pentair easy touch lcd screen factory

But, on the ET controller shown below you can see the header that connects the LCD to the main board... in a response above I suggested cutting the header pins, but there"s an easier way that doesn"t destroy the header...

You can heat the header pin between the two boards, as close to the LCD as you can, and then use the pump on the top of the LCD solder joint to suck out the solder. This allows you to heat and pump simultaneously... as soon as the solder melts you hit the pump plunger.

The EasyTouch Control System eliminates the inconvenience of trips to your pool equipment pad, memorizing operating sequences, opening and closing valves and resetting time clocks and thermostats. With push-button operation and clear, intuitive instructions and displays, your EasyTouch system includes all circuitry and fully programmable controls in a single Load Center installed near your pool or spa equipment. This avoids expensive wiring and installation costs to make an EasyTouch system affordable for any budget.

This is a Pentair EasyTouch 8 EC Pool Single Control Base System with Intellichlor transformer built in and one IC40 cell. The EasyTouch automated systems with Intellichlor allow you to control the operation of your salt water pool and spa equipment with the touch of a button. Packed with features, the EasyTouch 8 system has UltraTemp Heat Pump Integration, supports two VS or VF pumps (IntelliFlo), supports 8 feature circuits, support for IntelliBrite lights, and more. Some built-in diagnostics include automatic verification of the display, microprocessor, switches, indicators, and communication ports as well as a diagnostic screen that reports failures so you can troubleshoot or make repairs. Simple and easy to use, the EasyTouch 8-function system allows automated controls and scheduling of your pool equipment from the self-contained load center or optional remotes.

The EasyTouch 8 system includes all circuitry and fully programmable controls in a single Load Center unit which can be installed near your pool or spa equipment. It also includes one IC40 cell for salt water sanitation of pools up to 40,000 gallons. For added convenience, wireless remote control devices can be added to any EasyTouch system. The EasyTouch system has a wide array of accessories to add to your pool automation experience.

With the EasyTouch 8 system, scheduling and controlling the operation of your pool and spa equipment is a breeze. Pentair EasyTouch systems set the standard for operating simplicity with push-button operation and clear, intuitive instructions and displays. There is no need to memorize operating sequences, open and close valves, or reset time clocks and thermostats. The EasyTouch family offers even more features, options and technology and also is one of the simplest programs to operate.