monoprice desk mount for 2 lcd displays quotation

2023-01-03 12:32:11

Mounted 2 Dell monitors. They were sell within the limit for weight.. The instructions could use some change. The end pieces must be taken off to insert the mounting plates into the arms. the mounting plates for ease of installation should be test fit to the monitors so to make sure you have the spacing correct to allow mounting the monitors onto the bracket once you"ve placed it into the arm channel. The Drawing in step 3 shows the bracket with the solid mounting plate located on top. For ease of mounting I placed the slotted part of the plate at the top. The Lock Collar mechanism is weak. It is easy to misalign the threads and the weight of two monitors allows it to slide down the pole. I found I needed to add painters tape around the pole in line with the locking collar to keep the arms at the height I wanted. Locking collar no matter how hard I tried would not engage its threads uniformly, they are just to wide apart to prevent binding as the collar twist out of alignment as you tighten it. Other than this it works great.

monoprice desk mount for 2 lcd displays quotation

I purchased this mount to stack monitors for my Digital Color grading suite. After purchasing a 3rd monitor for critical color evaluation, I found there simply wasn"t enough lateral space to accommodate the new 27 inch monitor with my other 24 and 25 inch monitors; I had to go up to be able to use all three on my current desk.

I suggest you purchase a small tube of Loctite screw thread locker (or use some fingernail polish in a pinch), back out the main screws that hold the collars that hold the VESA mounts to the pole and lock these screws down TIGHT before attempting assembly or they might loosen up and allow the monitor to swivel horizontally after mounting the monitors.

Also, since the metal parts look as if they are powder coated, the screw holes on some mating surfaces might be a bit difficult to get started, so before you are trying to balance a monitor and start a screw into a mating hole, run these screws in and out of them to clear out any manufacturing over spray in the threaded holes. Makes life easier...

If you are doing this by yourself, as I did, I found the easiest way to mount the bottom monitor to the poles were to attache the VESA mounts to the monitor, stand the monitor on its side, resting on the desktop and then bolt the VESA mount to the collar. You only then have to pivot the monitor to horizontal and then tighten the collar around the stand pipe. The top monitor should be assembled to the VESA plate, attached to the collar, roughly leveled and then lowered over the pole to the correct height. It"s tricky but it can be done by one person.

Be prepared to spend some time adjusting and re-adjusting the height, tilt and level of each monitor to get them just right, as they lock in place and are not adjustable when fully tightened. Also, be aware that if one of your monitors has a connection you use that sticks out the back of the monitor at a 90 degree angle in line directly under the VESA mount, you will have trouble tilting the monitor down. My uppermost monitor had such a cable and it took some finessing to get it in place with the stiff video cable sticking out and hitting the support pole, but I was able to make it work.

My only concern now is that I might have a stiff neck from looking up at the top monitor for long periods, but considering my other options (basically none), I"ll have to learn how to deal with it...

monoprice desk mount for 2 lcd displays quotation

Excellent question. Inside the bracket to the inside edge of the disc is only 1/2". Obviously in your case that will not clear. The disc itself is almost 1-7/8" in diameter as well.

You could put the mounting bracket "backwards" and use the holes to screw it in to the desk, rather than being clamped. I did not need to do this, but that obviously would not be as secure, depending on how well the screws bit in to the desk.

monoprice desk mount for 2 lcd displays quotation

BEST ANSWER: You ask a very perplexing question when the dimension and orientation of the monitors are not provided to solve the matter correctly. To note, with the support mount arms, when fully aligned with the edge of the desk, the portion and height on center, of the monitor"s mounts, which allow for the height of the monitors from the desktop to be 19½ inches. The support mount arms are approximately placed at a 45-degree angle from the desk surface. The height from the desk surface is approximately 19½ inches and allows for the monitor"s mounting points to span 39 inches apart between each mounting bracket, measured on center. However, the gap between the two horizontally-mounted 27-inch Monoprice monitors is just short of the 15 inches (approximately 14½") in this configuration, measured from the edge of each monitor. Of course, if the Monoprice monitors were mounted vertical configuration, the gap would be more considerable between the monitors; if that is preferred.

monoprice desk mount for 2 lcd displays quotation

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

monoprice desk mount for 2 lcd displays quotation

Monitor arms are a great invention for professionals like us who don’t really prefer to stick their neck in the same position during work. Plus, staying in the same posture and looking at the same angle can cause muscle and eye strain. And having a monitor arm allows you to enjoy your work in a flexible manner, too.

So, I’ve created this handy list for suggesting you the best monitor arms especially if you’re working from home. Come, let me share all these awesome monitor arm recommendations for graphic designers.

TechOrbits Triple Monitor Mount - Universal Desk Mount Arms for 13 to 30 Inch Computer Screen - Adjustable 3 Monitor Arm Stand w/Full Motion Swivel, Clamp & Gas Springs

3M Easy Adjust Desk Mount Dual Monitor Arm, Adjust Height, Tilt, Swivel and Rotate by Holding and Moving Monitor, Free Up Desk Space, Clamp or Grommet, For Monitors to 20 lbs <= 27", Black (MA260MB)

TechOrbits Triple Monitor Mount - Universal Desk Mount Arms for 13 to 30 Inch Computer Screen - Adjustable 3 Monitor Arm Stand w/Full Motion Swivel, Clamp & Gas Springs

3M Easy Adjust Desk Mount Dual Monitor Arm, Adjust Height, Tilt, Swivel and Rotate by Holding and Moving Monitor, Free Up Desk Space, Clamp or Grommet, For Monitors to 20 lbs <= 27", Black (MA260MB)

Wait, if you’re thinking that buying a monitor arm is just an expense then here are a few facts that you must know. There are some unseen benefits that a monitor arm offers you along with offering more space on the desk.

Do you work on your projects for longer and you’ve to stay in front of the screen for hours? You might encounter CVS (Computer Vision Syndrome) that causes your eyes to feel burdened, strained and even swell. Having a monitor arm allows you to minimize this risk and enjoy full flexibility round the clock with the ease of adjusting the screen at an ideal angle.

The monitor arm works differently than a monitor stand and therefore you’ll find them very useful. They’re usually attached to the desk, to the wall behind it, or to the ceiling and offer you the ease of adjustment. Also, this particular feature is what enables you to organize your work desk and keep those items closer that you’d need most frequently during your creative process.

There’s one more reason for switching to a monitor arm if you find yourself scuffling with the standard monitor stand, you’ll increase your productivity. When you’ve more control over your working patterns, you can focus on work without getting irritated or distracted by any uncomfortable posture which ultimately increases your productivity level.

Where you’ve to rise from your seat to adjust the monitor frequently, the monitor arm solves this issue with an extended arm length. This feature especially suits those designers who prefer touch enabled monitor screens for their home office. You’ll just have to grab your monitor, adjust it to an ideal length and you’re good to continue the work from where you left it.

Since you know why having a monitor arm is important for graphic designers, let’s move on to the main topic. Here you’ll find different monitor arm options for your home office that would keep the neck strains away.

3M Desk Mount Dual Monitor Arm comes with a nice tilt and swivel facility that ensures full flexibility throughout the working hours. Also, it can support monitors up to 27″ or smaller which makes it an ideal choice for compact monitor sizes especially for office use.

It weighs about 13.66lbs. and can support up to 20lbs. monitors with a desk mounting option that surely reduces the clutter on your work desk. Along with that, it offers you a nice arm length with its 22.87×19 inches dimensions. And the best part is its tilting features that offer you from 15 to -90 degrees tilting options and prevent neck pain, too.

3M Easy Adjust Desk Mount Dual Monitor Arm, Adjust Height, Tilt, Swivel and Rotate by Holding and Moving Monitor, Free Up Desk Space, Clamp or Grommet, For Monitors to 20 lbs <= 27", Black (MA260MB)

Expect perfect grip and ideal flexibility along with dual arms to hold 2 monitors at the same time. It tilts till 70 degrees offering you the facility to work properly if you stand up during the work. Also, it is 100% VESA compatible that guarantees a fantastic experience especially for those designers who prefer to work from home.

It offers you a nice desk mount that guarantees solid grip and an ideal length during the work. Along with offering 2 arms, 70 degree tilting feature and a study body, it fits into your interior settings with the universal black color. And you can mount up to 32″ monitors for enhancing your creative view during the work.

It comes with a nice silver, aluminum body that gives you a stylish vibe just like you showcase class in your creative work. Not only does it come with a nice desk mount but also contains small wire holders, too, to eliminate the wire cluttering issues around your desk.

And it comes with 2 monitor arms allowing you to extend your display with dual monitors that is a great help when you work on different editing programs at the same time. Along with that, you can enjoy a flexible tilting feature from 90 to -40 degrees that offers you a nice work experience and eliminates the neck strain that you’d usually have with a flat monitor arrangement.

ERGO TAB Dual Monitor Arm comes with a stable mounting option that offers you a trusted grip during work and also helps you in keeping the desk clean with small wire holders in the back. Due to its VESA compatibility, you can rest assured that your investment won’t be wasted on this magnificent product that solves your work-related challenges with an accurate view.

And the ideal installation attachments allow you to adjust it according to your work preferences in the quickest manner along with offering you a smart grommet mount base that enables you for saving much of the desk space. Enjoy your work with up to 27″ monitor screen sizes with this ideal monitor arm option.

The Amazon Basics Single Monitor Arm is a perfect option to have in your home office with its 25.6x6x16.2 Inches dimensions offering you an extended length. Along with that, the VESA compliance is another great reason to own this monitor arm and adjust it with ease.

It weighs about 7.8lbs. and can support monitors ranging from 5 to 25lbs. with its VESA compliance hinges that perfectly adjust to your monitor’s back. Also, you get to have up to 70 degrees of tilting facility while working on your creative projects. And the black color naturally fits in with your interior arrangements.

This futuristic looking monitor arm can support monitors between 7-25 lbs. with its study structure that even offers you full control over screen adjustments. Its mounting option gives you a solid grip that can boost your productivity level and maintains the pleasant mood when you’re not readjusting the stand often during the work.

It comes with 75×75 or 100x100mm holes measurements approved by VESA compliance that allows you to install it very quickly. You can install your monitors up to 34″ having the weight range between 13.2 to 33lbs. and this could be a useful addition to your home office workstation.

The grommet clamp (having size between 0.33 to 2.76″) offers you a strong grip on the table and eliminates the shakiness when the table experiences your slight jerks or push.

It comes with a nice 75×75 or 100×100 VESA approved holes that is suitable for any mid-range monitor screen. Apart from being VESA compatible, it also offers you swivel and tilting options to give your neck a relief from stiffness during the work.

Enjoy its aluminum and steel body that offers you a strong work experience while you slide it in any direction. It comes with a gas spring structure that makes the adjustment very smooth and easy. Along with that, you can also manage your wires in an organized way with the cable management system infused in its construction. Also, it is very useful for those who work on complex designs and want to view it from different angles.

If you’re a designer with horizontal viewing habits at work, Kensington’s SmartFit Ergonomic Dual Monitor Arm can be an ideal fit for your home office!

The first reason for recommending this option as the best monitor arm for graphic designers is its multiple hinges that are VESA compatible meaning you can use them for any monitor screen size up to 24 inches. Second, it offers you a wide view that is very beneficial for those who keep Illustrator, browser and any other app open in front of them during the work process.

The reason for including this monitor arm option is its ability to carry 3 monitors at the same time and that with flexible swiveling feature. This monitor arm can support between 13″ to 30″ screens and work with a wider view while brainstorming and doodling the idea. And the best part is the VESA compatible 100x100cm hinges that make your installation process extremely quick and easy.

TechOrbits Triple Monitor Mount - Universal Desk Mount Arms for 13 to 30 Inch Computer Screen - Adjustable 3 Monitor Arm Stand w/Full Motion Swivel, Clamp & Gas Springs

It’s a standard monitor arm option that is suited for monitor screens up to 32” or smaller. It’s ideal for those graphic designers who have medium size workstations and keep the monitor closer during the work. You can enjoy up to 90 degrees of tilting during the work and yes, it has 100x100mm VESA compatible hinges to offer your monitors a strong grip, too.

Selecting the right monitor arm is not very difficult if you know what exactly to seek into your prospective option. Yes, you must know what particular selection metrics should be on your list while picking the best monitor arm for graphic designers.

Every monitor arm is created to support a certain monitor size and you must check the maximum monitor support capacity while picking one. Doing this would allow you to select the most appropriate monitor arms for your home office and you won’t be facing any breakage incidents later during the work, too.

And this gives us another selection metric for picking the best monitor arm for your home office – seek maximum arms to hold your monitors properly. Doing this would allow you to spend your money on the right monitor arm choice and offer you more control over how you work.

Since you’re going to invest into a monitor arm, make sure you know what kind of mounting option it supports. There are several mounting options that you can seek into your prospective monitor arm that would best cater to your working needs such as Desk Clamp Mount, Free Standing Mount, Grommet Mount, or Wall/Ceiling Mount. So, pick the perfect mount option that best describes your work patterns.

So, do seek how far the monitor arm can reach and how flexibly it works on a slightest move when you pull the monitor over or push it away from you. To conclude this, you may read other buyer’s reviews who have used it before and ensure that your selection is perfect in every way.

If you ask me, I’d pick TechOrbits’ 3 monitor arm for a wider view that enables us to keep multiple programs open during the work and enhance our overall productivity. But you’re welcome to explore other monitor arm options from the list above.

monoprice desk mount for 2 lcd displays quotation

So does this monitor hold a 34 inch 17 lb monitor? Technically... yes. But not without some crazy amount of torque, additional tools and compromises.This monitor might not have the best tilt function, but it does look quite nice.These stands will fall forward when you attempt to mount an Alienware AW3418DW 34 inch ultrawide when using an acceptable amount of force to tighten the tension washers. It is possible to make this stand work, but not really and it is a pain in the butt.I was unable to get this stand to work due to the way the bolt system is designed using the tightening system -- as is. It is impossible to get the bolt tight enough without the nut sliding out of the poorly designed hole that holds it in place. After tightening these to the max, the result is a monitor that falls forward and a nut/bolt that spins in place.The gap next to the nut isn"t wide enough for a standard craftsman crescent wrench to fit in without scratching/bending the metal, but that will be the only way to tighten this. I was able to tighten the joint enough after using an 8 inch crescent wrench and 8 inch wrench with torque bit. I had to put an insane amount of on the bolt in order to get the joint to not fall forward - we are talking lug nut lbs of force here. My hands hurt.Another disadvantage of this stand is that the rotation from side to side (the horizon line) cannot be tightened. With a heavy monitor, barely touching the monitor, or having cables that push to one side will cause the monitor to tilt unlevel.The cable trough along the bottom arm is oddly narrow and will make marks on thicker cables on its sharp metal edges. You can, however fit at least 5 cables in it by pushing them into the small crack one at a time (the crack opens up into a larger space, but the edges of the crack have rough sharp edges).There is no cable holder when using the through hole mount, but there is one for the edge mount. This leaves me feeling a bit shorted, since I use the through hole mount. I had to make my own cable holder to pull the cables together from each arm.I like the finish and style of this monitor arm. And I was finally able to get it to work, but not without scaring up the back of the mount near the monitor and some ungodly troubleshooting and over-tightening.Improvements suggestions I have for this monitor stand are:--Easier access to adjust the force needed for arm rotation at EVERY joint--A total redesign up/down rotation joint bolt system because it doesn"t meet your quoted specs (without some additional tools and bypassing the octagon shaped hole/plate holding the nut in place)--Widen the cable gap on the lower monitor arm joint--A larger plate for the through hole mount (the current mount plate slips too easily during arm adjustment because of the amount of force needed to rotate the first joint) even after tightening the hand screw to be probably too tight--Inclusion of a cable holder for the through hole mount type (even if it"s a simple sleeve or clip - your leaving part of your customer base out)--Redesign of the left/right "horizon" tilt to include an adjustable bolt instead of just a non-adjustable pinConclusion:Is this monitor affordable? Yes. Does it look nice? Yes. Is it a legitimate solution with the quoted specs? That"s a big maybe. You can probably get it to work, but it"s not going to be easy if you have a monitor over 15lbs.I was finally able to get this to hold my Alienware montiors after finding a crescent wrench to hold the tilt bolt while tightening with a torque bit on a ratchet arm. The bolt/nut is no longer held in place punched hole in the plate that makes up the tilting mechanism.

monoprice desk mount for 2 lcd displays quotation

Computer Monitor Mounts & Stands└ Monitors, Projectors & Accs└ Computers/Tablets & NetworkingAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else

monoprice desk mount for 2 lcd displays quotation

[EDITOR"S NOTE: Here"s the snippet of Monoprice"s CES 2015 press release announcing new products, including the 22-inch HD SmartTouch Interactive Pen Drawing Display, which went on sale this morning for $799. This is higher than had previously been announced, but significantly less than Wacom"s Cintiq 24HD which retails for $3000 and has been the only multi-touch capable pen display on the market.]

LAS VEGAS, NV--(Marketwired - January 06, 2015) - Monoprice, an e-commerce leader that offers exceptional quality consumer electronics and tech gear at prices much lower than those of their competitors, today announced the release of a new suite of innovative tech solutions at the 2015 Consumer Electronics Show (CES). Featuring the latest advancements in hardware design and technology integration, Monoprice continues to disrupt the status quo by delivering premium products at affordable price points.

"We pride ourselves on keeping our finger on the pulse of technology trends and continuously introducing the most sought-after consumer electronics at fair prices," said Bernard Luthi, President of Monoprice. "CES is the perfect launchpad for all of our latest innovations, including key items in the rapidly advancing home security and display technology categories."

monoprice desk mount for 2 lcd displays quotation

Made use of theDAC with1.5 years later withYPbPr cables. Note for Super NT users, if you have a jittery image, go to Settings -> System -> Hardware, check ‘Dejitter’ to fix the image. Took me a few mins to figure it out. Gonna test SG/32X l8r.

monoprice desk mount for 2 lcd displays quotation

Limited Liability: In no event shall VIVO or its owner, subsidiaries, affiliates, or suppliers be liable for any special, indirect, incidental or consequential damages arising out of or in connection with the products or these terms and conditions (however arising, including negligence), including lost profits, whether or not the possibility of such damages was, or could have been, known. The liability of VIVO and its owner, subsidiaries, affiliates, and suppliers, and the respective employees, to you or any third parties in any circumstance, is limited to the amount paid by you for the product purchased hereunder. By bidding on this item, you agree to these terms and conditions. Buyer agrees that any and all sales of merchandise offered through VIVO constitutes a sale under applicable Illinois law with jurisdiction and venue solely and exclusively in Woodford County, Illinois.

Warranty & Returns: If you have any questions or concerns please contact us before placing your order. Please note, the warranty period for items varies by product category. Warranty is applicable to items purchased through VIVO or a registered VIVO vendor selling through an affiliated third-party marketplace. Warranty includes product defects and does not include damages resulted from user error. Things that void a warranty and further business with VIVO include physical abuse of the item, improper use, permanent alterations, failure to return all pieces/parts, returns resulting in product damages due to insufficient packaging or swearing/threatening customer support.

Any product being returned to us must have an RMA number included. Failure to include RMA number may result in delayed processing. Refunds or replacements may take up to 3-5 business days from receipt to be processed. Return shipping charges on items that are ordered in error or no longer needed are non-refundable. VIVO is not responsible for providing box(es) or packing materials for any return shipments. Items returned damaged due to insufficient packaging will not be processed. Any product utilized in food processing must be thoroughly cleaned prior to return.

monoprice desk mount for 2 lcd displays quotation

You Might Also Be Interested In