how to program lcd display pricelist

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Looking to take your project to the next level in terms of functionality and appearance? A custom LCD display might be the thing that gets you there, at least compared to the dot-matrix or seven-segment displays that anyone and their uncle can buy from the usual sources for pennies. But how does one create such a thing, and what are the costs involved? As is so often the case these days, it’s simpler and cheaper than you think, and [Dave Jones] has a great primer on designing and specifying custom LCDs.

The video below is part of an ongoing series; a previous video covered the design process, turning the design into a spec, and choosing a manufacturer; another discussed the manufacturer’s design document approval and developing a test plan for the module. This one shows the testing plan in action on the insanely cheap modules – [Dave] was able to have a small run of five modules made up for only $138, which included $33 shipping. The display is for a custom power supply and has over 200 segments, including four numeric sections, a clock display, a bar graph, and custom icons for volts, amps, millijoules, and watt-hours. It’s a big piece of glass and the quality is remarkable for the price. It’s not perfect – [Dave] noted a group of segments on the same common lines that were a bit dimmer than the rest, but was able to work around it by tweaking the supply voltage a bit.

We’re amazed at how low the barrier to entry into custom electronics has become, and even if you don’t need a custom LCD, at these prices it’s tempting to order one just because you can. Of course, you can also build your own LCD display completely from scratch too.

Our B grade category is for OEM LCD’s that have some defects or were previously refurbished 1 to 3 dead pixels are allowed Touch function must be in good working order

Our C grade category is for an OEM LCD with light bruising on black display. and/or up to 3 to 6 dead pixels. Touch function must be in good working order.

Our D grade category is for an OEM LCD with heavy bruising. noticeable on any background. and/or 6 or more dead pixels. Touch function must be in good working order.

Due to the current market trends we are no longer able to accept any aftermarket LCD’s. We will either send them back to you or recycle them responsibly, For furrger clarification please conact your Account Manager.

Mosaic Pablo video tile (46-inch diagonal). Includes display tile and electronics, Mosaic Power Supply Module, Mosaic Mount, Mosaic Project Designer software.

Mosaic Vincent video tile (55-inch diagonal). Includes display tile and electronics, Mosaic Power Supply Module, Mosaic Mount, Mosaic Project Designer software.

55in. diagonal edge-lit LED professional LCD. 24x7 reliability. 1920x1080. 700 nits brightness. Data, video, HD-SDI inputs. RS-232, Ethernet control. Landscape and portrait. Requires at least 1.2 in. mount depth (Compatible with WMT-MXL only).

55in Transparent display, OLED panel, black, ERO bonded glass, HDMI x4, DP x1 inputs, FHD (1920x1080), landscape or portrait - inverted or tiling mounting possible, internal power, standard mount

55in Transparent display, OLED panel, black, ERO bonded glass, HDMI x4, DP x1 inputs, FHD (1920x1080), landscape or portrait - inverted or tiling mounting possible, internal power, straight mount

Clarity Matrix LX46HD: 46" 1920x1080, 450 nit LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Landscape Only.

Clarity Matrix LX46HD with ERO: 46" 1920x1080, 450 nit LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Landscape Only.

Clarity Matrix LX46HD: 46" 1920 x 1080, 450 nit LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Portrait Only. Special Order Item Longer Lead time applies.

Clarity Matrix LX46 3D: 46" WXGA 3D LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Landscape Only.

Clarity Matrix LX55HD: 55" 1920x1080, 450 nit LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Landscape Only.

Clarity Matrix LX55HD with ERO: 55" 1920x1080, 450 nit LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Landscape Only.

Clarity Matrix LX55HD with ERO: 55" 1920x1080, 450 nit LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Portrait Only. Special Order Item Longer Lead time applies.

Clarity Matrix MX46HD: 46" 1920x1080 LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Landscape Only.

Clarity Matrix MX55: 55" 1920x1080 LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Landscape Only.

Clarity Matrix MX55 with ERO: 55" 1920x1080 LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Landscape Only.

Clarity Matrix MX55: 55" 1920x1080 LCD video wall system. Includes 1 LCD module, required power supply, quad controller electronics and mount. Portrait Only. Special Order Item Longer Lead time applies.

46in diagonal touchscreen, full HD, ultra slim, LED backlight, 24x7 reliability, metal bezel, landscape/portrait mode, VGA, HDMI, DVI, DisplayPort inputs, RS-232 control, speakers.

55in diagonal touchscreen, full HD, ultra slim, LED backlight, 24x7 reliability, metal bezel, landscape/portrait mode, VGA, HDMI, DVI, DisplayPort inputs, RS-232 control, speakers.

55 in. diagonal edge-lit LED professional LCD. Ultra slim, narrow bezel, low power, and lightweight. 1920x1080 resolution with 400 nits brightness . DVI, HDMI, Display Port, VGA inputs. Supports up to 10x10 Video Wall mode. IR, RS-232, and Ethernet control. Landscape and portrait.

15 inch Black HID Compliant 5-wire Resistive Touchscreen LCD, dual Serial and USB controller, VGA, external DC power supply, speakers, -3 to 25 degree tilt range, 75mm VESA compatible.

17 inch Black HID Compliant single-touch 5-wire resistive LED LCD, dual Serial and USB controller, VGA, internal power, DC power connector, speakers, -5 to 90 degree tilt range, 75 mm and 100mm VESA compatible.

17 inch Black HID Compliant 5-wire Resistive Touchscreen edge-lit LED LCD, USB controller, VGA, internal power, speakers, -5 to 90 degree tilt range, 100mm VESA compatible.

19" Black 5-Wire Resistive Touch Screen LCD with dual serial/USB Driver, Analog/DVI-D, internal power, speakers, 5 to 90 tilt - Supports MSR Kit 997-5618-00

32-inch wide black projected capacitive multi-touch FHD edge-lit LED LCD, USB controller, HDMI, DP, DVI-D and VGA inputs, Control via RS-232, internal power, speakers, 600 x 200 mm, 200 x 200 mm VESA compatible, no desk stand.

86in diagonal, UHD, D-LED backlight, 500 nit brightness, 24x7 reliability, single- or quad-source viewing, speakers, embedded ContentSmart media player, landscape and portrait, ERO with Gorilla Glass, 20 pt IR touch

TD3200 LookThru 32 inch Transparent LCD Display Box, White, ERO(TM) Bonded Glass, HDMI Input, 1366x768 res, 29.5in x 17.5in x 15.0in (WxHxD), 200 x 200 mm VESA, External Power.

1) TWA Series 0.9mm LED Cabinet for MIDDLE/BOTTOM position with Integrated DUAL Power Supply, Leyard Control Software and power, control and video interconnects.

1) TWA Series 0.9mm LED Cabinet for MIDDLE/BOTTOM position with Integrated SINGLE Power Supply, Leyard Control Software and power, control and video interconnects.

1) TWA Series 0.9mm LED Cabinet for TOP position with DUAL Integrated Power Supply, Leyard Control Software and power, control and video interconnects.

1) TWA Series 0.9mm LED Cabinet for TOP position with SINGLE Integrated Power Supply, Leyard Control Software and power, control and video interconnects.

75in diagonal, UHD, D-LED backlight, 500 nit brightness, 24x7 reliability, MediaPlex Plus Processing, speakers, OPS slot, landscape and portrait, ERO with Gorilla Glass, 32 pt IR touch

86in diagonal, UHD, D-LED backlight, 500 nit brightness, 24x7 reliability, MediaPlex Plus Processing, speakers, OPS slot, landscape and portrait, ERO with Gorilla Glass, 32 pt IR touch. Single TouchMark key included.

Using industrial embedded platform, the system is stable and reliable, it has rich interface.Wireless communication GPS navigation, fault detection, video capture and other functions, can be extended to provide users with a powerful mobile multimedia information system.

Programmable controller supports modbus and BACnet protocols, isolated power supply and optp isolated communication, with 35mm DIN rail installation accessories and SD Nand flash

The T3E-6CT is general purpose input / ouput modules for building integrators, providing convenient termination for field devices and interfacing to your HVAC, lighting, temperature sensors, and other typical building automation applications.

T3 series I/O module,32 Universal Inputs@0-5V,0-10V,20mA.(Note:This product has reached ‘end of life’, for new projects please refer to the T3E-22i,https://bravocontrols.com/shop/bacnet-modbus-modules/)

The ME237 Three-phase power meter with Rogowski coils makes for easy retrofit installation on both three and four wire systems. Supports Modbus RTU protocol over RS485 for integeration into building management systems.

Humidity&Temp transmitter with 2.0 meter cable & remote display, 87mm probe,BACnet, Modbus, RS485, Ethernet.Analog Output 0-5V,10V,20mA jumper select. With POE

Humidity&Temp transmitter with 2.0 meter cable & remote display, 87mm probe,BACnet, Modbus, RS485, Ethernet.Analog Output 0-5V,10V,20mA jumper select.

Duct mount，PM2.5/10 Particle Counter, BACnet MS/TP and Modbus RTU protocols over RS485,Output 0-5V, 0-10V ,4-20mA jumper select, with 960mm long pitot.

Duct mount,PM2.5/10 Particle Counter,BACnet MS/TP and Modbus RTU protocols over RS485,Output 0-5V, 0-10V ,4-20mA jumper select, with 600mm long pitot.

Duct mount,PM2.5/10 Particle Counter,BACnet MS/TP and Modbus RTU protocols over RS485,Output 0-5V, 0-10V ,4-20mA jumper select, with 150mm long pitot.

Duct mount,PM2.5/10 Particle Counter,BACnet MS/TP and Modbus RTU protocols over RS485,Output 0-5V, 0-10V ,4-20mA jumper select, with 100mm long pitot.

Duct mount,PM2.5/10 Particle Counter,BACnet MS/TP and Modbus RTU protocols over RS485,Output 0-5V, 0-10V ,4-20mA jumper select, with 200mm long pitot.

Duct mount,PM2.5/10 Particle Counter,BACnet MS/TP and Modbus RTU protocols over RS485,Output 0-5V, 0-10V ,4-20mA jumper select, with 250mm long pitot.

Duct mount,PM2.5/10 Particle Counter,BACnet MS/TP and Modbus RTU protocols over RS485,Output 0-5V, 0-10V ,4-20mA jumper select, with 300mm long pitot.

Duct mount,PM2.5/10 Particle Counter,BACnet MS/TP and Modbus RTU protocols over RS485,Output 0-5V, 0-10V ,4-20mA jumper select, with 1000mm long pitot.

CO2 Duct Mount Sensor,Modbus, Ethernet, RS485,Analog Output 0-5V, 10V ,20mA jumper select. Without Temperature&Humidity sensors, with 150mm long pitot.

CO2 Duct Mount Sensor with Temperature&Humidity sensor included, Modbus，Ethernet,RS485, Analog Output 0-5V, 10V ,20mA jumper select, with 150mm long pitot.

Tstat8 Bacnet/Modbus thermostat with RS485, Color LCD, CO2, Humidity, 8UI, 2AO, 4DO@2A.(Details are here，https://bravocontrols.com/shop/tstat8-bacnet-thermostat/)

CO2 Duct Mount Sensor with Temperature&Humidity sensor included, Modbus，Ethernet,RS485, Analog Output 0-5V, 10V ,20mA jumper select, with 150mm long pitot.With POE

CO2 Duct Mount Sensor,Modbus, Ethernet, RS485,Analog Output 0-5V, 10V ,20mA jumper select. Without Temperature&Humidity sensors, with 150mm long pitot.With POE

Bacnet Room Setpoint & Temp Display can be used in environment monitoring and controlling in industrial,commercial and other buildings,Modbus RS485/Bacnet MS/TP for direct digital reading on all models.

Water Temp Sensor, metal 11-10 electrical box, 2″length, 1/2″ NPT thread, fits 6mm dia probes, fits 2 inch well sold separately, 10K type 2 thermistor.

Water Temp Sensor, metal 11-10 electrical box, 4″length, 1/2″ NPT thread, fits 6mm dia probes, fits 4 inch well sold separately, 10K type 3 thermistor.

Water Temp Sensor, metal 11-10 electrical box, 2″length, 1/2″ NPT thread, fits 6mm dia probes, fits 2 inch well sold separately, 10K type 3 thermistor.

Water Temp Sensor, metal 11-10 electrical box, 6″length, 1/2″ NPT thread, fits 6mm dia probes, fits 6 inch well sold separately, 10K type 2 thermistor.

Water Temp Sensor, metal 11-10 electrical box, 6″length, 1/2″ NPT thread, fits 6mm dia probes, fits 6 inch well sold separately, 10K type 3 thermistor.

Water Temp Sensor, metal outdoor electrical box, 6″length, 1/2″ NPT thread, fits 6mm dia probes,fits 6 inch well sold separately, 10K type 2 thermistor.

Water Temp Sensor, metal outdoor electrical box, 6″length, 1/2″ NPT thread, fits 6mm dia probes,fits 6 inch well sold separately,10K type3 thermistor.

Water Temp sensor, 6″length, 1/2″ NPT thread, fits 6mm dia probes, electrical box is not included, fits 6 inch well sold separately, including nut, 10K type 2 thermistor.

Water Temp sensor, 6″length, 1/2″ NPT thread, fits 6mm dia probes, electrical box is not included, fits 6 inch well sold separately, including nut, 10K type 3 thermistor.

Water Temp sensor, 4″length, 1/2″ NPT thread, fits 6mm dia probes, electrical box is not included, fits 4 inch well sold separately, 10K type 3 thermistor.

Water Temp sensor, 2″length, 1/2″ NPT thread, fits 6mm dia probes, electrical box is not included, fits 2 inch well sold separately, 10K type 3 thermistor.

Water Temp Sensor, metal 11-10 electrical box, 4″length, 1/2″ NPT thread, fits 6mm dia probes, fits 4 inch well sold separately, 10K type 2 thermistor.

Water Temp Sensor, metal outdoor electrical box, 2″length, 1/2″ NPT thread, fits 6mm dia probes, fits 2 inch well sold separately, 10K type 2 thermistor.

Water Temp Sensor, metal outdoor electrical box, 4″length, 1/2″ NPT thread, fits 6mm dia probes, fits 4 inch well sold separately, 10K type 2 thermistor.

Water Temp sensor, 2″length, 1/2″ NPT thread, fits 6mm dia probes, electrical box is not included, fits 2 inch well sold separately, 10K type 2. thermistor

Water Temp sensor, 4″length, 1/2″ NPT thread, fits 6mm dia probes, electrical box is not included, fits 4 inch well sold separately, 10K type 2 thermistor.

4-pipe application, with ON-OFF switch and 3-speed fan switch, LCD display system mode and °C or °F temperature,heat-cool switched automatically,230VAC.

4-pipe application, with ON-OFF switch and 3-speed fan switch, LCD display system mode and °C or °F temperature,heat-cool switched automatically,24VAC.

4-pipe application, with ON-OFF switch and 3-speed fan switch, LCD display system mode and °C or °F temperature,heat-cool switched automatically,220VAC.

The "Plug-in" I/O Module series provide general purpose interfacing for DDC and industrial automation systems. The modules plug into industry standard termination boards and provide optical isolation between the controller and field devices. Color coding identifies modules at a glance.

The MY2N Relay is a general purpose plug in relay with a LED for power switching applications,built-in diode and surge suppression, test push buttons and more.MY2 = 2-Pole; MY4 = 4-Pole; N = LED; Z = Bifurcated; I = Push-to-Test.

Actuator, 1000N torque, 24VAC only, with self-stroke adjustment, with 0(2)~10Vdc or 0(4)~20mA DC input control signal and 0~10Vdc feedback signal，with manual operator

Terminal shorting bar,10 pin.Use these strips to run a common conductor through multiple terminals on any of the Temco T3 series controllers and I/O modules.  The outer bar is covered in high temperature ABS. They’re available in 10 pin only version for now, you can cut them down for shorter runs or gang them up for longer runs.

The product is AC to DC switching power transfer device,of which the black pluggable connector fits onto most Temco products, or can be taken off to connect to your own devices.

Red Flashing Strobe Annunciator, 24VDC, Alarm current:<40mA, Operating temperature:-20°C~+60°C,Waterproof rating:IP65,Flash 60±3 times/min,Sound:8 different tones,Operating humidity:<95% RH

iFixit has been offering OLED screens for those who would like to tackle repairs on their own. Those go for around $100 less than what Apple charges for an official screen replacement but now, it’s started offering LCD replacement for iPhone X, XS, and XS Max. It’s an interesting downgrade from OLED but some on a budget with DIY interest might find it’s a great option.

Apple’s screen repair costs jumped considerably with the arrival of the iPhone X. At this point, it costs between $279 and $329 to get an OLED on the X, XS, and 11 Pro.

we’re now offering an LCD screen option for the iPhone X, XS, and XS Max. These LCDs (and their Fix Kits) are less than half the price of the OLED models we sell. They’re a little darker (about 50 nits worth), the resolution is a little lower, and the colors and contrast ratio won’t be quite the same.

But you might remember that, until a couple years ago, most phones had LCD displays, including phones you probably loved. Apple notably stuck with LCD displays while Samsung was experimenting with early OLED, and Apple still uses LCDs in its iPhone 8 and XR models.

Indeed, it’s like turning your X or XS into a XR, display-wise anyway. iFixit’s new LCD options run $75 for the X, $85 for the XS, and then jump up to $165 for the XS Max.

iFixit highlights “these LCD replacements are hand-tested in the USA to our rigorous quality standards, and we back them up with a lifetime warranty.”