round lcd display arduino brands

» Makerfabs is Open Hardware, Arduino, Raspberry Pi, mbed, BeagleBone, IoT, Smart Home, etc, Related Products& Services Vendor for Makers and new Startups.

Keyestudio Circular TFT LCD is a 1.6-inch TFT liquid crystal display module. Its input voltage is 3.3V~-5.5V. It can display colored patterns and text.

During the experiment, we set the coordinates to the coordinate center of the display, and the maximum absolute value of the positive and negative half axes is 64.

The parameter 1.6" is marked according to the screen specifications provided by the screen supplier. The actual display area is approximately 1.26" (32mm in diameter).

This is a 1.28” LCD Display Module with an input voltage of 3.3V ~ 5.5V, which is used to display colorful patterns and characters. The driver used in this LCD is GC9A01, with a resolution of 240RGB×240 dots and 129600 bytes of GRAM inside. This LCD supports 12-bits/16-bits/18-bits data bus by MCU interface, which are RGB444, RGB565, RGB666. This LCD uses a 4-line SPI interface for reducing the GPIOs used. If you are wondering which point is the first pixel of the screen (because the screen is round), you can understand it as a square screen with an inscribed circle drawn in it, and it only displays the content in this inscribed circle. The pixels in other locations are simply discarded (just like most round smartwatches on the market).

This is a 240RGBX240 dot-matrix TFT LCD module with GC9A01. This module is composed of a TFT LCD Panel, driver ICs, FPC and a Backlight unit. It uses a full-color LCD screen with a circular appearance and is suitable for making watches, clocks, or measuring instruments. It can also connect with ESP32, Raspberry Pi, or Arduino.

And I changed the Pin atttribution for using the SPI4 bus of the arduino Nicla Vision. It compile without error and seems running but I have no results other than a black screen. I checked my wiring and my connections but I doesn"t seem to come from this.