lcd touch screen alcatel flash plus 2 supplier

Alcatel Flash Plus 2 mobile phone repair; our experts set the standard; we are the #1 choice for replacing cracked screens or a dead battery. Got a fault? We can fix it!

After our technicians have examined your Alcatel Mobile Phone, we will verify the total costs for repair or replacement. In many cases, a repair if your protected by insurance (it might be covered) even if your Alcatel Flash Plus 2 Mobile Phone is out of warranty, a plus is customers may have the capacity to claim.

The service centre like most Alcatel Recommended Service Providers offer a quick turnaround service for many repairs, such as screen repair. If you send your Alcatel Flash Plus 2 directly to our Repair Centre our technician needs to repair it, and then we will return ship it to you, it will be ready for dispatch usually in approximately 3-10 working days dependant on parts and availability.

The Alcatel OneTouch Flash Plus sports a 5.5-inch 720p IPS screen, a 1.5-GHz octa-core MediaTek processor, 2GB of RAM, 16GB of storage, a 13-megapixel main camera with flash and an 8-megapixel selfie unit on the front.

Information about the type and size (form factor) of the SIM card used in the device.Micro-SIM (3FF - third form factor, since 2003, 15.00 x 12.00 x 0.76 mm)

GSM (Global System for Mobile Communications) was developed to replace the analog cellular network (1G), therefore it is referred to as a 2G mobile network. It has been improved with the addition of General Packet Radio Services (GPRS) and later via the Enhanced Data rates for GSM Evolution (EDGE) technology.GSM 850 MHz

Information about the process technology used in manufacturing the chip. The value in nanometers represents half the distance between elements that make up the CPU.28 nm (nanometers)

CPU is the Central Processing Unit or the processor of a mobile device. Its main function is to interpret and execute instructions contained in software applications.4x 1.8 GHz ARM Cortex-A53, 4x 1.2 GHz ARM Cortex-A53

The CPU bits are determined by the bit-size of the processor registers, address buses and data buses. 64-bit CPUs provide better performance than 32-bit ones, which on their part perform better than 16-bit processors.64 bit

The cache memory is used by the processor in order to shorten the time needed to access data and instructions that a frequently used. The L1 (level 1) cache memory has a small volume, but operates faster than the RAM and the rest cache memory levels. If the processor does not find the data needed in L1, it continues to look for it in the L2 cache memory. In some processors the search in L1 and L2 is simultaneous.256 KB + 256 KB (kilobytes)

The L2 (level 2) cache memory is slower than L1, but has a larger capacity, instead, which allows it to cache more data. Just like L1, it is much faster than the system memory (RAM). If the CPU does not find the data needed in L2, it proceeds to look for them in the L3 cache memory (if there is such) or in the RAM.2048 KB (kilobytes)

GPU is a graphical processing unit, which handles computation for 2D/3D graphics applications. In mobile devices GPU is usually utilized by games, UI, video playback, etc. GPU can also perform computation in applications traditionally handled by the CPU.ARM Mali-T860 MP2

RAM (Random-Access Memory) is used by the operating system and all installed applications. Data in the RAM is lost after the device is turned off or restarted.2 GB (gigabytes)

The display resolution shows the number of pixels on the horizontal and vertical side of the screen. The higher the resolution is, the greater the detail of the displayed content.1080 x 1920 pixels

Information about the number of pixels per centimeter (ppcm) or per inch (ppi) of the display. The higher the pixel density, the more detailed and clearer is the information displayed on the screen.401 ppi (pixels per inch)

The color depth of the display is also known as bit depth. It shows the number of bits used for the color components of one pixel. Information about the maximum number of colors the screen can display.24 bit

Information about the dimensions of the image sensor used in the device. Usually cameras with larger sensors and less pixel density tend to provide better image quality despite the lower resolution.4.82 x 3.68 mm (millimeters)

Crop factor is the ratio of the dimensions of a full frame camera"s sensor (36 x 24 mm, which equals the frame size of a 35 mm film) and the dimensions of the image sensor of the device. The number shown is the ratio between the diagonals of a full frame sensor (43.3 mm) and the sensor in question.7.14

The aperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is, hence, the more light reaches the sensor. Usually, the f-stop number specified is the one that corresponds to the maximum possible diaphragm opening.f/2

The rear cameras of mobile devices use mainly a LED flash. It may arrive in a single, dual- or multi-light setup and in different arrangements.Dual LED

One of the main characteristics of the cameras is their image resolution. It states the number of pixels on the horizontal and vertical dimensions of the image, which can also be shown in megapixels that indicate the approximate number of pixels in millions.4160 x 3120 pixels

Information about the maximum number of frames per second (fps) supported by the rear camera while recording video at the maximum resolution. Some of the main standard frame rates for recording and playing video are 24 fps, 25 fps, 30 fps, 60 fps.30 fps (frames per second)

The aperture (f-stop number) indicates the size of the lens diaphragm opening, which controls the amount of light reaching the image sensor. The lower the f-stop number, the larger the diaphragm opening is, hence, the more light reaches the sensor. Usually, the f-stop number specified is the one that corresponds to the maximum possible diaphragm opening.f/2.2

Information about the number of pixels on the horizontal and vertical dimensions of the photos taken by the front camera, indicated in megapixels as well.2560 x 1920 pixels

Wi-Fi communication between devices is realized via the IEEE 802.11 standards. Some devices have the possibility to serve as Wi-Fi Hotspots by providing internet access for other nearby devices. Wi-Fi Direct (Wi-Fi P2P) is another useful standard that allows devices to communicate with each other without the need for wireless access point (WAP).802.11b (IEEE 802.11b-1999)

Bluetooth uses various profiles and protocols related to faster exchange of data, energy saving, better device discoverability, etc. Some of those supported by the device are listed here.A2DP (Advanced Audio Distribution Profile)USB

There are several versions of the Universal Serial Bus (USB) standard: USB 1.0 (1996), the USB 2.0 (2000), the USB 3.0 (2008), etc. With each following version the rate of data transfer is increased.2.0

2G stand-by time is the longest time a battery charge will last, if the device is not used but is constantly connected to the 2G cellular network.500 h (hours)

Information about the electric current (amperes) and voltage (volts) the charger outputs. The higher power output allows faster charging.5 V (volts) / 2 A (amps)