3.2 inch tft lcd touch screen price

Fully assembled 3.2inch display with 320×240 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C4 / N2 / N2+ / C1 / C1+ / C0.

This is all-new Version V4.0 3.2 Inch TFT LCD Touch Screen for Raspberry Pi display from waveshare is big (3.2 diagonal) bright and colourful! 240320 pixels with individual RGB pixel control, this has way more resolution than a black and white 12864 display.

As a bonus, this3.2 Inch TFT LCD Screen for Raspberry Pi V4.0 display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.This display has a controller built into it with RAM buffering so that almost no work is done by the microcontroller.

This3.2 Inch TFT LCD Screen display is an alternative solution for Raspberry Pi compatible HDMI display; the 3.2 inches Resistive TFT Touch Screen Display, which uses SPI Protocol (serial peripheral interface) to communicate with the main processor. It can be mounted directly to the GPIO pins and it doesnt require any external power source.

In here we have a detailed explanation on how to install LCD drivers in a custom Raspbian image. The standard version of Raspbian does not include drivers for LCD touchscreens, so we will have to install and configure them manually.

This TFT display is 3.2" diagonal with a bright 4 white-LED backlight with a resolution of 320x240. It has way more resolution than a black and white 128x64 display. As a bonus, this display comes with a resistive touchscreen attached to it already, so you can use the stylus on the screen.

{"id":1860100849722,"title":"3.2\" inch TFT LCD 5V Expansion Shield Touch Screen with Touch Pen for Arduino","handle":"3-2-inch-tft-lcd-5v-expansion-shield-touch-screen-with-touch-pen-for-arduino","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a 3.2 inch TFT touch screen expansion board using standard Arduino Shield interface and it has good compatibility.\u003c\/li\u003e\n\u003cli\u003eIt integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy.\u003c\/li\u003e\n\u003cli\u003eWith GPRS module, you can design your Arduino phone.\u003c\/li\u003e\n\u003cli\u003eWith NFC reader module, you can create access control systems with the photos show.\u003c\/li\u003e\n\u003cli\u003eWith voltage and current sensor, you can make oscilloscope.\u003c\/li\u003e\n\u003cli\u003eCan use it directly to display characters, graphics and BMP format images. And touch controlling is available;\u003c\/li\u003e\n\u003cli\u003eCompatibility: As the SD card is connected to SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560 \/ Arduino Leonardo\u003c\/li\u003e\n\u003cli\u003eTouch screen type: resistive touchscreen.\u003c\/li\u003e\n\u003cli\u003eTouch Pen: length is 9cm;\u003c\/li\u003e\n\u003cli\u003eResolution: 240X400;\u003c\/li\u003e\n\u003cli\u003eDisplay size: 3.2 inch;\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V;\u003c\/li\u003e\n\u003cli\u003eLogic level: 5V \/ 3.3V;\u003c\/li\u003e\n\u003cli\u003eOn-board 3.3V \/ 300mA regulator circuit;\u003c\/li\u003e\n\u003cli\u003eOperating current: the maximum is 150mA\u003c\/li\u003e\n\u003cli\u003eUse the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 \/ D1 \/ D2 \/ D3 is available, please refer to the product schematics for the details.\u003c\/li\u003e\n\u003cli\u003eOnboard Micro SD slot, support Micro SD \/ TF Card;\u003c\/li\u003e\n\u003cli\u003eOnboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125"C\u003c\/li\u003e\n\u003cli\u003eVery suitable for digital photo frame, oscilloscope, function generator, detection system monitor\u003c\/li\u003e\n\u003cli\u003eSize: 9*5.3cm\/3.54\"*2.09\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Shield\u003cbr\u003e1*Touch pen","published_at":"2018-08-27T17:43:00+08:00","created_at":"2018-08-27T17:44:52+08:00","vendor":"diymore","type":"LCD Display Module","tags":["Arduino","Display","Shield","UNO R3"],"price":1399,"price_min":1399,"price_max":1399,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18399800459322,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X30543","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"3.2\" inch TFT LCD 5V Expansion Shield Touch Screen with Touch Pen for Arduino","public_title":null,"options":["Default Title"],"price":1399,"weight":30,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/1_225.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/2_740.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/3_365.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/4_536.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/5_682.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/7_161.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/6_276.jpg?v=1588654828"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/1_225.jpg?v=1588654828","options":["Title"],"media":[{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764879943,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/1_225.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/1_225.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764912711,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/2_740.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/2_740.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764945479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/3_365.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/3_365.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764978247,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/4_536.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/4_536.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678765011015,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/5_682.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/5_682.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678765109319,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/7_161.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/7_161.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678765240391,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/6_276.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/6_276.jpg?v=1588654828","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a 3.2 inch TFT touch screen expansion board using standard Arduino Shield interface and it has good compatibility.\u003c\/li\u003e\n\u003cli\u003eIt integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy.\u003c\/li\u003e\n\u003cli\u003eWith GPRS module, you can design your Arduino phone.\u003c\/li\u003e\n\u003cli\u003eWith NFC reader module, you can create access control systems with the photos show.\u003c\/li\u003e\n\u003cli\u003eWith voltage and current sensor, you can make oscilloscope.\u003c\/li\u003e\n\u003cli\u003eCan use it directly to display characters, graphics and BMP format images. And touch controlling is available;\u003c\/li\u003e\n\u003cli\u003eCompatibility: As the SD card is connected to SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560 \/ Arduino Leonardo\u003c\/li\u003e\n\u003cli\u003eTouch screen type: resistive touchscreen.\u003c\/li\u003e\n\u003cli\u003eTouch Pen: length is 9cm;\u003c\/li\u003e\n\u003cli\u003eResolution: 240X400;\u003c\/li\u003e\n\u003cli\u003eDisplay size: 3.2 inch;\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V;\u003c\/li\u003e\n\u003cli\u003eLogic level: 5V \/ 3.3V;\u003c\/li\u003e\n\u003cli\u003eOn-board 3.3V \/ 300mA regulator circuit;\u003c\/li\u003e\n\u003cli\u003eOperating current: the maximum is 150mA\u003c\/li\u003e\n\u003cli\u003eUse the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 \/ D1 \/ D2 \/ D3 is available, please refer to the product schematics for the details.\u003c\/li\u003e\n\u003cli\u003eOnboard Micro SD slot, support Micro SD \/ TF Card;\u003c\/li\u003e\n\u003cli\u003eOnboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125"C\u003c\/li\u003e\n\u003cli\u003eVery suitable for digital photo frame, oscilloscope, function generator, detection system monitor\u003c\/li\u003e\n\u003cli\u003eSize: 9*5.3cm\/3.54\"*2.09\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Shield\u003cbr\u003e1*Touch pen"}

We have over two dozen TFT LCD display modules to choose from. All of them are full-color graphic displays. Unlike standard monochrome character displays, you can create complex images for imaginative user experiences. Thin and light, these are ideal for handheld devices, communications equipment, information displays, and test and measurement equipment.

Listed by the diagonal size of the active area (the usable area for lit pixels), our TFT display sizes range from 1.3 inches to 10.1 inches. Choose from six different interfaces, many of our TFT modules have more than one interface available. Arduino users should select modules with SPI for fast and easy communications to add color graphics to their projects.

Contrast ratio is the difference between a pixel that is lit or dark. Standard STN LCD displays typically have a 10:1 contrast ratio while TFT displays are 300:1 and up, so details stand out and text looks extra sharp. For standard STN displays, you must choose a display limited to a specific viewing angle (12, 3, 6 or 9 o"clock) while TFTs can have a viewing cone greater than 160 degrees.