lcd panel tn ips quotation

Yoon, S., Won, T.: Electrode Structure for High Transmittance and Aperture Ratio in TFT-LCD. Journal of Materials Processing Technology 191, 302–305 (2007)

Again, IPS is the clear winner here. The vertical viewing angles are very similar to the horizontal ones on both IPS and VA panels. Unfortunately, this is one area where TN panels are usually much, much worse. TN monitors degrade rapidly from below, and colors actually inverse - resulting in a negative image that can be distracting. For this reason, if you decide to buy a TN monitor, look for one with an excellent height adjustment, or consider buying a VESA mounting arm, as you should mount TN monitors at eye level. Even when mounted properly, larger TN displays can appear non-uniform at the edges.

There"s usually not much difference between VA and IPS panels in terms of gray uniformity. It"s rare for monitors to have uniformity issues, and even on monitors that perform worse than average, it"s usually not noticeable with regular content. TN monitors tend to perform a bit worse than usual, though, and the top half of the screen is almost always darker than the rest, but that"s an artifact of the bad vertical viewing angles.

Black uniformity tends to vary significantly, even between individual units of the same model, and there"s no single panel type that performs the best. It"s rare for monitors to have good black uniformity, and almost every monitor we"ve tested has some noticeable cloudiness or backlight bleed. IPS and TN panels can look slightly worse due to their low contrast ratios, as the screen can take on more of a bluish tint when displaying dark scenes. Like with contrast, black uniformity issues usually aren"t very noticeable unless you"re looking at dark content and you"re in a dark room. If you only use your monitor in a bright environment, generally speaking, you don"t need to worry about black uniformity.

Historically, TN panels used to have the worst colors, as many of them were cheaper models that only supported 6-bit colors or used techniques like dithering (FRC) to approximate 8-bit colors. Most displays today, including TN models, are at least 8 bit, and many of them are even able to approximate 10-bit colors through dithering. New technologies, like LG"s Nano IPS and Samsung"s Quantum Dot, add an extra layer to the LCD stack and have significantly improved the color gamut of modern IPS and VA displays, leaving TN a bit behind. Between them, NANO IPS is slightly better, as it tends to offer better coverage of the Adobe RGB color space. Although the difference is minor, IPS panels still have a slight edge over VA and TN displays.

Although TN panels have caught up a bit in the SDR color space, they"re far behind when it comes to HDR, so if you"re looking for a good HDR color gamut, avoid TN panels. Between VA and IPS panels, the difference isn"t as significant; however, IPS panels still have a slight edge. The best VA panels top out at around 90% coverage of the DCI P3 color space used by most current HDR content. IPS panels go as high as 98% coverage of DCI P3, rivaling even some of the best TVs on the market. Due to the very high coverage of DCI P3 on both VA and IPS, the difference isn"t that noticeable, though, as most content won"t use the entire color space anyway.

Although not necessarily as noticeable to everyone as the differences in picture quality, there can also be a difference in motion handling between IPS, VA, and TN displays. TN panels historically offered the best gaming performance, as they had the highest refresh rates and extremely fast response times. Manufacturers have found ways to drastically improve the motion handling of VA and IPS panels, though, and the difference isn"t as pronounced.

LCD panel technology has changed drastically over the last few years, and the historical expectations for response time performance don"t necessarily hold anymore. For years, TN monitors had the fastest response times by far, but that"s started to change. New high refresh-rate IPS monitors can be just as fast.

VA panels are a bit of a strange situation. They typically have slightly slower response times overall compared to similar TN or IPS models. It"s especially noticeable in near-black scenes, where they tend to be significantly slower, resulting in dark trails behind fast-moving objects in dark scenes, commonly known as black smear. Some recent VA panels, such as the Samsung Odyssey G7 LC32G75T, get around it by overdriving the pixels. It results in much better dark scene performance but a more noticeable overshoot in brighter areas.

Within each of the three types of LCD we mentioned, other related panel types use the same basic idea but with slight differences. For example, two popular variants of IPS panels include ADS (technically known as ADSDS, or Advanced Super Dimension Switch) and PLS (Plane to Line Switching). It can be hard to tell these panels apart simply based on the subpixel structure, so we"ll usually group them all as IPS, and in the text, we"ll usually refer to them as IPS-like or IPS family. There are slight differences in colors, viewing angles, and contrast, but generally speaking, they"re all very similar.

There"s another display technology that"s growing in popularity: OLED. OLED, or organic light-emitting diode, is very different from the conventional LCD technology we"ve explored above. OLED panels are electro-emissive, which means each pixel emits its own light when it receives an electric signal, eliminating the need for a backlight. Since OLED panels can turn off individual pixels, they have deep, inky blacks with no blooming around bright objects. They also have excellent wide viewing angles, a near-instantaneous response time, and excellent gray uniformity.

OLED panels aren"t perfect, though. There"s a risk of permanent burn-in, especially when there are lots of static elements on screen, like the UI elements of a PC. There aren"t many OLED monitors available, either, but they"ve started to gain popularity as laptop screens and for high-end monitors, but they"re very expensive and hard to find. They"re also not very bright in some cases, especially when large bright areas are visible on screen. The technology is still maturing, and advances in OLED technology, like Samsung"s highly-anticipated QD-OLED technology, are promising.

As you can probably tell by now, no one panel type works best for everyone; it all depends on your exact usage. Although there used to be some significant differences between panel types, as technology has improved, these differences aren"t as noticeable. The two exceptions to this are viewing angles and contrast. If you"re in a dark room, a VA panel that can display deep blacks is probably the best choice. If you"re not in a dark room, you should focus on the other features of the monitor and choose based on the features that appeal to your exact usage. IPS panels are generally preferred for office use, and TN typically offers the best gaming experience, but recent advancements in VA and IPS technology are starting to change those generalizations. For the most part, the differences between each panel type are so minor now that it doesn"t need to be directly factored into your buying decision.

IPS (In-Plane Switching) lcd is still a type of TFT LCD, IPS TFT is also called SFT LCD (supper fine tft ),different to regular tft in TN (Twisted Nematic) mode, theIPS LCD liquid crystal elements inside the tft lcd cell, they are arrayed in plane inside the lcd cell when power off, so the light can not transmit it via theIPS lcdwhen power off, When power on, the liquid crystal elements inside the IPS tft would switch in a small angle, then the light would go through the IPS lcd display, then the display on since light go through the IPS display, the switching angle is related to the input power, the switch angle is related to the input power value of IPS LCD, the more switch angle, the more light would transmit the IPS LCD, we call it negative display mode.

The regular tft lcd, it is a-si TN (Twisted Nematic) tft lcd, its liquid crystal elements are arrayed in vertical type, the light could transmit the regularTFT LCDwhen power off. When power on, the liquid crystal twist in some angle, then it block the light transmit the tft lcd, then make the display elements display on by this way, the liquid crystal twist angle is also related to the input power, the more twist angle, the more light would be blocked by the tft lcd, it is tft lcd working mode.

A TFT lcd display is vivid and colorful than a common monochrome lcd display. TFT refreshes more quickly response than a monochrome LCD display and shows motion more smoothly. TFT displays use more electricity in driving than monochrome LCD screens, so they not only cost more in the first place, but they are also more expensive to drive tft lcd screen.The two most common types of TFT LCDs are IPS and TN displays.

Your gaming monitor is one of the most important parts of your PC, and a big part of that is down to the type of panel it uses to display all those lovely polygons. You"ve probably seen lots of different monitor panel types crop up in a gaming screen"s specs sheet, too: words like TN, IPS and VA. But what do they actually mean, and how do they affect the quality of your gaming monitor? Well, as you"ve probably guessed from the title up top there, I"m going to tell you everything you need to know about all the different gaming monitor panel types, including their strengths, weaknesses and which one you should look to buy if you want the best possible image quality.

Now, I"m going to warn you - most of what you"ll read below is all going to be pretty general. Not all panel types behave the same way, for example, and there will always be some that outperform the rest. That"s why it"s still important to read proper reviews of gaming monitors so you can get an accurate picture of how a monitor"s panel type stacks up against the rest.

I"m also not going to spend ages talking about the exact chemical structure of every single type of sub-pixel, because, well, there are plenty of other people who have done that already. If you"re after that kind of detail, I"d suggest heading over to the folks at TFT Central. Instead, I"m going to be concentrating on what you actually need to know about gaming monitor panel types, such as how their various characteristics affect their performance, and how you can avoid falling into monitor misery by making sure you know exactly what specs sheets are talking about when they start throwing a million acronyms at you. So let"s get to it.

Let"s start with one of the most common monitor panel types available today: TN, or Twisted Nematic. TN panels are what you"ll find in most gaming monitors these days, especially ones with high refresh rates and those geared toward competitive esports and the like.

The good: That"s because they"re a) generally quite cheap to make and b) have the fastest response times out of all the different panel types. This means there"s less lag between you clicking your mouse or tapping your keyboard and that action being translated onscreen, making them ideal for twitchy shooters and games that need fast reaction times.

The bad: Alas, the disadvantage of picking a TN panel is that they generally don"t have the best colour accuracy and they also have quite narrow viewing angles. The former isn"t the case for every TN screen - those certified by Nvidia for use in their G-Sync gaming monitors, for instance, have to meet rigorous colour accuracy standards - but I"ve seen plenty of non-G-Sync screens that barely cover 85% of the standard sRGB colour gamut, which means washed out colours and generally not very rich and vibrant images.

Viewing angles, on the other hand, are a bit more of a hurdle. Most of the time you"ll see them quoted as 160 / 170 degrees, but unless you"re looking at the screen just right, colours can sometimes look a bit off, while contrast goes up the spout. As a result, getting a TN monitor with a height-adjustable stand as opposed to a fixed one can often be a good way to counteract this problem, as this gives you more flexibility to get the monitor in exactly the right position.

IPS monitors, on the other hand, are all about colour accuracy. Largely made by LG, there have actually been lots of different types of IPS panel that have emerged over the years as varying manufacturers tried their hand at matching the quality of LG"s panels, leading to dozens of different variations and combinations of acronyms. These days, though, most manufacturers (especially gaming ones) just tend to say they"re IPS as opposed a specific variant.

Unless, that is, it"s an AHVA, or Advanced Hyper-Viewing Angle, panel. Despite sounding like a VA panel (our third main panel type, which you"ll find more on below), AHVA is actually another type of IPS panel produced by AU Optronics and offers pretty much identical performance to a classic LG IPS panel.

The good: As I just mentioned, IPS panels generally have pretty great colour accuracy (I normally expect an sRGB coverage score of around 96% here) and wide viewing angles, making them better suited to colour intensive work and tasks like photo and video editing. This is true across all types of IPS panel, and their superior viewing angles (often quoted as 178 / 178 degrees) means you don"t get that nasty colour or contrast shift when you"re looking at the screen from a funny angle.

The bad: Unfortunately, their response times are often slower than TN panels, although these have become a lot better in recent years. Personally, I"ve never had any problems with latency when playing games on this type of screen, and for me, image quality is a lot more important than a couple of millisecond"s difference in overall response time.

They can also be more expensive to produce than TN panels, which, combined with their slower response times, is another reason why you don"t tend to see them a lot in displays designed primarily for gaming.

Finally, there"s the VA, or Vertical Alignment panel. Much like IPS, there are dozens of different types of VA panel, but the main ones we need to concern ourselves with are MVA (multi-domain vertical alignment) and AMVA (advanced MVA).

MVA panels were first designed to sit in the middle of TN and IPS displays, offering better viewing angles than TN screens and higher contrast ratios and deeper blacks than IPS. However, their colour accuracy isn"t quite as good as IPS, and they don"t have very fast response times, either.

AMVA, on the other hand (not to be confused with the IPS-like AHVA panel tech described above) builds on that even further, improving the panel"s colour accuracy while still maintaining those ultra high contrast ratios and deep blacks. Its viewing angles still aren"t quite as wide as IPS displays, though, and its response times are still a bit slower as well. However, through the use of features like a monitor"s Overdrive function, VA response times are now much faster than they used to be, making them a much more common occurrence in gaming screens, especially when it comes to curved or ultrawide displays.

The good: As a result, VA monitors can sort of be viewed as the ultimate compromise screen. The key advantages are their best in class black levels and their superior contrast ratios, and compared to TN panels, they also have better viewing angles and higher colour accuracy.

The bad: However, while VA might rectify some of the weaknesses you"ll find in TN screens, they"re still not as colour accurate as IPS panels, and their narrower viewing angles also can"t compete with their IPS rivals, either. Their main weakness, however, is their slow response time, which is generally said to be the slowest of the three main panel types. As I said, steps have been taken to try and mitigate this when it comes to putting a VA panel inside a gaming monitor, but if your gaming library consists solely of competitive shooters and the like, then you"re probably better off looking elsewhere.

The Dell S2716DG came as a surprise and during our tests we were surprised as well, although not always in a positive way. The colour quality disappoints, the gamma is not the best and the black value is a bit substandard. Nevertheless, when compared with its main – and the only one we could test – competitor, the Asus PG278Q, we have to come to the conclusion that Dell only performs slightly worse in terms of brightness and contrast as well as colour- and grey deviation while having better viewing angles, similar colour temperature and similar response times. All of this, while the price is 46 pounds / 60 euros less, on average even more than 76 pounds / 100 euros.

In general, IPS, PLS, and VA panels will maintain outstanding image quality and low color degradation no matter where in the room you’re viewing from. A huge boon.

Remember the hype surrounding the final season of Game of Thrones? Now, do you remember the battle with the White Walkers? More specifically, howdark the episode was? If you couldn’t see very well, chances are you weren’t using a VA panel.

VA panels are known to deliver the deepest blacks and richest all-around tones, thanks to their high contrast ratios. This is also why they’re commonly found in television sets. That said, IPS panels come in close behind with contrast ratios of roughly 1000:1.

Due to the comparatively simple nature of TN liquid crystal technology, most TN displays boast low response times between 5ms and 1ms. This allows games to transition from scene-to-scene with very little lag and virtually zero ghosting.

TN panels also feature the highest refresh rates, which is how many times per second a display can re-render a scene (critical for reaching maximum FPS).

High response times and refresh rates are a huge boon for gaming, where split second decisions can make or break a game. As such, TN panels are the optimal choice for PC gamers looking to maximize their competitive advantage.

Given their inexpensive manufacturing costs, TN panels are the most affordable type on our list. In price-ascending order, they’re followed by VA panels, PLS panels, and IPS panels.

Do note, however, that different display models offer different features. High-end TN panels can easily cost more than an entry-level IPS. It depends on the specifications, manufacturer, and various other factors.

Choosing the best panel type ultimately comes down to personal needs and preference. That said, we hope these guidelines help. Your perfect display is out there.

Whether you’re seeking a VA vs IPS vs TN monitor, we’ve assembled this list of the web’s most frequently asked questions to offer an easy solution to all your display inquiries.

Liquid Crystal Display (LCD) screens are a staple in the digital display marketplace and are used in display applications across every industry. With every display application presenting a unique set of requirements, the selection of specialized LCDs has grown to meet these demands.

LCD screens can be grouped into three categories: TN (twisted nematic), IPS (in-plane switching), and VA (Vertical Alignment). Each of these screen types has its own unique qualities, almost all of them having to do with how images appear across the various screen types.

This technology consists of nematic liquid crystal sandwiched between two plates of glass. When power is applied to the electrodes, the liquid crystals twist 90°. TN (Twisted Nematic) LCDs are the most common LCD screen type. They offer full-color images, and moderate viewing angles.

TN LCDs maintain a dedicated user base despite other screen types growing in popularity due to some unique key features that TN display offer. For one,

TN TFTs remain very popular among competitive PC gaming communities, where accuracy and response rates can make the difference between winning and losing.

VA, also known as Multi-Domain Vertical Alignment (MVA) dislays offer features found in both TN and IPS screens. The Pixels in VA displays align vertically to the glass substrate when voltage is applied, allowing light to pass through.

Displays with VA screens deliver wide viewing angles, high contrast, and good color reproduction. They maintain high response rates similar to TN TFTs but may not reach the same sunlight readable brightness levels as comparable TN or IPS LCDs. VA displays are generally best for applications that need to be viewed from multiple angles, like digital signage in a commercial setting.

IPS (In-Plane Switching) technology improves image quality by acting on the liquid crystal inside the display screen. When voltage is applied, the crystals rotate parallel (or “in-plane”) rather than upright to allow light to pass through. This behavior results in several significant improvements to the image quality of these screens.

IPS is superior in contrast, brightness, viewing angles, and color representation compared to TN screens. Images on screen retain their quality without becoming washed out or distorted, no matter what angle they’re viewed from. Because of this, viewers have the flexibility to view content on the screen from almost anywhere rather than having to look at the display from a front-center position.

IPS displays offer a slightly lower refresh rate than TN displays. Remember that the time for pixels to go from inactive to active is measured in milliseconds. So for most users, the difference in refresh rates will go unnoticed.

Based on current trends, IPS and TN screen types will be expected to remain the dominant formats for some time. As human interface display technology advances and new product designs are developed, customers will likely choose IPS LCDs to replace the similarly priced TN LCDs for their new projects.

IPS (in-plane switching) is a screen technology for liquid-crystal displays (LCDs). In IPS, a layer of liquid crystals is sandwiched between two glass surfaces. The liquid crystal molecules are aligned parallel to those surfaces in predetermined directions (in-plane). The molecules are reoriented by an applied electric field, whilst remaining essentially parallel to the surfaces to produce an image. It was designed to solve the strong viewing angle dependence and low-quality color reproduction of the twisted nematic field effect (TN) matrix LCDs prevalent in the late 1980s.

The TN method was the only viable technology for active matrix TFT LCDs in the late 1980s and early 1990s. Early panels showed grayscale inversion from up to down,Vertical Alignment (VA)—that could resolve these weaknesses and were applied to large computer monitor panels.

Shortly thereafter, Hitachi of Japan filed patents to improve this technology. A leader in this field was Katsumi Kondo, who worked at the Hitachi Research Center.thin-film transistor array as a matrix and to avoid undesirable stray fields in between pixels.Super IPS). NEC and Hitachi became early manufacturers of active-matrix addressed LCDs based on the IPS technology. This is a milestone for implementing large-screen LCDs having acceptable visual performance for flat-panel computer monitors and television screens. In 1996, Samsung developed the optical patterning technique that enables multi-domain LCD. Multi-domain and in-plane switching subsequently remain the dominant LCD designs through 2006.

IPS technology is widely used in panels for TVs, tablet computers, and smartphones. In particular, most IBM products was marketed as CCFL backlighting, and all Apple Inc. products marketed with the label backlighting since 2010.

Most panels also support true 8-bit-per-channel colour. These improvements came at the cost of a lower response time, initially about 50 ms. IPS panels were also extremely expensive.

IPS has since been superseded by S-IPS (Super-IPS, Hitachi Ltd. in 1998), which has all the benefits of IPS technology with the addition of improved pixel refresh timing.

In this case, both linear polarizing filters P and A have their axes of transmission in the same direction. To obtain the 90 degree twisted nematic structure of the LC layer between the two glass plates without an applied electric field (OFF state), the inner surfaces of the glass plates are treated to align the bordering LC molecules at a right angle. This molecular structure is practically the same as in TN LCDs. However, the arrangement of the electrodes e1 and e2 is different. Because they are in the same plane and on a single glass plate, they generate an electric field essentially parallel to this plate. The diagram is not to scale: the LC layer is only a few micrometers thick and so is very small compared with the distance between the electrodes.

In practice, other schemes of implementation exist with a different structure of the LC molecules – for example without any twist in the OFF state. As both electrodes are on the same substrate, they take more space than TN matrix electrodes. This also reduces contrast and brightness.

Unlike TN LCDs, IPS panels do not lighten or show tailing when touched. This is important for touch-screen devices, such as smartphones and tablet computers.

Toward the end of 2010 Samsung Electronics introduced Super PLS (Plane-to-Line Switching) with the intent of providing an alternative to the popular IPS technology which is primarily manufactured by LG Display. It is an "IPS-type" panel technology, and is very similar in performance features, specs and characteristics to LG Display"s offering. Samsung adopted PLS panels instead of AMOLED panels, because in the past AMOLED panels had difficulties in realizing full HD resolution on mobile devices. PLS technology was Samsung"s wide-viewing angle LCD technology, similar to LG Display"s IPS technology.

In 2012 AU Optronics began investment in their own IPS-type technology, dubbed AHVA. This should not be confused with their long standing AMVA technology (which is a VA-type technology). Performance and specs remained very similar to LG Display"s IPS and Samsung"s PLS offerings. The first 144 Hz compatible IPS-type panels were produced in late 2014 (used first in early 2015) by AUO, beating Samsung and LG Display to providing high refresh rate IPS-type panels.

tech2 News Staff (19 May 2011). "LG Announces Super High Resolution AH-IPS Displays". Firstpost.com. Archived from the original on 11 December 2015. Retrieved 10 December 2015.

Baker, Simon (30 April 2011). "Panel Technologies: TN Film, MVA, PVA and IPS Explained". Tftcentral.co.uk. Archived from the original on 29 June 2017. Retrieved 13 January 2012.

Ivankov, Alex (1 September 2016). "Advantages and disadvantages of IPS screen technology". Version Daily. Archived from the original on 26 September 2017. Retrieved 25 September 2017.

"Samsung PLS improves on IPS displays like iPad"s, costs less". electronista.com. Archived from the original on 27 October 2012. Retrieved 30 October 2012.

Display technology has been evolving for more than a century and continues to drive innovations in the electronic device market. IPS technology was developed in the 90s to solve color and viewing angle issues.

IPS display panels deliver the best colors and viewing angles compared to other popular display planes, including VA (vertical alignment) and TN (twisted nematic).

LCDs (liquid crystal displays). IPS changes the behavior of an LCD’s liquid crystals to produce a sharper, more accurate picture. This technique allows IPS displays to deliver a higher quality viewing experience than other screen types like TN or VA.

IPS acts on the liquid crystals inside an LCD, so when voltage is applied, the crystals rotate parallel (or in-plane), allowing light to pass through them easily. By reducing the amount of interference in the light being produced by the display, the final image on the screen will be much clearer.

One of the leading advantages that IPS offer is its ability to deliver wide angles while preserving colors and contrast. This means you can view an IPS screen from nearly any angle and get an accurate representation of the image on-screen.

IPS display screens and monitors offer the best quality in different environments (direct sunlight, low light, indoors, or outdoors) compared to TNs or VAs.

IPS LCDs require about 15% more power than a standard TN LCD. OLED displays require much less power than IPS types due to the fact that they don’t require a backlight. The LCD IPS technology is not the ideal solution if you need an energy-efficient display. You’re better off choosing an OLED or TN TFT for a low-power solution.

Because of the newer and more advanced technology found in IPS displays, they’re more expensive to manufacture. For a more cost-effective solution, a TN LCD would be a better choice.

IPS displays provide a huge boost to viewing angles and color reproduction, but they don’t have the same contrast capabilities as some other competing display types. OLED displays are able to deliver true black by shutting off their active pixels completely, resulting in much higher contrast than IPS displays. If you’re looking for maximum contrast in your display, you’re better off with an OLED display.

Because of in-plane switching’s ability to boost viewing angles and retain color accuracy, it allows LCDs to compete with the high contrast images found on OLED displays.

If you don’t require the highest refresh rates and don’t mind slightly higher power consumption, then an IPS display will greatly benefit your project.

IPS, also known as In-Plane Switching, is a type of monitor display and screen technology that uses a voltage to control the alignment of liquid crystals, similar to TN technology. However, IPS displays use a different crystal orientation where the crystals are parallel to the glass substrates, hence the term ‘in-plane’. Rather than ‘twisting’ the crystals to modify the amount of light let through, IPS crystals are essentially rotated, which has a range of benefits. IPS displays offer the best color reproduction as well as the widest viewing angles compared to other LCD technologies.

While TN LCD’s support high refresh rates with low response times, they do come with sub-optimal viewing angles, and slightly diminished color reproduction. IPS panels address these downfalls with 80 degree viewing angles that eliminate color inversion and contrast diminishment. IPS technology is ideal for a wide array of applications such as medical, industrial, HVAC, Pool/Spa due to the ability to use the displays in both landscape and portrait mode while maintaining uniform viewing angles. This also allows for displays to be seen from different angles and heights, ideal for jacuzzi controls and thermostats that tend to require consideration of dynamic user parameters.

Due to the way brightness is controlled on LED backlights, a small number of people perceive flicker on their screen which causes eye fatigue. The FlexScan EV series utilizes a hybrid solution to regulate brightness and make flicker unperceivable without any drawbacks like compromising color stability.

The IPS (in-plane switching) panel has 178° viewing angles so it exhibits minimal change in contrast and hue when viewed from off center. This makes it ideal for trading rooms or other multi-monitor environments.

To prevent eye fatigue, a brightness sensor called Auto EcoView detects the changes in the ambient brightness that occur throughout the day and automatically adjusts the screen to the ideal brightness level. Auto EcoView cuts power by almost 40% compared to operating the monitor at maximum brightness.

In a dimly-lit work environment, a monitor with low brightness settings will be more comfortable to use. This monitor comes with an LED backlight that allows for adjusting the brightness to just 0.2% (about 0.6 cd/m2) of the maximum. With typical CCFL backlights the lowest you could adjust to would be a much brighter 20%.

Five preset modes (including two with user adjustable settings) ensure you always get the right setting for any application. You can switch modes at the touch of a button or automatically with the bundled ScreenManager Pro for LCD software.

Screen Size (full screen, enlarge, normal), Smoothing (5 stages), Border Intensity, Color Adjustment (Brightness, Contrast, Gamma, Temperature, Saturation, Hue, Gain, Overdrive, Reset), Signal Switching, Product Information (name, serial number, resolution, operating time, etc.), OSD Menu Settings, Adjustment Lock, DDC/CI Lock, Power Indicator, Reset

AC power cord, signal cables (DVI-D – DVI-D[dual link supported]), DisplayPort – DisplayPort), EIZO LCD Utility Disk (PDF user’s manual, ScreenManager Pro for LCD [DDC/CI], EIZO ScreenSlicer software), setup guide