beaglebone lcd display supplier

And here"s the repo with the dts file along with some notes on how to get it working with that image: https://github.com/JamesHagerman/4D-7in-LCD-Cape-Fixes-for-3.12

Green LCD Cape with Resistive Touch is designed for SeeedStudio Beagle bone® Green or Beagle bone Black with a compact 5-inch LCD which is smaller than a 7-inch one but provides a resolution of 800x480 using a layer of 4-wired resistive touchscreen for user interactions. It"s easy to setup by just connecting 2x46 pin headers to SeeedStudioBeaglebone®Green/Beaglebone®Black, which provides everything the cape requires such power supply and display signals. In addition, the cape can be powered by the built-in micro USB on the back. Buttons below the screen, LEFT, RIGHT, UP, DOWN and ENTER, provide an alternative way to interact with your screen. Two LEDs are used for power and user status indication.

NHD-7.0CTP-CAPE-N | BeagleBone Black Cape with TFT Display | 7.0" Sunlight Readable LCD | Capacitive Touchscreen | EEPROM with On-Board Dip Switches | Developing with Android & Linux

Engineered in Elgin IL USA, we designed this BeagleBone Cape to be a perfect fit for our 7.0” TFT displays and upgraded it with the sunlight readable NHD-7.0-800480EF-ASXN#-CTP display model. With capacitive 5-point multi-touch functionality and 800x480 resolution screen, this cape works seamlessly while developing with operating systems like Android and Linux. It includes an on-board dip switch for configuring EEPROM and secondary headers for additional cape connections. In addition to the secondary cape slot, we added four 3.5mm mounting holes that are compatible with standard M3 screws, a reset button, write protection pins, PWM backlight control, and an LED power indicator. With this cape we’ve made it easy to take your design process from concept to reality. When paired with the BeagleBone Black board (sold separately by beagleboard.org) you’ll have everything you need to plug-in and start developing.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Equip your display with a custom cut cover glass to improve durability. Choose from a variety of cover glass thicknesses and get optical bonding to protect against moisture and debris.

The 4D 4.3” LCD CAPE is a cape specifically designed for the Beagle Bone Black (BBB), and provides a 4.3” display for the BBB for direct user interaction and information display.

The 4D 4.3” LCD CAPE features 7 push buttons below the screen, LEFT, RIGHT, UP, DOWN, ENTER, RESET and POWER, along with 2 LED’s to indicate Power and User Status (normally heartbeat).

This 7" touchscreen cape creates a fully integrated system when combined with your BeagleBone Black. Provides full Angstrom support for easy BeagleBone prototyping and projects. A secondary set of header pins gives built-in stacking cape-ability.

The 4DCAPE-43 is specifically designed for the Beagle Bone Black (BBB), which provides a 4.3” display for the BBB for direct user interaction and information display. Available in both touch (4DCAPE-43T) and non-touch (4DCAPE-43), the CAPE conveniently features a 4.3” TFT LCD 480x272 resolution display and seven push buttons.

The Beagle Bone Black connects directly to the back of the 4DCAPE-43, and provides everything the CAPE requires such as power and display signals. It also includes 4 mounting holes for easy panel/enclosure mounting.

Please note that the 4DCAPE-43 is designed to be the primary display for Beagle Bone Black only and cannot be programmed using 4D Systems" Workshop 4 IDE.

The 4DCAPE-43 is specifically designed for the Beagle Bone Black (BBB), which provides a 4.3” display for the BBB for direct user interaction and information display. Available in both touch (4DCAPE-43T) and non-touch (4DCAPE-43), the CAPE conveniently features a 4.3” TFT LCD 480x272 resolution display and seven push buttons.

The Beagle Bone Black connects directly to the back of the 4DCAPE-43, and provides everything the CAPE requires such as power and display signals. It also includes 4 mounting holes for easy panel/enclosure mounting.

Please note that the 4DCAPE-43 is designed to be the primary display for Beagle Bone Black only and cannot be programmed using 4D Systems" Workshop 4 IDE.