4 bracket for voyager lcd monitors manufacturer

The WVSXS70 single-camera system includes a 7-inch wireless LCD monitor, wireless rear camera, 12-volt accessory plug, suction cup monitor mount, non-corrosive camera mounting bracket, and stainless steel hardware.

Are you having trouble keeping your monitor in an easy-to-see position? Did your monitor come with a flimsy adhesive that has worn out, causing your monitor to sag and fall? RecPro may have the solution for you in the form of our fantastic universal pedestal mount, available in 4” or 6” sizes.

When you are traveling in or with a big rig, visibility is of the utmost importance. The last thing you want is for your monitor displaying your cameras, TPMS, or other information to shift or fall as you are driving. It would help if you had a mount that can keep your monitor securely in position without the risk of falling or shifting around from driving. This universal pedestal mount can do just that!

This universal pedestal mount is designed to hold your monitor firmly in place. It uses a 4-hole mounting pattern on the base to connect to the dash or other mounting area. A 4-hole mounting pattern is also used to mount your monitor to the pedestal. Mounting screws and installation hardware are not included with this product.

This Universal Pedestal Mount does not require any tools for adjusting the mounting position of your monitor. It features easy-to-use twist knobs that allow you to tighten or loosen the joints of the mounting pedestal by hand, helping you get your monitor in the perfect position with ease. This durable universal mounting pedestal is constructed from tough aluminum metal and is compatible with all Voyager rear view LCD monitors. With its ease of use and lovely matte black finish, this product is sure to make an excellent addition to your rig!

The Voyager Universal Pedestal Mount uses a 4 hole mounting pattern that will work with all Voyager rear view LCD monitors. The double knuckle design allows you to adjust the mount to give you the best viewing angle possible. Extends up to 6" vertically. Built from a solid cast of aluminum to provide more durability, and keeping it lightweight. Color: Matte Black Finish.

Voyager VOS7MDcL2B Toughcam 2-camera Observation System, Toughcam 7 LcD Observation Monitor, 2 Toughcam cMOS camera, VOSHD4MNT 4 LcD Monitor Mount, 2 cEc25 25 cable and cEc75 75 cable The Toughcam is the premium Heavy Duty observation system that comes complete with everything youll need to get your job done. Both the monitor and the camera run off of 12 Volt Dc power for trouble-free application for all your Heavy Duty needs. Key Features Toughcam? 7

LcD Observation Monitor: 7 Wide format high performance color LcD panel Energy Efficient White LED Backlighting Back-lit controls Integrated audio speaker NTSc and PAL video signal compatible Three camera (A/V) inputs Manual (push button) or automatic (trigger) source selection Auto power on (standby) Auto/manual day/night brightness modes OSD Programmable source name OSD Programmable distance markers Non-volatile memory for picture and volume adjustment settings Anti-glare/anti-scratch protective lens Removable sun-visor included Multiple mounting options (2) Toughcam? High

Performance cMOS camera: High performance color optics Waterproof (IP69K) cMOS technology IR low-light assist Microphone corrosion resistant (ASTM B117) VOSHD4MNT 4 LcD

Monitor Mount: Solid cast/machined aluminum Thumbscrew adjustable knuckle at midpoint Universal 4-hole mounting pattern mates with all Voyager LcD observation monitors (2) cEc25 25 cable: 25 cable can be daisy chained together Non-corrosive locking connectors with 4-pin round plug cEc75 75 cable: 75 cable can be daisy chained together Non-corrosive locking connectors with 4-pin round plug

The ToughCam is the premium Heavy Duty observation system that comes complete with everything you"ll need to get your job done. This is the one camera system which includes a monitor, a mount for the monitor, one camera and 25-foot and 75-foot camera cables to help users eliminate blind spots, relieve back and neck pain and increase productivity on the job. Both the monitor and the camera run off of 12 Volt DC power for trouble-free application for all your Heavy Duty needs

The ToughCam is the premium Heavy Duty observation system that comes complete with everything you"ll need to get your jobs done. This two camera system includes a monitor, mount for the monitor, two cameras and two 25-foot and one 75-foot camera cables to help users eliminate blind spots, relieve back and neck pain and increase productivity on the job. Both the monitor and the camera run off of 12 Volt DC power for trouble-free application for all your Heavy Duty needs.

Are you unable to see all of your surroundings while in your vehicle? The ToughCam 2-Camera Quadview Observation System is the ideal solution for eliminating those dangerous blind spots often encountered on the road or in the field. This system features a 7" wide view LCD monitor with Single/Split/Quad display modes to offer a variety of different viewing angles. The system also has two wide angle super CMOS color cameras that feature high performance optics along with excellent low light and high bright performance. This system reduces neck and back strain by eliminate the constant need to turn around and view the equipment and improves productivity on the job.

ToughCam 7" Digital Wireless Observation System featuring WiSight™ technology far exceeds the performance of any analog wireless observation system on the market. WiSight™ technology digitally locks the Voyager® camera to its monitor so it only communicates with that monitor, ignoring outside signals and eliminating interference. WiSight™ technology is strong enough to travel through and around objects and works on vehicles 60+ feet in length, a significantly longer distance than wireless analog systems. WiSight™ technology delivers a sharp, vivid picture of the vehicle’s surroundings to the 7” color LCD monitor. A suction cup mount and 12-volt DC power plug for the monitor make this system easily portable among towing vehicles. The camera is connected to the taillights or running lights.

Purchase below any of our TOUGHCAM KITs and get a extra same camera for$100.00 OFF. Final price includes extra camera at $159.99 and $199.99 for the WVOS7MDCL1B version

What does it take to make a toughcam? It takes a company dedicated to building a video system designed to operate in harsh conditions and give a exceptional service to boot. This is exactly what the line of video products manufactured by ASA Electronics. Here you will shop for just that. Cameras and monitors built to work on your backhoe, skid steer, excavator or any construction or commercial vehicle that fits the ridged environment. Get your best price with a kit.

Have a vehicle that is prewired for a Voyager Wisight ®? If so this is perfect for you! On the back of yourTrailer or RV there is a pre-installedVoyager Wisighthousing , our system will install in a matter of mintues with our bracket adapter. Simply snap the camera to the bracket in the back and plug it in, thats all there is to it.

No drilling just snap in the camera and plug in the wire. For the monitor just plug it into your cigarette adapter or wire it to any 12V. You will be up and running with your new color and nightvision camera in no time! Also, the system is an observation system, so you can use it for driving down the road and changing lanes as well as reversing and parking. The monitor also allows up to 4 cameras which means you can expand this system at any time in the future by purchasing more cameras. You would then be able to split the screen and see more than 1 camera at a time if you choose to do so.

This system includes a 7 inch screen that is upgradable to 9 inches and you can also upgrade the monitor so that it will split 2 cameras as well. The reason we call this systems “Built in” is because they have their digital transmitters built directly into the backup camera and rearview monitor this saves space and allows for better results.

We also include a FREE cigarette adapter for your rear view screen which will make it even easier to install, we also suggest purchasing the suction cup accessory (Located on the right of the page) for an even simpler installation experience but the dash mount that is included is very durable and easy to mount.

One last option we would like for you to consider istheaudio upgrade, this will allow 1 way communication from the backup camera to the rear view monitor, it is something that we only recently were able to bring to the market and we know that it will make backing up even safer for those behind you.

Complete System ready to go, everything you need in one box. System includes: 7" LCD monitor (AOM713WP) rear camera (VCCS150B) color camera), adapter cable (CEC25 (2 included)) and monitor mount (72704 mount)