kuman 3.5 tft lcd shield arduino brands

Note: There is a film on the LCD, if there is scratch on the film when you receive the item, pls try to remove the film with your finger nail from the corner of the LCD, thanks.

Note: There is a film on the LCD, if there is scratch on the film when you receive the item, pls try to remove the film with your finger nail from the corner of the LCD, thanks.

I bought online this LCD Touchscreen Kuman SC3A-NEW-UK. It uses ILI9486 drivers, but it didn"t include any instructions manual, and kumantech.com seems to be devoid of complete technical documentation about SC3A-NEW-UK model.

Just in case it wasn"t noticable: I am trying to make a "Hello World" for my SC3A-NEW-UK"s LCD Touchscreen from an Arduino UNO board. In other words: just print "Hello World" to see if it works.

To see if I can use it, I tried downloading a whole ZIP from this Github project, and inside the Arduino IDE, I tried adding the downloaded library using the option "Include .ZIP library". If I copy-paste the code example provided within README.md (the following) and compile:

This compiled in Arduino IDE, no problem, but I still don"t know if it will work well with my screen. I am also confused about initialization of the TFT object and how would I have to wire the LCD screen to the Arduino depending on this initialization:

...i mean, my LCD screen has CS and RESET pins, but what is DC supposed to be here? (in this context, I don"t think it stands for "Direct Current"... but there"s no DC pin reference in my LCD screen written "AS IS"... ?? This brings me more confusion...

...specially having in mind that I don"t know how am I supposed to wire the LCD screen to the Arduino yet. It seems the LCD pins have been designed to fit in directly to the Arduino board without thinking too much about it (like the shape is the same), but that would make the screen getting all the Arduino UNO"s pins for itself, so I don"t think so...

...so, powering the screen shouldn"t be a big deal, but, how am I supposed to connect everything else? I am completely misguided about how am I supposed to interact with the screen from Arduino code... what is RS pin for? Should I use 4-bit or 8-bit mode? (I think 4-bit would imply connecting 4 digital pins for the screen, and 8-bit the whole 8 pins from screen to the Arduino UNO board)? Should I use LCD_RD and LCD_WR? Well you have a picture of my confusion.

Even though I know how to control Input/Output in Arduino code to interact with analog/digital input and output pins at will with C++ in Arduino code (but even so, I think I"m still an Arduino n00b), this LCD screen"s physical interface is very confusing to me...

PD: I have read somewhere that this SC3A-NEW-UK Touchscreen is made to shield Arduino MEGA boards (by fitting the PINs directly into it), but mine is an Arduino UNO Board! (perhaps I shouldn"t have bought This LCD model, then?)... but I have sets of wires, pinboards and stuff... I don"t want to give up the idea of harnessing this LCD screen using an Arduino UNO. I don"t care about shielding feature, I just want to wire it and make it work. I will figure out how to shield electronics later on.

Based on VE7JRO"s answer, I managed to map the connections by seeing where the connections would go if I just fit the connections shielding the Arduino UNO, the way VE7JRO suggested:

I put NONE for A5 input, because that pin of LCD screen doesn"t have any name on it. There are another ones without name as well, that I didn"t include in this table. I believe (perhaps I"m wrong believing it, I don"t know) that those pins without name have no use.

The bad thing about this layout is that it consumes almost all the Arduino pins, so I would not be able to attach additional circuits. However, perhaps I should not be worrying about earning connections yet, before testing the screen.

I still don"t know much of the details about what pins do what for the screen, but I have read somewhere that LCD_D0 to LCD_D7 are meant to receive digital data in some kind of 8-bit parallel mode. But I also heard that there is a 4-bit mode. If I could use that mode with this screen, I would be able to have 4 free digital pins for anything else...

I tested VE7JRO"s code. LCD Screen did draw the interface as expected. But buttons didn"t respond. I found out the code sample needs further calibration.

The fifth parameter is supposed to be the resistance measured between LCD_D6 and LCD_RS with the screen unplugged. Unfortunately, my multimeter can"t measure it for some reason (I put it in 2000 Ohms mode for reading resistance: I always get "1", the same than when I don"t connect anything... like if multimeter"s contacts aren"t working well, I don"t know)... so I left the default 300 value.

Frequently Asked Questions About kuman 3.5 TFT Touch Screen with SD Card Socket for Arduino touch display compatible R3 Board with Touch Function SC3A-1 in INDIA

Where can I buy kuman 3.5 TFT Touch Screen with SD Card Socket for Arduino touch display compatible R3 Board with Touch Function SC3A-1 online at the best price in the INDIA?

desertcart is the best online shopping platform where you can buy kuman 3.5 TFT Touch Screen with SD Card Socket for Arduino touch display compatible R3 Board with Touch Function SC3A-1 from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is kuman 3.5 TFT Touch Screen with SD Card Socket for Arduino touch display compatible R3 Board with Touch Function SC3A-1 available and ready for delivery in INDIA?

desertcart ships the kuman 3.5 TFT Touch Screen with SD Card Socket for Arduino touch display compatible R3 Board with Touch Function SC3A-1 to and more cities in INDIA. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the kuman 3.5 TFT Touch Screen with SD Card Socket for Arduino touch display compatible R3 Board with Touch Function SC3A-1 speedily without the hassle of shipping, customs or duties.

Is it safe to buy kuman 3.5 TFT Touch Screen with SD Card Socket for Arduino touch display compatible R3 Board with Touch Function SC3A-1 on desertcart?

Yes, it is absolutely safe to buy kuman 3.5 TFT Touch Screen with SD Card Socket for Arduino touch display compatible R3 Board with Touch Function SC3A-1 from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

Please note that you need to install our Jessie OS with the pre-installed drives on a new or format SD card, If you dont install our jessic OS with the pre-installed drives, you will be starting at a white LCD panel.We have do test on OS, If you want to use Other system, maybe you need to add drivers by yourself.

Arduino and the various, similar single-board computers are awfully simple by nature, at least as electronics go. For that reason, we don"t have any new contenders to report, as our current list covers just about all the sizes and price ranges common to projects on these versatile and educational platforms.

We still recommend the Nextion K035 Enhancedas the best for most users, due not only to its reliable LCD panel, but also the hardware inside, which is superior to most other models. The Kuman SC3A-1, on the other hand, is less full-featured but also costs notably less. The Adafruit 1947is one with a bit of a reputation as a high-performing, lost-lasting touch screen, and the Walfront 7-Inchis one of the better large-format options around.

Arduino is an immensely interesting platform, and is a great way to create custom electronic controllers for a huge range of purposes. It"s also an excellent way for young people and other beginner engineers to get into the field. Because it"s so small and simple, low prices are somewhat of a hallmark of the category. The Nextion Enhanced models are packed with the most advanced features, and for full functionality, they"re the way to go, though they aren"t always the cheapest. Nonetheless, the 2.8- and 3.2- inch versions are great selections. For basic and more low-budget purposes, check out the Kuman, Elegoo, and HiLetGo, which are all designed to plug directly into the smallest Arduino boards. For more in-depth projects, it"s hard to beat AdaFruit and WishIOT, who offer a number of versatile and highly reliable options. And if you"re going for maximum visibility, check out the Walfront, which has a crisp and large screen, although be aware that most controllers won"t be able to achieve extremely high refresh rates at such high resolutions. Also keep in mind that there is a wide selection of projects, tutorials, and libraries for the entire Arduino family available online.

Looking for single board computers, monitors and electrical meter sockets products but having no idea? Kuman buying guide are here to provide you with a better insight on the quality and performance of the single board computers products.

When purchasing a product, price is the consumer"s primary concern. At present, Kuman has 174 products for sale. Kuman products range in price from $8.98 to $62.99, and the average price of all the products is about $27.35.

We found that most of the Kuman products are manufactured by GAOPAN. The manufacturer provides Kuman with a steady supply of products, and they have a good cooperative relationship with each other.

You can purchase Kuman products from the Amazon seller kumanshop, over the last 12 months, the seller has received honest feedback from 369 consumers, and the average rating is 4.84. The store has a good reputation so you can purchase from it with confidence.

View the products interest you on Amazon to read the customer reviews and check the ratings. Besides, you can hit the "brand" to find more Kuman products.

Kuman sells its products and services in the single board computers category, mainly including single board computers, monitors and electrical meter sockets. If you are looking for these products, Kuman can be your candidate.

We analyze millions of Kuman products reviews and customer reviews to recommend the best picks for most consumers. We have a professional team with decades of experience to test the products, which can help ensure that we provide our readers with accurate advice and best recommendations.

There are usually 5 to 10 products in a brand buying guide. We found 174 Kuman products for sale, 16 of which were analyzed in detail and recommended to customers.

Select the product you want in the Kuman buying guide, and then view the product on Amazon. For example, if you are interested in the top 1 product kuman KW47-US Electricity Usage Monitor Plug Power..., you can view it on Amazon page.

Most of the Kuman products are produced by GAOPAN. The manufacturer provides Kuman with a steady supply of products, and they have a good cooperative relationship with each other.

Our mission is to provide you with the most up-to-date and objective information about the Kuman products, helping you make more informed buying decisions. We recommend best choices of the products from the Kuman brand, helping you make better shopping choices with less time and energy.

In this Arduino touch screen tutorial we will learn how to use TFT LCD Touch Screen with Arduino. You can watch the following video or read the written tutorial below.

As an example I am using a 3.2” TFT Touch Screen in a combination with a TFT LCD Arduino Mega Shield. We need a shield because the TFT Touch screen works at 3.3V and the Arduino Mega outputs are 5 V. For the first example I have the HC-SR04 ultrasonic sensor, then for the second example an RGB LED with three resistors and a push button for the game example. Also I had to make a custom made pin header like this, by soldering pin headers and bend on of them so I could insert them in between the Arduino Board and the TFT Shield.

Here’s the circuit schematic. We will use the GND pin, the digital pins from 8 to 13, as well as the pin number 14. As the 5V pins are already used by the TFT Screen I will use the pin number 13 as VCC, by setting it right away high in the setup section of code.

I will use the UTFT and URTouch libraries made by Henning Karlsen. Here I would like to say thanks to him for the incredible work he has done. The libraries enable really easy use of the TFT Screens, and they work with many different TFT screens sizes, shields and controllers. You can download these libraries from his website, RinkyDinkElectronics.com and also find a lot of demo examples and detailed documentation of how to use them.

After we include the libraries we need to create UTFT and URTouch objects. The parameters of these objects depends on the model of the TFT Screen and Shield and these details can be also found in the documentation of the libraries.

So now I will explain how we can make the home screen of the program. With the setBackColor() function we need to set the background color of the text, black one in our case. Then we need to set the color to white, set the big font and using the print() function, we will print the string “Arduino TFT Tutorial” at the center of the screen and 10 pixels  down the Y – Axis of the screen. Next we will set the color to red and draw the red line below the text. After that we need to set the color back to white, and print the two other strings, “by HowToMechatronics.com” using the small font and “Select Example” using the big font.

In order the code to work and compile you will have to include an addition “.c” file in the same directory with the Arduino sketch. This file is for the third game example and it’s a bitmap of the bird. For more details how this part of the code work  you can check my particular tutorial. Here you can download that file:

page1_btn.initButton(&tft, tft.width() / 2. , tft.height() / 2. - (1.*btnHeight + margin), 2 * btnWidth, btnHeight, WHITE, GREEN, BLACK, "SENSOR", 2);

page3_btn.initButton(&tft, tft.width() / 2., tft.height() / 2. + (1.*btnHeight + margin), 2 * btnWidth, btnHeight, WHITE, GREEN, BLACK, "PARAMETER", 2);

tft.drawRoundRect(tft.width() / 2. - 1.5 * btnWidth, tft.height() / 2. - (1.5 * btnHeight + 2 * margin), 2 * btnWidth + btnWidth, 3 * btnHeight + 4 * margin, 10, GREEN);

plus_btn.initButton(&tft, tft.width() / 2. - btnWidth / 2. , 60 + 3 * 4 + 6 * 8 + (btnWidth - 30), btnWidth - 20, btnWidth - 30, WHITE, GREEN, BLACK, "+", 5);

minus_btn.initButton(&tft, tft.width() / 2. + btnWidth / 2. + margin, 60 + 3 * 4 + 6 * 8 + (btnWidth - 30), btnWidth - 20, btnWidth - 30, WHITE, GREEN, BLACK, "-", 5);

if (bColor != 255) tft.fillRect(x - nbChar * 3 * tsize - marg, y - nbChar * 1 * tsize - marg, nbChar * 6 * tsize + 2 * marg, nbChar * 2 * tsize + 2 * marg, bColor);