qdtech 3.2 tft lcd touch screen in stock

-LCD control IC ILI9341, touch panel controller XPT2046; Adopt industrial TFT LCD modules; High-grade gold-plated double yellow-module pin, better electrical properties; -Compatible with all hot Atom development boards, straight into the straight; -Application is fully open source; -Bottom-driven technical support LCD, a transaction, is a friend forever;

-3.2 inch, 240*320 resolution, TFT touch screen; -Display driver IC ILI9341, touch screen driver for XPT2046; 16bit-display interface parallel interface, support for 6800 and 8080 bus interface supports STM32 FSMC bus interface, crowding the screen faster; -Touch screen interface for the SPI interface, so that the line less, driving is simple; -Onboard-a large current LDO voltage regulator, 5V and 3.3V power supply; -Onboard PWM backlight control circuit to support IO control and PWM dimming control; -Modules with SD cards, digital photo frames and other experiments can be done; -Reserved SPI FLASH pad, you can extend the welded fonts chips; -Supports landscape and portrait displays, support split the screen display; -Support for 262,000-color RGB display and displayed good quality; -Graphic display of the screen controller with internal 172800 byte data storage; Punctuality Atom-interface compatible series of interface Development Board; Patch-machine production, stable and reliable hardware;

-Module design principle; -LCD controller data manual; -XPT2046 data sheet; -Module schematic diagram; -Module dimensions; -LCD package; MOD software-text; -Picture taking mode software; -C51 code wiring tutorial; -STM32 code wiring tutorial;

Buy 3.2 inch Touchscreen LCD Screen Shield for Arduino Mega on sale online. Sydney Australia stock and Warranty with Fast Free Shipping from our Sydney Warehouse. Buy Now and Pay Later with ZipMoney. Now on Sale, Check our range online.

SainSmart 3.2" TFT LCD Displayis a LCD touch screen module. It has 40pins interface and SD card and Flash reader design. It is a powerful and mutilfunctional module for your project.The Screen include a controller SSD1289, it"s a support 8/16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051. It is designed with a touch controller in it . The touch IC is ADS7843 , and touch interface is included in the 40 pins breakout. It is the version of product only with touch screen and touch controller.

※ Price Increase NotificationThe TFT glass cell makers such as Tianma,Hanstar,BOE,Innolux has reduced or stopped the production of small and medium-sized tft glass cell from August-2020 due to the low profit and focus on the size of LCD TV,Tablet PC and Smart Phone .It results the glass cell price in the market is extremely high,and the same situation happens in IC industry.We deeply regret that rapidly rising costs for glass cell and controller IC necessitate our raising the price of tft display.We have made every attempt to avoid the increase, we could accept no profit from the beginning,but the price is going up frequently ,we"re now losing a lot of money. We have no choice if we want to survive. There is no certain answer for when the price would go back to the normal.We guess it will take at least 6 months until these glass cell and semiconductor manufacturing companies recover the production schedule. (Mar-03-2021)

ER-TFT032-2 is 240x320 dots 3.2 " color tft lcd module display with ILI9320 controller and optional 4-wire resistive touch panel,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 16-bit parallel interface. .FPC is soldering type,there is no need for zif connector.Lanscape mode is also available.

The RPi LCD can be driven in two ways: Method 1. install driver to your Raspbian OS. Method 2. use the Ready-to-use image file of which LCD driver was pre-installed.

3) Connect the TF card to the Raspberry Pi, start the Raspberry Pi. The LCD will display after booting up, and then log in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installing, or log in remotely with SSH)

1. Executing apt-get upgrade will cause the LCD to fail to work properly. In this case, you need to edit the config.txt file in the SD card and delete this sentence: dtoverlay=ads7846.

This LCD can be calibrated through the xinput-calibrator program. Note: The Raspberry Pi must be connected to the network, or else the program won"t be successfully installed.