s900 lcd display settings brands

I have a green bike usa EM26 THAT HAS A 750W REAR hub motor and a s900 display. There are 18 parameter settings on the display but the manual does not address 2 of them P08 and P17. I think these settings affect power and or speed because the bike does not perform like it should. I have emailed the company twice and they seem to be ignoring me. Can anyone help? Ps I do not know what controller is in it either.

When doing my research on what controller was ideal for my ebike, I thought, should I get a very simple controller or a more sophisticated but complex LCD display that can give me more riding features?

Even though you can see only six (6) main readings on the display, there is fourteen (14) usable functions you can access and adjust based on your needs.

Po2 – Km or miles per hour: depending on your location, you can select to display the speed in km (“0” ) or mph (“1”). For this to work properly, you need to set the size of your ebike wheels.

Po4 – Display sleep mode:this come from zero to 60 mins. In this case, zero means your controller will stay on all the time and if 60 mins, it will shut down after 1 hr of no operation (this will not happen if you are riding your electric bike though).

P06 – Wheel size selection: this is where you establish the size of your wheels in inchs. This is important in order to display the right speed you are traveling.

When something is not working well with your electric bike, the SW900 LCD can inform you about the issue or system errors. This is what you need to know:

I believe the SW900 LCD is one of the most functional controller for e-bikes in the market but from my perspective, if you don’t want to have to much of a headache, just stay away from it and install a most simple one, like the ones provided by Bosch.

5) Error code： “ERROR” and code when there is error 6) Assist level： actual assist level 0~5, 0 –no assist, 1- ECO, 2,3-STD， 4,5-POWER) Distance： Trip/ODO 6km mode 2. Press button definition LCD-S900 uses independent press button, in total three buttons:...

、 “UP”、 “MODE”、 “DOWN” “DOWN”。 3. Operation instructions Power ON/OFF （MODE When the power is off, Long press When the power is off, Long press MODE）during 3 seconds，screen will display all contents and start to normal will display all contents and start to normal will display all contents and start to normal working mode, and controller will be turned on working mode, and controller will be turned on...

： 1) P07-speed limit： short press to set the speed limit from 15 15 to 45Km/h. P11-Reset all parameters Reset all parameters： long press 5 seconds 5 seconds，when it displays “SSSS”，all parameters all parameters reset to default values(except for the ODO distance) reset to default values(except for the ODO distance) 5.

Every ECOTRIC electric bicycleon our websitecomes with a 18 monthswarranty against manufacturing defects in materials or workmanship on its frame, battery, motor, controller, and display.

Every ECOTRIC electric bicycleon our websitecomes with a 18 monthswarranty against manufacturing defects in materials or workmanship on its frame, battery, motor, controller, and display.

Actual colours of product may vary slightly, due to different device screen settings, the lighting conditions, slight differences in product finishes and other factors