camos digital tft lcd color monitor factory

CM-709M2 7” 4CHANNEL DIGITAL MONITOR INSTRUCTION MANUAL Thank you for purchasing this product. For proper usages and application, Please read this instruction manual thoroughly.

CHANGE SPLIT MODE MODE DOWN/UP MENU POWER Each split screen has two options. On split mode, press DOWN/UP button of monitor or split screen button of remote control then the screen switches between both options. 2 SPLIT 3 SPLIT 4 SPLIT 2 SPLIT 3 SPLIT H 4 SPLIT...

2) AV mode MODE DOWN/UP MENU POWER On camera mode, press AV button of monitor or remote control then the screen goes to AV mode directly. AUX1 AUX2 3) SPLIT mode MODE DOWN/UP MENU POWER To choose the OSD MENU [SETUP] on each split mode, press menu button of moni- tor or SETUP button of remote control.

SCREEN SWITCH WHILE TRIGGER INPUT or is when a circuit works by a signal, for example if driver uses right/left turn signal or reverse gear, the monitor shows connected camera on driving mode. ※ Below example is based on {TRG1 (Left turn signal)=CAM1 / TRG2 (Right turn signal)=CAM2 / TRG3 (Reverse gear)=CAM3 / TRG4 (Front or something else)=CAM4 }.

3) When there is the TRG3(Rear light) input, CAM3 will be shown as full screen and user can also choose 2 split screen. ※ This function is available for rear and side screen. CAM1 CAM3 CAM3 Press ▼button of remote control (or DOWN button of monitor), then it shows 2 split screen as right for CAM3 (Rear) and left...

5) When there is an input signal of more than 2 triggers, the monitor displays fully connected screen (Trigger input screen) as the priority order. And the screen switsches back when the signal switsches off, the rest will be displayed as the priority order ※...

Brightness and contrast setting User can control BRIGHT/CONTRAST/COLOR/HUE/SATUREATION. ※ Each menu is set 50 from the factory. MODE DOWN/UP MENU POWER 1) Press SETUP button of remote control PICTURE SETUP (or MENU button of monitor) to go into DIMMER AUTO OSD MENU [PICTURE SETUP].

Initialization ※ It initializes monitor as from the factory mode. (Except on Video Standard System, NTSC/PAL) MODE DOWN/UP MENU POWER 1) Press SETUP button remote PICTURE SETUP control(or MENU button of monitor) DIMMER AUTO to go into OSD MENU [PICTURE BRIGHT SETUP].

Screen Information MODE DOWN/UP MENU POWER Press MODE button of monitor or RECALL button of remote control, then it displays actual screen information (Input mode / Audio output / Volume). CAM1 CAM2 CAM3 CAM4 VOLUME CAMERA Mirror/Normal mode setting MODE DOWN/UP MENU POWER 1) Press SETUP button of remote control (or MENU button of monitor) to go into...

MENU • It is a function to select MAIN MENU (SETUP/PICTURE/CAMERA) 1) Press [MENU] button to select MAIN MENU, changed color in red when it is selected. SETUP PICTURE CAMERA 2) Press [MODE] button to select SUB MENU, UP/DOWN button to change SUB MENU. DIMMER CONTRAST LANGUAGE...

• DISPLAY WIDE NORMAL CINEMA FULL • MARKER (1) Press MENU button on CAM1, full screen mode. (2) Press MODE button and select MARKER. (3) Then, press [DOWN/UP] button on the monitor DIMMER or [◀▶] button on the remote control, select LANGUAGE ENGLISH DIRECTION...

(2) Press MODE button and select H / V. (H: horizontal / V: vertical ) ress [DOWN/UP] button on the monitor or [◀▶] button on the remote control, and switch marker pattern. (H = -10~+10, V= -12~+12, Default setting: H=0, V=0) (4) After 10 seconds, set up screen disappears, and set up finishes.

[ 2. PICTURE USER ] 1) [MODE] button to select CONTRAST, BRIGHTNESS, COLOR, TINT MENU. (Selected menu in red) 2) Push [UP/DOWN] button to change the settings of the diferent menu points. CONTRAST CONTRAST BRIGHTNESS BRIGHTNESS COLOR COLOR TINT TINT CONTRAST CONTRAST BRIGHTNESS...

AUTOPIC • When press the AUTO PIC button, PICTURE SETUP menu is displayed on screen. CONTRAST BRIGHTNESS COLOR TINT MUTE • This function can be operated by the remote control. 1) Press [MUTE] button to mute sound and display mute icon. RECALL CAM1 VOLUME...