung announced the Samsung Galaxy Fold with a foldable OLED display from Samsung Display, its majority-owned subsidiary.MWC 2019 on 25 February 2019, Huawei announced the Huawei Mate X featuring a foldable OLED display from BOE.

The 2010s also saw the wide adoption of tracking gate-line in pixel (TGP), which moves the driving circuitry from the borders of the display to in between the display"s pixels, allowing for narrow bezels.

The number of automakers using OLEDs is still rare and limited to the high-end of the market. For example, the 2010 Lexus RX features an OLED display instead of a thin film transistor (TFT-LCD) display.

A Japanese manufacturer Pioneer Electronic Corporation produced the first car stereos with a monochrome OLED display, which was also the world"s first OLED product.Yazaki,Hyundai Sonata and Kia Soul EV use a 3.5-inch white PMOLED display.

By 2004, Samsung Display, a subsidiary of South Korea"s largest conglomerate and a former Samsung-NEC joint venture, was the world"s largest OLED manufacturer, producing 40% of the OLED displays made in the world,AMOLED market.million out of the total $475million revenues in the global OLED market in 2006.

Samsung SDI announced in 2005, the world"s largest OLED TV at the time, at 21 inches (53 cm).million pixels. In addition, the company adopted active matrix-based technology for its low power consumption and high-resolution qualities. This was exceeded in January 2008, when Samsung showcased the world"s largest and thinnest OLED TV at the time, at 31inches (78cm) and 4.3mm.

In October 2008, Samsung showcased the world"s thinnest OLED display, also the first to be "flappable" and bendable.mm (thinner than paper), yet a Samsung staff member said that it is "technically possible to make the panel thinner".cd/m2. The colour reproduction range is 100% of the NTSC standard.

At the Consumer Electronics Show (CES) in January 2010, Samsung demonstrated a laptop computer with a large, transparent OLED display featuring up to 40% transparency

Samsung"s 2010 AMOLED smartphones used their Super AMOLED trademark, with the Samsung Wave S8500 and Samsung i9000 Galaxy S being launched in June 2010. In January 2011, Samsung announced their Super AMOLED Plus displays, which offer several advances over the older Super AMOLED displays: real stripe matrix (50% more sub pixels), thinner form factor, brighter image and an 18% reduction in energy consumption.

On 8 January 2013, at CES Samsung unveiled a unique curved 4K Ultra S9 OLED television, which they state provides an "IMAX-like experience" for viewers.

Samsung introduced the Galaxy Round smartphone in the Korean market in October 2013. The device features a 1080p screen, measuring 5.7 inches (14 cm), that curves on the vertical axis in a rounded case. The corporation has promoted the following advantages: A new feature called "Round Interaction" that allows users to look at information by tilting the handset on a flat surface with the screen off, and the feel of one continuous transition when the user switches between home screens.

At the 2007, Las Vegas Consumer Electronics Show (CES), Sony showcased a 11-inch (28 cm), (resolution 960×540) and 27-inch (69 cm), full HD resolution at 1920 × 1080 OLED TV models.contrast ratios and total thicknesses (including bezels) of 5mm. In April 2007, Sony announced it would manufacture 1000 11-inch (28 cm) OLED TVs per month for market testing purposes.XEL-1, was the first commercial OLED TV

In May 2007, Sony publicly unveiled a video of a 2.5-inch (6.4 cm) flexible OLED screen which is only 0.3 millimeters thick.mm thick 3.5 inches (8.9 cm) display with a resolution of 320×200 pixels and a 0.3mm thick 11-inch (28 cm) display with 960×540 pixels resolution, one-tenth the thickness of the XEL-1.

In July 2008, a Japanese government body said it would fund a joint project of leading firms, which is to develop a key technology to produce large, energy-saving organic displays. The project involves one laboratory and 10 companies including Sony Corp. NEDO said the project was aimed at developing a core technology to mass-produce 40inch or larger OLED displays in the late 2010s.

In October 2008, Sony published results of research it carried out with the Max Planck Institute over the possibility of mass-market bending displays, which could replace rigid LCDs and plasma screens. Eventually, bendable, see-through displays could be stacked to produce 3D images with much greater contrast ratios and viewing angles than existing products.

In January 2015, LG Display signed a long-term agreement with Universal Display Corporation for the supply of OLED materials and the right to use their patented OLED emitters.

On 6 January 2011, Los Angeles-based technology company Recom Group introduced the first small screen consumer application of the OLED at the Consumer Electronics Show in Las Vegas. This was a 2.8" (7cm) OLED display being used as a wearable video name tag.cm) OLED displays on a standard broadcaster"s mic flag. The video mic flag allowed video content and advertising to be shown on a broadcasters standard mic flag.

On 6 January 2016, Dell announced the Ultrasharp UP3017Q OLED monitor at the Consumer Electronics Show in Las Vegas.Hz refresh rate, 0.1 millisecond response time, and a contrast ratio of 400,000:1. The monitor was set to sell at a price of $4,999 and release in March, 2016, just a few months later. As the end of March rolled around, the monitor was not released to the market and Dell did not speak on reasons for the delay. Reports suggested that Dell canceled the monitor as the company was unhappy with the image quality of the OLED panel, especially the amount of color drift that it displayed when you viewed the monitor from the sides.Hz refresh rate and a contrast ratio of 1,000,000:1. As of June, 2017, the monitor is no longer available to purchase from Dell"s website.

Apple began using OLED panels in its watches in 2015 and in its laptops in 2016 with the introduction of an OLED touchbar to the MacBook Pro.iPhone X with their own optimized OLED display licensed from Universal Display Corporation.iPhone XS and iPhone XS Max, and iPhone 11 Pro and iPhone 11 Pro Max.

On 18 October 2018, Samsung showed of their research roadmap at their 2018 Samsung OLED Forum. This included Fingerprint on Display (FoD), Under Panel Sensor (UPS), Haptic on Display (HoD) and Sound on Display (SoD).

Various venders are also researching cameras under OLEDs (Under Display Cameras). According to IHS Markit Huawei has partnered with BOE, Oppo with China Star Optoelectronics Technology (CSOT), Xiaomi with Visionox.

In 2020, researchers at the Queensland University of Technology (QUT) proposed using human hair which is a source of carbon and nitrogen to create OLED displays.

Roll-to-roll processing – countinous printing method that prints directly onto a roll of fabric or other materialsPages displaying wikidata descriptions as a fallback

Hari Singh Nalwa (Ed.), Handbook of Luminescence, Display Materials and Devices, Volume 1–3. American Scientific Publishers, Los Angeles (2003). ISBN 1-58883-010-1. Volume 1: Organic Light-Emitting Diodes

Chang, Yi-Lu; Lu, Zheng-Hong (2013). "White Organic Light-Emitting Diodes for Solid-State Lighting". Journal of Display Technology. PP (99): 1. Bibcode:2013JDisT...9..459C. doi:10.1109/JDT.2013.2248698. S2CID 19503009.

Flat-panel electronic displays: a triumph of physics, chemistry and engineering, Philosophical Transactions of the Royal Society, Volume 368, Issue 1914

D. Ammermann, A. Böhler, W. Kowalsky, Multilayer Organic Light Emitting Diodes for Flat Panel Displays Archived 2009-02-26 at the Wayback Machine, Institut für Hochfrequenztechnik, TU Braunschweig, 1995.

Ishibashi, Tadashi; Yamada, Jiro; Hirano, Takashi; Iwase, Yuichi; Sato, Yukio; Nakagawa, Ryo; Sekiya, Mitsunobu; Sasaoka, Tatsuya; Urabe, Tetsuo (25 May 2006). "Active Matrix Organic light Emitting Diode Display Based on "Super Top Emission" Technology". Japanese Journal of Applied Physics. 45 (5B): 4392–4395. Bibcode:2006JaJAP..45.4392I. doi:10.1143/JJAP.45.4392. ISSN 0021-4922. S2CID 121307571.

US 5986401, Mark E. Thompson, Stephen R. Forrest, Paul Burrows, "High contrast transparent organic light emitting device display", published 1999-11-16

Bower, C. A.; Menard, E.; Bonafede, S.; Hamer, J. W.; Cok, R. S. (2011). "Transfer-Printed Microscale Integrated Circuits for High Performance Display Backplanes". IEEE Transactions on Components, Packaging and Manufacturing Technology. 1 (12): 1916–1922. doi:10.1109/TCPMT.2011.2128324. S2CID 22414052.

Sasaoka, Tatsuya; Sekiya, Mitsunobu; Yumoto, Akira; Yamada, Jiro; Hirano, Takashi; Iwase, Yuichi; Yamada, Takao; Ishibashi, Tadashi; Mori, Takao; Asano, Mitsuru; Tamura, Shinichiro; Urabe, Tetsuo (2001). "24.4L: Late-News Paper: A 13.0-inch AM-OLED Display with Top Emitting Structure and Adaptive Current Mode Programmed Pixel Circuit (TAC)". SID Symposium Digest of Technical Papers. 32: 384. doi:10.1889/1.1831876. S2CID 59976823.

Tsujimura, T.; Kobayashi, Y.; Murayama, K.; Tanaka, A.; Morooka, M.; Fukumoto, E.; Fujimoto, H.; Sekine, J.; Kanoh, K.; Takeda, K.; Miwa, K.; Asano, M.; Ikeda, N.; Kohara, S.; Ono, S.; Chung, C. T.; Chen, R. M.; Chung, J. W.; Huang, C. W.; Guo, H. R.; Yang, C. C.; Hsu, C. C.; Huang, H. J.; Riess, W.; Riel, H.; Karg, S.; Beierlein, T.; Gundlach, D.; Alvarado, S.; et al. (2003). "4.1: A 20-inch OLED Display Driven by Super-Amorphous-Silicon Technology". SID Symposium Digest of Technical Papers. 34: 6. doi:10.1889/1.1832193. S2CID 135831267.

"Display maker Royole shows off "world"s first" flexible smartphone R". Theinquirer.net. 1 November 2018. Archived from the original on 1 November 2018. Retrieved 27 November 2019.link)

"World"s Largest 21-inch OLED for TVs from Samsung". Physorg.com. 4 January 2005. Archived from the original on 12 January 2009. Retrieved 17 August 2009.

Robischon, Noah (9 January 2008). "Samsung"s 31-Inch OLED Is Biggest, Thinnest Yet – AM-OLED". Gizmodo.com. Archived from the original on 10 August 2009. Retrieved 17 August 2009.

Ricker, Thomas (16 May 2008). "Samsung"s 12.1-inch OLED laptop concept makes us swoon". Engadget.com. Archived from the original on 7 October 2009. Retrieved 17 August 2009.

Takuya Otani; Nikkei Electronics (29 October 2008). "[FPDI] Samsung Unveils 0.05mm "Flapping" OLED Panel – Tech-On!". Techon.nikkeibp.co.jp. Archived from the original on 27 November 2008. Retrieved 17 August 2009.

Clark, Shaylin (12 January 2012). "CES 2012 Samsung"s OLED TV Rakes In Awards". WebProNews. Archived from the original on 24 November 2012. Retrieved 3 December 2012.

Alex Lane (6 September 2013). "John Lewis TV Gallery video: 4K and OLED from Samsung, Sony, LG and Panasonic". Recombu. Archived from the original on 27 September 2013. Retrieved 26 September 2013.

Sam Byford (8 October 2013). "Samsung"s Galaxy Round is the first phone with a curved display". Theverge.com. Vox Media, Inc. Archived from the original on 9 November 2013. Retrieved 10 November 2013.

It’s no secret that Samsung tends to prefer AMOLED displays over TFT LCD, particularly on its higher-end smartphones and, more recently, on select high-end tablets. Outside of Samsung, we’ve seen other manufacturers turn to the technology as well, including Motorola with the Moto X.

The biggest advantage to AMOLED is that it provides more vibrant colors and blacker blacks, though the actual differences between the two technologies are a bit more complicated than that. Probably one of the biggest disadvantages is that AMOLED displays tend to be more expensive than LCD, simply because of production challenges that have kept AMOLED yields low.

Right now manufacturing prices of AMOLED displays are 10-20% more than comparable LCD panels, but the good news for AMOLED fans is that this situation may soon change. As production yields improve, NPD DisplaySearch claims that the costs of AMOLED displays could fall below than of LCD mobile phone displays within as little as two years.

[quote qtext=”Until recently there have been few breakthroughs in the production of AMOLED displays, and the OLED industry seemed to be facing hard times. If AMOLED costs fall below LCDs, as expected, it would lead to more opportunities for the OLED display industry, greater competition with LCD, and more choices for consumers. ” qperson=”Jimmy Kim” qsource=”DisplaySearch” qposition=”center”]

So what does this mean for the industry, and for consumers? As DisplaySearch puts it, for the OLED industry it means they will be able to better compete with LCD. Meanwhile the lowering of AMOLED costs could led more manufacturers to offer devices equipped with this alternative display technology, giving consumers even more options.

The penetration rate of Samsung Display"s flexible AMOLED panels at the high-end smartphone segment in China in the first quarter of 2021 was higher than that seen a year earlier, Digitimes Research has found.

Among Chinese vendors, only Huawei and its spun-off Honor and ZTE have opted to adopt flexible AMOLED panels rolled out by local panel makers. Others, including Xiaomi and Vivo, were primarily using locally made AMOLED panels to produce mid-tier models.

Samsung Display"s newly launched E4 AMOLED panels improve the brightness of the displays to 1,500 nits from the 1,200 nits found in the previous model and reach a contrast ratio of 5-million:1, which has enabled the Korean panel maker to continue to make headways in the China market, Digitimes Research says.

Samsung Display has also lowered its rigid AMOLED panel prices, making those products more affordable than rival Chinese vendors" LTPS TFT LCD panels.

Honor has launched its first smartphone, V40, after being spun off from Huawei. The Honor V40 features a MediaTek Dimensity 1000+ CPU, with its AMOLED panels coming from BOE Technology and Visionox.

In addition to using E4 AMOLED panels from Samsung Display, Xiaomi has also purchased flexible AMOLED ones from China Star Optoelectronics Technology (CSOT) for its updated Xiaomi 10S model.

Key Difference: AMOLED is a type of screen used in consumer electronics, such as smartphones, tablets, and laptops. Gorilla Glass is a type of protection that is used on the screen.

There are many different types of screens available, such as TFT LCD, IPS-LCD, Resistive Touchscreen LCD, OLED, AMOLED, Super AMOLED, etc. Each of these types has something that helps them stand apart from the others.

AMOLED stands for Active-Matrix Organic Light-Emitting Diode or "Active Matrix OLED" for short. It is a hybrid display technology that combines the active matrix backplane from a traditional TFT display with an OLED display. The advantage of this is that it has a faster pixel switching response time than the traditional OLED displays.

Currently, AMOLED is very popular for use in mobile phones, media players and digital cameras. However, it is not currently popular for use in larger applications such as televisions or laptops.

AMOLED screen have been made popular by phone manufactures, such as Samsung, who tout its benefits. Samsung uses what it calls a Super AMOLED display in its popular Samsung Galaxy line of phones. Super AMOLED is essentially an AMOLED display that Samsung has integrated it with a digitizer, which means that the layer that detects touch is integrated into the screen, rather than overlaid on top of it.

As compared to other screens on the market, AMOLED has a faster pixel switching response than traditional OLED displays, consumes less power and has better contrast ratios than LCDs. However, AMOLED displays may be difficult to view in direct sunlight as they have reduced brightness. Also organic materials used in AMOLED displays are very prone to degradation, which may result is fading of one color over the others.

As anyone with a cracked screen knows, displays are very easy to damage. Hence, it is essential that the companies that charge so much for their product provide some form of protection on their screens. This is where Gorilla Glass comes in.

Gorilla Glass is an alkali-aluminosilicate sheet toughened glass. It is scratch resistant as well as impact resistant, which means that it will protect the display of the device against the accidental scratches made with keys in the pocket or accidentally dropping the phone.

Gorilla Glass was developed and is manufactured by Corning Inc. It was developed from a chemically strengthened glass called "Chemcor" that Corning developed in the 1960’s. Today, Gorilla Glass is used primarily for portable electronic devices, including mobile phones, portable media players, portable computer displays, and some television screens.

The main difference between Gorilla Glass and AMOLED is the fact that AMOLED is a type of display used in electronics, whereas Gorilla Glass is a type of toughened glass that acts as a screen protection, usually laid on top of the display such as AMOLED.

The Xiaomi Mi 10T and the Mi 10T Pro are Xiaomi"s latest flagship-killer grade smartphones. By nomenclature, they succeed in the Mi 9T and the Mi 9T Pro, respectively. The Mi 10T duo gets a range of updates over the Mi 9T — rebranded Redmi K20 series — including the newer, more advanced, and 5G-enabled Qualcomm Snapdragon 865 mobile platform, a 20% larger battery, improved haptics, cameras with up to 108MP resolution, etc. But before you notice any of that adding vigor to the action, the first and the most glaring feature you"re bound to notice on the Mi 10T or the Mi 10T Pro is the new, larger, and smoother hole-punch display used on these devices.

For Mi 10T and the Mi 10T, Xiaomi has chosen a 144Hz LCD that supports dynamic refresh rate switching. Their choice seemingly defies the common belief that AMOLED displays are better than LCDs, especially when we speak of flagships and flagship killers. Xiaomi challenges the notions about AMOLEDs" qualitative superiority with claims about having tuned the color profiles of the display incisively. To justify these claims, they sling catchphrases such as DCI-P3, AdaptiveSync, and more, and we"ll be addressing the relevance of each of those in the sections below.

I must remark that the vision and the perception of quality, as well as the color of a display are subjective. Therefore, instead of critically assessing the Mi 10T Pro"s display in isolation, I will also be relying majorly on comparing with the Redmi K20 Pro (which is rebranded as the Mi 9T Pro for the European market). For tangible comparison and conclusions, I"m using the free version of the Display Tester app that features a horde of qualitative tests to analyze the display on any Android device.

Meanwhile, I must also point out while setting up the Mi 10T Pro initially, the display felt as good to me as an AMOLED display in terms of color accuracy and saturation despite being aware that it is an LCD. Irrespective of that, I have taken ample precautions to prevent my first impressions from influencing my analysis of the display.

LCD and AMOLED displays operate quite differently. An LCD uses a backlight as its only source of light compared to an AMOLED display on which individual pixel lights up to show different colors. An LCD comprises many more layers than an AMOLED, and that typically leads to LCDs having lower brightness than OLED or AMOLED displays.

As per Xiaomi"s official listing, the Mi 10T series devices have a typical brightness of 450nits, which can peak to up to 600 nits with the sunlight mode. On the other hand, the Mi 9T"s AMOLED display is officially claimed to have a typical brightness of 430nits, peaking to 650nits under strong sunlight.

Although both displays are fairly bright and legible — even under a strong light source, the Mi 9T Pro"s AMOLED display feels much brighter than the Mi 10T Pro"s LCD. To quantify this, I used the Lux Light Meter Free app on the Samsung Galaxy Note 20 Ultra (which is one of the finest smartphones I"ve used lately, as mentioned in my review) and noted the brightness values (in lux) by holding the Note 20 Ultra"s ambient sensor against the display of both the smartphones. For more accuracy, I took three readings per device and then estimated the mean value. Besides, I also took the readings from a distance of ~5cm from the smartphones in a pitch dark room for an affirmative conclusion.

In the first test, the app measures the brightness of the Mi 10T Pro"s display to be 561lux (179nits). The Mi 9T Pro, on the other hand, yields a much higher brightness of 1142lux (364nits). Of course, since the values are measured using a smartphone"s ambient light sensor, they cannot be treated as absolute values. However, we can — very conveniently — use them for comparison. Based on these values, the Mi 10T Pro"s LCD comes out to be only half as bright as the Mi 9T Pro"s AMOLED.

For the second test, the ambient brightness value of the Mi 10T Pro"s display is 411lux (130nits), whereas the brightness of Mi 9T Pro"s display is measured to be 830lux (264nits). The Mi 10T Pro, once again, is left behind by a margin of over 100%. As we go farther away from the phones, a similar factor of approximated two times more brightness with the Mi 9T Pro is observed compared to the Mi 10T Pro while measuring their brightness values from distances of 1ft and 2ft. The methodology isn"t fool-proof, but it satisfies our requirement of quantifying the displays" brightness — although with a reasonable margin of error.

Quite evidently, the Mi 9T Pro"s AMOLED display appears brighter than the LCD on the Mi 10T Pro. But at the same time, we see that the LCD has a more uniform color throughout the display. The LCD"s white color also has a closer-to-neutral color temperature than the AMOLED display.

To examine further, we will be taking a few more tests from the Display Tester app into consideration — starting with the Contrast tests. For all of the following tests, the "Auto" Color Scheme has been selected on the smartphones" Display Settings. This is the default option that both of these devices ship with. While you get the option to change the white balance on both devices and even tweak values of RGB, Hue, Saturation, Contrast, and Gamma on the Mi 10T, most of the users are unlikely to fiddle with those settings.

AMOLEDs typically offer more contrast as compared to LCDs. Contrast ratio, which is expressed as the ratio of the luminescence (or the brightness) of the brightest pixels of the display to those of the darkest, is often used for advertising the accuracy of details produced by TVs and displays. On AMOLED displays, the color black is presented by turning off pixels, and this is why we often hear about AMOLEDs presenting the "true black" color. This allows the contrast ratio of AMOLED displays to tend to a significantly high value as compared to LCDs.

In practical usage, high contrast or a contrast ratio means a clearer distinction between parts of the screen. Besides the fact that AMOLED displays are usually brighter than LCDs, as we saw in the section above, the former can also get much dimmer, and therefore, allow better readability in low lighting.

Despite this variance in the quantitative values, both smartphones do not show any significant difference in terms of the quality of any content. In fact, the Contrast test from the Display Tester app reveals that the Mi 10T offers a much better distinction between different colors at low brightness.

Overall, the higher contrast allows bright shades of colors to pop out, especially dark colors dominate the frame. For instance, the visuals of a well-illuminated city or fireworks at night will appear better on the Mi 9T Pro than on the Mi 10T Pro"s display.

AMOLED displays are typically known to offer deeper and more saturated colors. However, saturation does not translate to accuracy, and Xiaomi has big claims regarding the latter. They claim that the Mi 10T Pro covers 98% colors of the DCI-P3 and 96% of the NTSC color gamuts. Besides, The Mi 10T Pro is claimed to have a Delta E value (∆E is the difference between real-life colors and the ones produced by the display; lower is better and 0 is the best) of 0.63.

In a real-life comparison with the Mi 9T Pro"s AMOLED display, the LCD on Mi 10T Pro offers