ebike lcd screen free sample

A clear, easy-to-read LCD screen is a vital component of any electric bike. Your LCD screen is there for both safety and convenience, and is similar to the dashboard of a car. It allows you to track your speed and battery power as you ride and tweak settings like pedal assist, throttle mode, headlights, and backlights.

For traditional bike riders making the transition to ebikes, an LCD display may initially seem confusing. However, LCD screens are simple to use once you learn the basics.

Every LCD screen is slightly different, so you should always consult your bike’s user manual to learn how to read your screen. However, the vast majority of LCD screens provide a speedometer and odometer and also track battery capacity.

The speedometer displays your current speed at all times, just like the speedometer in a car. This is an important safety feature, especially for new riders unaccustomed to an ebike’s high speeds. In some cities, ebikes may have to adhere to local speed limits, so knowing your speed at all times is important.

LCD screens also include an odometer, which displays how many miles you have ridden. Some odometers also track your time spent riding. The odometer can be reset on every ride, and Story Bike odometers also have a “total time, total mileage” feature.

Knowing your bike’s current battery capacity is also very important, especiallyfor long rides. You do not want to be left stranded without adequate battery power. Most ebike LCD screens will tell you your battery capacity the same way a laptop or iPhone would. This helps ensure you have enough battery life left to get to your destination.

LCD screens allow riders to turn certain features on and off with just a push of a button. Every LCD screen is different and controls are contingent on your bike’s specific features. Your user manual can provide more precise information.

For ebikes with pedal assist, you can usually turn pedal assist up and down as needed using your LCD screen. Story Bikes allow you to modify pedal assist with up and down arrows. The higher the pedal assist, the easier the ride. You can power assist up to level five for a steep hill and then dial it back to a one or two once you reach flat terrain.

Story Bikes also come with a feature called “walk mode.” Holding the down arrow on your LCD screen initiates the motor to cruise at three miles per hour. This allows you to comfortably walk your bike. Walk mode removes some of the physical burden of pushing by allowing your bike to keep pace with your walking speed.

If your ebike has throttle mode, throttle can typically be controlled via the LCD screen. Throttle mode is similar to how a motorcycle or motor scooter works. When throttle is powered up, it propels your bike forward at a faster pace. Like pedal assist, throttle mode can be dialed up and down as needed with buttons on your LCD screen.

Ebikes often come with built-in headlights and backlights. These are vital when riding after dark. Staying visible helps you avoid accidents with cars, pedestrians, and other cyclists. Most LCD screens allow you to turn your headlights on and off with buttons on the screen. This is a convenient feature if you’re riding in the early evening, as you can simply flip a switch and turn your lights on as the night progresses.

An LCD screen is one of the many useful tools an ebike provides. Your LCD display tracks your speed and mileage while allowing you to control key features on your bike. Every LCD screen is different, so always check your user manual for specifics.

Notes: These data are based on KM. When changing KM to Mile, the speed value on the screen would convert to correct Miles automatically, but if you do not change the setting of the speed limit from KM to Mile, it would be different from the real speed limit in Mile.

The battery life is displayed at the very top of the screen. Because it is critical in calculating the amount of charge remaining after riding. Riders of electric bikes can use their remaining battery power to assess how far they have cycled. The fading line from left to right indicates battery drain. While cycling, the battery power may fluctuate. To get an accurate assessment of how much power is left, let the electric bike immobile for roughly 30 seconds. Cyclists must pay strict attention to the battery level when riding an e-bike.

The e-odometer bike indicates the distance traveled in kilometers or miles. It is an important tool for determining a rider"s progression. Riders that have their odometer readings displayed on an LCD screen outperform their peers. The e-odometer bike"s LCD screen serves to motivate the rider. It allows users to visualize their goals and watch them come to life on the screen. Cyclists use the odometer"s journey A and B functions to generate shorter routes. Riders can use this option to separate their sports mileage from their leisure distance. The integrated tracking logging system serves as a useful daily planner.

On an LCD panel is a speedometer that measures and displays current and average speed. Riders of electric bikes can view the current, average, and maximum bike speed in kilometers per hour, one-way mileage (km), and total miles by briefly pressing the I button (km). Some e-bikes offer a walking mode that allows users to take it easy without having to stop. This feature reduces the walking rate of the electric bike, making it easier to manage the motion and go over suitable terrain.

The electricity meter, which receives the least attention of all the components on the Ebike LCD, is critical for providing riders with real-time information about their power consumption. It allows you to keep track of the watts consumed at any given time. Riders can use this information to alter the kinetic parameters based on their battery assumptions.

Pedego electric bikes are equipped with an LCD console that monitors your pedal assist level, speed, odometer, trip distance, riding time, and battery energy level. If you have purchased your electric bicycle from a Pedego dealer or via the official Pedego website, your ebike will arrive with all the correct LCD console settings, such as km/hr settings and a maximum motor speed of 32 km/hr. In this article, we list the different numbers and symbols, what they mean, and how to change certain settings on your electric bike.

It’s easy to turn the LCD console on. First, make sure the battery is fully inserted and the on/off switch is in the on or [I] position. Then press the power button (top button) on the four button selector located near the left grip on the handlebars. To turn off the LCD screen completely, press and hold the power button for three seconds. The console will also automatically turn off after five minutes of bike inactivity.

When the main screen first comes on, you’ll see five different things. In the top left corner there’s one horizontal bar – this fluctuates up and down while you ride and shows the amount of energy being drawn from the battery at any given moment. While resting, though, this area of the screen only shows one bar. The other things you’ll see are the speedometer (top right corner), the battery indicator, the pedal assist number on the left and, depending on your setting, you’ll either see the odometer counter indicted by “ODO,” the trip odometer (“TRIP”) or riding time indicator (“TIME”). To scroll between these three values press the “SET” button while in the main screen. This is what each indicates:

Pedal Assist Number: The large number on the left of your screen. The higher the number, the more energy the motor is exerting to propel you forward while you pedal. On most Pedego bikes there are 6 levels of pedal assist. In Level 0 the motor will not be activated by either throttle or pedal assist for most Pedegos. Levels 1-5 give you increasing levels of power (and top motor-assisted speed) while pedalling. Note that in these levels, the throttle acts as an override and can be activated to increase the power temporarily up to the maximum km/hr speed as required. Level 6 is a throttle-only setting and pedalling does not activate the motor. Pedal assist power can be adjusted while riding: simply hit the plus [+] button to increase power or the minus [-] button to decrease the amount of power the electric motor is applying to the wheel when you are pedalling.

To turn on the screen’s backlight as well as the integrated front and rear lights on your Pedego, once the LCD screen is on, simply press the power button and the lights will come on. Press it once again to turn them off. (Pressing the power button for longer than three seconds will turn the entire LCD unit off.)

There are other functions your LCD console can perform. By pressing and holding the “SET” button for a couple of seconds, located just below the power button, you’ll enter the programming menus. Here are the explanations for each screen and how they function.

After you’ve powered on the LCD screen, hold the “SET” button for two seconds. The screen will become backlit and you can release the button. You’ll see the number 1 in the bottom left corner. You’ll also see the trip odometer figure and here is where you can reset it back to zero by simply pressing the minus [-] button. This is useful to determine how long a particular ride is or how much battery power is used over a particular distance. To reset the trip odometer to zero, hold “SET” again for two seconds to exit the setup interface.

After pressing power, hold the “SET” button for two seconds until the screen is backlit (release at this point). Press the set button once again and you’ll see a number 2 in the bottom left corner. This is the maximum speed screen and the number you see should be 32. This means the maximum output the electric motor will do is 32 km/hr. It is the law in Canada that electric bicycle motor outputs cannot exceed 32 km/hr. If you would like to lower this maximum speed, press the minus [-] button until the desired speed appears. Hold “SET” again for two seconds to exit the setup interface.

This should have been set when you purchased the bike. After powering on the LCD screen, hold the “SET” button for two seconds. The screen will become backlit (release the button at this point) and you’ll see the number 1 in the bottom left corner. Press the set button twice, and you’ll see a number 3 in the bottom left corner. If your electric bike has 28-inch tires, the number on this screen will read 28. You can toggle between all the sizes by pressing the minus [-] button. Hold “SET” again for two seconds to exit the setup interface.

Again, if your electric bike was purchased in Canada, the LCD console will already be set to kilometres per hour. To change between MPH and KPH, power on the LCD screen and hold the “SET” button for two seconds. The screen will become backlit (release the button at this point) and you’ll see the number 1 in the bottom left corner. Press the set button three times and you’ll see a number 4 in the bottom left corner. To toggle between MPH and KPH, press the plus [+] or minus [-] button. You can also use this function to determine whether you’re eligible to receive Mile Marker pins. (Check about this with your local Pedego store!) Hold “SET” again for two seconds to exit the setup interface.

To engage the pedal assist limiter, or to turn it off, power on the LCD screen and hold the “SET” button for two seconds. The screen will become backlit (release the button at this point). Press the set button four times, and you’ll see a number 5 in the bottom left corner. When the pedal assist limiter is set to “OFF,” you’ll have a reduced top speed through all pedal assist modes. Toggle between “OFF” and “ON” by pressing the plus [+] or minus [-] buttons. Hold “SET” again for two seconds to exit the setup interface.

To engage the throttle limiter, or to turn it off, power on the LCD screen and hold the “SET” button for two seconds. The screen will become backlit (release the button at this point). Press the set button five times, and you’ll see a number 6 in the bottom left corner. When the throttle limiter is set to “OFF,” you’ll have a regulated throttle output to about walking speed. Toggle between “OFF” and “ON” by pressing the plus [+] or minus [-] buttons. Hold “SET” again for two seconds to exit the setup interface.

The LCD console also has a USB port embedded in the underside of the LCD console that allows you to charge your mobile devices. To activate the USB charger, press the plus [+] button and the SET button at the same time for 2 seconds. This will turn on the USB charging capability. Hold the same buttons again for 2 seconds to turn this feature off.

The Ebikemotion App provides an enhanced bike riding experience by using your Smartphone as the interface to your bicycle. It is fully compatible with conventional bicycles, in combination with any Ebikemotion compatible e-bike you will get extra information on your e-bike as well as on the App by the Bluetooth® connectivity integrated in the Ebikemotion components. Use the Ebikemotion App to view information about the e-bike system, plan and record activities using the navigation features, have access to maps, statistics and more!

Connect to your ride in a whole new way! Have full control of your e-bike and the Ebikemotion App with the new iWOC Controller right within thumbs’ reach. Change the active screen in the monitor, receive voice feedback, and much more!

The Ebikemotion App provides more feedback than ever before! The Ebikemotion App Monitor will display current information about your position on the map, as well as speed, location, weather forecast, music, alerts, e-bike information, etc...

Configure your STRAVA account in your user dashboard and you will be able to upload your activities directly to STRAVA by just using your Ebikemotion APP.

EVELO eBikes all include a full featured color LCD display panel right on the handlebars. This is where you will find all of the information and settings you need during your ride.

These buttons live on the left side of the handlebar and are easily accessible with your left hand while riding. This is how you turn the bike on and off, adjust your Pedal Assist settings, turn the lights on and off, and navigate through the different screens on the display.

The LCD Display Upgrade provides additional information while riding, including Speedometer, Odometer, Trip Odometer, Average Speed, Max Speed, and Pedal Assist (PAS) levels 1-4. This replaces the stock LED display on the RadRunner, RadMission, and RadExpand.

In case you didn’t notice, there’s a bike boom happening: over 1.8 million people tried our bikes and scooters for the first time last year. Ebikes are pulling a new group of riders onto active transportation by helping them get to their destination faster, and climb hills and bridges without breaking a sweat, no matter their physical ability. They’re also a sticky product for our current riders: we’ve found that once they try them, more often than not they take out an ebike whenever it’s an option. In fact, our ebikes saw two to three times as many rides per bike as our classic pedal bikes across our systems last year. There’s no signs of the bike boom slowing down...and neither are we. Enter our next generation ebike.

"Using our learnings as the largest ebike operator in North America, we set out to make the world"s best shared ebike with a beautiful modern design, industry leading safety technology, and a low carbon footprint," said David Foster, Head of Transit, Bikes and Scooters at Lyft.

Our in-house industrial design team spent the past two years developing and refining the new ebike through multiple prototypes based on feedback from a diverse group of riders to create a bike that is truly built for everyone. The next generation of Lyft ebikes is a joy to ride with a sleek form-factor, a smooth and adaptive motor, as well as improved ergonomics to accommodate a larger range of riders. The new modern design integrates personalized features with a built-in speaker system, new lighting effects and improved safety features like on-board sensors and retroreflective paint.

Intuitive:The new ebike has a seamless, single gear transmission that is tuned perfectly for all speeds and grades of road, not requiring any manual or automatic transitions.

Beacon:A powerful illuminated light ring known as the LED beacon brings even more distinct recognition and visibility to the ebike at night - similar to cars - to create our unique and recognizable light feature.

After thousands of hours of testing and tinkering, we"re just about ready to put the new ebikes into the hands of our riders. We’re beginning a public beta test on our Bay Wheels system launching next week where we will be releasing dozens into our stations for anyone to try. The public beta testing will help us understand how the bikes perform in the wild and provide learnings to our operations and maintenance teams that we can share across our markets. Once the bike is ready for the masses, we will officially begin to phase it in, starting with Divvy in Chicago later this year!

I acknowledge that Flyer™ eBikes are intended for persons 16 years of age and older and that prior to riding to always ensure riders have the physical coordination and skill to navigate the bicycle safely while managing road conditions, traffic and adhering to all laws for bicycle use.Add to Cart

With compatible accessories ranging from a Large Rear Storage Basket to a Thule® Yepp Maxi Seat , customize the storage on your longtail cargo eBike to address your unique kid & cargo needs.

We test our entire product assortment against the highest safety standards to ensure our electric bikes are best-in-class for both safety and quality. All Flyer™ eBikes meet the standards listed below:

Visibility on the Go -It’s essential for eBike riders to see and be seen while on the go. All Flyer™ bikes come with front, rear, and side reflectors and high intensity LED headlights and tail lights. When braking, the tail light is automatically activated to create awareness and enhance visibility to motorists, pedestrians, and other cyclists.

Build for Safe Riding -All components of Flyer™ eBikes undergo robust quality control inspections, and a multi-point inspection process throughout the bike assembly process ensures the highest standard of quality. In fact, every Flyer™ electric bike passes 50 quality checks on the assembly line. 100% of bikes are ride tested after assembly to ensure safe and proper function. Packaging is designed to meet the ISTA 3A standard to ensure no damage to the bike or components during the shipping process.

Our award-winning service team is here to provide the support you need to get you rolling. From mobile mechanics to 24/7 online service resources, we’re here to make loving your new eBike a breeze. Learn more about our service resources.

Running errands, grabbing groceries, and heading to the little league game with your crew in tow has never been this easy or this much fun. Explore more ways to use your bike and some of the many benefits of eBikes.

The Flyer™ L885 perfectly combines utility and adventure into one high performance vehicle for your family. Featuring a payload capacity of 400 lbs., this cargo eBike ensures you can haul it all. Transport anything from sports equipment and groceries to two kids and their belongings thanks to accessories like the Kid & Cargo Carrier and the Small Rear Storage Basket.

The Flyer™ L885 perfectly combines utility and adventure into one high performance vehicle for your family. Featuring a payload capacity of 400 lbs., this cargo eBike ensures you can haul it all. Transport anything from sports equipment and groceries to two kids and their belongings thanks to accessories like the Kid & Cargo Carrier and the Small Rear Storage Basket.

Note that the size of the bike will not impact overall storage space, running board space or accessory compatibility. Small, Medium and Large eBikes will all have these same features. Learn more about our frame sizes.

Your eBike will arrive mostly assembled. You can watch a video demonstrating the assembly process here. We also offer an assembly service for an additional cost across select locations. You can learn more about our assembly services here.

Keep in mind that our eBikes can be pedaled just like a traditional bike, but may require some additional effort as they are heavier than a traditional bike.

Your eBike has a built-in one year warranty, which warrants the following to be free of defects in materials and/or workmanship during the Warranty Period: lithium ion battery, frame, forks, stem, handlebar, headset, seat post, saddle, brakes, lights, bottom bracket, crank set, pedals, rims, wheel hub, freewheel, cassette, derailleur, shifter, motor, throttle, controller, wiring harness, LCD display, kickstand, reflectors and hardware.

Across the majority of the United States, eBikes are subject to the same rules and regulations as traditional bicycles. You should research the rules and regulations for riding an electric bike in your specific area to learn more.

Keep in mind that we also offer a 30-Day Free Trial, to make sure the eBike you choose is right for you. You can find details regarding the 30-Day Free Trial here.

Powerful, fast, easy to use, and so much fun – it’s no wonder electric bikes are the hottest two-wheel trend to hit the streets. Powered by our UL 2271 Tested Flight Speed™ Lithium-Ion battery, Flyer™ electric bicycles allow adult riders to go faster and travel farther so that you, your crew, and your cargo get where you need to go safely and efficiently. Whether you’re using your Flyer™ as a commuter bike or the family’s new favorite way to get around, Flyer™ eBikes offer a fun alternative to your traditional vehicle when venturing outdoors.

Powered by our 48V UL 2271 Tested Flight Speed™ Lithium-Ion battery, Flyer™ eBikes can travel up to 50+ miles per charge. The 500W brushless motor delivers maximum efficiency and smooth rides for adult riders.

Flyer™ eBikes are integrated with a 7-speed Shimano shifter & derailleur for easy transitions between gears and a Tektro lever brake system for powerful, on-demand braking.

Both of our cargo eBike models feature an integrated rear rack for ultimate hauling. Haul up to 80 lbs. on the rack of the Flyer™ M880 and up to 150 lbs. on the rear rack of the Flyer™ L885. With a range of compatible accessories available, customize the storage on your bike to address your unique kid & cargo needs.

The digital LCD display allows you to control the way you ride. On the display, riders can view the speedometer, odometer, battery charge level, pedal assist level, and light indicator.

Reimagine your on-the-go with a Flyer™ electric bike. Whether you’re heading to work, toting the kids to their next game, or grabbing groceries at the local market, your Flyer™ eBike can turn any errand, chore, or commute into an adventure.Read about 5 fun ways you can use an electric bike in your daily life.Always check & follow local guidelines when riding your electric bike.

Our award-winning service team is here to provide the support you need to get you rolling. From mobile mechanics to 24/7 online service resources, we’re here to make loving your new eBike a breeze. Learn more about our service resources.

The integrated battery and balanced frame offer excellent weight distribution. And our rear hub motor gives you a boost from behind, instead of pulling you forward. The backlit LCD screen displays speed, trip distance, odometer, and battery level.