s900 lcd display settings free sample

Color adjustment ... 38 Auto level ... 38 Advanced settings... 39 Custom settings ... 43 Miscellaneous ... 44 Using the S900 with Unimessage Pro... 45 Maintenance... 46 Cleaning the document glass... 46 ADF... 47 Cleaning the ADF... 47 Replacing the ADF Snap-in Pad Module ... 49 Troubleshooting...

Unlocking the scanning head... 67 Installing the ADF ... 68 Connecting the Cables... 70 Connecting the power and switching on ... 71 Setting up Additional Settings ... 72 Installing utilities from the CD-ROM ... 77 Oki Europe... 80 Index ... 83 CONTENTS > 5...

LCD display (1), arrow keys (2) and setting buttons (3) These are used to display the current settings and status information and to select certain modes of operation. Copy Count Use these buttons to enter your copy count (maximum 99). The button marked “C”...

Copy button and other controls/indicators Use the button (1) to switch into power saving mode. Hold down the button (2) for 5 seconds to clear current (user) settings and return to the factory default settings. The indicator LEDs have the following meanings when illuminated: The Power LED (3) indicates power on and ready status.

Select the settings for the scanning features (e.g., Sharpen, Descreen, etc.) that you want to use. Click on the Preview or Scan button to preview or scan your document(s). More details of the above steps follow. USING THE S900 AS A SCANNER > 28...

Place the mouse cursor over the line, click the left mouse button, and drag the line to set the curve you want. Adjusting the curve up (1) or down (2) turns the image brighter or darker respectively. USING THE S900 AS A SCANNER > 40...

Saturation—specify a value in the Saturation box to adjust the saturation level of the color. The level of saturation indicates whether the color is pale or rich. USING THE S900 AS A SCANNER > 41...

R channel (red) to remove the red text or red background. Increasing the brightness after removing one of the color channels will make the image clearer. This function is particularly useful when you have to convert text using OCR software. USING THE S900 AS A SCANNER > 42 NOTE...

Always confirm that ON-LINE is displayed on the operator panel LCD of the printer before switching on the S900. Action required name. Update the printer profile. (See Appendix C.) Check the S900 or reset the S900 if required. If the code still appears, contact your Oki dealer. CAUTION! TROUBLESHOOTING > 52...

Date Date of log on display Log No. Log number User ID The number entered when setting PIN ID for S900 (User ID 100000xxxx: First six digits from the left are fixed.) User "S900" fixed Document Name "Scanner Job" fixed...

Hold the ADF document cover (3) and insert its studs (4) into the hinge holes at the rear of the S900. Close the ADF cover and raise the ADF Tray (5) to an angle of about 45 degrees. Pull down the legs (6) under the ADF Tray and locate them in their support positions.

Multi-Purpose Tray: ON Duplex (only displayed when a Duplex unit is installed) Top Edge: With Top Edge set, printing is such that pages are bound on the top-edge, and the back of each page is printed in the opposite direction to the front. Left Edge: With Left Edge set, printing is such that pages are bound on the left-edge, and the back of each page is printed in the same direction as the front.

New Hardware Wizard to let Windows identify your new USB device before or after the driver installation.) (You can uninstall the S900 driver by selecting Start > Programs > S900 and clicking the Uninstall Driver icon from S900 group.) For copying and/or scanning and messaging Double-click on Install Update Tool and follow the on- screen instructions.

Saving custom settings ...43 Selecting image type ... 28 Selecting method ... 28 Selecting resolution ... 28 Sharpen image...38 Units of measure ...37 Using the TWAIN driver ...27 troubleshooting ...51 Unimessage Pro...45 Unlocking Scan head lock...67 Unpacking ADF...16 Scancopier...9 INDEX > 84...

1.Heartbeat price: Collaborative pricing strategy of motor, controller,throttle&brake lever&switch,LCD&LED display,PAS,front light,cutting extra cost and helping with get more profit margins for customers

Sample X can bring you accurately modeled vintage sampler emulation. You can Dial-in the sample rate, bit rate, aliasing, input drive, and filter settings to sound like any sampler, or design your own sampler from scratch and save it as Preset. Multiple sampler emulation presets already included in this ( SP1200, SP12, S612, S950, etc).

BITS CONTROL: Set the BIT Rate with this control. The range varies from the modern-day 24 bit right down to 4 bits! You can also “double click” the Bit Display LCD and manually enter the value that you desire.

SR CONTROL (Sample Rate): Set the BIT Rate with this control. The range varies from the modern-day 24 bit right down to 4 bits! You can also “double click” the Bit Display LCD and manually enter the value that you desire.

DRIVE (on/o? switch & control): In vintage samplers, users often “overloaded” the pre-amp before the A/D converter to get a “driven” sound. We have accurately emulated the sound found in the S900 sampler to give you the same saturation and Drive, and get even closer to the sound of those vintage beasts!

PRESETS: We have carefully matched various settings of SAMPLEX to sound just like the original samplers that we are emulating, some great presets are available here to get you started and also give you a taste of the sound of some vintage samplers that are now unavailable or very expensive to purchase.