262k-color qvga tft lcd screen pinout in stock

You may have noticed that I have a bit of a ‘thing’ for the little TFT displays that you can commonly get on ebay. There’s something satisfying about writing your own driver code and seeing one of these little panels come alive with your graphics.

I hand-routed the traces and designed it so that the FPC cable from the 24-pin connector would wrap-around the board so that the LCD could be mounted on the opposite side to the LED driver components, with the 2.54mm MCU interface pins sticking up next to it.

Whatever you do, do not connect this circuit directly to a device with 5V levels such as the Arduino. The inputs and voltages are not 5V tolerant. An Arduino could be used to interface with this LCD with the addition of a level converter.

So far so good. No reason to get too excited though, in the above photograph all that I’ve done is test that the backlight circuit works and that the LCD powers up. Clearly it’s working so far.

You can also see four white LEDs wired in series in a breadboard behind the LCD. I used this LED string to test the output of the constant current driver before actually connecting the LCD. That’s why my development board exposes the V+ and V- output and feedback pins from the LED driver.

With the LCD mated snugly to the development board using double-sided sticky pads that keep it clear of the traces on the back of the PCB we’re ready to start reverse engineering the bus protocol.

Right away we’re on to something. Trawling through my collection of datasheets for TFTs I can see that the Leadis LDS285 uses 04h as its read device identifier (RDDID) code. The first byte returned by these controllers is always a dummy read, the real data is the values 54h and 80h, with 54h being the manufacturer code.

A quick search of the online list of MIPI manufacturer ids shows that 54h belongs to Arasan Chip Systems, Inc. Arasan is not a familiar name to me but their website reveals that they are engaged in making vertically integrated MIPI chipsets, i.e. the LCD controller, camera, file system etc. that you’d need if you were building a phone. The worrying news is that Leadis, whom we suspect of being the controller manufacturer have gone bust. I’m guessing that there is some kind of licensing agreement going on whereby Arasan and Leadis have collaborated to create an integrated controller.

Some random googling shows that there is someone else who’s experimented with LCDs from similar models to this one and determined that they tend to be command-compatible with a controller called the Magnachip MC2PA8201. This controller is itself a cut-down version of the LDS285. I’m going to assume that this is the one and see how far I get. Now it’s time to write an stm32plus driver for it and see if we can it to work!

The controller is documented to support colour depths up to 24-bit but this LCD will not go higher than 262K colours. Attempts to use 24-bit mode results in display corruption. This is not surprising given that the phone specifications are for a 262K colour display. Colours transferred in 262K mode must have their lower 2-bits zeroed.

Either some of the colours are verboten or this cheap LCD has problems with a very small subset of colours. Very rarely an attempt to write a run of a certain solid colour will result in weird corruption. This is odd because adjusting the colour by only 1-bit will correct the problem.

stm32plus 1.1.2 comes with drivers for the 64K and 262K colour modes for this LCD. You can see my usual demo sequence that exercises the capabilities of both the LCD and my graphics library in the video below.

The key to getting any of these TFT devices up and running is the initialisation sequence, i.e. what you have to do after power-on in order to get the display powered up and ready for commands. To help you on the way, this is the basic sequence for this controller. The extract is from the stm32plus driver, but the code should be self-explanatory.

A 2.4” TFT LCD module consists of a bright backlight (4 white LEDs) and a colourful 240X320 pixels display. It also features individual RGB pixel control giving a much better resolution than the black and white displays. A resistive touch screen comes pre-installed with the module as a bonus and hence you can easily detect your finger presses anywhere on the screen.

The TFT comes with an auto-reset circuit which gets active on every breakout. However, a user can reset the module using this pin also, in case setup is not resetting clean.

The TFT comes with an auto-reset circuit which gets active on every breakout. However, a user can reset the module using this pin also, in case setup is not resetting clean.

Resistive Touch Pins – Y+, X+, Y-, and X- are the 4 resistive touch pins which require analog pins to read and determine touch pins. Their overlay is fixed at the top of the module which makes them electrically separate from the TFT. They can be used is 8-bit as well as SPI mode.

The 2.4” TFT LCD module supports many modes. However, two of them are very popular among users – “SPI mode” and “8-bit mode”. The display contains pins on both sides required for a mode and a user can switch easily between them by simply rewiring the display. It should be noted that only one mode can be used at a time.

A 2.4” TFT module has a very flexible usage. It is compatible with all your DIY projects where you want to add a bright, colourful, and touchscreen enabled display.

ER-TFT024-3 is 240x320 dots 2.4" color tft lcd module display with ILI9341 controller and optional 4-wire resistive touch panel and capacitive touch panel,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 8-bit,9-bit,16-bit,18-bit parallel,3-wire,4-wire serial spi interface. FPC with zif connector is easily to assemble or remove.Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 2.4"TFT Touch Shield with Libraries, EXxamples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

You may wish to have NEWHAVEN NHD-2.4-240320,our part number ER-TFT024-4 should meet this requirment that is the completely the same withNEWHAVEN NHD-2.4-240320.

ER-TFT024-4 is still not our general product ,we don"t have enough stock .You have to email ([email protected]) our sales to buy samples or orders. Besides the minimum order quantity is no less than 500pcs per order.The production lead time is 5-6 weeks.

Text: interface pin assignment Application Note 18 V 2.0, 2004-02 AP16018 TFT graphic display driven , Test Pin } Application Note 31 V 2.0, 2004-02 AP16018 TFT graphic display driven by , (including a reference to this document) to: mcdocu.comments@infineon.com AP16018 TFT graphic display , of the TFT Display EDTCA07QEF(Data Modul). 2 Picture of the , . 2 Application Note 3 V 2.0, 2004-02 AP16018 TFT graphic display driven by C167CS

Abstract: CT05350DW0000T stm32f103zet6 manual STM32F10xx lcd qvga 320x240 STM32 firmware library user manual 3.5 stm32f10x manual timer pwm STM3210x-LCDDrive 2.8" TFT LCD DISPLAY projects 2.4 lcd qvga 320x240

Text: TFT RGB line on its low level which results in a single pixel display : VSYNC: GPIO - pin PA8 , the TFT to display one frame. Along with data scanning, dummy data writes are required for the TFT , the TFT RGB lines. In this way, the STM32 manages the complete image display for controller-less TFT LCD modules. Figure 7 and Figure 7 show the TFT - LCD single-frame and horizontal-line display flow , TFT - LCD single-frame display flow diagram Start new frame Reset TFT-LCD module Set VSYNC

Text: of a jumper field Pin and socket connectors X7 X5 X6 X8 X9 J1 R126 Flat display connection 50- pin for all flat display technologies 24- pin flat display connection for B/W-LC-Displays 24- pin flat display connection for 9 BIT-TFT-Displays 44- pin D-SUB pin and socket connector for connecting , VEESTN+ at X7 between pin 43 and GND. Measure VEESTN- at X7 between pin 41 and GND. (Observe display , the Display plug X7 9BIT TFT LQ10DH11 LQ10DO11 9BIT TFT LQ10DO21 LQ9DO11 9BIT TFT

Abstract: lcd 2X20 8 pin lcd 3.2 SSD1289 32-inch lcd Color TFT LCD Module SSD1289 application note 3.2 tft color touch lcd display module LCD Module 2x20 display 2x20 lcd lcd 2X20 16 pin 18 inch lcd interface with microcontroller

Text: (max 10 MHz clock) · Diagonal size: 3.2 inch · Display technology: TFT · Display mode , used. See datasheet for details about interface timing. Pin Description 1, 39 Power supply , pin 39 supply the backlight. 2, 10, 40 Ground 3 CFG1 / PSX interface configuration pin , Color LCD Board Pin Numbering Copyright 2007 © Embedded Artists AB 3.2 inch QVGA TFT Color LCD - , still be accessed with just one extra wire, from pin 45 on the display module to P0.16 on the OEM Base

Abstract: skc24 13 pins vga signal cable UV6-5595 standard 15 pin vga connector MALE TO FEMALE UV635 vga connector hsync 663 lcd inverter 39 PIN TFT DISPLAY skb 14

Text: (250 cd/m2) TFT Display . A PC ISA bus driver Card, an inverter to drive the twin CCFL backlights, full , and go solution. q High Brightness 10.4" TFT LCD Display q q q q q IBM compatible LCD Kit Hook up and , . Output connection PIN designation colour TFT panels (18 B.P.C.) Signal name Blue data bit 0 Blue data , Data Pack F Issued November 1999 249-4873 Data Sheet TFT LCD Kit Colour TFT LCD kits and monitors (with or without touch screen) RS stock number 249-8780 (10.4in. TFT LCD kit) A fully

Abstract: vga connector 28 pin IDC ibm pc FRONT PANEL connector CIRCUIT ultraview 635 CONECTOR vga LCD GLASS PANELS 42 pin Mono tft PC CONECTOR vga screen cleaner Stn LCD VGA mono

Text: 10.4" VGA High Bright (250 cd/m2) TFT Display . A PC ISA bus driver Card, an inverter to drive the , 211 167 Mechanical specifications for display q High Brightness 10.4" TFT LCD Display , driver to a Corn Port (touch version only) q One UV670 ISA graphics card to drive the TFT display q , for multi-display applications. 249-4873 Output connection PIN designation colour TFT panels (18 , DSR (comm 1 pin 6) 19 Display off (Note 5) 7 GND (comm 1 pin 5) 20 no connection

Abstract: LCD tv display pinout diagram HITACHI lcd tv power supply diagrams sharp lcd panel pinout 30 Pinout panel lcd lcd color 176 132 Hsync Vsync RGB signal LCD laptop 8 Pinout monochrome lcd 14 laptop lcd pin configuration WD90C20

Text: adjustment for TFT color LCD panel Uses a 44- pin MQFP package The WD90C55 supports laptop computers that , flat-panel display controllers and a variety of LCD panels. Including TFT and STN color panels. It also acts , SEL2 PDOWN XENABLE VSS VDD XFP XLP XUCLK XLCLK DO D1 D2 PIN NO. 31 32 33 34 35 36 37 38 39 40 41 42 , . NAME UD3 UD2 UD1 UD0 LD3 LD2 LD1 LD0 RPLT RESET PDOWN SEL2 SEL1 SEL0 PCLK SCLK PIN 43 42 41 40 39 38 37 , ) MCLK. 132 - PQFP TFT COLOR LCD MONOCHROME LCD SIMULTANEOUS CRT AND TFT COLOR LCD DISPLAY

Text: Credit Card Size VM800B module, supports 3.3/5v MCU Adapter Board, 3.5 inch TFT LCD display panel , , 4.3 inch TFT LCD display panel preinstalled, black bezel VM800B35A-BK Credit Card Size VM800B module, supports 3.3/5v MCU Adapter Board, 5.0 inch TFT LCD display panel preinstalled, black bezel VM800B35A-PL Credit Card Size VM800B module, supports 3.3/5v MCU Adapter Board, 3.5 inch TFT LCD display , Adapter Board, 4.3 inch TFT LCD display panel preinstalled, pearl bezel VM800B35A-PL Credit Card

Abstract: LVDS connector 20 pins LCD 13.3 Samsung tube tv samsung lt133x1-104 TFT LCD n 740 samsung SD5114 lt133x date code marking samsung transistor 2SK1059 DIAGRAM of samsung lcd tv power supply

Text: display (LCD) using amorphous silicon TFT as switching devices. It is composed of a TFT LCD panel, a , - Negative PIN # 41 6 R1IN 0+ Positive PIN #40 7 R1IN 1- Negative PIN # 39 , R2IN0+ Positive PIN #40 15 R2IN 1- Negative PIN # 39 16 R2IN 1+ Positive , Molex WAFER ASSY 53779-2090 Connector on the TFT module side 5.3 BACK LIGHT UNIT Pin NO. Symbol , -( 6 ) 3. Electrical Characteristics 3.1 TFT LCD Module 3.2 Backlight Unit - - - - - - - - -

Text: frequency · bpp · display type, STN mono/color or TFT · STN 4 or 8-bit interface mode · STN dual or , passive Super Twisted Nematic (STN) and active Thin Film Transistor ( TFT ) LCD display types: STN , on mono, or color creation on color displays. TFT displays TFT display panels require the , Tables A-5 and A-6. 1 December 2000 D Errata changes to Fig 2-6, Table 3-2, 3-9 , 3-14, and A , 2-1 Table 3-1 Table 3-2 Table 3-3 Table 3-4 Table 3-5 Table 3-6 Table 3-7 Table 3-8 Table 3-9

Abstract: 10 PIN FRC CONNECTOR SIL101 pin connection lvds cable samsung DF14A-20S-1 SAMSUNG LCD GRAPHIC DISPLAY MODULE samsung lvds connector 51 pin 2SK1059 SAMSUNG LCD GRAPHIC DISPLAY 7 tft inverter scheme diagram

Text: Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT switching devices. This , PIN#39 8 R1IN 1+ Odd Receiver Signal(+) Positive PIN #38 9 R1IN 2- Odd Receiver , Receiver Signal(+) Positive PIN #40 15 R2IN 1- Even Receiver Signal(-) Negative PIN#39 , -131 CONTENTS General Description -( 3 ) 1. Electrical Characteristics 1.1 TFT LCD Module 1.2 Back-light Unit -( 4 ) 2. Block Diagram 2.1 TFT LCD Module 2.2

Text: crystal display (LCD) that uses amorphous silicon TFT as a switching devices. this model is composed of a , ) (13.3diagonal ) mm Driver element a-si TFT active matrix Display colors 262,144 colors , Signal(+) Positive PIN #40 7 R1IN 1- Odd Receiver Signal(-) Negative PIN # 39 8 , ) Positive PIN #40 15 R2IN 1- Even Receiver Signal(-) Negative PIN # 39 16 R2IN 1 , TFT LCD Module 3.2 Backlight Unit - - - - - - - - - - - - - - - - - - - ( 11 ) 4. Block Diagram

Abstract: HX121WX1 FI-JH40S-HF10 backlight smd HX121WX1-100 15KV THC63LVDM83A 2.6 TFT color LCD Module 240 X 320 lvds 40 pin lcd led Kyocera lcd cross reference

Text: R2 TFT-LCD (Rx) Remark 51 R1 System (Tx) 39 R0 Pin No Interface SPEC , . NUMBER B2005-C001-A(1/3) PRODUCT GROUP TFT LCD REV. P2 ISSUE DATE 2008. 01. 14 PAGE 1 OF 29 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P2 2008. 01. 14 , Specification PAGE 2 OF 29 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT P2 , 17 8.0 Input Signals, Basic Display Colors & Gray Scale of Colors 19 9.0 Power

Text: VM800B module, supports 3.3/5v MCU Adapter Board, 3.5 inch TFT LCD display panel preinstalled, black bezel VM800B43A-BK VM800B module, supports 3.3/5v MCU Adapter Board, 4.3 inch TFT LCD display , inch TFT LCD display panel preinstalled, black bezel VM800B35A-PL VM800B module, supports 3.3/5v MCU Adapter Board, 3.5 inch TFT LCD display panel preinstalled, pearl bezel VM800B43A-PL VM800B module, supports 3.3/5v MCU Adapter Board, 4.3 inch TFT LCD display panel preinstalled, pearl bezel

Abstract: samsung ccfl backlight inverter hp lcd inverter pin diagram TFT LCD display circuit diagram of 30 pin out circuit diagram for samsung lcd samsung lcd tv block diagrams power supply samsung tv samsung backlight inverter tcl tv circuit SAMSUNG lcd INVERTER

Text: color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon , mm Driver element a-Si TFT active matrix dot Display colors 262,144 color Number , Receiver Signal(-) Negative PIN#39 8 R1IN 1+ Odd Receiver Signal(+) Positive PIN , - Even Receiver Signal(-) Negative PIN#39 16 R2IN 1+ Even Receiver Signal(+) Positive , -( 3 ) 1. Electrical Characteristics 1.1 TFT LCD Module 1.2 Back-light Unit 1.3 Inverter

Abstract: schema monitor crt 3,3V Spannungsregler fotowiderstand lcd backlight inverter schema schema Lcd monitor schema inverter connettore d-sub circuito stampato lcd panel schema vga pcb D-sub connector

Text: and passive DSTN colour TFT EL CRT can be used simultanously with all display types (DSTN with , @ 12V (without display ) Connectors: _15pin HD D-sub female (CRT) 50 pin male header ( display ) 44 pin HD D-sub female ( display ; only for 5V displays) Conditions Ambient , connector This 50 pin male header with a pitch of 2.54mm can be used with all display technologies supported by this card. The pin out for the used display types is described in table 2. 2.2 X8: External

Abstract: hp g61 lcd block diagram LT133XM-101 SIC-133 lvds 32 pin lcd samsung 2SK1059 2SK1339 DS90CF384 power supply samsung tv samsung sic- inverter

Text: color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon , a-si TFT Active Matrix Display colors 262,144 color Number of pixel 1,024 x 768 pixel , ) Note 3) Definition of Response time : Sum of TR ,TF White( TFT OFF) Display data Black( TFT ON , 12 CK1IN + Odd Clock Signal (+) Positive PIN # 39 13 R2IN0 - Even Receiver Signal , 20 CK2IN + Even Clock Signal (+) Positive PIN # 39 Power Supply 5.0V Power Ground

Text: of the NL2432HC22-41K TFT display . CSI control CN2 Standard header, male 2x5 Pin Name , NL2432HC22-41K TFT display . Touch Screen CN3 Standard header, male 2x5 Pin Name Board connection , EB-EXT-QVGA-PT Quick Start-up Guide V1.0 EASE-UM-0070-1.0 NEC QVGA portrait TFT Display Board , -0070-1.0 1 Introduction This document is a quick start-up guide for the "NEC QVGA portrait TFT Display , The NEC QVGA portrait TFT Display schematics is a rather simple design, because it mainly adapts the

Abstract: LT140X1-101 hp lcd inverter pin diagram 7 inch tft tv circuit diagram samsung lvds 40 pin samsung tv lvds connector samsung ccfl backlight inverter lcd inverter 7 pin diagram lcd LVDS display 30 pin connector xga power supply samsung tv

Text: color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon , mm Driver element a-Si TFT active matrix dot Display colors 262,144 color Number , PIN #40 7 R1IN 1- Odd Receiver Signal(-) Negative PIN#39 8 R1IN 1+ Odd Receiver , #40 15 R2IN 1- Even Receiver Signal(-) Negative PIN#39 16 R2IN 1+ Even Receiver , -( 3 ) 1. Electrical Characteristics 1.1 TFT LCD Module 1.2 Back-light Unit 1.3 Inverter

Text: TFT COLOR LCD MODULE NL8060AC26-11 26 cm (10.4 type), 800 × 600 pixels, 262144 colors, incorporated two lamps/edge-light type backlight DESCRIPTION NL8060AC26-11 is a TFT (thin film transistor) active matrix color liquid crystal display (LCD) module comprising amorphous silicon TFT attached to each signal electrode, a driving circuit, and a backlight. The 26 cm diagonal display area contains 800 × 600 pixels and can display 262144 color simultaneously. NL8060AC26-11 is the same outline

Abstract: SIC-140 samsung lcd tv power supply diagrams 22"SAMSUNG pcb lcd display connector diagram power supply samsung 32 in LCD TV circuits LT140X1-102 tcl lcd tv power circuit diagram pin connection lvds cable lcd samsung samsung samsung lcd inverter circuit

Text: matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT switching , treatment mm 262,144 Number of pixel NOTE a-Si TFT active matrix Display colors UNIT , PIN #40 7 R1IN 1- Odd Receiver Signal(-) Negative PIN#39 8 R1IN 1+ Odd Receiver , #40 15 R2IN 1- Even Receiver Signal(-) Negative PIN#39 16 R2IN 1+ Even Receiver , the TFT module side 5.3 BACK-LIGHT UNIT PIN No. INPUT [ ch1 ] , [ ch2 ] Color Function

Text: PIN # 14 28 41 56 118 3 15 29 42 57 117 4 18 40 59 119 19 39 58 120 Name RVDD1 RVDD2 RVDD3 RVDD4 , PHS t3 PDE (b) Vsync width and display position in TFT t4 PVS t18 t19 t5 t2 PHS t6 RGBs (c , DAT-0025-A DAT-0025-B DAT-0025-C Internal Release First Public Release Updated Pin Descriptions (page 5) Deleted English Units (page 39 ) Corrected Ordering Information (page 40) DAT-0025-D C0025-DAT, . 4 3.1 4.1 4.2 4.3 4.4 4.5 4.6 PIN DESCRIPTION

Text: transistor( TFT ) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This , ©ç„¶æ˜¾ç¤ºæœ‰é™å…¬å¸ SHENZHEN HAORAN DISPLAY CO., LTD 3. PIN DESCRIPTION FPC connector is used for , must be adjusted to optimize display quality: cross talk, contrast ratio and etc. Note2: VGH is TFT , 深圳市浩然显示有限公司 SHENZHEN HAORAN DISPLAY CO., LTD PRODUCT SPECIFICATION MODEL , ©ç„¶æ˜¾ç¤ºæœ‰é™å…¬å¸ SHENZHEN HAORAN DISPLAY CO., LTD REVISION STATUS Version Revise Date Page V1

Text: Display (EOSD), and General-Purpose I/O Bus (GPIO) Pin No. 107 Name HFS In/Out In 5V Tolerant Input ? 5V , width and display position in TFT t4 PVS t18 t19 t5 t2 PHS t6 RGBs (c) Horizontal size in TFT , . 4 3.1 PIN DESCRIPTION , . 21 5.6.1. TFT Panel Interface Timing Specification . 21 5.6.2. TFT LCD Power Sequencer

Text: ). 93 Figure 6. 39 Display Control 1 Register (R26h , 320 dot, 262K color, TFT Mobile Single Chip Driver DATA SHEET V02 4. Pin Description 4.1 Pin , GRAM, TFT Mobile Single Chip Driver Version 02 November, 2007 HX8347-A01 240RGB x 320 dot, 262K color, with internal GRAM, TFT Mobile Single Chip Driver List of Contents November, 2007 1 , . 9 2.1 Display

This 240x320 resolution LCD TFT is a standard display with 8-bit/16-bit Parallel interface, offering 262K colors and a 6:00 optimal view. This Liquid Crystal Display has a built-in ST7789Vi controller, FFC ZIF I/O connection, is RoHS compliant and does not come with a touchscreen.

Adjust the length, position, and pinout of your cables or add additional connectors. Get a cable solution that’s precisely designed to make your connections streamlined and secure.

Enhance your user experience with capacitive or resistive touch screen technology. We’ll adjust the glass thickness or shape of the touch panel so it’s a perfect fit for your design.

Description: This is a compact 2.3" diagonal color 320x240 pixel QVGA screen found out the inside of many cellular flip phones. These are meant to be deeply embedded, but because of the wonderful economies of scale, we can offer them for very low-cost.

You can actually see through the glass. Unit does not come with a backlight, but it does mount very nicely to a specially designed backlight related below. The ribbon folds around the back of the backlight frame and has a cut-out in the ribbon for our smaller 1.1" QVGA display.

ILI9341 is a 262144-color single-chip SOC driver for a TFT liquid crystal display with resolution of 240x320 dots (RGB), comprising a 720-channel source driver, a 320-channel gate driver, 172800 bytes GRAM for graphic display data of 240x320 dots (RGB), and power supply circuit.

ILI9341 can operate with 1.65V ~ 3.3V I/O interface voltage and an incorporated voltage follower circuit to generate voltage levels for driving an LCD.

ILI9341 supports full color, 8-color display mode and sleep mode for precise power control by software and these features make the ILI9341 an ideal LCD driver for medium or small size portable products such as digital cellular phones, smart phone, MP3 and PMP where long battery life is a major concern.

This product is a 3.2” QVGA TFT-LCD with touch panel. SPI pins are included and Arduino pin supported. Board can interface 8/16 bit microcontroller. Easy to integrate with any microcontroller such as AVR, ARM,ARDUINO, 8051.