plasma vs lcd screen in stock

If you"re in the market for a flat-screen television, then you probably have one big question you want answered: plasma vs. LCD; which one is right for you?

The two different camps of flat-panel display standards will, of course, gladly spruik the advantages of their own standard and the deficiencies of the other. But what type of display — plasma or LCD — is actually better? And which will give you more bang for your buck?

Plasma and LCD panels may look similar, but the flat screen and the thin profile are where the similarities end. Plasma screens, as the name suggests, use a matrix of tiny gas plasma cells charged by precise electrical voltages to create a picture. LCD (liquid crystal display) screens are in layman"s terms sandwiches made up of liquid crystal pushed in the space between two glass plates. Images are created by varying the amount of electrical charge applied to the crystals. Each technology has its strengths and weaknesses, as you"ll read below.

It"s not what"s happening behind the screen that"s important — it"s how the screen performs as a television that matters the most. In that regard, both plasma and LCD TV sets produce excellent pictures, and the differences between them aren"t as pronounced as they used to be. While the latest plasmas are particularly good, LCD sets are quickly catching up in terms of quality, with advances like LED backlighting.

For basic home cinema-like usage, plasma screens have a slight edge over LCDs. This is because plasma screens can still display blacks more accurately than LCDs can, which means better contrast and detail in dark scenes. The nature of LCD technology, where a backlight shines through the LCD layer, means that it"s hard for it to achieve true blacks because there"s always some light leakage from between pixels. As LCD/LED technologies such as polarising filters and dynamic backlights improve, the quality gap between the technologies grows narrower.

Apart from better contrast due to its ability to show deeper blacks, plasma screens typically have better viewing angles than LCD. Viewing angles are how far you can sit on either side of a screen before the picture"s quality is affected. You tend to see some brightness and colour shift when you"re on too much of an angle with LCDs, while a plasma"s picture remains fairly solid. Plasmas can also produce richer, more natural colours, due to both light leakage and to a limit on the hues that LCD can reproduce.

Plasma pundits will also tell you that some LCD screens have a tendency to blur images, particularly during fast-moving scenes in movies or in sport. While that was true for older generation LCD screens, newer models have improved significantly — so much so that the differences in performance between LCDs and plasmas in this regard is almost negligible. (While the pixel response time, measured in milliseconds (ms), can give you some indication of an LCD"s performance with fast-moving scenes, it"s not always reliable.)

Traditionally, the biggest advantage that plasmas have had over their LCD cousins is price, particularly in the large screen end of the market. Depending on the resolution, plasma is still able to beat most equivalently priced LCD screens. Plasmas currently sold in Australia generally run between 42 and 65 inches wide, with the cheapest 1024x768 standard-definition 42-inch selling for under AU$1000.

At present, the mainstream plasma size is 50 inches, but sizes of 60 inches and above are becoming more common. At these sizes, plasmas tend to be two thirds or less than the price of the equivalent LCD, due to the high manufacturing cost of LCD panels.

Apart from becoming increasingly price-competitive, LCD has the edge over plasma in several other key areas. LCDs tend to have a higher native resolution than plasmas of similar size, which means more pixels on the screen.

LCDs also tend to consume less power than plasma screens, with some of the newer "Eco" LCD panels able to use half of the power than equivalent plasmas, with the trade-off being lower brightness.

In terms of bulk, LCDs are also generally lighter than similar-sized plasmas, making it easier to move around or wall-mount. This is because LCDs use plastic in their screen make-up, whereas plasmas tend to use glass.

LCD pundits point to the belief that LCDs have a longer lifespan than plasma screens. While this may have been true of earlier plasma models — which dropped to half-brightness at 20,000 hours — many modern plasmas have the same 60,000-hour lifespan as LCDs. This means that both types of TVs will last for almost seven years if left on 24 hours a day.

You might have also heard that plasmas suffer from screen burn-in, an affliction not commonly associated with LCDs. Screen burn-in occurs when an image is left too long on a screen, resulting in a ghost of that image "burned in". Newer plasmas are less susceptible to this, thanks to improved technology and features such as screensavers, but burn-in can still be a problem. However, after a few days most burnt-in images will fade — they are no longer permanent.

If you"re in the market for a big-screen television — and we"re talking 50 inches and above — then we"d suggest plasma as a safe bet. Plasmas give you more bang for your buck at the big end of town, and while LCDs can give you better resolution, plasma still has the edge in terms of picture quality.

At the smaller end of things (17- to 42-inch TVs), LCD is the only way to go if you want something slim and tasteful. And the best thing is that LCDs are getting cheaper all the time.

There has also been a lot of debate surrounding use in bright environments versus dark, cinema-like conditions. The traditional wisdom is that LCD performs better during the day due to its backlighting system, and that plasma works best in a dark environment, as it uses a glass front. Nonetheless, products like the non-reflective glass plasmas and LED-backlit LCD panels with their better blacks completely turn this logic on its head.

In the past couple of years, several new features have cropped up, but the most pertinent to this discussion is 3D. While it"s possible to manufacture a 3D screen with both LCD technology and plasma, based on our extensive testing, a plasma screen is the best at producing 3D images and reducing the artefact known as crosstalk, or ghosted imaging. Be aware that there is still very little content available in 3D, and that the technology is still evolving. Buy a set for its 2D abilities first, and then consider 3D.

While most screens are now full high-definition (1080p), resolution is a consideration when you"re looking at budget screens. Budget LCDs and plasmas feature either 1366x768 or 1024x768 (720p) resolutions. If you"re buying a screen that"s 42 inches or larger, though, there"s now no reason to get anything less than 1080p.

It isn"t all about the resolution, however; it"s not the pixels, it"s what you do with them. Most modern TVs, and even budget ones, will accept a 1080p input, and it depends on the quality of the scaler on-board as to how good a picture you"ll get. The big names — Panasonic, Sony, Samsung and LG — usually have very good image processors that can resize the source content — whether it"s DVD, Blu-ray or

Plasma TV production ended in 2015. However, they are still being used and sold in the secondary market. As a result, it"s helpful to understand how a Plasma TV works and how it compares to an LCD TV.

Within each cell, a narrow gap that contains an insulating layer, address electrode, and display electrode, separates two glass panels. In this process, neon-xenon gas is injected and sealed in plasma form during the manufacturing process.

When a Plasma TV is in use, the gas is electrically charged at specific intervals. The charged gas then strikes red, green, and blue phosphors, creating an image on the screen.

Each group of red, green, and blue phosphors is called a pixel (picture element — the individual red, green, and blue phosphors are called sub-pixels). Since Plasma TV pixels generate their light, they are referred to as "emissive" displays.

Plasma TVs can be made thin. However, even though the need for the bulky picture tube and electron beam scanning of those older CRT TVs is not required, Plasma TVs still employ burning phosphors to generate an image. As a result, Plasma TVs suffer from some of the drawbacks of CRT TVs, such as heat generation and possible screen burn-in of static images.

LCD crystals do not produce light, so they need an external source, such as fluorescent (CCFL/​HCFL) or LEDs, for the picture created by the LCD to become visible to the viewer.

Unlike a Plasma TV, since there are no phosphors that light up, less power is needed for operation, and the light source in an LCD TV generates less heat than a Plasma TV. There is no radiation emitted from the screen.

Plasma TVs are more vulnerable to burn-in of static images. However, this problem diminished over the years due to "pixel orbiting" and related technologies.

Potentially shorter display lifespan. Early models had 30,000 hours or 8 hours of viewing a day for nine years, which was less than LCD. However, screen lifespan improved and 60,000-hour lifespan rating became the standard, with some sets rated as high as 100,000 hours, due to technology improvements.

Not as good at tracking motion (fast-moving objects may exhibit lag artifacts). However, this has with the implementation of 120Hz screen refresh rates and 240Hz processing in most LCD sets, but that can result in the "Soap Opera Effect," in which film-based content sources look more like a videotape than film.

Narrower effective side-to-side viewing angle than Plasma. On LCD TVs, it is common to notice color fading or color shifting as you move your viewing position further to either side of the center point.

Although LCD TVs do not suffer from burn-in susceptibility, single pixels can burn out, causing small but visible, black or white dots to appear on the screen. Individual pixels are not fixable. Replacing the whole screen is the sole option if the pixel burnout becomes unbearable.

An LCD TV was typically more expensive than an equivalent-sized (and equivalent featured) Plasma TV. However, that is no longer a factor, since companies have ceased manufacturing Plasma TVs.

Manufacturers chose to incorporate 4K resolution only in LCD TVs, using LED back and edge-lighting, and, in the case of LG and Sony, incorporating 4K into TVs using OLED technology.

Although it was possible to incorporate 4K resolution display capability into a Plasma TV, it was prohibitively expensive. When the sales of Plasma TVs started declining, TV makers decided against bringing consumer-based 4K Ultra HD Plasma TVs to market, which was another factor in their demise. The only 4K Ultra HD Plasma TVs manufactured were for commercial application use.

Plasma TVs contain tiny pockets of gas, and when a voltage is applied to them, they turn into a plasma state. The voltage then strikes the mercury within the plasma to emit ultraviolet (UV) rays, which pass through phosphor cells to produce an image. Each pixel in the TV contains three phosphor cells: red, green, and blue, and these three colors combine to produce a color. Essentially, plasma TVs don"t require a backlight, and each pixel is self-emissive as it produces its own light.

Unlike plasma TVs, LCD TVs use a backlight. Initially, LCD TVs used Cold-Cathode Fluorescent Lamp (CCFL) as their backlight. These are long tubes that are placed horizontally across the screen behind the LCD panel. When the light is turned on, it applies a voltage to the pixels, which makes them rotate a certain way to allow light through and produce an image. When it wants to display black, the pixels are rotated to create an opaque screen so that light doesn"t get through. This is what makes them different from plasma TVs because each pixel isn"t self-emitting.

Light-Emitting Diode (LED) TVs are the same as traditional LCD TVs, but instead of using CCFL backlights, they use many smaller LED lights. It produces an image the same way as a regular LCD TV because it still uses an LCD panel, but it has more control over the backlighting. The LEDs can be placed along the edges, which is called edge-lit LED, or all over the back panel, which is either called direct LED or full-array backlighting. You can see the differences between LCD and LED TVs below.

It"s also important to note LED is simply a marketing term used by manufacturers to describe their backlight. They"re still technically LCD TVs, but since calling them LED is so common now, we even label them as LED, and we"ll continue to do so throughout this article.

Plasma and LED TVs each present their own advantages and disadvantages in terms of picture quality, price, build, and availability. It"s generally thought that plasma produces a better picture quality due to their superior contrast ratio, but LED TVs became more popular because of other factors, like a lower cost and greater availability.

Below you can see the differences in picture quality between two older TVs from 2013. It"s clear the plasma was better at the time, but LED TVs have also gotten better since then, so picture quality has greatly improved.

Contrast ratio was one of the main advantages and selling points of plasma TVs. Since each pixel emitted its own light, it simply turned itself off when it wanted to display a black image. This allowed the TV to display very deep blacks, but because there was always a bit of charge left in the plasma, it still wasn"t a perfect black level.

On the other hand, LED TVs can"t achieve a perfect black level because the backlight is always on. However, technology has evolved to greatly improved the contrast of LED TVs, even to the point where it"s also as good as what plasma once was. There are two main types of LCD panels in TVs: Vertical Alignment (VA) and In-Plane Switching (IPS). VA panels produce a better contrast than IPS, and high-end TVs also have local dimming features that turn off certain zones of the LED backlights. Still, you won"t get a perfect black level, but most modern LED TVs produce such deep blacks that even in a dark environment it looks like perfect black levels. For reference, plasma TVs had a max contrast of about 4,000:1, according to DisplayMate.com, but some recent LED TVs can reach a contrast of over 20,000:1 with local dimming enabled, like the Samsung QN90A QLED.

LED TVs are a clear winner here, and it"s one of the reasons why they surpassed plasmas in terms of popularity. LED TVs get significantly brighter, so they can fight glare from light sources easier. Additionally, plasma TVs had to use glass on their front panel, which caused intense glare if you had any lamps or windows around the TV. LED TVs can use a coating on their glass panel to help reflect and diffuse light, making it a better choice for well-lit rooms.

Plasmas were designed for dark-room viewing, but since most people don"t have dedicated home theater setups and often watch with a few light sources around, they weren"t that useful. As you can see below, the plasma TV had pronounced reflections, to the point where it"s even hard to see the image, and instead you"re watching yourself watch TV. Reflections are still noticeable on an LED TV, but at least you can see the image.

Pixels on plasma TVs emitted light in all directions, creating extremely wide viewing angles, much better than most LED TVs. This means that the image remained accurate when viewing from the side, which was great for watching sports or a show with a few people. Out of the two main panel types for LED TVs, IPS has wider viewing angles than VA panels, but it"s still not as good as plasma.

TV manufacturers have tried different technologies to improve viewing angles on VA panels. Samsung has an "Ultra Viewing Angle" layer, and Sony uses their "X-Wide Angle" technology to increase the viewing angles, both at the cost of a lower contrast ratio. It"s still not as good as plasma, but they"re wide enough for watching TV in a fairly large seating area.

Below you can see the differences in viewing angles between a plasma and a VA panel. These TVs were tested on different test benches, so you shouldn"t directly compare the videos, but we included them to give you an idea of how each technology affects the viewing angle.

Plasma TVs were great for motion handling, like with sports and video games due to their quick response time. Since each pixel had to retain a certain charge at any given moment, it was ready to display an image almost instantly. This meant fast-moving scenes looked crisp and smooth, with no motion blur behind them. However, for LED TVs, it can be a toss-up; some lower-end models have a slow response time that causes motion blur, while other high-end TVs have a really fast response time.

Some LED TVs also use Pulse Width Modulation to dim their backlight, and this causes the backlight to flicker, which may create image duplication in fast-moving scenes. This can be particularly annoying, especially if you"re watching sports with fast-moving content.

In terms of refresh rate, plasma TVs had a higher internal refresh rate, up to 600Hz, while LED TVs tend to be 60 or 120Hz. However, the refresh rate depends on the content, and since most content doesn"t go past 120 frames per second, having a higher refresh rate TV isn"t very useful.

Screen uniformity is another area where plasma TVs win. Since they didn"t have a backlight, they could evenly control each pixel. LED TVs can suffer from uniformity issues, like darker edges or Dirty Screen Effect in the center, because the backlight output may not be even across the panel. However, this is only really noticeable when watching content with large areas of uniform color, like a hockey or basketball broadcast, or if you"re going to use the TV as a PC monitor. It shouldn"t be noticeable with other types of content, and since uniformity can vary between units, you shouldn"t worry about it too much.

One of the reasons plasma TVs didn"t last too long at the top of the TV world is because of their risk of temporary image retention and permanent burn-in. Plasmas lose their brightness over the years, and in the worst case, would have permanent burn-in with certain colors staying on the screen, as you can see here. Even after watching content with static elements, like the news, for an extended period, the outline of the static elements would stay on the screen for a few minutes after changing the channel.

These problems are particularly annoying, especially if you watch a lot of TV. There was no way to help reduce this issue, and after a few years, depending on how much you used the TV, your plasma would need replacing. LEDs don"t suffer from this same permanent burn-in, so you won"t have to worry about replacing your LED TV down the line because of burn-in.

Due to their different technologies, LED and plasma TVs are built differently. Plasma TVs tended to be heavier and thicker because the panel itself was larger. Although plasmas were the first flat-screen TVs available at a consumer level at the end of the 20th century, LCD TVs quickly became even thinner, easier to package, and lighter to carry from the store to your house. These days, LED TVs are as thin as 1", like the Samsung QN85A QLED.

Plasma TVs also required a lot of power to work and tended to get very hot. With the growth of environment-friendly consumer practices, it became clear LED TVs would win out since they required a lot less electricity, and in a way were better for the environment.

Both plasma and LED TVs were made with larger sizes, but LED had a slight advantage because they were also made in displays smaller than 32 inches, like with monitors. Although small TVs are rare now, you can still find a basic 28 or 32 inch TV for a kitchen or bedroom with an LED panel. Plasma TVs weren"t made that small. LED TVs also cost less to produce and are cheaper on the market, so at the end of the day, the lower cost drove LED sales.

When 4k TVs started to become the norm over 1080p and 720p TVs in the mid-2010s, manufacturers started to produce 4k LED TVs, while plasma TVs were stuck at 1080p. This presented a major advantage for LED TVs, as a higher resolution helps create a crisper image, and this essentially was the nail in the coffin for plasma TVs. Since manufacturers were focused on making 4k LED TVs, plasma TVs became less available, and by 2014, Panasonic, LG, and Samsung all stopped their plasma production. LED TVs surpassed plasma sales in 2007, and they haven"t looked back since.

There were a few other problems that contributed to the decline of plasma TVs. First of all, plasma TVs didn"t work at high altitudes because of the change in air pressure with the gasses inside. They would create a buzzing noise, and the image wouldn"t look the same, so this could have been problematic if you lived at a high altitude. LED TVs can be used at any altitude; you shouldn"t use them in extreme cold or extreme heat, but this is standard practice for any electronic, and temperature is easier to control than your altitude. Also, plasma TVs emitted a radio frequency that could have interfered with other devices around, like if you had a radio in the same room. Each of these issues are simply inconvenient for most people.

The simple answer is yes, but it doesn"t mean you should go out tomorrow and buy a new TV just because you read this article. If you aren"t experiencing any issues with your plasma, then you probably don"t need to replace it right away. However, if you notice your plasma is starting to show some signs of permanent burn-in, it"s probably a good idea to get a new TV before the burn-in becomes worse.

There could be other advantages if you upgrade your TV, like technological advancements and a higher 4k resolution. Modern TVs come with a built-in smart system, which isn"t something that most plasmas had, and this allows you to directly stream your favorite content without the need for an external streaming device. As mentioned, LED TVs aren"t very costly, and you can easily find the best 4k TVs for under $500.

At the same time that plasma TVs met their end, OLEDs grew from the ashes of their predecessor. After LG released the first commercially available 55 inch OLED in 2012, it soon competed with LED TVs. OLED, which stands for Organic Light-Emitting Diode, is different from plasma, but shares many of the same characteristics, while also avoiding some of plasma"s downfalls.

OLEDs use self-emissive pixels, but what sets them apart is how the pixels completely shut off, creating an infinite contrast ratio and perfect black uniformity. This is an improvement from plasma because it was never able to reach those perfect blacks. OLEDs also have wide viewing angles and a near-instant response time like plasmas. Sadly, they don"t get extremely bright, but they"re still better for well-lit rooms than plasma because they get a bit brighter and have much better reflection handling. Also, OLEDs have the same burn-in risk as plasma, but this only happens with constant exposure to the same static elements, and we don"t expect it to be a problem for people who watch varied content.

Another advantage for OLED is how thin they are, especially compared to plasma, and they aren"t as heavy. For example, the LG GX OLED is a TV designed to sit flush against the wall and it"s only 0.94" thick!

Compared to LED competitors, OLEDs are much more costly, and even though they offer superior picture quality, LEDs are still the favorite. Also, LED TVs are available in smaller sizes, while the smallest OLED TV we"ve tested is 48 inches. LEDs are generally the better choice for well-lit rooms since they still get much brighter, but OLEDs are a fantastic choice for dark room viewing.

Although plasma TVs once dominated the TV market for a short time at the turn of the 21st century, their disadvantages outweighed their advantages, and LED-backlit LCD TVs soon held the market share of sales. There were a few reasons for this, like burn-in issues, low peak brightness, and a thick and heavy design compared to LED TVs. Despite plasma TVs" superior overall picture quality, improved contrast, and very quick response time, it wasn"t enough to convince consumers to keep buying them once 4k LED TVs became readily available. If you still have a plasma, it"s likely you"ll need to replace it within the next few years, and you"ll probably buy a new LED TV.

Plasma screens contain tiny pockets of gas that get excited when voltage is applied to them, turning them into a state of plasma. In that state, the voltage then strikes electrons of mercury, turning them into ultraviolet (UV) light, which isn"t visible to the human eye. The UV light then passes through phosphor cells; each pixel contains red, green, and blue phosphor cells. Thanks to these phosphor cells, the TV can turn the UV light into colors that are visible on the light spectrum. Essentially, plasma TVs don"t require a light, and each pixel is self-emissive, so how one pixel displays itself is independent of the next pixel.

The pixels aren"t excited continuously, but in short pulses, and some plasma TVs can pulse up to 600 times every second. The naked eye perceives this as flickering, and some people are very sensitive to this. There can also be some advantages to this; since each pixel holds a certain charge, it"s ready to turn on and off as needed, resulting in minimal motion blur. This means that fast-moving content, like in sports or video games, appears smooth.

One of the downsides of plasmas was how they suffered from occasional image retention if they displayed the same image for a long period. So if you watched the news for about an hour, with all of its static displays, then switch channels, you"d still see the outline of the static elements. Eventually, they disappeared, but it could have been particularly annoying. Also, after several years in use, plasmas suffered from permanent burn-in. This happened when the phosphor cells simply stayed stuck in one color and couldn"t display any colors. Unfortunately, there was no way to avoid eventual burn-in, and almost every plasma TV suffered from it.

OLED TVs have similar characteristics to plasmas with their infinite contrast ratio, wide viewing angles, near-instant response time, and to a lesser extent, the risk of permanent burn-in. Since 2012, they"ve replaced plasma as a competitor to LCD TVs, and to learn more about OLEDs and how they differ from LCD TVs, see here.

An LCD screen is composed of two parts: the actual liquid crystal display and a light source at the back of the screen (called backlight). A light diffuser is placed between the backlight and the LCD screen to make the source of light uniform across the screen.

The LCD panel doesn"t emit light by itself, and this is why it needs a backlight; it only acts as a filter to block the light on a per-pixel basis. The backlight is always on, and the pixels in the display rotate to allow light through, creating the colors needed for the image. If the screen wants to display black, the LCD pixels rotate to try to block the light completely. If it wants to display white, it lets all light through. Since the display is only a filter, the blacks will not be as deep as with a plasma screen because an LCD panel will always let a small portion of light through.

There are different types of LCD panels, each with its unique characteristics. Vertical Alignment (VA) panels generally have a high contrast ratio and narrow viewing angles, while In-Plane Switching (IPS) panels have a low contrast ratio with wide viewing angles. You can read about their differences here.

By using a backlight, LCD TVs use much less power than plasmas, which you can read about here. Also, LCD TVs tend to get much brighter than plasmas, making them more suitable for well-lit rooms. There are two main types of backlights used in LCD screens: CCFL and LEDs.

When someone refers to an LCD TV, they usually mean a Cold-Cathode Fluorescent Lamp (CCFL) backlit LCD screen. The first LCD TVs were lit by CCFLs, but they"re extremely rare as of the start of the 2020s. The backlight is a series of light tubes placed behind the screen. These tubes are very similar to fluorescent lamps used in buildings but smaller.

CCFL-backlit LCD TVs were eventually replaced by LED TVs because they cost less, were made thinner, and required less power. Also, LED TVs have more control over their backlight, resulting in vivid colors and better picture quality.

An LED (Light-Emitting Diode) screen is an LCD screen, but instead of having a normal CCFL backlight, it uses LEDs as the source of light behind the screen. Companies label their TVs as LED, even though they"re technically LCD; it can be confusing at times, but if you see an LED TV, you know it has an LCD panel. These TVs are more energy-efficient and a lot smaller than CCFLs, enabling a thinner television screen.

In a full-array LED screen, the LEDs are distributed evenly behind the entire screen. This produces a more uniform backlight and provides more effective use of local dimming, where it can turn off and dim complete zones of LEDs.

With an edge-lit LED screen, the LEDs are placed at the edges of the screen. Depending on the display, it can be all around the screen, on the left and right sides, or at the top and bottom. This allows the screen to be very thin.

However, it can cause some spots on the screen to be brighter than others, like the edges. This problem is called flashlighting or clouding. It can be seen when watching a dark scene in a dark environment. Also, edge-lit screens usually don"t result in good local dimming as they don"t have control over the dimming zones.

Like the full-array method, the LEDs are directly behind the screen. However, there are very few of them, and they can"t be controlled separately to match the luminosity of the picture.

As TV companies attempt to improve their technology, a new type of LED backlighting has emerged: Mini LED. It uses the same traditional LED backlighting behind an LCD panel, except the LED lights are even smaller. This allows for more lights, creating a brighter image and more control over local dimming. Only a handful of Mini LED TVs were produced before 2021, but it now seems that manufacturers are starting to use the technology more often. The Samsung QN90A QLED is an example of a Mini LED TV.

Another technology, Micro LED, is only in its initial phases of development. This doesn"t even have an LCD panel as each LED pixel is self-emissive, similar to OLEDs, but without the burn-in risk. Currently, there aren"t any Micro LED TVs available at the consumer level; Samsung has produced large Micro LED TVs (over 100 inches), and they"re very expensive. However, we may begin to see Micro LED technology in the consumer TV market soon.

Plasma and LCD each present advantages and disadvantages when it comes to picture quality. Plasma TVs generally offer better contrast, wider viewing angles, and improved response times, while LCD TVs get much brighter and have better reflection handling. LCDs also cost less and can be much thinner, which are two of the main reasons why they took over the market share from plasmas in the mid-2000s. Plasma TVs are now extinct, and although OLEDs share many of the same characteristics, LED-backlight LCD TVs are now the norm, and it"s likely your next TV purchase will have an LCD panel.

Contrast ratio is a measure to compare the darkest black with the whitest white. Plasma TVs score well on this parameter with a contrast ratio of up to 3000:1. LCD TVs have a contrast ratio of up to 1000:1; however, this metric is calculated differently for LCDs so it"s not an apples-to-apples comparison. Plasma TVs, in general, offer a better contrast than LCDs.

Older models of Plasma TVs can suffer from burn-in produced by static images. After extended periods, stationary images "burn in" the screen and produce an after-image ghost which remains permanently on the screen. This no longer affects new Plasma displays, as they continually shift the image around to prevent the image from being stationary.

LCD TVs do not suffer from burn-in. However, it is possible for individual pixels on an LCD screen to burn out. This causes small, visible, black or white dots to appear on the screen.

Plasma TVs are capable of displaying deeper blacks. Improved black levels help render better those difficult-to-define quality attributes like picture depth, scene detail - especially in television and movie scenes where lots of dark and light content is shown simultaneously, and color richness. Indirectly, a better black level also leads to better rendering of picture contrast.

In comparison, the nature of LCD technology – where a backlight shines through the LCD layer – makes it hard for it to achieve true blacks, i.e. true absence of light. There is always some light leakage from adjacent picture elements in an LCD panel.

LCD TV displays reproduce colours by manipulating light waves and subtracting colours from white light. This makes it more difficult for maintaining colour accuracy and vibrancy. But, LCD TVs have colour information benefits from the higher-than-average number of pixels per square inch found in their displays.

In plasma TVs, each pixel contains red, green, and blue elements, which work in conjunction to create 16.77 million colours. Colour information is more accurately reproduced with plasma TV technology than it is with any other display technology, including LCD TVs.

Plasma TV displays refresh and handle rapid movements in video about as well as normal CRT TVs. LCD TVs were originally designed for computer data displays, and not video. Refresh rates are therefore not as good, but LCD TVs are fast catching up.

LCD TVs life span is typically 50,000-60,000 hours, which equates to about 6 years of 24/7 use. However, LCD TVs will actually last as long as its backlight does, and those bulbs can be replaced - so in essence there"s nothing which can wear out.

The life span for Plasma TVs is 25,000 to 30,000 hours, which equates to about 3 years of 24/7 usage before the TV fades to half the original brightness.

Plasma TVs do not use Mercury while LCD TVs do in their CCFL backlight. However, this issue is a red herring. Most common high-efficieny phosphorescent lamps use mercury and it is not a big deal. The amount of mercury used in LCD TVs is very small and besides, the user never comes in contact with it.

Most electronics retailers carry both LCD and Plasma TVs, including Best Buy, Amazon.com, Wal-Mart, Dell, Target, P.C. Richard & Son, Sears, Costco and hhgregg.com.

LED HDTVs (properly known as LED-backlit LCD TVs) use light emitting diodes (LEDs) as a backlight for the LCD. Some of this light is blocked by vertical or horizontal liquid crystals, creating an image. These should not be confused with actual LED or OLED TVs.

Plasma HDTVs create images using phosphors, tiny plasma containers placed between two sheets of glass. These emit ultraviolet light at colored spots of phosphor on the screen, which then glow to create the picture.

Plasma TVs tend to have deeper blacks, and stabler color over the screen"s breadth from a variety of angles, leading to smoother, more natural images than seen on LED-lit LCD screens. Plasma screens also show crisp, fast motion without blur or ghosting.

According to CNET, LED-lit LCD TVs are the brightest available. They are capable of 100 footlamberts, although this is bright enough to cause eye fatigue in a dark room. Plasmas are less bright, so they might be more difficult to see in a bright room, and will dim over time.

Plasma screens normally range from 42 inches to approximately 65 inches. Panasonic also offer some larger models, including a 152 inch TV. Plasma screens also weigh more than LED-lit LCD screens.

Plasma TVs are less energy efficient than LED-lit LCD TVs. According to Which magazine, a 42 inch screen LED-lit LCD TV will use an average of 64 watts, while an average 42 inch Plasma TV uses 195 watts.

HDTVs are generally highly reliable. LED-lit LCD TVs are considered to have a lifespan of 100,000 hours, although they have not been in use long enough to have extensive information on their long-term reliability.

According to PC World, users of Panasonic’s plasma TVs rate them highly reliable, with very few serious problems. In 2010, just 1 in 20 Panasonic users reported a major problem with their TVs. Older plasma TVs have a lifespan of 20,000 hours, although some newer TVs have up to 60,000 hours.

LED-lit LCD TVs are typically more expensive than Plasma TVs. For example, on Amazon.com a Panasonic LED-lit LCD 42 inch TV was listed for $900 while a Panasonic Plasma 42 inch TV costs $600.

LCD screen TVs are the most popular, followed by LED-backlit screens (which are also LCD screens, by the way). Plasma screens are less popular and more commonly available in larger sizes.1,274 LCD TVs

All major TV manufacturers sell LED-lit LCD TVs. Panasonic focuses its TV range on the Plasma TV, while other brands, such as LG and Samsung, only produce a few models, and some, such as Sony and Toshiba, no longer produce Plasma TVs at all.

OLED and plasma displays output their own light, which allows them to produce true blacks, whereas LCDs rely on their backlight which makes blacks look grayish in comparison unless there’s local dimming.

Plasmas were quite popular due to their incredible picture quality with true blacks, as well as a rapid response time speed. However, they also suffered from having a too reflective screen, which washed out the colors in very bright rooms.

Although LCD TVs can’t produce deep blacks like plasma TVs, they slowly replaced them as they were a lot cheaper to make and had a much thinner design.

Similar to plasmas, OLED TVs and monitors are capable of producing true blacks for life-like picture quality. Besides, they have impeccable viewing angles, meaning that the picture doesn’t shift in color and contrast when the display is viewed at skewed angles.

Modern OLED TVs have various software, such as screen savers and pixel refreshers, to deal with image retention and burn-in, while a dedicated Game Mode provides responsive gameplay with minimal input lag.

The older models were backlit by cold cathode fluorescent lamps (CCFL), but nowadays, all modern LCDs have a mini LED or LED backlight, which requires less power and also allows for the display to be even thinner.

QLED TVs, popularized by Samsung, are based on quantum dot technology, which further enhances the image quality of the display. Though the term ‘QLED’ may sound misleading, these TVs aren’t OLED, but rather regular LED TVs with a quantum-dot enhanced film layer.

While QLED displays can be brighter than OLED, many prefer the infinite contrast of the latter, and since both types of these high-end TVs cost roughly the same, OLED is usually more favorable at this time.

Some LED displays feature local dimming as the means to compensate for the limited contrast and grayish blacks. This feature basically dims parts of the screen that are supposed to be dark, without affecting bright areas.

In some high-end LCDs, this can do wonders for the image quality, but if the local dimming is poorly implemented, it can also cause undesired defects, such as halo and bloom.

Finally, modern OLED and LED-backlit LCD TVs offer a high screen resolution. 4K or Ultra HD makes the picture incredibly crisp and sharp in comparison to the standard 1080p HDTVs.

Generally, OLED and QD-OLED displays are better for viewing in a dark room due to their infinite contrast ratio, while mini LED LCDs are preferred for bright room viewing thanks to their stellar peak brightness.

For gaming, there are a lot of additional things to consider, such as screen size, refresh rate, resolution, panel type and variable refresh rate technology.

One of the greatest confusions in the television market today comes from the two major types of newer television display technologies competing against each other, plasma and LCD. While, on the surface, it may not look like there is much of a difference between plasma and LCD, looks can be deceiving. Each has its own technology and its own pros and cons.

The main difference between plasma and LCD monitors and televisions is how the pixels are lighted up. In plasma screens, plasma gas is used to excite visible light photons, which produce color on the screen through the lighting of the pixels into different colors. Thus, it is actually a gas that is responsible for the images one sees on a plasma televisions.

The technology for LCD screens is somewhat different. Each pixel has three colors: red, green and blue. LCD televisions require a backlight. However, the liquid crystals, when energized, block certain colors in the pixels from showing, or at least showing as much. This produces the desired color. The main difference with LCD televisions is the backlight is always on.

The decision between plasma and LCD comes down to a matter of personal preference. LCD, which was never meant for video displays, has a slower refresh rate than plasma. Thus, the criticism is that fast-moving images can sometimes show what are referred to as ghosts, images that have not cleared themselves completely from vision. However, the technology has improved over the years to refresh rates that are very comparable to plasma.

Some prefer LCD televisions because they weigh less and use less energy than do plasma screens. However, both types of display technologies weigh less than conventional televisions, so there is always a net gain when going from traditional to the newer technology. However, for wall mounting, LCDs are usually much simpler.

Plasma televisions, because there is no competing backlight for distorting any of the colors, produce much truer colors. For those who are truly interested in getting the most lifelike colors possible, the plasma technology is nearly comparable to the old CRT technology. Plus, there is an additional benefit of having a sharp, clean picture to view, much more so than a traditional television display can deliver.

For those living at higher altitudes, there are also considerations when considering plasma and LCD. The gas in a plasma set acts somewhat differently at higher altitudes and could produce a distorted view. The LCD television does not have this problem. Therefore, LCD sets may be preferred in mountainous areas.

In the end, for most viewers, the differences between plasma and LCD are a matter of academic debate. Most will find the difference between traditional displays and these newer displays to be so much greater that the differences between plasma and LCD pale in comparison. However, doing a little research before buying will help ensure the consumer gets the best product they can afford, and one especially suited to their purposes.

This is a complicated topic: when choosing between LCD and plasma TVs, you"re actually selecting between two competing technologies, both of which achieve similar features (i.e., bright, crystal-clear images, super color saturated pictures) and come in similar packages (i.e., 3.5 to 5 inch depth flat screen casing). To complicate the decision-making process further, price and size are two previous considerations that are rapidly becoming non-issues as LCDs are now being made in larger sizes and at competing prices with plasma TVs.

Plasma flat screen technology consists of hundreds of thousands of individual pixel cells, which allow electric pulses (stemming from electrodes) to excite rare natural gases-usually xenon and neon-causing them to glow and produce light. This light illuminates the proper balance of red, green, or blue phosphors contained in each cell to display the proper color sequence from the light. Each pixel cell is essentially an individual microscopic florescent light bulb, receiving instruction from software contained on the rear electrostatic silicon board. Look very closely at a plasma TV and you can actually see the individual pixel cell coloration of red, green, and blue bars. You can also see the black ribs which separate each.

Whether spread across a flat-panel screen or placed in the heart of a projector, all LCD displays come from the same technological background. A matrix of thin-film transistors (TFTs) supplies voltage to liquid-crystal-filled cells sandwiched between two sheets of glass. When hit with an electrical charge, the crystals untwist to an exact degree to filter white light generated by a lamp behind the screen (for flat-panel TVs) or one projecting through a small LCD chip (for projection TVs). LCD monitors reproduce colors through a process of subtraction: They block out particular color wavelengths from the spectrum of white light until they"re left with just the right color. And, it"s the intensity of light permitted to pass through this liquid-crystal matrix that enables LCD televisions to display images chock-full of colors-or gradations of them. LED TVs are a new form of LCD Television.

As the advantages show, plasma technology has the better picture quality in normal to low room lighting conditions and are better in 4 out of 5 picture quality categories. Plasma technology will almost without exception triumph during night time viewing. LCD televisions are great for sunroom/breakfast room type environments. Also, LCD monitors are generally better for public display such as airport signage and retail store signage due to the bright room light environment. See full article on plasma vs. LCD picture quality.

LCD monitors display static images from computer or VGA sources extremely well, with full color detail, no flicker, and no screen burn-in. Moreover, the number of pixels per square inch on an LCD display is typically higher than other display technologies, so LCD monitors are especially good at displaying large amounts of data - like you would find on an Excel spreadsheet for example - with exceptional clarity and precision. LCDs are also available in many more sizes, especially the smaller sizes most often used for a computer display.

Plasma technology has increased anti burn in tactics as well as computer and static signal handling. There are still issues with each depending very much on the model and manufacturer. For example, 720p plasma televisions do not handle a computer input well and product a very jaggy image on plasma"s larger sizes.

Plasma displays get the nod here because of their excellent performance with fast-moving images and high contrast levels. There are still some 2nd tier manufacturers whose plasma product displays some phosphor lag, a dragging from brights to darks.

While the "response time" of LCD TVs has markedly improved in the last couple of years, especially with the advent of 120/240Hz displays they still suffer from a motion blur effect, where the individual pixels are just slightly out of step with the image on the screen. The high refrash rate LCD televisions can also have some undesireable effects on the picture. During fast moving sports scenes, the most discerning eyes can detect this slight motion response lag.

There is a reason LCD panels are the preferred visual display units for use on airplanes: LCDs aren"t affected by increases or decreases in air pressure. Their performance is consistent regardless of the altitude at which they"re utilized.

This is not the case for a plasma TV. The display element in plasma TVs is actually a glass substrate envelope with rare natural gases compressed therein. So, at high altitudes (6,500 feet and above), an air-pressure differential emerges, which causes plasma displays to emit a buzzing sound due to the lower air pressure. This noise can sound rather like the humming of an old neon sign. NEC has been effective in producing several plasma models that are rated to 9,500 feet.

LCD manufacturers claim that their displays last, on average, 100,000 hours. In fact, an LCD TV will last as long as its backlight does - and those bulbs can sometimes be replaced! Since this is nothing more than light passing through a prismatic substrate, there is essentially nothing to wear out in an LCD monitor. However, one nasty little known fact about LCD technology is that as the backlight ages it can change colors slightly (think of florescent office lighting). When this occurs the white balance of the entire LCD will be thrown for a loop and the user will need to re-calibrate, or worse, try to replace the backlighting or ditch the unit altogether. Some of the early purchasers of larger LCD screens will be learning this tidbit in a couple of years. One thing that I’ve found in this industry, it is not easy to find out whether the backlighting on LCDs can be replaced. Manufacturers are either hesitant to discuss the topic, or they just don’t know.

Plasma, on the other hand, utilizes slight electric currents to excite a combination of noble gases (i.e., argon, neon, xenon), which glow red, blue, and/or green. This is an essentially active phenomenon, so the phosphoric elements in plasma displays fade over time. Many manufacturers state a new half life of 100,000 hours, that"s just over 68 years if the TV is on 4 hours every day. While I am skeptical of this spec, I do believe strides have been made to nearly even the playing field with LCD. At half life, the phosphors in a plasma screen will glow half as brightly as they did when the set was new. There is no way to replace these gases; the display simply continues to grow dimmer with use.

LCD technology is not prone to screen "burn-in" or "ghosting" (premature aging of pixel cells) due to the nature of the technologies "twisting crystals."

With plasma displays, static images will begin to "burn-in," or permanently etch the color being displayed into the glass display element. The time it takes for this to occur depends greatly on the anti burn-in technology of the manufacturer. Recent improvements by plasma manufacturers have certainly extended the time it takes to burn in a plasma pixel cell. In the past I was concerned to place a DVD on pause 15 minutes. Now, many of the enhancements such as better green phosphor material, and motion adaptive anti burn-in technology are greatly reducing the risk of burn in. It’s gotten so much better that I don’t even worry about it anymore. In a new model plasma from any top tier manufacturer I would put "ghosting" estimates at an hour or more now (Ghosting can be "washed" out by displaying static gray material). Permanent burn-in I would put at more than 10 hours.

Both LCD and Plasma televisions are becoming more readily available in larger sizes though plasma still leads the size battle by a great margin. Pioneer and LG produce 61" plasma sizes while Panasonic has a readily available 65" model. Though it is not being imported into the U.S. yet, PanasonicSamsung has produced a gigantic plasma television of 150 inches. Though such mammoth monitors are expensive, they exhibit none of the "kinks" one might expect with such large displays. In other words, even the largest plasma displays are reliable. Large plasma displays will consume power – try 675 watts for a 65" display compared to around 330 watts for a 42" plasma although plasma manufacturers have reduced power intake and made the product more efficient, some even qualify for an energy star rating now.

ADVANTAGE: Plasma. Even though production costs and retail prices have come down for both technologies, plasma still has the edge as far as production cost and capacity go.

Not a very important issue but worth noting. Because LCDs use florescent backlighting to produce images, they require substantially less power to operate than plasma TVs do. LCD displays consume about half the power that plasma displays consume. The reason: Plasmas use a lot of electricity to light each and every pixel you see on a screen - even the dark ones. Though plasma manufacturers have improved voltage consumption requirements a plasma TV will consume around a third more power for the same size display.

Our value ratings continue to be reason that plasma TVs generally receive higher marks in our overall TV ratings. See the full Comparison Ratings Chart here.

When deciding whether to use plasma or liquid crystal diode (LCD) displays for your applications, you need to consider many factors. Both provide brilliant colour, sharp text contrast, and crystal-clear images. But the way in which plasma and LCD screens process and display incoming video/computer signals is markedly different.

Both plasma and LCD technology provide stark enough contrasts to make displays sharp and pleasing. But when it comes to contrast output, plasma technology outperforms LCD screens. Some plasma displays have a 3000:1 contrast ratio, which is the measure of the blackest black compared to the whitest white. LCDs use electric charges to untwist liquid crystals, thereby blocking light and emitting darker pixels. Despite this process, LCD displays don’t produce more than a 1000:1 contrast ratio.

Pixels contain enough information to produce every colour in the spectrum. Because plasmas use each and every pixel on their screens, colour information is reproduced more accurately. Plasma screens display moving images with remarkable clarity, though burn-in can be an issue. For displays with lots of light and dark imagery, plasma panels provide excellent performance with their high-contrast levels, colour saturation, and overall brightness.

LCD displays, on the other hand, manipulate light waves and reproduce colours by subtracting colours from white light. Though this makes it more difficult to maintain colour accuracy and vibrancy compared to plasma screens, LCDs have an advantage with their higher-than-average number of pixels per square inch. These additional pixels make LCD technology better at displaying static images from computers or VGA sources in full-colour detail. Plus, there’s no flicker and very little screen burn-in.

With LCD screens, there are essentially no parts to wear out. LCD screens last as long as their backlights do, with displays lasting, on average, 50,000–75,000 hours. That’s why LCD screens are especially good for long-term applications, such as digital signage or displays that require around-the-clock use.

Plasma screens, however, use a combination of electric currents and noble gases (argon, neon, and xenon) to produce a glow, which in turn yields brilliant colour. The half-life of these gases, however, is only around 25,000 hours. The glow they produce grows dimmer over time.

Plasmas light every pixel on the screen, making the brightness on the screen consistent and giving plasmas the edge when it comes to viewing angles. In fact, plasma screens have as much as a 160° viewing angle compared to LCDs. This makes viewing the images on the screen easier to see from a variety of angles. In doing so, however, plasmas consume much more power.

LCDs display at 130–140° angles, but their use of fluorescent backlighting requires much less power to operate than plasmas. This also makes LCDs less prone to burn-in or ghosting of images.

Buying a TV and wondering what type of display tech is better? We’ve got the lowdown for you in this LCD vs Plasma buying guide. These two technologies produce images through vastly different processes, and each comes with a different set of pros and cons. So before we dive head first into which type of screen is better and why, it’s helpful to understand the technology behind each type of screen. Don’t worry, it’s not as complex as you might think.

Plasma displays work in an entirely different way. Instead of using a backlight and a set of filters to illuminate pixels on the screen, images on a plasma TVs are created by ionized gas (plasma) that lights up when you run an electrical current through it. The easiest way to undertand it is by thinking of each individual subpixel on the TV as a tiny neon light, or perhaps a miniature version of the florescent tubes you might be sitting under right now. The pixels that make up a plasma display are almost exactly the same technology, just on a much smaller scale.

For those of you who care to understand the science behind it all, here’s how the magic happens: An electrode applies an electrical current to a small cell filled with a noble gas mixture (usually neon and xenon). This excites the gas, ionizing it and transforming it into a plasma. This plasma emits ultraviolet light – which we can’t see – but when the UV light hits a phosphor coating that lines each cell, it causes the phosphor to glow and put out light that we can see. Depending on which particular phosphor the cell is coated with, it will create a red, green, or blue glow. Just like with LCD displays, each cluster of red green and blue subpixels makes up one pixel on the screen (see header image).

Due to the fact that plasma displays have the ability to completely turn off individual pixels, they boast far better black levels than LCD displays. Although LCD tech has improved over the years, the panels still aren’t that great at blocking out light completely, which makes it really hard for them to achieve true blackness on dark scenes. This is especially true of CCFL-backlit LCD screens. Some LED-backlit LCD TVs with local dimming can achieve black levels comparable to those of plasma TVs, but they’re generally much more expensive.

Because of the way they’re designed, plasma TV’s are also better at controlling the relative level of brightness of each red, blue, or green subpixel, so they typically produce greater contrast, more realistically textured images, and richer colors than their LCD counterparts.

Plasma displays also tend to have much better viewing angles than LCD TVs, mostly because the polarizing filters on LCD panels tend to cut out light that isn’t traveling straight forward. Since plasma displays don’t rely on filters to manage the light you see, their pictures can be enjoyed from a relatively wide angle without losing any integrity. Some higher end LCD TV’s incorporate technology to improve viewing angle, but most still aren’t on par with plasma displays.

When images move quickly across a screen, sometimes the pixels on an LCD panel can’t turn on and off fast enough, which results in what we call motion blur. Plasma screens generally don’t have this problem because the florescent phosphor coating in each subpixel stops glowing just a few nanoseconds after the electrode turns off, but LCD screens take a bit longer. This is because the crystals that control the flow of light (ie, shutters) take some extra time to open and close. That being said, however, many newer LCD screens feature refresh rates of 12oHz or faster, which effectively cuts out the problem of motion blur. Lower-end models might still have this drawback though, so be sure to check refresh rates before you buy anything.

If you’ve done even a small amount of research on plasma screens, there’s a good chance you’ve come across a thing called burn-in. This refers to an image that persists on the screen even after the image that created it is long gone  – kinda like when somebody shines a flashlight in your face and you can still see streaks when you close your eyes. Burn-in works in the same way, but on your TV. If something bright stays on a plasma screen for too long (like CNN’s ticker or the Discovery Channel logo) it can sometimes leave a visible ghost behind after the image has gone away. This was a big problem in early plasma displays, but burn-in has largely been eradicated now that manufacturers have devised ways to cycle power to the phosphors and keep them from staying lit for too long. Still, it’s probably not a good idea to leave a static image on your screen for days on end.

Plasma TV’s are much more power-hungry than their LCD counterparts. Generally speaking, a CCFL-backlit LCD screen consumes about half the power of a plasma screen of the same size, and an LED-backlit LCD screen uses even less power than that. Depending on the cost of electricity where you live, you might want to factor in power costs if you’re thinking about buying a plasma TV.

Despite all the advances plasma technology has seen over the years, it still can’t match the brightness enjoyed by LED or CCFL-backlit LCD screens. This makes LCD TVs a better option for rooms with lots of light – especially since plasma TVs almost always have glossy, reflective screens.

So which type of TV should you go with? It depends on a few different factors, but if you’re looking for the best picture at the lowest price, definitely go with a plasma TV. Plasma sets cost roughly as much as your typical CCFL-backlit LCD TV, but offer a picture that’s on par with or better than some of the best, most expensive LED TV’s on the market.

However, if your home theater setup is in a room that’s got a lot of windows and ambient light pouring in, or you just have to have the thinnest TV on your block, you might want to opt for an LCD TV. So long as it’s within your budget, we recommend buying an LED-backlit or edgelit LCD TV – they’re thinner, prettier, and more energy-efficient than their CCFL cousins, but also more expensive. CCFL-backlit LCD TVs should only be a last resort – avoid them if at all possible.

I just ran across an article on DigtalHome.ca [viaEngadget HD] singing the praises of Plasma over LCD. Although I agree with most of the points, there are a couple with which I completely disagree. In fact, both of the posts seem to be overly-biased toward plasma, to the point that it is almost misinformation. Here are the points with which I disagree, which are probably major enough to push most people to pick LCD over Plasma.

LCD superior in brighter rooms – simply speaking plasma is glass with white phosphors behind it. The result is that a mirror effect can take place when extremely bright light shines on plasma. This mirror effect can make it more difficult to see the images on the screen under extremely bright situations. This situation often occurs inside a big box retailer’s showroom which can be as much as five times brighter than a typical living room! In your average living room wher