ge profile refrigerator lcd screen not working manufacturer

One of the most important components of your refrigerator isthe control panel. It displays the state of your GE refrigerator, and the control lets you adjust how you see it.

So when theGE refrigeratorcontrol panel stops working, it becomes a big problem. Usually, ithappens because of a glitch or power supply disruption. However, the fridge is in demo mode, and the control panel might not respond.

You may need to repair or even replace some parts to fix the problem. However, we’ll help youdetermine where to replace anythingwith this list of reasons and solutions for the GE refrigerator control panel not working.

Dealing with the GE fridge control panel that doesn’t work could be challenging. Besides, there could be a handful of reasons why this issue appears. Still, you don’t have to worry, asnot all seasons signify a problem.

The most important thing is understandinghow your GE control panelworks before jumping to conclusions. To understand how it works, you should set the temperature. Just plug the fridge in and shut thedoor firmly. This provides access to the digital display.

Press the “Colder” or “Warmer” buttonson any side of the panel to show the actual temperature. Then press the same buttons to turn the temperature to your desired range. Usually, yourGE refrigerator wouldn’t display the temperaturerange of the screen.

In particular, GE refrigerators use some high-tech electronic parts in their control panel. Unfortunately, like in all electronic devices, thecontrol panel can experience short-term errorsreferred to as a bug or commonly a glitch.

Power supply disruption is the other reason your GR refrigerator control panel is not working temporarily. You’ll know this is the case from the“Power Outage” indicatoron the control panel.

Some GE refrigerators come with built-in demo or showroom mode. As you might have guessed,these modes are activated on digital display panelunits at the store.

They are also useful when you want to keep the fridge’s light on but turn the rest of the functions off, especiallywhen performing tests or repairson your fridge.

All fridge functions, including thecontrol panel, will be inactiveduring demo mode. Sometimes this mode couldbe active without your knowledge. So as a result, the GE refrigerator control panel might not be working when you try to use it.

Sometimes, the dispenser control panelmay experience an electrical fault, like a short circuit which causes it to stop working. In this case, an entire board could become unresponsive. Or it could be that only some buttons need to be fixed.

The main control board is like thebrain of the GE refrigerator. It is a printed circuit board with many tiny components attached to it which control the fridge functions.

However, the main control board is thelast thing you should checkif the GE refrigerator control panel is not working. Why? Since it’s the least likely reason why the issue with the control panel appears. Besides, it’s the most expensive part to replace.

The main control boardcould suffer electrical faultsthat damage some components. Correspondingly some of the fridge parts will malfunction, including the control panel.

Now, you should be assured that if your GE refrigerator control panel is not working, it doesn’t necessarily mean the fridge is broken. It might meanyou have to replace some parts.

Sometimes when the control panel doesn’t work, it might be because thebasic research hasn’t been done. Toreset your refrigerator, unplug it for about a few minutes and let it rest. It gives your GE appliance a chance to clear its memory. Then, plug it back into the outlet.

Theprocess should reboot automaticallyand restore the fridge to the default setting. If you have an active warranty, you can call the manufacturer to seek and expect advice and possible GE refrigerator repair.

To repair it, you should disconnect your GE Profile refrigerator from the power source, turn it to reveal the back, and trace the cord. After that,undo the screws and the back panel, and locate the disconnect or burnt area on the power cord.

A power supply is one of the common reasons why your GE refrigerator control panel might not work, even though it is not a problem. The control panel will only work onceyou confirm that you’ve read the warning.

Unplug the refrigerator and remove the screwsholding the control board’s rear panel to see if there are any more significant problems with the power supply.

Disabling the demo or showroom modewill help you get the control panel to work again. However, thesteps might differ across different GE refrigerator models.

With some GE fridges, it is enough to unplug the cord and plug it back in. At the same time, some models require you tohold the control lock and precise fill buttonsfor about 7 seconds.

Since the dispense control board is a singular piece, you’ll have toreplace the entire unitregardless of whether the whole board stops working or only one button.

Unfortunately, the main control boardis not a serviceable part. It means you have to replace an entire unit. Once you have a replacement board, loosen the screen on the back panel and gently detach the wires on the old one.

Then, use the soldering iron tofix the wires to the nods on a new board. Remember to check the voltage supply with the multimeter again. The result should be at least 13-14 ohms.

First, unplug your GE fridge and open the lower grill. Thencheck the waterline underneathand adjust it to the right position to ensure it is correctly connected to the refrigerator.

After that, check the top of the GE fridge and undo the screws on the hinge cover. You need todraw out the water dispenser wiresand check if they’ve been burnt or disconnected. If so, you need to repair or reinstall the door wiring.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Hello, I am new to this forum. The LCD display board on my GE profile PFE29PSDASS is not working even though the lights, sensors and buttons all work. The LCD display is just dark. I ordered a new LCD display control board and plugged it all in and that one doesn’t work either.

also, the icemaker is not filling up water into the ice tray. I hear the harvester moving but there is no water coming into the tray. I replaced the water inlet valve on the back of the refrigerator and still no water.

Thanks for the response. So I went ahead and filled up the ice maker manually, not sure if there was an easier way then pouring water from a glass in there haha. Is there a way to force the ice-maker to cycle just to see if it has any life?

As for the digital display, I pulled the board out to check and see if there was any visual damage to either the board or the ribbon cable. I saw none and threw it back in. Once I did that, the buttons no longer made a single beep when I pressed them. So I unplugged the fridge for a minute or so and plugged it back in. Now the LEDs are on, but when I press any of the buttons the fridge just beeps three times. One problem solved and a new one starts lol.

The digital display reads 18 degrees in the freezer area, which until I pick up a thermometer, may be why the ice tray isn"t coming on. According to the manual it does not activate until 15 degrees. However, I have some ice packs and a bag of ice in the freezer and all of that is frozen.

Thanks again for the help, the wife and I were definitely not expecting to have purchase a new fridge, and we tried to save as much money as possible!

We have a GE Profile refrigerator model #PSHS6TGXCSS. It was unplugged and moved to another plug temporarily due to some work we had happening in the house. When we opened the fridge we noticed the compressor isn’t running, it’s not cooling, the front display panel is not working, but the lights are on inside. We tried to reset it by unplugging and moving it back to its original outlet, but nothing changes- it is still not working. Is there anything we can do to get it working again- another way to reset, diagnose, any fuses, etc? We can’t imagine unplugging it would have caused it to completely stop working!

After a two hour power outage, my GE refrigerator front panel, light, water, ice are not lit up or working. Freezer is not staying at freezing temp and the refrigerator is cool but not cold. I have unplug for several minutes that didn’t reset it. Have tried numerous combinations of buttons on front, even though manual doesn’t tell me which one to use. Even turned off ice machine and back on. Any other suggestions without having to call a repairman. My serial number is GSHF3KGZBB

Daewoo model DRX31B3S display panel has 4 horizontal indicator light illuminated (so power is on the panel) and I cannot set anything, fridge freezer doesnt work, checked fan using 12dc battery charger and it works 290 ohms resistance on defrost heater, no internal lights either in the fridge or freezer are on.

I have an LG refrigerator LFX28977SB/00, The cooling and freezer are working just as they should. However the ice maker and ice/water dispenser does not work. also the display is blank and the light on the dispenser stays on. I have tried all the reset suggestions but nothing works. Any help would be appreciated. thanks

Hello. I have a GE Profile side by side that quit with out any warning. Both mother board and temp control board replaced but still no life. What do you suggest for the next step? I do have lights inside, nothing else. My model # is PSS26LSRCSS

I cleaned the outside door by spraying it with 409 Cleaner. Right afterward, the control panel for the water dispenser/ice maker/temperature control/light etc. stopped working. No lights were on and nothing would dispense. There did appear to be liquid behind the front covering.

I unplugged the fridge multiple times after trying these things to attempt to reset and that didn’t work. After reading some tips, I held my fingers on multiple functions at the same time in an attempt to reset but that didn’t work. So, I’m not at a loss. I’m hoping you can provide instructions or information that I can use to try to fix it before calling a technician out.

I have a whirlpool refrigerator model #gi5svaxvlo1/ sn#ko1911535. Unfortunately my wife and I went out of town for almost two days and we left our refrigerator door ajar. The door alarm light was the only light on on our control panel. I’ve tried resetting the control panel but this website isn’t showing results for whirlpool models. Do you have any suggestions on what and how to fix our blank display panel?

Exact same thing happened to us after a cleaning, except it didn’t appear to have any moisture behind the panel but that’s the only thing that makes sense. Still not working 6 months later after several attempts to unplug, reset, etc.

Hello, My GE French Door Refrigerator new in 2012 Model GFSL6KKYELS has an issue with the front control panel. It has lights but does not respond to touches. Sometime it will respond and afterward temp setting automatically change themselves and the power cooler but keeps coming on and lowering the fridge temp to 29 or 30 eventhough it is set at 38. I have reset the power several times and still have same issues. I used the auto diagnostics by holding down the energy saver and alarm button for 8 seconds and get an N2 code at the freezer temp reading and an A8 code at the fridge temp reading. Please help. Thanks

After a power cut off and back again, my fridge ( samsung AW3-14/AW4-4D), shows an error PC ER , I checked the wire harnes at the upper left corner , unplug and plug again after power off , and then power on again , same issue, tried to reset at first it gave me 41 ER , and after another reset now its showing 0C 0C , both temperatures shows zero value and the fridge still not working ., please help.me in this urgently . Many thanks in advance .

Maytag MFT2976AEM O3 refrigerator has recently started shutting on and off and will blink with the red “power outage” alarm and “replace filter” alarm.

The alarm goes off about every 15 min, the fridge itself doesn’t turn off the light stays on but it sounds like it stops cooling and the freezer is making a loud noise like its having some issues.

Everything in my freezer is thawed so I assume that’s part of the issue but my wife has had it unplugged all night because it was keeping everyone awake.

Maytag MFT2976AEM O3 refrigerator has recently started shutting on and off and will blink with the red “power outage” alarm and “replace filter” alarm

We had a power outage for a couple hours and when power came back on the light inside the fridge works but the control panel is blank and fridge has not kicked on again. I unugged it and replugged in the same outlet and a different outlet but still the same. This is a side by side GE GSH25JFXN WW. Thank you!

My refregerator Samsung model RS51K57807S control panel showing code 5C AND the control panel always on , its not same before working for few seconds then it will go to energy saving mode.

NOTE: THE REFREGERATOR WORKING PROPERLY AND BY HOLDING POWER FREEZE AND POWER COOL WILL FIX THE ERROR 5C WHILE THE REFREGERATOR CONECTED TO THE ELECTRICITY.

Sometimes its start running and fridge becomes ok, cold is good but after 6 hrs when the compressor turns off (defrost cycle i think), the fan continues turning but the compressor run again and everything defrosts completely in the fridge.

I have a GE GSL25JFTA BS there have been power outages here over the last few years and there has never been a problem with the refrigerator or freezer. However, the last three times the refrigerator and freezer lights come on inside but it is not cooling or freezing and the front panel is blank. The last two times it started working again on its own but this time I cannot get it to. I have turned off the power, unplugged it and still nothing. HELP! I am retired and on a fixed income and cannot afford a new one or repair bills.

I have a Samsung RS261M. It is constantly going out. Which reset action should I use? I unplugged it a while ago and then it was stuck on 1 bar. I was going to give up on the darn thing and then it suddenly started working again even though the buttons were not working. Now it’s not cooling again.

Issue: After the power outage, the fridge has stopped cooling properly.The LED display isnt showing any information properly…it is like a partial value getting displayed which is not correct.We turned off and switched the fridge back on.The display shows all values and goes off again. The service team says that the display is gone and nothing can happen..either use the fridge like this or sell it.

Pressing the “Freezer -” button which should turn on everything to start both compartments cooling again only makes a short sound similar the “+” sign button but then I hear a small pop or clap and then nothing including fridge cooling.

Although the Touch Screen does not stay on… if I press any button I get all LED light up but they are I guess zeroes or all the bars inside lighting like an “8”.

What is popping or clapping right near the Touch Screen that I might fix or is there some other combination of buttons to push to get it running again?

For a couple of weeks the fridge has kept switching from Farenheit to Celsius. We noticed that the fridge and freezer have been too cold (frozen veggies, eggs in the back etc)

Now the fridge light and display turn off. Still cold/frozen, but no ice produced. No power outages that I know of, but I did have to reset the clock on my microwave? I have turned circuit breaker off for 10 min. And on. No change. I can push the on button and the light/controls do start (we can get water), but it turns off again eventually.

I’ve pushed various buttons for 8-10 seconds. I just tried turning on quick cool, and it’s staying on longer as I type. But it’s -6 and 34 degrees already. Then changes back to Celsius reading.

I had a refurbished circuit board put in in April (it wasn’t controling the fan any longer). I don’t want to purchase a new fridge. Is it related? Help appreciated!

Maytag model#MF12269VEM7. Had a power outage and front panel light up when pressing any key at the beginning and stop lighting up few min after. I hear motor trying to start and beeping for few second. Sometime it run for 2 second and shuts off again. Is there something I can do to fix that?

My Samsung (RF28K9070SR/AA) is working, control panel works but on normal operation the temp status display no longer stays on. Stopped after a storm/loss of power. Is there a procedure to keep temperature indicators illuminated?

I usually hold down the freezer and refrigerator buttons at the same type in order to reset it but when i do so it does not change. I unplugged the refrigerator but it is displays -21 for the freezer and 20 for the fridge and I cannot get it to change to the right temperature

My whirlpool freezer door display is not working properly. It will only show us the lock icon. We have tried holding the lock button to unlock it and it will not do anything. Is there a way to reset or what do i need to try?

I have a whirlpool gold that doesnt run. at all, and the dispenser screen is blank. Till you hit any button and all lights come on including three zeros for refrigerator and freezer –having replaced the circuit board behind this display it does nothing –just the same situation given the fact that it lights up all buttons s, till you release -it’s hard to believe it’s the main board it’s also hard to believe it’s the touch panel cuz everytime you hit any button it does respond the same way..model gifsaxvy01 whirlp.

Frigidaire Gallery FGHB2844LEG was giving a SY EF error. Changed out the Evaporative Fan Motor and Fan still wouldn’t work. Changed the Main Control Board in the bottom. Now my display on the door after plugging it back up only shows the factory temp for a few seconds then goes blank. All the soft buttons works except the temp. Can you help with this. I have unplugged it and left unplugged for 10 minutes and still the same factory temp then goes blank. Turned the unit off on control panel and left off for 10 minutes and still nothing. Could my new control board in the bottom of the unit be bad? Part #24211539 Board Main Power.

My GE fridge model GSH25JSTC SS display panel won’t turn on after a power outage. This happened a couple of months ago and I randomly pushed some buttons and the display turned back on. I cannot remember which buttons I pushed. Can you help me? Lights in fridge are on. Display panel off. Fridge not cooling.

You can attempt to unplug the fridge and dissasemble the front panel and check to see if the wire harness has become disconnected on the touch pad panel.

We just purchased a Samsung flex zone 4 door refrigerator (rf28k9070sg/aa). We have it hooked up and it is running ok, everything cold as it should be. The only problem is the display panel is saying our freezer is 80 degrees and the fridge is 79. I tried to do a reset on it which turned the panel off then back on. Upon turning on, the temps still show the same. Any suggestions?

I have a Maytag model MFI2568AEW. The Fridge and freezer is working but the interior light and the control panel is blank. I tried every code I can find. I unplugged it and I reset the breaker, nothing works. The only lights I can get to come in is if i push and hold the door alarm button the light will come on and say “F_C”. And the other screen has the degree circle and can switch from C to F also but I can’t choose either of them. PLZ HELP.

After a lightning storm and power outage, my KitchenAid refrigerator (ksso42ftx04) display panel was not working and the fridge was making a slight clicking noise. I shut it off and turned it back on but the fridge would not come back on.

I have a Jenn-air JFC2089WEM side-by-side refrigerator. I just changed the water filter and am now having a problem getting my refrig temp back to 38. It is at 44. How do I reset?

I have a GE refrigerator. We had a storm with power outage, frontpanel went black & the fridge and freezer stopped working , the lights inside still came on. I ordered replacement front panel. 2 days later the panel came back on and all is working. Still waiting for replacement part, but why 2 days, everything is lost from fridge and freezer why did it come back on? Is there a way to reset before food goes bad? Model GSS23WSTASS PLEASE HELP

I just bought a new house, the previous owner left a Frigidaire Gallery refrigerator ( Model NO. FGHC2331PF6) . At the closing day I asked the agent to turn off the refrigerator because we were going to clean it later, but now I can’t turn it on. the panel is totally black and not responsive to any push. Please help.

I have a maytag frigerator it keeps bulding ice at the bottom of the freezer and i always have to go down there and break it all off. This time when i did it the frig starting beeping like it wasnt shut i got beeping to stop but the panel dails arent right and it wint let me change them. I have turned it off to try to get them to reset nothing is working any advice? Please qnd thank u

I have KitchenAid kfis25xvms2. following a 1.5 day power outage and being on backup generator, the fridge has flashing lights on the lock and light display and does not appear to be cooling. Yes power back on when problem started. is this likely something to do with the panel or the run capacitor ap6023677

We just replaced the board that controls the Freezer defrost- once all was replaced and plugged back up the display is not working Kenmore 10672009010 French door.

I plugged it in yesterday and it began to get cold (freezer anyway) immediately. The only light on the panel was for the water filter (which I had replaced earlier in the day). Press and held, nothing. Light stays on. I ran a couple of quarts or so of water thru the dispenser. A couple of hours later I noticed the light was off. But the fridge wasn’t cooling either. And water isn’t dispensing. Lights on inside. I unplugged the unit. This morning I went nosing around the back after reading online. Removed the panel over the control board and a cup of water drained out! (Literally a cup, I captured it.

Before I found the control board, I was assuming the evaporate fan motor was out since the fridge side wasn’t working. Is it possible the control board can be saved? Any ideas?

After a power outage, my Whirlpool Gold standard MODEL: GI5FSAXVY01 refrigerator has stopped working. The fridge is not cooling and I do not hear any noises however, the lights are on and when I press a button on the control panel all lights illuminate. When I press the ice or water button an alarm goes off continuously until I remove my hand. I have tried unplugging the fridge and tripping the breaker.

Hi there i have a sumsung side by side fridge/freezer model RSJ1KERS it flash small dot something like half 1 on the freezer side on panel and on displaying panel of fridge side its blank and the condessor fan motor does not run because of that my fridge is not working someone can help me please…

My frigidaire model fghc 2331 pffaa froze up the back of the freezer so we unplugged it defrosted it got new filters plugged it back in and now our display panel won’t come on…how do we fix it?

After I plugged the unit in after replacing a evap fan motor, the display on the ice control panel keeps turning on, displaying “GE” and shutting off, restarting display and looping over and over.

I have a Samsung RS263TDRS and the lighting is only working on the top portion of the panel. The lights for ice, water and filter do not light up, although they do dispense.

Maytag MFF2558FEZ need help.. the panel is just showing a line in both the freezer and fridge panel. The lights are on but its not cooling how can I reset it

We had a power outage recently. After power came back, our Maytag refrigerator control panel on the door went dark. Even though the interior lights were working, but the compressor and circulating fan motors were not working. Ice dispenser was not working either. I had tried to unplugged the power core for several min. and plugged back in. I checked the internet and follow some suggestions to do manual reset. That was not working. However, I did notice that about 5 min after the power core was plugged back in, the fridge control panel display came back. But it came back for only a few seconds. Then the control panel went dark again. At that point I gave up and started to move all the food out of the fridge. The fridge was still plugged in. About 12 hours after the power outage incident, the fridge started working again. All the display came back, ice dispenser was working, and all the motors were running. The fridge apparently wakes up after 12 hours in coma caused by the power outage. I would like to hear if someone can tell me how the Maytag self reset logic works.

Question 3: Why would “faulty relay or cap in the back bottom” prevent the the front control and display from not working properly or at least stay illuminated without holding any button down?

If this is what it’s doing do you know how to get out of this precheck mode or do you know where I can link to a schematic to test different signals from ECU?

Refrigerator Series Parts Model GSL25JFXNLB The control panel is not working and we cannot control the cooling therefore the refrigerator is not cooling and nothing works but the lights. The refrigerator has been sitting without being used for about 2 years.

No bad spots – Be sure to make notes of how many wires are in each harness and their positions on the board ON PAPER BEFORE YOU UNPLUG THEM one by one.

I did this to resolve a freezer not defrosting problem, it appears the control board had a “Timer” in it that “Reset” by unplugging the wiring harnesses.

I have a Samsung French door refrigerator with Flex Zone drawer. The light display is “stuck”. The lighting, cubed ice and filter displays are on but stuck. No other lights will come on. Filter is beeping and driving me crazy! Refrigerator is “built-in” and I cannot move it!

I own a GE Profile, model# PFSS6PKXESS. The control panel for going on the past month has had a mind of its own. An audible alarm rising jingle, then descending jingle goes off on the control panel. When this happens, the LOCK goes on and off along with the ICE function on and off sometimes for a few seconds by itself. Temperatures are not displayed and the water filter sometimes makes a sound when trying to reset the filter (Which is odd, because since my water is already filtered before the fridge, I am using the GE Plug that came with the unit instead of a filter) Recently, the control panel was completely unresponsive to touching anything other than LOCK. Once I heard the jingle go off again, I then attempted to use the control panel and only then did it allow me to switch Iced cubed, Ice crushed or water. Does the control panel need replaced?

I have an Amanda side by side refrigerator/freezer. We have not used the fridge for a while and now we have switched it on the motor comes on and both the fridge and freezer are getting cold but the control panel is just flashing and will not respond to any buttons we push, there is no beep when we press the buttons. We have switched the fridge off because we are worried it will get too cold. How can we get the control panel to work properly. Thanks

My GE Monogram Refrigerator EIS 360 display panel shows 5555 for both the fridge and freezer after power outage, but cooling for both sides are working.

We have a whirlpool gold series refrig with freezer in bottom. Power outage today and control panel is blank. It will light up with pressing any button but will not reset. Refrig and freezer still works but cannot use water and ice dispensers. Tried all combos listed previously. Any other suggestions? Please help!!!

Since I had multiple issues with my Whirlpool gold GC5SHEXNS00, (e.g. condenser fan, evap. fan and damper all acting strange or not working) I just replaced ALL four relays and the C32 capacitor on the control board. All those components are now working correctly, the freezer is cold and the refrigerator is catching up. HOWEVER now I don’t have power to the water dispenser and freezer lights (I am guessing ice maker too). Since there is no schematic I was wondering if you (or anyone else here) knows which wire bundle and which relay on the control board powers these items. Thanks much.

I have exactly the same problem. By turning the power on-off I can get the fridge lights to come on intermittently and the fridge seems to work fine.

I forgot to add that my Defrost still doesn’t seem to be working although I have checked the heater and it is fine…..I actually hooked up the heater to 110V and defrosted the fridge….just have to make sure that one doesn’t leave it on “too” long as it will get red hot and this is probably “too hot!!”

GE Fridge model GFSS6KKX sounded like a lawn mower. Noise stops when door is open. Noise coming from Fridge (upper) not from below ( condenser) . I suspect problem with evaporator fan. There was a puddle under the draws which hasn’t re-occurred in the past 10 days. Bought new Fridge but noise stopped before delivery. Fridge unplugged when moved to garage. Diagnostic codes displayed was segment 3 flashing. What does that mean for this model? Holding two top buttons did reset display and I was able to lock the ice maker since there is no water line available. Fridge seems to be working but does not display temperature nor can I change the settings. The fridge is 8 years old.

Just tried to unplug the ref and left it 30 min. Plugged back in all OK but no display panel nor any beeps when I press any of the buttons. Is there a combination of buttons to be pushed for this model?

If the display panel is going haywire and beeping for no reason and the buttons do not respond, then yes you may need to replace the control board or display board.

If there is a problem with the display I suggest you first check that the wiring to the PCB of the display is not broken. The wiring is routed over the top of the door beneath a removable plastic panel, and then over the top door hinge. The repeated opening and closing of the door puts a strain on the wires and breaks them……at least it did on my Kenwood fridge freezer. A replacement wire can be obtained from ‘espares’ for about £15, and the replacement can be fitted in less than 10 minutes.

NOTE:Turning cooling off does not disconnect power to the refrigerator. The interior lights will turn off if either compartment door is open for more than 10 minutes. Simply close and open the door to turn on the interior lights.

Maytag model number mfi2569yem0, all lights on the display board light up when you push any button then goes back dark, the lights inside work, the ice chute opens when you power the unit back up, i have unplugged for 10 minutes and plugged back in, it is not running, fridge and freezer are hot.

I have a GE hotpoint refrigerator. After a power outage my temperature control display is blank. Also the compressor and fan are not working the model number is HSM25GFTSA.

LG fridge/freezer model LRFD25850. Display panel does not light at all. I cannot do a reset because none of the buttons work. The fridge is too cold, freezing food. Inside lights work. We replaced the display board and back control panel but that’s not the problem.

If you have replaced the display board and the main control board at the back of your LG Refrigerator, then recheck that you have the wiring harnesses secure and in the right position.

We are having the same issue with the LG LRFD25850ST and we cant find a replacment part for the dispenser display control panel (states discountined on all websites Ive checked) Do you know how many times to press a button to try and adjust the fridge correctly again.. Display is blank – do you think the buttons would still work and maybe the display lights would be out??? Could unplugging it help reset it??? HELP I have a baby and a child in the house… everything is freezing in the fridge.. frozen milk, strawberries lettuce… HELP please!!!

We have a Hotpoint side by side refrigerator that stopped working yesterday. The light in the fridge/freezer are both on but it is not cooling and the display in the freezer door is dark I can’t see any LEDs indicating cold level and ice maker.

We have a Whirlpool refrigerator model#gd5nvaxwa00. The display in the thermostat panel doesn’t work after a power outage. We unplugged it for 5 min or so and the lights came back on. After a short time it went out again and the compressor doesn’t come on after the lights go out.

I noticed my fridge had stopped working. The meats in the freezer were starting to defrost and the refrigerator part was warm. I checked the power outlet and power is coming from it. The light in the fridge part is working. The control panel is completely dead, no lights, no display. The compressor and the fans are also not working either. We did not have a power outage last night. I have tried holding down a combination of buttons on the control panel to see if it needed to restart.

The lights work in your Maytag refrigerator…. but it is not cooling, the front display is not illuminated and the compressor and fans are not running at all?

We had a 15 hour power outage yesterday. My Samsung Model # RF28HMEDBSR-AA was plugged in the whole time & when the power came back we had a blank display. We tried unplugging for various times & pushed various buttons on panel but still not working. No cool or freeze.

I have a Maytag Refrigerator that quit working after lightning hit a transformer. Model mfd2562vem11. Control board is dark until you hit any button. When button is pushed all characters and leds light up. Replaced control board. Same result. No Tech sheet with refrigerator. Freezer and fridge not on.

With more than 90 years experience in the refrigerator manufacturing industry, General Electric (GE) refrigerators are a well known trusted brand. This popular brand with its wide range of refrigerator models are easily recognisable and known to be reliable. However, like all appliances, they can develop the odd problem.

If you need to reset your GE refrigerator and are not sure of the correct way to do it, keep reading. In this article we’ll give you all the information you’ll need to successfully reset your GE refrigerator. And explain what any error code your refrigerator might be displaying means.

Most GE refrigerators don’t have a reset button as such, but that doesn’t mean they can’t be reset. To reset your GE refrigerator follow the advice of our refrigerator expert below.

The first stage in the process of resetting your GE refrigerator is to remove its power. To do this either unplug the power cord from the wall socket or switch the circuit breaker off. After around 5 to 10 minutes, reconnect the power and turn the wall socket on, you should hear the refrigerator start up.

Then open the freezer and locate the shut off switch, turn it off and allow at least one minute to pass before turning it back on. Finally, find the ice maker shut off which is usually located at the top of the ice maker. Push the ice maker shut off up and down and repeat three times, your GE refrigerator is now reset.

To reset the temperature on a GE Profile refrigerator, just press the temperature button on the control panel, this will get you into self-diagnostic mode. Once both refrigerator and freezer temperature control displays are displayed, set them both to “5”.

Then press and hold all four of the temperature adjustment buttons for 3 to 5 seconds, you’ll then notice “0” flash on the display screen. As soon as you see the “0” on the screen, press “1” and “5” this will reset your appliance.

To reset the compressor on your GE refrigerator, remove it from mains power by unplugging it or switching the circuit breaker off. Wait for around 10 to 15 minutes, then reconnect the power, don’t worry if the compressor doesn’t kick in immediately, it may have already accumulated enough pressure which it will need to dump before it starts, to avoid damage.

Smart fridges have self-diagnostic systems that will display an error code if they detect a fault. While it’s not always possible to effect a repair yourself, it’s useful to understand what that code signifies. Below is a list of common GE error codes and what they are used to signify.

To remove an error code from the display of your GE refrigerator select and press the system check button. This will clear the error code from the screen. If the code reappears, this would imply there is a problem that needs dealing with.

If it is beyond your level of competence and safety, we suggest you call in an electrical engineer to diagnose and repair your refrigerator. Never tamper with anything electrical unless you are certain it is safe to do so.

Not every code displayed on your GE refrigerator is an error code. Some are just normal operating codes, it might be helpful for you to familiarise yourself with these to avoid any unnecessary concern.

These are standard functions and nothing to worry about. However, if you see any of the error codes displayed instead of these, and they won’t clear, contact an engineer.

After a power outage the display will be showing “88” to reset this just press the energy saving button and the alarm light button simultaneously and hold for 10 seconds. After 10 seconds you will hear a beep and the display panel will be reset.

To reset the temperature on a GE French door refrigerator use the touch screen temperature display panel for the fridge and tap the pad until your desired temperature is reached. Be aware the setting control only goes in one direction so you may have to go way past where you want to be before it returns to low temps again.

To reset the control board on a GE refrigerator just remove the refrigerator from the power supply by removing the plug or turning the circuit breaker off. Allow 5 to 10 minutes and then reconnect the power.

To reset a GE side by side refrigerator press and hold the energy saver and alarm light buttons simultaneously for 10 seconds. You will hear a beep when the 10 seconds are up, release the buttons and the refrigerator is reset.

To check the power cord of your GE refrigerator, locate the power cord and hold it, Now, trace it gradually to the switch to ensure that there is no interruption, burn, wear, or tear on it. If there is any, it implies that the power cord is malfunctioning and requires a repair or replacement.

To repair the power cord of a GE refrigerator, start by disconnecting the refrigerator from the power source. Then, turn it to reveal the back, find the cord and trace it gently to the back panel with your hands.

Undo the screws on the back panel and locate any burnt area or disconnected part on the power cord. When you do, reattach the disconnected wires, taking note of the colors. Then, use a black mending sellotape to cover up the patched area.

To replace it, get a new power cord that suits your GE refrigerator model. Unplug the refrigerator, turn it and use your hand to trace the old cord to the back panel.

Loosen the screws and clips on the back panel and wire, respectively. Detach the old one from the refrigerator and attach the new one to the port. Then, plug it into a power source to check if the refrigerator will come on.

However, repairing the power cord is dependent on which part needs repair. If the plug of the cord has a broken prong, a quick replacement of the plug will do. A new power cord will only be needed if the entire cord is damaged.

To determine if the voltage supply to the GE refrigerator is enough, unplug the refrigerator. Next, loosen the screws at the back panel covering the control board.

Now, use a flat screwdriver to pull out the frame gently. Locate the black and red wire on the board, get a multimeter and set it to the lowest range.

Clamp the probes on each other, then connect the red and black wire to the multimeter. If the result shows less than 5 ohms, it means the voltage supply to the refrigerator is not enough to power the control panel.

To fix this, purchase a suitable control board. Loosen the screws on the back panel to remove the frame covering the control board and detach the wires on the old one gently. Use a soldering iron to fix the wires to the nodes of the new one.

Next, check the voltage supply again with a multimeter. If the result shows around 13-14 ohms, it implies that the voltage supply is sufficient to power the panel.

You can refer to the user’s manual for the correct range of voltage your refrigerator needs because the range varies for different GE refrigerator models.

To inspect the door wiring of your GE refrigerator, unplug it, open the lower grill, and check the waterline underneath it. Adjust the waterline to the right position and ensure that it is properly connected to the refrigerator.

After doing this, check the top of the refrigerator and undo the screws on the hinge cover. Draw out the water dispenser wires and check if there is any burnt or disconnected wire. If there is any, it means that the door wiring needs a repair or re-installation.

To repair it, unplug the refrigerator and loosen the screws on the hinge frame. Now, support the door with your legs and pull out the dispenser wires. Locate any disconnected strand and join it to the other part gently, then connect the wires back to the wire connector.

Place it in the right position, fix the hinge, drive in the screws, and plug in the refrigerator to test-run if the control panel will start working. If it does not you will need a replacement.

To install new door wires for your refrigerator, unplug the refrigerator, open the grill under it, and disconnect the waterline. Use a suitable screwdriver to loosen the screws on the hinge cover, pull out the dispenser wires and the hinge respectively, and carefully detach the wires from the refrigerator.

Next, fix the new wires on the refrigerator door and align them properly. Pass the wires through the hinge and plug them into the wire connector of the refrigerator. Place the connector in the right position, put the hinge cover on it, and drive in the screws.

GE refrigerator doors are usually connected electrically to the refrigerator. This is because the control panel is located on it. Sometimes, when the control panel is defective, it may be that the door is not properly shut. A simple push of the door could make the control panel come on without any stress or delay.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.

To understand how the control panel of your GE refrigerator works, set the temperature. To do this, plug the refrigerator in and shut the door firmly. This gives you access to the digital display.

Press any of the “Warmer” and “Colder” buttons on any side of the panel to show you the actual temperature of the refrigerator. Then, press any of the same buttons again to set the temperature at the desired range. Pressing warmer or colder increases or decreases the temperature by one range.

However, when the refrigerator is working normally, the control panel does not display the temperature range on the screen. This may give you the impression that the control panel is not working or is defective, but it is working well.

A GE refrigerator control panel may not be working because a basic reset has not been done. After checking the control board, inspecting the power cord, and the voltage supply, try to do a basic reset.

To reset your GE refrigerator, unplug the refrigerator for about 1 minute and allow it to rest. Then, plug it back into the wall outlet. This process automatically reboots and restores the refrigerator to the factory or default setting.

However, if you have an active warranty with GE, you can call them to seek expert advice, repairs, replacement, and inquiries on how to fix your control panel.

You can also engage the services of a professional refrigerator repairer or agent. We have some expert technicians here to fix any refrigerator problem you may have. Chat with any of them.

The first step when you see a PF error is to check the food in your freezer and refrigerator for spoilage. Discard food if it is discolored, shows signs of mold, or has an unpleasant smell.

Check the power cord for signs of wear or damage. If you see any exposed metal wiring, turn off power to the outlet from the circuit breaker and disconnect the power cord from the outlet. Exposed metal wiring is a fire and safety hazard. Discontinue use of the refrigerator until the power cord is replaced.

If no additional errors display, you may have a problem with the electrical outlet, internal wiring, or main control panel. Contact a qualified GE refrigerator repair service for assistance.

Pro Tip: It is not safe to eat food that has thawed and refrozen. If experienced a power fluctuation when you were away from home, it is possible your freezer warmed enough that the food inside is no longer safe. As a safety measure, place a cup of water inside your freezer until it is frozen. Place a coin on top of the ice. If you suspect an extended period of high temperatures inside your freezer, check the cup of ice. If the coin is not on the top the water melted and the food inside your freezer should be discarded.

There is an issue between Cloudflare"s cache and your origin web server. Cloudflare monitors for these errors and automatically investigates the cause. To help support the investigation, you can pull the corresponding error log from your web server and submit it our support team. Please include the Ray ID (which is at the bottom of this error page). Additional troubleshooting resources.