tft lcd backlight driver quotation

We have a TFT 7 inch LCD backlight application. The backlight rating is max 20V/ 150 mA. Attached is the diagram we want to use in our system. Please let us know if the circuit connection is fine. If not, please suggest us a part for the same application.

The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

INT070ATFT and INT070ATFT-TS are embedded display driver boards based on the Displaytech 7 inch 800 x 480 RGB resolution TFT display module. This embedded driver board includes a 7" standard or resistive touchscreen display. Mounted on the embedded board is the Solomon Systech SSD1963 LCD controller that supports common RAM-less LCD drivers and offers the following features and benefits:

Now, I do not have experience with backlight, but it seems to me that their choice of a driver is far from optimal. First, MIC2289 is a booster designed to drive up to 34V diodes in series, while the display has five LEDs in parallel. Second, the chip requires external components for soft-start, while many of the alternatives have that built-in.

While looking through LED drivers at digikey I realized that this particular application falls into weird "grey area" because of the way the LEDs are connected. The majority of chips are either step-ups designed to drive series of diodes from single lithium battery in mobile applications, or step-downs designed for higher voltage sources in lighting/automotive applications.

The display datasheet says backlight should be driven by constant current 100mA and "for the reference only" implies that this would require 2.8V to 3.4V. In my case there is 3.3V available from on-board DC-DC, which falls smack-dab in that range. So, any step-up seems to be wrong, for that potential 0.1V difference. Step-downs could be OK, but I don"t know if they really necessary. There are some linear chips like BCR421U that can do the job just fine with only one external resistor, while dissipating 0.05 Watt in the worst case and supporting nice 25kHz PWM dimming.

QUESTION: Which driver topology would you recommend? Do you know of any drivers better suitable for this application and requiring minimum external components?

If your design is using a single board computer (SBC) it is possible for our TFT panel to interface directly to your board with no additional driving board.

When choosing your display it is important to consider that a display using a CCFL backlight will need AC current to power the backlight, this can be provided with an inverter if an AC power source is not available in your design.

Via the IF422 FFC adapter + backlight driver board you can easily connect the Ortustech TFT Displays COM35H3P39ULC, COM35H3P44ULC and COM43H4N58ULC to an LVDS and backlight interface. IF422 features a wide LED input voltage range from 9 to 35V and the backlight converter is integrated on the board.

lcd backlight driver (also known as inductive proximity sensors or proximity switches) are electrical command devices that can replace other mechanical types of switches such as limit switches, microswitches, and many others. They are able to detect metal and aluminum targets or designated positions without contact.

lcd backlight driver can be used for a number of industrial applications including in warehousing and material handling as they are able to check the position of lifting arms. Other applications include usage in heavy machinery such as forklifts, trucks, as well as the monitoring parts of hydraulic machines.

Some of the lcd backlight driver available can operate with no noise, bounce, and reaction, and are able to operate without any sensitivity to vibrations and shock. The lcd backlight driver come with the core components: coils, an oscillator, an output amplifier, as well as a Schmitt trigger. There are different versions of this sensor available, including unshielded (which allows for wider sensing distances) and shielded (with an electromagnetic field that is concentrated at the front).

You can get lcd backlight driver with an operation range that suits your specific application, choosing from a wide selection of suppliers. Source wholesale lcd backlight driver on Alibaba.com for your business and enjoy a wide variety and great deals.