beaglebone lcd display in stock

And here"s the repo with the dts file along with some notes on how to get it working with that image: https://github.com/JamesHagerman/4D-7in-LCD-Cape-Fixes-for-3.12

4.3 Inch Touch LCD Cape for BeagleBone Black is a complete display solution for BeagleBone Black. The package includes 4.3" Display, BeagleBone compatible cape with display interface, USB to TTL cable with PL2303, 5V 2A Power adapter, USB Type A to mini B cable, 40 pin FFC cable for display and a pack of screws.

The 4D 7.0" LCD CAPE which features a 7.0" TFT LCD 800x480 resolution display,is a cape specifically designed for the Beagle Bone Black (BBB). It provides a 7.0" primary display for the BBB for direct user interaction and information display, along with the ability for additional CAPES to be attached at the same time.

The BBB connects directly to the back of the 4DCAPE-70T, and allows everything the CAPE requires such as power and display signals. Another CAPE can be added to the secondary connectors on the back of the module if required.

The 4D 7.0" LCD CAPE features 7 push buttons below the screen, LEFT, RIGHT, UP, DOWN, ENTER, RESET and POWER, along with 2 LED’s to indicate Power and User Status (normally heartbeat).

Please note that the 4DCAPE-70T is designed to be the primary display for Beagle Bone Black only and cannot be programmed using 4D Systems Workshop 4 IDE

The 4D 4.3” LCD CAPE is a cape specifically designed for the Beagle Bone Black (BBB), and provides a 4.3” display for the BBB for direct user interaction and information display.

The 4D 4.3” LCD CAPE features 7 push buttons below the screen, LEFT, RIGHT, UP, DOWN, ENTER, RESET and POWER, along with 2 LED’s to indicate Power and User Status (normally heartbeat).

The 4DCAPE-43 is specifically designed for the Beagle Bone Black (BBB), which provides a 4.3� display for the BBB for direct user interaction and information display. Available in both touch (4DCAPE-43T) and non-touch (4DCAPE-43), the CAPE conveniently features a 4.3� TFT LCD 480x272 resolution display and seven push buttons. � The Beagle Bone Black connects directly to the back of the 4DCAPE-43, and provides everything the CAPE requires such as power and display signals. It also includes 4 mounting holes for easy panel/enclosure mounting. � Please note that the 4DCAPE-43 is designed to be the primary display for Beagle Bone Black only and cannot be programmed using�4D Systems" Workshop 4 IDE. � Features 4.3�� TFT LCD Display, 480x272 Resolution 7 push buttons, including LEFT, RIGHT, UP, DOWN, ENTER, RESET and POWER 2 LED�s, one to indicate Power and one for User, which could be configured as required Fully compatible with existing drivers already written for the Beagle Bone. 4DCAPE-43T (Resistive Touch version) 3.5mm mounting holes, enabling standard M3 screws/bolts to fasten the display to an enclosure, panel or an alternative mounting solution Powered directly from the BeagleBone Black, no additional power required � Documents 4DCAPE-43 Datasheet 4DCAPE-43 3D PDF 4DCAPE-43 STEP Model 4DCAPE-43 STEP Model(This is designed for CAD, not a simple STEP viewer) 4DCAPE-43 Mechanical Drawing � Related Links Beagleboard Website Latest Version of Angstrom 4D System Website

This 7" touchscreen cape creates a fully integrated system when combined with your BeagleBone Black. Provides full Angstrom support for easy BeagleBone prototyping and projects. A secondary set of header pins gives built-in stacking cape-ability.