mks tft lcd to gen 1.4 pricelist
{"id":719965224996,"title":"MKS TFT32 Touch Screen v4.0","handle":"mks-tft32-v4-0-touch-screen","description":"\u003cp\u003e\u003cspan\u003eThe MKS-TFT 32 is a color display touch screen developed by Makerbase (MKS). It works with most open source 3D printer controller. It is compatible with the MKS Base, MKS Gen and MKS Sbase control board. \u003cstrong\u003ePlease note that this display will NOT work \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003ewith the Ramps 1.4 controller.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3.2-inch color touch screen , support U disk and SD card.\u003c\/li\u003e\n\u003cli\u003eSupport APP\/BT\/editing\/local language\u003c\/li\u003e\n\u003cli\u003eReserve WIFI interface，support WIFI function by adding WIFI module.\u003c\/li\u003e\n\u003cli\u003eThree themes, two styles, provide the users with more choices.\u003c\/li\u003e\n\u003cli\u003eAllowed to self-design the interface of booting logo and all buttons.\u003c\/li\u003e\n\u003cli\u003eAllowed to add at most 13 customized function buttons.\u003c\/li\u003e\n\u003cli\u003eUpdate the configuration and firmware by SD card, easily operate.\u003c\/li\u003e\n\u003cli\u003eSupport Marlin, Repetier and Smoothieware firmware, and don’t need to modify the master program.\u003c\/li\u003e\n\u003cli\u003eSupport “print from breakpoint” function,“print from power outage” and “filament detect” function.\u003c\/li\u003e\n\u003cli\u003eSupport “auto off after printing finishes” function with “auto off after printing finishes” module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","published_at":"2017-01-29T12:26:00-05:00","created_at":"2018-05-23T16:11:16-04:00","vendor":"GENERIC","type":"Parts","tags":["electrical","LCD","MKS","new-arrivals","SD Reader"],"price":4995,"price_min":4995,"price_max":4995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8068114284580,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LCD004-MKS-TFT32","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"MKS TFT32 Touch Screen v4.0","public_title":null,"options":["Default Title"],"price":4995,"weight":800,"compare_at_price":null,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"14284580","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/mks_tft32_v.40.jpg?v=1594469293"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/mks_tft32_v.40.jpg?v=1594469293","options":["Title"],"media":[{"alt":"MKS TFT32 Touch Screen v4.0 - Digitmakers.ca providing 3d printers, 3d scanners, 3d filaments, 3d printing material , 3d resin , 3d parts , 3d printing services","id":785661067395,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3120,"width":4160,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/mks_tft32_v.40.jpg?v=1594469293"},"aspect_ratio":1.333,"height":3120,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/mks_tft32_v.40.jpg?v=1594469293","width":4160}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe MKS-TFT 32 is a color display touch screen developed by Makerbase (MKS). It works with most open source 3D printer controller. It is compatible with the MKS Base, MKS Gen and MKS Sbase control board. \u003cstrong\u003ePlease note that this display will NOT work \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003ewith the Ramps 1.4 controller.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3.2-inch color touch screen , support U disk and SD card.\u003c\/li\u003e\n\u003cli\u003eSupport APP\/BT\/editing\/local language\u003c\/li\u003e\n\u003cli\u003eReserve WIFI interface，support WIFI function by adding WIFI module.\u003c\/li\u003e\n\u003cli\u003eThree themes, two styles, provide the users with more choices.\u003c\/li\u003e\n\u003cli\u003eAllowed to self-design the interface of booting logo and all buttons.\u003c\/li\u003e\n\u003cli\u003eAllowed to add at most 13 customized function buttons.\u003c\/li\u003e\n\u003cli\u003eUpdate the configuration and firmware by SD card, easily operate.\u003c\/li\u003e\n\u003cli\u003eSupport Marlin, Repetier and Smoothieware firmware, and don’t need to modify the master program.\u003c\/li\u003e\n\u003cli\u003eSupport “print from breakpoint” function,“print from power outage” and “filament detect” function.\u003c\/li\u003e\n\u003cli\u003eSupport “auto off after printing finishes” function with “auto off after printing finishes” module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e"}
The MKS-TFT 32 is a color display touch screen developed by Makerbase (MKS). It works with most open source 3D printer controller. It is compatible with the MKS Base, MKS Gen and MKS Sbase control board. Please note that this display will NOT workwith the Ramps 1.4 controller.
You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you"re getting honest value for your money.
We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor"s store or website (including shipping, handling and fees, if applicable within Canada)
Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.
When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor"s website.
Get a free quotation for the product of your interest today. Choose from a wide range of 3D Printers , 3D Scanners, 3D Printing Filaments , 3D Resin & 3D Printing parts today ! Contact us today !
You never have to wait for a sale at DigitMakers.ca because we always price our products as competitive as possible. When you choose to shop at Digitmakers.ca, you can have peace of mind knowing you"re getting honest value for your money.
We guarantee our everyday competitive prices. If you find a lower every day or advertised price on an identical in-stock item (brand, size, model number) currently offered at any local retail competitor"s store or website (including shipping, handling and fees, if applicable within Canada)
Competitor close-out, errors or misprints, discontinued, clearance, liquidation, special order, damaged items, delivery, assembly, financing offers, short term door crashes / limited time sales (including Cyber Monday prices, Black Friday prices, Boxing Day/Week prices, etc.), member only pricing, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, limited or minimum quantity offers, and installation labour are excluded from this offer.
When shopping in our stores, just show us confirmation of the price that you have found for less from a local competitor via flyer, print-out or smartphone to show us a complete URL (web address) of the product page on the competitor"s website.
I don"t very like the product itself.. crappy firmware.. if you click on screen where you should not, the printer stop.. I will work on replacement firmware.. but, nothing to say on Digitmakers.. they are not responsible for the firmware :)
{"id":8053885515,"title":"J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS","handle":"j-head-mkiv-hotend-for-reprap-3d-printers","description":"\u003cp\u003eJ-Head MKIV Hotend is innovative light weight and simple . it works with most reprap extruders. Comes with heater cartridge and Thermostier \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e• Efficient heat transfer by eliminating the thermal conductivity from the hot end.\u003c\/li\u003e\n\u003cli\u003e• PTFE tubing (replaceable) connect or join between the PEEK insulator and the Aluminum Nozzle.\u003c\/li\u003e\n\u003cli\u003e• Light Weight\u003c\/li\u003e\n\u003cli\u003e• Plated with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness, thus ensuring finer and more stable printing.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension:\u003c\/strong\u003e 0.83 in x 0.65 in x 2.72 in (2.1 cm x 1.65 cm x 6.92 cm) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Size:\u003c\/strong\u003e 0.4 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament Size:\u003c\/strong\u003e 1.75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e : 4.94 oz (140 g)\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","published_at":"2017-01-28T12:33:42-05:00","created_at":"2017-01-28T12:33:42-05:00","vendor":"GENERIC","type":"Parts","tags":["3D Printers Hot end","electrical","J-Head","mechanical","nozzle","reprap"],"price":3999,"price_min":3999,"price_max":3999,"available":true,"price_varies":false,"compare_at_price":7000,"compare_at_price_min":7000,"compare_at_price_max":7000,"compare_at_price_varies":false,"variants":[{"id":26354891339,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX003","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS","public_title":null,"options":["Default Title"],"price":3999,"weight":500,"compare_at_price":7000,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001370","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894","options":["Title"],"media":[{"alt":"J-HEAD MKIV HOTEND FOR REPRAP 3D PRINTERS - Digitmakers.ca","id":94662787108,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/j-head-mkiv-hotend-for-reprap-3d-printers-7_gif.jpg?v=1613452894","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eJ-Head MKIV Hotend is innovative light weight and simple . it works with most reprap extruders. Comes with heater cartridge and Thermostier \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e• Efficient heat transfer by eliminating the thermal conductivity from the hot end.\u003c\/li\u003e\n\u003cli\u003e• PTFE tubing (replaceable) connect or join between the PEEK insulator and the Aluminum Nozzle.\u003c\/li\u003e\n\u003cli\u003e• Light Weight\u003c\/li\u003e\n\u003cli\u003e• Plated with anodic oxide coating, which can resist oxidation corrosion and increase nozzle hardness, thus ensuring finer and more stable printing.\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimension:\u003c\/strong\u003e 0.83 in x 0.65 in x 2.72 in (2.1 cm x 1.65 cm x 6.92 cm) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle Size:\u003c\/strong\u003e 0.4 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament Size:\u003c\/strong\u003e 1.75mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e : 4.94 oz (140 g)\n\u003c\/li\u003e\n\u003c\/ol\u003e\n"}
{"id":8058612875,"title":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm","handle":"3d-printer-extruder-drive-gear-for-1-75mm-3mm-brass-pulley-5mm","description":"\u003cp\u003e3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 11 mm x 11 mm\u003c\/li\u003e\n\u003cli\u003eInner hole: 5 mm\u003c\/li\u003e\n\u003cli\u003eGear parts: 7 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFixed screw holes: the M3 thread, two fixed screw holes, fixed more strong, can better avoid skidding gear.\u003c\/p\u003e\n\u003cp\u003eGear diameter: 11 mm\u003c\/p\u003e\n\u003cp\u003eWithin the fixed screw: M3, six Angle\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 x 3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n","published_at":"2017-01-29T12:27:07-05:00","created_at":"2017-01-29T12:27:07-05:00","vendor":"GENERIC","type":"Parts","tags":["drive gear","extruder gear","gear","mechanical"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":1000,"compare_at_price_min":1000,"compare_at_price_max":1000,"compare_at_price_varies":false,"variants":[{"id":42274930327782,"title":"26T","option1":"26T","option2":null,"option3":null,"sku":"GEN-BRS-PLY-EXTR-GR-26T","requires_shipping":true,"taxable":true,"featured_image":{"id":16467629323,"product_id":8058612875,"position":1,"created_at":"2017-01-29T12:27:07-05:00","updated_at":"2021-02-16T00:21:45-05:00","alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - Digitmakers.ca","width":620,"height":493,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Extruder-gear.png?v=1613452905","variant_ids":[42274930327782]},"available":true,"name":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - 26T","public_title":"26T","options":["26T"],"price":249,"weight":500,"compare_at_price":1000,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001250","featured_media":{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - Digitmakers.ca","id":94741561380,"position":1,"preview_image":{"aspect_ratio":1.258,"height":493,"width":620,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Extruder-gear.png?v=1613452905"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":42274930360550,"title":"40T","option1":"40T","option2":null,"option3":null,"sku":"GEN-BRS-PLY-EXTR-GR-40T","requires_shipping":true,"taxable":true,"featured_image":{"id":36500986364134,"product_id":8058612875,"position":2,"created_at":"2022-01-06T17:59:07-05:00","updated_at":"2022-01-06T17:59:09-05:00","alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - Digitmakers.ca","width":1854,"height":1853,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/IMG_0049.jpg?v=1641509949","variant_ids":[42274930360550]},"available":true,"name":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - 40T","public_title":"40T","options":["40T"],"price":249,"weight":500,"compare_at_price":1000,"inventory_quantity":75,"inventory_management":"shopify","inventory_policy":"deny","barcode":"30360550","featured_media":{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - Digitmakers.ca","id":29053284679910,"position":2,"preview_image":{"aspect_ratio":1.001,"height":1853,"width":1854,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/IMG_0049.jpg?v=1641509949"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Extruder-gear.png?v=1613452905","\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/IMG_0049.jpg?v=1641509949"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Extruder-gear.png?v=1613452905","options":["Size"],"media":[{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - Digitmakers.ca","id":94741561380,"position":1,"preview_image":{"aspect_ratio":1.258,"height":493,"width":620,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Extruder-gear.png?v=1613452905"},"aspect_ratio":1.258,"height":493,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Extruder-gear.png?v=1613452905","width":620},{"alt":"3D Printer Extruder Drive Gear for 1.75mm \u0026 3mm – Brass Pulley 5mm - Digitmakers.ca","id":29053284679910,"position":2,"preview_image":{"aspect_ratio":1.001,"height":1853,"width":1854,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/IMG_0049.jpg?v=1641509949"},"aspect_ratio":1.001,"height":1853,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/IMG_0049.jpg?v=1641509949","width":1854}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 11 mm x 11 mm\u003c\/li\u003e\n\u003cli\u003eInner hole: 5 mm\u003c\/li\u003e\n\u003cli\u003eGear parts: 7 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFixed screw holes: the M3 thread, two fixed screw holes, fixed more strong, can better avoid skidding gear.\u003c\/p\u003e\n\u003cp\u003eGear diameter: 11 mm\u003c\/p\u003e\n\u003cp\u003eWithin the fixed screw: M3, six Angle\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 x 3D Printer Extruder Drive Gear for 1.75mm \u0026amp; 3mm Filament – Brass Pulley 5mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n"}
{"id":8058603403,"title":"3D printer Flexible Helical Coupling Set of 2","handle":"3d-printer-flexible-helical-coupling-set-of-2","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 0.014 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHoles Size: \u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e5 mm \/ 8 mm\u003c\/li\u003e\n\u003cli\u003e6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength: \u003c\/strong\u003e25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 2.4 x 1.7 x 1.9 cm \/ 0.94 x 0.67 x 0.75 inches\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:26:09-05:00","created_at":"2017-01-29T12:26:09-05:00","vendor":"GENERIC","type":"Parts","tags":["coupling","flexible coupling","mechanical"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":1200,"compare_at_price_min":1200,"compare_at_price_max":1200,"compare_at_price_varies":false,"variants":[{"id":39489904541858,"title":"5\/8mm","option1":"5\/8mm","option2":null,"option3":null,"sku":"FLEX-CPL-5-8MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D printer Flexible Helical Coupling Set of 2 - 5\/8mm","public_title":"5\/8mm","options":["5\/8mm"],"price":999,"weight":100,"compare_at_price":1200,"inventory_quantity":55,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001279","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39489904574626,"title":"6mm","option1":"6mm","option2":null,"option3":null,"sku":"FLEX-CPL-2-6MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D printer Flexible Helical Coupling Set of 2 - 6mm","public_title":"6mm","options":["6mm"],"price":999,"weight":100,"compare_at_price":1200,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"04574626","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Screen-Shot-2015-05-02-at-6.46.15-PM.png?v=1613452901"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Screen-Shot-2015-05-02-at-6.46.15-PM.png?v=1613452901","options":["Size"],"media":[{"alt":"3D printer Flexible Helical Coupling Set of 2 - Digitmakers.ca","id":94740512804,"position":1,"preview_image":{"aspect_ratio":1.506,"height":362,"width":545,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Screen-Shot-2015-05-02-at-6.46.15-PM.png?v=1613452901"},"aspect_ratio":1.506,"height":362,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Screen-Shot-2015-05-02-at-6.46.15-PM.png?v=1613452901","width":545}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Weight:\u003c\/strong\u003e 0.014 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHoles Size: \u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e5 mm \/ 8 mm\u003c\/li\u003e\n\u003cli\u003e6 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength: \u003c\/strong\u003e25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Size:\u003c\/strong\u003e 2.4 x 1.7 x 1.9 cm \/ 0.94 x 0.67 x 0.75 inches\u003c\/li\u003e\n\u003c\/ul\u003e"}
{"id":8053886091,"title":"3D printer Heatsink 40*40*11mm heating block","handle":"3d-printer-heat-sink-40-40-11cm-heating-block","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter hole goods size :\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew mounting hole: \u003c\/strong\u003e3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting holes from:\u003c\/strong\u003e 31 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFin length:\u003c\/strong\u003e 40 mm ,\u003cstrong\u003ewidth:\u003c\/strong\u003e 40 mm, Thickness: \u003cstrong\u003e11 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n","published_at":"2017-01-28T12:33:45-05:00","created_at":"2017-01-28T12:33:45-05:00","vendor":"GENERIC","type":"Parts","tags":["generic","Heat sink","heatsink","mechanical"],"price":249,"price_min":249,"price_max":249,"available":true,"price_varies":false,"compare_at_price":500,"compare_at_price_min":500,"compare_at_price_max":500,"compare_at_price_varies":false,"variants":[{"id":26354891915,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-PT-HTBLKHTSNK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D printer Heatsink 40*40*11mm heating block","public_title":null,"options":["Default Title"],"price":249,"weight":100,"compare_at_price":500,"inventory_quantity":32,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001368","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Fan-Heat-Sink.png?v=1613452895"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Fan-Heat-Sink.png?v=1613452895","options":["Title"],"media":[{"alt":"3D printer Heatsink 40*40*11CM heating block - Digitmakers.ca","id":94662852644,"position":1,"preview_image":{"aspect_ratio":1.098,"height":569,"width":625,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Fan-Heat-Sink.png?v=1613452895"},"aspect_ratio":1.098,"height":569,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Fan-Heat-Sink.png?v=1613452895","width":625}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter hole goods size :\u003c\/strong\u003e 12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew mounting hole: \u003c\/strong\u003e3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting holes from:\u003c\/strong\u003e 31 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFin length:\u003c\/strong\u003e 40 mm ,\u003cstrong\u003ewidth:\u003c\/strong\u003e 40 mm, Thickness: \u003cstrong\u003e11 mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n"}
{"id":8058589387,"title":"Generic MK10 PTFE Tube","handle":"3d-printer-mk10-ptfe-tube","description":"\u003cp\u003eMK10 PTFE insert ID2 mm , OD 4 mm\u003c\/p\u003e\n\u003cp\u003eThe PTFE used inside the MK10 Extruder to provide smooth way to the filament and prevent the filament from deforming before it reaches the nozzle.\u003c\/p\u003e\n\u003cp\u003e Approximately 60mm long.\u003c\/p\u003e","published_at":"2017-01-29T12:24:39-05:00","created_at":"2017-01-29T12:24:39-05:00","vendor":"GENERIC","type":"Parts","tags":["mechanical","mk10 ptfe","ptfe","PTFE tube","ptfe-tubing","reprap"],"price":350,"price_min":350,"price_max":350,"available":true,"price_varies":false,"compare_at_price":700,"compare_at_price_min":700,"compare_at_price_max":700,"compare_at_price_varies":false,"variants":[{"id":26393769483,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EX001","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Generic MK10 PTFE Tube","public_title":null,"options":["Default Title"],"price":350,"weight":200,"compare_at_price":700,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001321","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/MK10-PTFE-Tube.jpg?v=1613452898"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/MK10-PTFE-Tube.jpg?v=1613452898","options":["Title"],"media":[{"alt":"3D Printer MK10 PTFE Tube - Digitmakers.ca","id":94737465380,"position":1,"preview_image":{"aspect_ratio":1.777,"height":893,"width":1587,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/MK10-PTFE-Tube.jpg?v=1613452898"},"aspect_ratio":1.777,"height":893,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/MK10-PTFE-Tube.jpg?v=1613452898","width":1587}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eMK10 PTFE insert ID2 mm , OD 4 mm\u003c\/p\u003e\n\u003cp\u003eThe PTFE used inside the MK10 Extruder to provide smooth way to the filament and prevent the filament from deforming before it reaches the nozzle.\u003c\/p\u003e\n\u003cp\u003e Approximately 60mm long.\u003c\/p\u003e"}
{"id":8058599371,"title":"Long Type Linear Ball Bearing Bushing LM8LUU","handle":"long-type-linear-ball-bearing-bushing-lm8luu","description":"\u003cp style=\"text-align: center;\"\u003eLong Type Linear Ball Bearing Bushing\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eModel:LM8LUU\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 8mm(ID)x15mm(OD)x45mm(L)\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eUpgrade your 3D printer and reduce the play in the linear ball bearing . This longer Linear bearing provide more stability and smoothness to your x, y axis.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:25:40-05:00","created_at":"2017-01-29T12:25:40-05:00","vendor":"GENERIC","type":"Parts","tags":["3D parts","lead screw","Linear Bearing","mechanical"],"price":449,"price_min":449,"price_max":449,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26393810699,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-BER-LM8LUU","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Long Type Linear Ball Bearing Bushing LM8LUU","public_title":null,"options":["Default Title"],"price":449,"weight":300,"compare_at_price":null,"inventory_quantity":200,"inventory_management":"shopify","inventory_policy":"deny","barcode":"15000131","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900","options":["Title"],"media":[{"alt":"Long Type Linear Ball Bearing Bushing LM8LUU - Digitmakers.ca","id":2203222474883,"position":1,"preview_image":{"aspect_ratio":1.353,"height":521,"width":705,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900"},"aspect_ratio":1.353,"height":521,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Lm8luu-8mm-x45-mm-Bearing_800x_ba7c3c86-d989-44a7-9dae-072956cbe457.jpg?v=1613452900","width":705}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"text-align: center;\"\u003eLong Type Linear Ball Bearing Bushing\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eModel:LM8LUU\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eSize: 8mm(ID)x15mm(OD)x45mm(L)\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eUpgrade your 3D printer and reduce the play in the linear ball bearing . This longer Linear bearing provide more stability and smoothness to your x, y axis.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e"}
Upgrade your 3D printer and reduce the play in the linear ball bearing . This longer Linear bearing provide more stability and smoothness to your x, y axis.
{"id":8058620491,"title":"Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6","handle":"micro-swiss-all-metal-hotend-with-slotted-cooling-block-for-duplicator-6","description":"\u003cp\u003eThis is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the following enhancement :\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage the thermal tube\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignificantly better heat transfer (this is a big one!!!)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEasier disassembly and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicro Swiss All Metal Hotend Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. The thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel is used for thermal break because it offers low thermal conductivity, and aluminum is used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotends will let you print at much higher temperature than possible with original PTFE lined ones.All metal hotend is designed to be more consistent melt chamber control. During slow extrusion rates, in PTFE lined hotends, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With an all metal design, a transition zone is always constant, being located right at the heat break. With fast extrusion rates, PTFE tube don"t have enough thermal conductivity to properly melt all the plastic coming out. On original extruders, that limitation happens around 60 mm\/s, depending on nozzle size. All metal hotends solve this problem - plastic is surrounded by a thermally conductive nozzle throughout its length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e1 Plated Brass Wear Resistant Nozzle (0.4mm)\u003c\/li\u003e\n\u003cli\u003e1 Thermal tube\u003c\/li\u003e\n\u003cli\u003e1 Slotted Cooling block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/09\/MICRO_SWISS_HOTEND_4_WANHAO_D6_STEP_BY_STEP_INSTALATION_INSTRUCTIONS.pdf\"\u003emicro_swiss_hotend_4_wanhao_d6_step_by_step_instalation_instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:27:00-05:00","created_at":"2017-01-29T12:27:57-05:00","vendor":"MicroSwiss","type":"Parts","tags":["D6","Duplicator 6","Duplicator 6S","extruder","hotend","mechanical","microswiss","mk10","wanhao"],"price":7599,"price_min":7599,"price_max":7599,"available":true,"price_varies":false,"compare_at_price":8500,"compare_at_price_min":8500,"compare_at_price_max":8500,"compare_at_price_varies":false,"variants":[{"id":26393915851,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MSW-MT-HTEND-SLCB-DUPL6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6","public_title":null,"options":["Default Title"],"price":7599,"weight":500,"compare_at_price":8500,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"866086000286","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908","options":["Title"],"media":[{"alt":"Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Duplicator 6 - Digitmakers.ca","id":94741987364,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/wanhao_d6_all_metal_upgrade_digitmakers.ca.jpg?v=1613452908","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6 with the following enhancement :\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage the thermal tube\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignificantly better heat transfer (this is a big one!!!)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eEasier disassembly and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicro Swiss All Metal Hotend Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. The thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel is used for thermal break because it offers low thermal conductivity, and aluminum is used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotends will let you print at much higher temperature than possible with original PTFE lined ones.All metal hotend is designed to be more consistent melt chamber control. During slow extrusion rates, in PTFE lined hotends, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With an all metal design, a transition zone is always constant, being located right at the heat break. With fast extrusion rates, PTFE tube don"t have enough thermal conductivity to properly melt all the plastic coming out. On original extruders, that limitation happens around 60 mm\/s, depending on nozzle size. All metal hotends solve this problem - plastic is surrounded by a thermally conductive nozzle throughout its length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e1 Plated Brass Wear Resistant Nozzle (0.4mm)\u003c\/li\u003e\n\u003cli\u003e1 Thermal tube\u003c\/li\u003e\n\u003cli\u003e1 Slotted Cooling block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/digitmakers.ca\/wp-content\/uploads\/2016\/09\/MICRO_SWISS_HOTEND_4_WANHAO_D6_STEP_BY_STEP_INSTALATION_INSTRUCTIONS.pdf\"\u003emicro_swiss_hotend_4_wanhao_d6_step_by_step_instalation_instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
{"id":8058621643,"title":"Micro Swiss MK10 SLOTTED Cooling Block","handle":"micro-swiss-mk10-slotted-cooling-block","description":"\u003cp\u003eThis is redesigned cooling block for Wanhao i3 and Wanhao i3 plus with the following improvements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage thermal tube\u003c\/li\u003e\n\u003cli\u003eSignificantly better heat transfer\u003c\/li\u003e\n\u003cli\u003eEasier disassemble and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis cooling block will work with original PTFE lined hotend, and with our Micro Swiss MK10 all metal hotend.\u003c\/p\u003e","published_at":"2017-01-29T12:28:06-05:00","created_at":"2017-01-29T12:28:06-05:00","vendor":"MicroSwiss","type":"Parts","tags":["heat block","mechanical","microswiss","mk10"],"price":2899,"price_min":2899,"price_max":2899,"available":true,"price_varies":false,"compare_at_price":3499,"compare_at_price_min":3499,"compare_at_price_max":3499,"compare_at_price_varies":false,"variants":[{"id":26393917259,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MSW-MT-HTEND-SLCB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Micro Swiss MK10 SLOTTED Cooling Block","public_title":null,"options":["Default Title"],"price":2899,"weight":300,"compare_at_price":3499,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"866086000217","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908","options":["Title"],"media":[{"alt":"Micro Swiss MK10 SLOTTED Cooling Block - Digitmakers.ca","id":94742151204,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/i3_block_1_1024x1024__87931.1465089625.1280.1280.jpg?v=1613452908","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is redesigned cooling block for Wanhao i3 and Wanhao i3 plus with the following improvements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlotted Clamping system\u003c\/li\u003e\n\u003cli\u003eNo set screw to ding and damage thermal tube\u003c\/li\u003e\n\u003cli\u003eSignificantly better heat transfer\u003c\/li\u003e\n\u003cli\u003eEasier disassemble and adjustments\u003c\/li\u003e\n\u003cli\u003ePrecise control on bore diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis cooling block will work with original PTFE lined hotend, and with our Micro Swiss MK10 all metal hotend.\u003c\/p\u003e"}
{"id":8053885899,"title":"Lead Screw with Nut 500mm","handle":"two-lead-screws-diameter-length-600mm","description":"\u003cp\u003e\u003cstrong\u003eLead Screws with Nut\u003c\/strong\u003e\u003cbr\u003e Used for Z axis 3D printer , Upgrade your printer and print longer parts.\u003cbr\u003e \u003cstrong\u003eLead Screw Diameter\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eScrew Pitch\u003c\/strong\u003e: 2mm\u003cbr\u003e \u003cstrong\u003eLead\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eLead Screw Length\u003c\/strong\u003e: 500mm\u003c\/p\u003e","published_at":"2017-01-28T12:33:00-05:00","created_at":"2017-01-28T12:33:44-05:00","vendor":"GENERIC","type":"Parts","tags":["3D parts","lead","lead screw","leadscrew","mechanical","new-arrivals","nut","screw"],"price":1999,"price_min":1999,"price_max":1999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26354891723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GEN-LDSCRW-NUT-500MM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Lead Screw with Nut 500mm","public_title":null,"options":["Default Title"],"price":1999,"weight":2000,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"10001369","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894","options":["Title"],"media":[{"alt":"Lead Screw with Nut 500mm - Digitmakers.ca","id":94662819876,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1005,"width":1005,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894"},"aspect_ratio":1.0,"height":1005,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/51PE4Fx550L._SL1005.jpg?v=1613452894","width":1005}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eLead Screws with Nut\u003c\/strong\u003e\u003cbr\u003e Used for Z axis 3D printer , Upgrade your printer and print longer parts.\u003cbr\u003e \u003cstrong\u003eLead Screw Diameter\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eScrew Pitch\u003c\/strong\u003e: 2mm\u003cbr\u003e \u003cstrong\u003eLead\u003c\/strong\u003e: 8mm\u003cbr\u003e \u003cstrong\u003eLead Screw Length\u003c\/strong\u003e: 500mm\u003c\/p\u003e"}
{"id":8058575051,"title":"3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND","handle":"3d-printer-heater-cartridge-12v-40w-for-hotend","description":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 12V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 204px;\" border=\"1\" width=\"631\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003e5 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:23:17-05:00","created_at":"2017-01-29T12:23:17-05:00","vendor":"GENERIC","type":"Parts","tags":["Cartridge","electrical","heater cartridge"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":1400,"compare_at_price_min":1400,"compare_at_price_max":1400,"compare_at_price_varies":false,"variants":[{"id":26393695883,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CRTG-HTR-12V-40W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND","public_title":null,"options":["Default Title"],"price":799,"weight":400,"compare_at_price":1400,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"93695883","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Cartridge_Heater_A-600x800.jpg?v=1613452895"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Cartridge_Heater_A-600x800.jpg?v=1613452895","options":["Title"],"media":[{"alt":"3D PRINTER HEATER CARTRIDGE 12V 40W FOR HOTEND - Digitmakers.ca","id":94736187428,"position":1,"preview_image":{"aspect_ratio":0.75,"height":800,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Cartridge_Heater_A-600x800.jpg?v=1613452895"},"aspect_ratio":0.75,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Cartridge_Heater_A-600x800.jpg?v=1613452895","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 12V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 204px;\" border=\"1\" width=\"631\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003e5 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"}
{"id":8058612683,"title":"3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND","handle":"3d-printer-heater-cartridge-24v-40w-for-hotend","description":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 24 V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 295px;\" border=\"1\" width=\"241\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater (D*L)Wire Length500mmResistance\u003c\/td\u003e\n\u003ctd\u003esize6x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-29T12:27:06-05:00","created_at":"2017-01-29T12:27:06-05:00","vendor":"GENERIC","type":"Parts","tags":["12 volts","3D parts","3D Printing","Cartridge","electrical","Heater","heater cartridge"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":26393879115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CRTG-HTR-24V-40W","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND","public_title":null,"options":["Default Title"],"price":799,"weight":400,"compare_at_price":null,"inventory_quantity":25,"inventory_management":"shopify","inventory_policy":"deny","barcode":"00001000664","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Cartridge_Heater_A-600x800_9e04b0f2-674b-469e-a49d-ed68496eb342.jpg?v=1613452905"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Cartridge_Heater_A-600x800_9e04b0f2-674b-469e-a49d-ed68496eb342.jpg?v=1613452905","options":["Title"],"media":[{"alt":"3D PRINTER HEATER CARTRIDGE 24V 40W FOR HOTEND - Digitmakers.ca","id":94741528612,"position":1,"preview_image":{"aspect_ratio":0.75,"height":800,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Cartridge_Heater_A-600x800_9e04b0f2-674b-469e-a49d-ed68496eb342.jpg?v=1613452905"},"aspect_ratio":0.75,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Cartridge_Heater_A-600x800_9e04b0f2-674b-469e-a49d-ed68496eb342.jpg?v=1613452905","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp id=\"product-name\" class=\"fn\"\u003eHEATER CARTRIDGE 24 V 40W FOR HOTEND\u003c\/p\u003e\n\u003ctable style=\"height: 295px;\" border=\"1\" width=\"241\" cellspacing=\"1\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeature\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless Steel, PVC, Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater (D*L)Wire Length500mmResistance\u003c\/td\u003e\n\u003ctd\u003esize6x20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater size\u003c\/td\u003e\n\u003ctd\u003e6x20mm(D*L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e"}
{"id":8058589771,"title":"3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY","handle":"3d-printer-2004-lcd-smart-controller-display","description":"\u003cp\u003e3D PRINTER REPRAP RAMPS 1.4 2004 LCD SMART CONTROLLER DISPLAY ADAPTER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe controller includes an SD card reader, rotary encoders and a 20-character x 4 line LCD display.\u003c\/li\u003e\n\u003cli\u003eYou can easily connect it to your RAMPS 1.4 board using \"smart adapter\" (included).\u003c\/li\u003e\n\u003cli\u003e No need to your computer\u003c\/li\u003e\n\u003cli\u003eAll further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code stored on the SD card designs.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-29T12:24:00-05:00","created_at":"2017-01-29T12:24:41-05:00","vendor":"GENERIC","type":"Parts","tags":["3D Printers Hot end","electrical","LCD"],"price":1999,"price_min":1999,"price_max":1999,"available":true,"price_varies":false,"compare_at_price":3500,"compare_at_price_min":3500,"compare_at_price_max":3500,"compare_at_price_varies":false,"variants":[{"id":26393773067,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CTRL-SMRT-LCD-2004","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY","public_title":null,"options":["Default Title"],"price":1999,"weight":800,"compare_at_price":3500,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"93773067","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/LCD.png?v=1613452899"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/LCD.png?v=1613452899","options":["Title"],"media":[{"alt":"3D PRINTER 2004 LCD SMART CONTROLLER DISPLAY - Digitmakers.ca","id":94737530916,"position":1,"preview_image":{"aspect_ratio":1.19,"height":453,"width":539,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/LCD.png?v=1613452899"},"aspect_ratio":1.19,"height":453,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/LCD.png?v=1613452899","width":539}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e3D PRINTER REPRAP RAMPS 1.4 2004 LCD SMART CONTROLLER DISPLAY ADAPTER\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe controller includes an SD card reader, rotary encoders and a 20-character x 4 line LCD display.\u003c\/li\u003e\n\u003cli\u003eYou can easily connect it to your RAMPS 1.4 board using \"smart adapter\" (included).\u003c\/li\u003e\n\u003cli\u003e No need to your computer\u003c\/li\u003e\n\u003cli\u003eAll further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code stored on the SD card designs.\u003c\/li\u003e\n\u003c\/ul\u003e"}
If you want to change some function or add new function and so on, you can refer to MKS TFT source code and build it, update it to MKS TFT, Link as below:
For more product dynamic information and tutorial materials, you can always follow MKS"s Facebook/Twitter/Discord/Reddit/Youtube and Github. Thank you!
MKS TFT 2.4 inch touch screen to control a 3D printer or CNC machine. This high quality touch screen is a controller on its own, because it has own processor onboard and does not rely on the processor of the 3D printer or CNC machine. Due to this the screen features a 2.4 inch full colour touch screen, can be integrated with WIFI upgrade, can read a SD card, can detect power failure with power detection module and filament runout with runout module.
Hi The Marlin firmware for the MKS-TFT32 on a MKS Gen v1.4 board will not compile. Can you please check your file and post the correct working version
What are the changes in the configuration for the the MKS-TFT32 display? I am using the latest version of Marlin 1.1 RC8 and I want to keep using that version.
I did that and it appeared to apply properly and I recompiled Marlin with the #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER uncommented. I uploaded Marlin but it is still not working. Any other settings?
I use an iMac and had the same problem with the weird icons. I found that the problem has to do with the filetype .bin which is copied in a specific way on a Mac. In the end I copied the files to the sd-card via the terminal command “cp -X” (https://developer.mbed.org/users/takuo/notebook/copying-bin-files-to-frdm-kl25z46z-using-cpmv-comm/). Worked for me!
Same here. I got sent v1.3 of the tft28 display. I turned it on without the sd card and it says “printready” with a bunch of blank icons. I am doing everything right. The SD card is set to fat32 with the 3 files in place. I have tried firmware 1.1.5 and 1.2. Both firmwares will update, but right after, it just says “spi loader PID Erasing”
I just wanted to add that I was having this issue and following this step solved it, at least for me. I had tried to update the MKS-TFT28 firmware before installing Marlin, and that’s when the odd images showed. I installed Marlin and then reinstalled the MKS-TFT28 firmware and all is back to normal.
Hello, i’m using TFT28 on RAMPS 1.4 , is there any way to make it work when i print from computer ? to display temperatures and other info like 12864 graphic LCD does ?
but if i print from COMPUTER through USB the TFT28 remain in main screen, does not show temperatures , fan speed or progress of printing like other lcd displays.
I have followed the instrucitons and the printer was working fine. Then i added the second extruder and for the life of me I can’t get it to see the temp of the second extruder. I changed the pin out to try another pin and it still didn’t work. I can change the Bed temp Pin and it will read it. So i know the board is good. I just need to figure out what i need for that second extruder
Hi I got the mks 1.5 board and the touch screen 3.2. Evey thing seems to work, till i go to print from the usb. Then the printer just sits there. I can move all axis I can pre heat and home all axis. and i can print from computer but stand alone cant print. Any ideals whats wrong
I have a MK Gen board, a TFT28 and a WIFI module. When the wifi module is plugged into the TFT28 and power is applied to the Gen board nothing happens. Without the wifi the Gen and the TFT power up no problem. Is this a firmware problem? Or a power problem. Right now I am on the bench using USB cable to power everything.
Hello, I am new at this but I’m interested in getting this board. The bed I want to use is 24 volts, and I know the board can accept 24 volts however, I was wondering if the Watts mattered in this instance? I was also wondering if I was putting in 24 volts then would the extruder also be getting the 24 volts or would it bring it down to 12?
Hello. I purchased MKS SBASE V1.3 + MKS TFT32 3.2” LCD Touch Display. Please help me to connect the display to the base. Menu is working, but info from the base not receive.
I have the MKS SBASE V1.3 & MKS TFT32 3.2″.After updating the firmware I noticed there no long has the ‘Set>Connect’ icon. How do I change the baud rate now? Or even see what it is set to.
It’s your firmware (the newest). Just forget it! After reading all these comments it is painfully obvious that you never answer any questions with useful information. All the answers have come from either people who figured out there own problem or customers answering customers. I’m just going to return this piece of junk and buy and actual Smoothieboard. At least they have customer service and documentation for their own products.
I have had my parts in and working well for some time now but the controller developed a problem with the 12 volt output recently. I finished one print and set it to start another and walked away while it was warming up, but when I came back a little later and noticed it still wasn’t running I checked and neither the hot-end or the bed was heating up.
Today I got a MKS TFT 3.2 in a bundle with a MKS sbase. I connected it with the AUX1 ports on both devices and plugged the board into an USB port. The board seems to work, but the TFT is just dead. On pictures in the internet I can see that there should at least light up a LED on the backside, but there is nothing.
I just noticed that the TFT gets its 5V not from the USB but from the 12V that I had not connected to this time. I had the impression from some picture in the internet that the display would work with just USB power from the board too. Now with 12V attached it works.
I would like to use a sketch of Marklin from another source. What is different about your version? Can you provide the code and where it goes so I can put it into another version? I am using the tft 3.2 controller. Many thanks!
Hi my TFT32 dose not seem to communicate with my mks sbase 1.3 connections are all OK firmware is updated to v2. however when you press on any of the icons nothing happens any ideas
I just assumed it was an upgraded version, but now I’m reading that they are completely different boards. I ordered the SBASE because I wanted to run smoothieware. Am I correct to assume that I can not install smoothieware on the MKS BASE v1.5?
Hi, please follow the instruction for MKS BASE V1.5 board to install firmware: https://osoyoo.com/2016/06/30/mks-1-4-3d-printer-board-marlin-firmware-installation-guide/
Elaine, I should clarify that I ordered the SBASE v1.3 from a seller on Amazon 4 months ago, but received the wrong board. I haven’t had a chance to start setting it up until now. Is it still true that the 32TFT in not compatible with RAMPS 1.4? If it’s not compatible with RAMPS 1.4, then can I install Smoothieware on the BASE v1.5, or can you tell me what my other options are?
My new mks tft32 touch screen is only showing one extruder.I have a tevo tarantula with dual extruders.Is there any way to show both extruders on the screen please?
Is the source code of the TFT32 available somewhere? Because most of the current menus are useless to me and I need to reconfigure my TFT32 to more useful functions for my CNC.
Hi. I just got a new FLSun Cube printer with the TFT32 screen and the mks gen l v1.0 main board. When I changed the custom loading graphic from the standard RepRap logo to my own graphic following the instructions in the guide, I get an FLSun logo overlayed in the middle of my graphic. Where is this logo coming from?
I purchased 2 of these. One to use on a Smoothieware board and the other to use on a Rambo 1.1 printer. I didn’t realize this had different connectors than those on the Rambo. Is there an adapter which will permit me to use the KINGPRINT 3D Printer Controller Board MKS TFT32 with a Rambo 1.1 board?
Touch screen / intelligent controller MKS TFT35 for 3D RepRap printers. The MKS TFT35 is a 3.5 "color touch screen for various RepRap or open source 3D printers. The screen is compatible with MKS boards such as MKS Base, MKS Gen and MKS Mini. It is easy to connect and can be easily used with marlin.It is completely open software and allows any adjustment. To simplify an individual project, various projects can be selected in the standard
Ms.Josey 
Ms.Josey