4 bracket for voyager lcd monitors in stock

The WVSXS70 single-camera system includes a 7-inch wireless LCD monitor, wireless rear camera, 12-volt accessory plug, suction cup monitor mount, non-corrosive camera mounting bracket, and stainless steel hardware.

The WVSXS70 single-camera system includes a 7-inch wireless LCD monitor, wireless rear camera, 12-volt accessory plug, suction cup monitor mount, non-corrosive camera mounting bracket, and stainless steel hardware.

The Voyager Universal Pedestal Mount uses a 4 hole mounting pattern that will work with all Voyager rear view LCD monitors. The double knuckle design allows you to adjust the mount to give you the best viewing angle possible. Extends up to 6" vertically. Built from a solid cast of aluminum to provide more durability, and keeping it lightweight. Color: Matte Black Finish.

Voyager VOS7MDcL2B Toughcam 2-camera Observation System, Toughcam 7 LcD Observation Monitor, 2 Toughcam cMOS camera, VOSHD4MNT 4 LcD Monitor Mount, 2 cEc25 25 cable and cEc75 75 cable The Toughcam is the premium Heavy Duty observation system that comes complete with everything youll need to get your job done. Both the monitor and the camera run off of 12 Volt Dc power for trouble-free application for all your Heavy Duty needs. Key Features Toughcam? 7

LcD Observation Monitor: 7 Wide format high performance color LcD panel Energy Efficient White LED Backlighting Back-lit controls Integrated audio speaker NTSc and PAL video signal compatible Three camera (A/V) inputs Manual (push button) or automatic (trigger) source selection Auto power on (standby) Auto/manual day/night brightness modes OSD Programmable source name OSD Programmable distance markers Non-volatile memory for picture and volume adjustment settings Anti-glare/anti-scratch protective lens Removable sun-visor included Multiple mounting options (2) Toughcam? High

Performance cMOS camera: High performance color optics Waterproof (IP69K) cMOS technology IR low-light assist Microphone corrosion resistant (ASTM B117) VOSHD4MNT 4 LcD

Monitor Mount: Solid cast/machined aluminum Thumbscrew adjustable knuckle at midpoint Universal 4-hole mounting pattern mates with all Voyager LcD observation monitors (2) cEc25 25 cable: 25 cable can be daisy chained together Non-corrosive locking connectors with 4-pin round plug cEc75 75 cable: 75 cable can be daisy chained together Non-corrosive locking connectors with 4-pin round plug

Complete System ready to go, everything you need in one box. System includes: 7" LCD monitor (AOM713WP) rear camera (VCCS150B) color camera), adapter cable (CEC25 (2 included)) and monitor mount (72704 mount)

Have an old Voyager System? Then you have come to the right place! If your old Voyager Monitor or Voyager Camera went out this package is perfect for you. We supply a replacment Monitor that comes with a in dash insert trim, if your older Weldex monitor is in your dash this will make sure it fits the hole. The monitor also comes with an adapter to directly connect to your old wiring so its a very quick and easy swap!

Our backup camera replacement will also fit in the same spot as the old Voyager Camera. It also comes with an adapter so there is NO wiring at all. The swap should be done in a matter of minutes with the SAME wiring you currently have.

This system will also have color and nightvision (still using your old cable). You can also upgrade your newly installed system with options such as high definition or parking distance lines for example. You can also upgrade the monitor to allow more cameras so you can connect side cameras to this system. Those cameras can be wired or wirless its up to you.

If you are just in need of a replacement Voyager Camera or just a Voyager Monitor we sell our cameras and monitors with adapters on their own as well. Just give us a call we can help with this. Most people opt to simply replace both as the quailty vastly improves.

Are you having trouble keeping your monitor in an easy-to-see position? Did your monitor come with a flimsy adhesive that has worn out, causing your monitor to sag and fall? RecPro may have the solution for you in the form of our fantastic universal pedestal mount, available in 4” or 6” sizes.

When you are traveling in or with a big rig, visibility is of the utmost importance. The last thing you want is for your monitor displaying your cameras, TPMS, or other information to shift or fall as you are driving. It would help if you had a mount that can keep your monitor securely in position without the risk of falling or shifting around from driving. This universal pedestal mount can do just that!

This universal pedestal mount is designed to hold your monitor firmly in place. It uses a 4-hole mounting pattern on the base to connect to the dash or other mounting area. A 4-hole mounting pattern is also used to mount your monitor to the pedestal. Mounting screws and installation hardware are not included with this product.

This Universal Pedestal Mount does not require any tools for adjusting the mounting position of your monitor. It features easy-to-use twist knobs that allow you to tighten or loosen the joints of the mounting pedestal by hand, helping you get your monitor in the perfect position with ease. This durable universal mounting pedestal is constructed from tough aluminum metal and is compatible with all Voyager rear view LCD monitors. With its ease of use and lovely matte black finish, this product is sure to make an excellent addition to your rig!

This 4" universal pedestal mount Is the ideal choice for use with a Jensen Voyager rear view LCD monitor (sold separately) with its 4-hole mounting pattern.