serial tft lcd price

ER-TFTM101-1 is 1024x600 dots 10.1 "color tft lcd display with RA8876 or LT7683 controller board,Optional capacitive touch panel with controller and resistive touch panel,superior display quality and easily controlled by MCU such as 8051(C51), PIC, AVR, ARDUINO,ARM and Raspberry PI .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.Portrait mode is also available.
It supports 8080 6800 8-bit,16-bit parallel,3-wire,4-wire,I2C serial spi interface.Built-in MicroSD card slot.It"s optional for touch panel controller,4-wire resistive touch panel screen. font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable mounting on board by default and suggested.
Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 10.1"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560,Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.e.

※Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (Mar-03-2021)
ER-TFTM020-1 is 320x240 dots 2" color tft lcd module display with ILI9342 controller board,optional 4-wire resistive touch panel with controller,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 8-bit /9-bit/16-bit /18-bit parallel ,3-wire,4-wire serial spi interface.Built-in optional microSD card slot . It"s optional for font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable mounting on board by default and suggested. Lanscape mode is also available.
Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 2"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560 and Uno.For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

The μLCD43(GFX) is an intelligent graphics display that harnesses the power of Active Matrix LCD (TFT) technology to deliver a diverse range of features in a single, compact cost effective unit. Embedded at the heart of the design is the PICASO-GFX2 processor.
4DGL allows the developer to write applications in a high level syntax similar to popular languages such as BASIC, C and Pascal and run it directly on the PICASO-GFX2 processor embedded in the uLCD-43 module. It allows the user to take complete control of all available resources on that hardware platform such as the Serial Ports, Graphics LCD Display, uSD memory card, I/O pins, etc. This eliminates the need for an external host controller/processor to drive the uLCD-43 module via serial commands. It provides the user complete control over the hardware module allowing them to quickly develop powerful applications.

AllAnalog to Digital ConvertersArduino Starter KitsBatteriesBattery Charger ModuleBreadboardButton Key ModuleBuzzerCamera ModuleCapacitor  Ceramic Capacitors  Electrolytic CapacitorsCases  Battery HolderConnectors  Jumper Wires  Tact SwitchCooling FanDevelopment Boards  Arduino Development Boards  Raspberry Development Boards  STM32 BoardsDiodesFingerprint SensorIntegrated Circuit  Amplifier module  Current Voltage Tester  Micro SD Storage Expansion Board  Real Time Clock Module  Relay Module  ST TIP NXPInternet Of ThingsJoy StickLaser ModuleLEDMemory ModulesMP3 Decoding board  MP3 Player ModuleMulti Coin Accetor/SelectorOptoelectronic Displays  LCD ModulesPCB BoardsPCB Connectors  Female Single Row Pin HeaderPotentiometer  Potentiometer Adjustable ResistorPotentiometer Knob CapPower AdaptorsPower Regulator Modules  Step Down ModuleProgrammer module  USB To TTL Serial Adapter Module  USB to UART TTL ModuleProximity sensorPumpsResistor  Metal Film Resistor  Photoresistor Light Dependent Resistor LDRRobotics & Aeronautics  Motors and ActuatorsSensors  Current Sensors  Door Window Sensor  Gas Sensor  Humidity Sensor  Infrared Light Sensor Module  IR Infrared Obstacle Avoidance Sensor Module  Load Cell Weighing Sensor  Microphone Sound Sensor  PIR Motion Sensor  Pulse Sensor Module  Rain Water Sensor Module  Reed Sensor Module  Sensor Shield Expansion Board  Shake Vibration Sensor Module  Soil Moisture Sensor  Speed Sensor  Temperature Sensor  Touch Button Module  Touch Sensor Module  Ultrasonic Distance Sensor  Vibration Sensor Module  Voltage Sensor Module  Water Level Sensor  Weighing Sensor ModuleServo Shield ModuleSIGNAL FREQUENCY MODULESolar Devices  Solar PanelSolenoid LockSolenoid ValveStepper Driver ChipSwitches  Push Button Switch  Slide Switch  Toggle SwitchTools  Digital Multimeter  Measurement & Analysis Instruments  Soldering ToolsTransistorsUncategorizedUsb Wi-fi AdapterVoice RecorderWater Flow SensorWireless Devices  Bluetooth & Infrared Devices  ESP32 Modules  GPS/GSM/GPRS Devices  IR Remote  RFID/ RF/ WIFI Devices  Wireless Transceiver

Serial TFT DisplayWe offer comprehensive range of serial TFT displays with versatile features that enhances its application in various fields. Our high resolution TFT displays encompasses of the following models:
We provide high grade of 5.6 TFT With RS 232 Interface that are manufactured using advance technology. Our range of TFT with interface finds its application in various areas which includes medical instrument and also in hand held instruments.

It is a 2.0 inch TFT display module.TFT liquid crystal has a semiconductor switch for each pixel,and each pixel can be directly controlled by dot pulses,so each node is relatively independent and can be continuous...

Focus Displays offers a wide range of standard full color TFT displays. 64 million unique colors, high brightness, sharp contrast, -30C operating temperature, and fast response time are all good descriptions of a TFT display. This is why TFT technology is one of the most popular choices for a new product.
Thin Film Transistor (TFT) display technology can be seen in products such as laptop computers, cell phones, tablets, digital cameras, and many other products that require color. TFT’s are active matrix displays which offers exceptional viewing experiences especially when compared to other passive matrix technologies. The clarity on TFT displays is outstanding; and they possess a longer half-life than some types of OLEDs and range in sizes from less than an inch to over 15 inches.
CCFL’s are still available, but are becoming a legacy (obsolete) component. TFT displays equipped with a CCFL require higher MOQs (Minimum Order Quantities) than displays with LED backlights.
The majority of TFT displays contain a touch panel, or touch screen. The touch panel is a touch-sensitive transparent overlay mounted on the front of the display glass. Allowing for interaction between the user and the LCD display.
Some touch panels require an independent driver IC; which can be included in the TFT display module or placed on the customer’s Printed Circuit Board (PCB). Touch screens make use of coordinate systems to locate where the user touched the screen.
Resistive touch panels are the lowest cost option and are standard equipment on many TFT modules. They are more common on smaller TFT displays, but can still be incorporated on larger modules.
Contrast ratio, or static contrast ratio, is one way to measure the sharpness of the TFT LCD display. This ratio is the difference between the darkest black and the brightest white the display is able to produce. The higher the number on the left, the sharper the image. A typical contrast ratio for TFT may be 300:1. This number ratio means that the white is 300 times brighter than the black.
TFT LCD displays are measured in inches; this is the measurement of the diagonal distance across the glass. Common TFT sizes include: 1.77”, 2.4”, 2.8”, 3”, 4.3”, 5”, 5.7”, 5.8”, 7”, 10.2”, 12.1 and 15”.
TFT resolution is the number of dots or pixels the display contains. It is measured by the number of dots along the horizontal (X axis) and the dots along the vertical (Y axis).
Certain combinations of width and height are standardized and typically given a name and a letter representation that is descriptive of its dimensions. Popular names given to the TFT LCD displays resolution include:
Transmissive displays must have the backlight on at all times to read the display, but are not the best option in direct sunlight unless the backlight is 750 Nits or higher. A majority of TFT displays are Transmissive, but they will require more power to operate with a brighter backlight.
A primary job of the driver is to refresh each pixel. In passive TFT displays, the pixel is refreshed and then allowed to slowly fade (aka decay) until refreshed again. The higher the refresh frequency, the sharper the displays contrast.
The TFT display (minus touch screen/backlight) alone will contain one controller/driver combination. These are built into the display so the design engineer does not need to locate the correct hardware.
If you do not see a Thin Film Transistor (TFT) Display module that meets your specifications, or you need a replacement TFT, we can build a custom TFT displays to meet your requirements. Custom TFTs require a one-time tooling fee and may require higher MOQs.
Ready to order samples for your TFT design? Contact one of our US-based technical support people today concerning your design requirements. Note: We can provide smaller quantities for samples and prototyping.

GTT Series is a powerful UART HMI TFT display available in Serial (RS232 & TTL), I2C, RS422, USB and Ethernet communications interfaces. Combined with the GTT Designer HMI GUI Software enables a fast and beautiful GUI designed in minutes. With other features such as tactile haptic feedback, piezo buzzer, general purpose outputs, tactile keypad and matrix keypad. The GTT includes many power options, such as 3.3V, 5V, 12V, 24V up to 40V. Many custom header solutions are available for almost any application.
Parallel TFT interface displays are a low cost solution with high customization.Our 4bit/8bit, 16bit RGB TFT or 24bit RGB TFT parallel displays come in Alphanumeric LCD/VFD and Graphic LCD or TFT with many available sizes.Character Displays from 8x2 lines to 40x4 lines in 4/8bit Parallel Interface
EVE2 & EVE3 SPI TFT EVE2 uses the FT812 or FT813, the EVE3 uses the BT815 or BT816. The EVE2/EVE3 is a powerful controller which provides a powerful feature set in a small package to create dynamic Human Machine Interfaces (HMIs). With built in graphics operations, sound synthesizer, digital filter and support for multiple widgets you can create your own stunning screens and interfaces with the EVE Screen Designer software.
HTT HDMI TFTare plug and play HDMI/DVI HMI displays with USB tft touch screens for Raspberry Pi, Windows, Linux, BeagleBone and many other systems. Vertical and Horizontal headers available for panel mounting and 24V industrial power.Industrial features include 5V, 12V, 24V DC power options in a 9-35V VPT module. Vertical or Horizontal headers along with locking headers for panel mounting. As well as enhanced ESD protection.

We provide a comprehensive range of 5.6 TFT with RS 232 Interfacewhich are manufactured using modern technology and high grade quality materials. These are mostly used in various areas consists of televisions, personal computers, medical equipments and hand held instruments. We supply these at large scales and are highly demanded in the markets. Our range comprises of control board and black light unit.

The 7.0"" enhanced Nextion HMI resistive/ capacitive touch display with an enclosure. Nextion screen is an upgraded LCD panel with more powerful features. There are two models: NX8048K070_011C and the NX8048K070_011R. The NX8048K070_011C is a powerful 7.0"" HMI TFT capacitive multi-touch display with enclosure, while the NX8048K070_011R is resistive touch panel with an enclosure. Both integrate with 32MB Flash data storage space, 1024 byte EEPROM, 8192 byte RAM, and with GPIO supported.
Nextion will help you quickly design visually in hours not weeks, turn long coding work into simple drag and drop operation, at a reasonable cost. What you only need, is interface a serial port to Nextion display hardware.
Ms.Josey
Ms.Josey