lcd panel connector repair factory

So, a while back the hinges on my laptop broke. I ignored the problem and kept it open to not disturb any of the wires bridging the hinges. Long story short, the LCD finally hit the dust (damage to some of the ribbon cables and WiFi wires).

I ordered an entire 1600x900 factory replacement monitor (casing, webcam, LCD, etc) and took "er apart and plugged it up, but there is nothing posting to the new monitor. note: the laptop WILL output both HDMI and rbg to an external monitor.

Anyways, as far as I can tell and multiple passovers, there is nothing damaged on the board. I"ve taken it apart and checked multiple times to the best of my ability, reseating the LCD connection to the motherboard and internally on the new display..

Heat, vibration and 20+ years of aging causes significant wear on the factory LCD connector. Spring terminals weaken, wires break and oxidation pits the surface of the terminals. Eventually the contacts become open and LCD operation becomes intermittent, or the LCD stops working entirely

For example: for Dell U2415 monitor the factory installed display panel is 24.0" LM240WUA-SSA1 manufactured by LG Display, which supports 1920(RGB)×1200 (WUXGA) display and has WLED backlight incorporated (no LED driver is present in the panel). The signal interface is LVDS (2 ch, 8-bit), a single 30-pins connector. There are other matching panels made by LG, Samsung, AUO and possibly others (abundantly available from 3rd party resellers), but the most important is that the mainboard LVDS connector signals mapping do match the LVDS panel specifications - as found in the panel datasheet.

buy a used display panel, or a used monitor with similar size and resolution (checking first the monitor model specifications / resolution / backlight type / panel make, model, datasheet).

The replacement job will require disassembly, and one should carefully observe the steps in the video tutorials other users have created and posted on Internet. Or even better, leave it to a licensed repairer or somebody who has proven practical experience and knows how to avoid risk of electrical shock, ESD damage to the electronic components or the display panel - and can offer warranty for their work. Pay extra care with the cables connecting the mainboard to the display (LVDS, LED backlight and menu button board) as they can be easily damaged when removing the mainboard.

I am an IT guy who discovered repairing electronics by need - when looking to fix the hardware related problems I encountered with monitors, laptops, computers, networking, printing, audio-video and so.

I found that working with resources disposed for recycling is a very efficient way to learn, and solve many problems without big expenses. I agree that the cost of repair at specialized centres could bear a high cost - considering that fixing requires time, experience and somehow be lucrative. But younger generations tend to break technological barriers easier, and with the help of readily available information consumers can solve problems themselves when manufacturers can"t.

In Union Repair store, we grade our iPhone screen into 5 different types of quality on the basis of different material assembled. The following is the full details of each condition.

It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.

It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.

The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality.

It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F.

Once done, the next step is to prepare tools and materials in the picture in advance for removing the problem flex cables and laminating the new flex cables on the LCD.

That’s all. Don’t you think that it is easy for you to operate? We think that this machine would be one of your excellent helpers for the mobile phone repair.

HP recommends that you only order parts from an authorized HP repair parts dealer. Parts ordered from third-party companies might not perform as expected and might cause additional

LCD Display & Digitizer Assembly Test Flex Cable for Samsung Galaxy Note 2 http://www.ogodeal.com/lcd-display-digitizer-assembly-test-flex-cable-for-samsung-galaxy-note-2.html

This article was co-authored by Linh Le and by wikiHow staff writer, Nicole Levine, MFA. Linh Le is a Certified Mobile Repair Specialist and the Owner of SC Mobile Repairs in San Clemente, California. With more than 12 years of experience, he specializes in smartphone, tablet, and smartwatch hardware repair. Linh has an iTech Mobile Device Repair Certification and an iOS Certification. He holds a Bachelor’s degree from The Franciscan University of Steubenville.

If you’re still staring at a blank screen, it’s possible that the cable connecting the logic board to the LCD screen has become disconnected. This can occur if you accidentally drop your phone a few times. In order to regain your screen’s functionality, the cable will need to be plugged back in.

If you want to repair a broken iPhone or Android this way, it’s best to seek help from a professional. While you may find DIY instructions online, you could risk causing irreparable damage to your device if you don’t know what you’re doing. So, if you suspect that your phone’s LCD cable is disconnected, search for a place in Las Vegas that fixes phones.

Sometimes a power button can get stuck due to trapped gunk, debris, or sticky food. You can try to dislodge debris by pressing the button rapidly several times. In most cases, the most effective method for sticky buttons is applying a Q-tip with rubbing alcohol. Swab the area around the button to loosen up and extract dirt, dust, or whatever might be trapped in there. In some instances, you may have a broken button that will need to be repaired.

If you’re in need of smartphone repair, NerdsToGo can help. Our expert team understands the inner workings of a wide variety of devices. We’ll determine the root of the problem to get your phone up and running again as quickly as possible. And, if you don’t have time to visit our storefront for your smartphone repairs, we’ll come to you!

If your car or truck factory radio LCD with touchscreen monitor needs replaced then we provide some of the best replacement car touch LCD screen replacement parts available on the market today. As is Factory Radio Parts standard: all of our car touchscreen repair kits are developed for both ease of use and functionality – so you can get your tunes blasting again in no time!

Car touchscreen damaged? Car radio or car DVD player not working? Let us provide you with 8.4” touchscreen parts, VP3 and VP4 radio replacement touch screens, MyFord touch sync 2 radio screens, RB5 RE2 radio replacement screens from Uconnect, 439 RBZ, 430N and 730N touch screen repairs and 7 inch screens. We supply big names like Ford Lincoln Clarion Navigation replacement parts, Toyota Tundra Panasonic touch screen fixes, RAM Truck, Chevrolet, Cadillac and more!

Replacement equipment that Apple provides as part of the repair or replacement service may contain new or previously used genuine Apple parts that have been tested and pass Apple functional requirements.

This doesn’t necessarily mean that there is an issue with the motherboard. If your laptop keeps turning off every few minutes and doesn’t turn on, there is a high chance that the AC adapter has malfunctioned. You can get help from a professional to confirm and get the AC adapter replaced, if required. There is also a possibility that the DC power jack may have broken. A DC connector (or DC plug) is an electrical connector that supplies steady power to the device.

If the DC jack has broken, you can try adjusting the plug’s angle in its jack. If you see some lights turning on but the device is still not booting, it’s time to replace the DC jack. If that doesn’t help, it’s a clear indication of a motherboard-related issue. You can either get the motherboard repaired or replaced by the brand service center. Getting the motherboard repaired could cost you anywhere up to Rs 10,000, whereas the cost of replacing the motherboard can go anywhere up to Rs 25,000.

If you ever notice multi-coloured or single-coloured vertical lines on your laptop screen, it may be a result of a hardware failure or due to damage to the screen. To try fixing it yourself, first unplug your laptop, hold the power button for 30 seconds and restart the laptop. If you continue to see coloured lines, the issue is probably with the LCD screen, which will need to be replaced from the brand’s service center. To be sure about the LCD screen problem, try connecting your laptop to another monitor and see if the issue persists. If it does, the issue is certainly in the LCD panel.

On turning on the laptop when you see the lights blinking and hear the fan working but if the laptop screen is blank and doesn’t display anything, this is again an indication of a faulty motherboard. The first thing to do is to transfer all the data to another drive to make sure your data is safe. Before going ahead and getting the motherboard repaired or replaced, you could try performing a hard reset (also known as a factory reset), which can mostly help in resolving the blank display issue.

Firstly, check if your laptop’s brightness level is set to maximum. If the display is still dim, try restarting the device. This could just be a system error that can be resolved by restarting the device. Also, check if the AC adapter cord is loose and firmly connect it to the outlet and laptop. If the issue still persists, it is mostly due to a failure of the LCD. Behind the LCD, there is an inverter board and backlight bulb which control the picture.

The inverter board converts the low voltage your laptop uses, into higher voltage required by the long bulb that lights up the LCD screen. If the inverter board or bulb fail, you will experience the problem of a dimmed display. Even if one of these two components fail, the screen will need to be replaced, unless the service center can help by just replacing the bulb. We wouldn’t recommend you try resolving it yourself, as this is more complex and you could end up damaging the circuit board and the backlight lamp. So, it’s best to leave this job to an expert.

Need an expert to take a look at your laptop? Book Onsitego’s on-demand repair service. Besides taking care of common laptop problems like battery draining or laptop hanging, we can help with issues like setting up the operating system or removing malware/virus from your device. Our service engineers are qualified and use only good-quality spare parts while repairing. The best part is that our service is backed with a 90-day post-service warranty.