raspberry pi 3 2 tft lcd display in stock

3.5 inch resistive touch screen, very convenience to install with Raspberry Pi 2B 3B, and no external power supply needed, it comes with set-up instructions manual

Compatible with many OS. Note: 1) touch function support OS: raspbian, kali, Ubuntu if you install customized image driver; 2) touch function support OS: raspbian, Ubuntu when installing touch driver separately. 3) display function support OS: Raspbian, kali, ubuntu, Retrope, PiPlayer, windows10 etc. and it just need install OS you would like

This LCD display resolution is 480*320. It also supports input resolutions up to 1920*1280 resolution. Support adjustable resolution: between 480*320 to 1920*1280 any resolution (recommended 3: 2). Those resolutions higher than 480*320 will be compressed to 480*320 in the LCD display. When resolution is compressed, the screen display ratio might be changed accordingly.

Support playing video and games. With 3.5mm Stereo audio output. This is a screen that would work out of the box and with minimal effort to get the touch control working.

4) Not play and plug, but you prepare a SD card with OS (such as Raspbian, kali, ubuntu, Retrope, PiPlayer, windows10 etc) and insert in raspberry Pi, and the LCD can display, but no touch function.

5) This LCD display resolution is 480*320. It also supports input resolutions up to 1920*1280 resolution. However, those resolutions higher than 480*320 will be compressed to 480*320 in the LCD display. When resolution is compressed, the screen display ratio might be changed accordingly.

This 3.5 inch TFT LCD Display Module for Raspberry Pi is designed to work with the RPi zero / 2 / 3 Model B / B+ and can also be used on other hardware platforms with SPI interface (Raspberry Pi showed in the picture is not included). The 3.5″ screen is the same size as the standard Raspberry Pi model B/B+, and integrates well wherever it does.

The 480 x 320 pixels resolution TFT LCD with touch screen requires no external power supply. The software package contains everything you need to start, including calibration software and virtual keyboard.

The highlight of this display module is plug and play without needing to reboot the Pi, and SPI speed runs as fast as 32MHz to support games and videos.

The 3.5 inch TFT LCD HDMI Touchscreen Display Module for Raspberry Pi (B010601)is the same size as the standard Raspberry Pi model B/B+, and well mates with the Raspberry Pi boards. With its touch screen and split audio from the HDMI input, it is ideal for portable devices and multimedia projects, and it is a replacement for a heavy and bulky HDMI monitor, keyboard and mice.The 480 x 320 pixels resolution TFT LCD with touch screen requires no external power supply. The software package contains everything you need to start, including calibration software and virtual keyboard.

To start a return, you can contact us at store@createlabz.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.

7 inch screen features a high-definition IPS screen with a resolution of 1024×600 and a visible angle of 178 degrees. The screen is made with tempered glass for added durability. It is designed for easy use, with a plug-and-play feature that allows for immediate use without the need for driver installation. The screen offers three different display modes: duplicate, extend, and second screen. It is versatile and can be easily connected to laptops, PCs, game equipment and is perfect for extending your screen. It is compatible with Raspberry Pi 4, 3, 2, 1, 3B+, BB, Banana Pi, Windows 7, 8, 10 PC, TV, and more.

Versatile and can be easily connected to laptops, PCs, game equipment, and Raspberry Pi 4, 3, 2, 1, 3B+, BB, Banana Pi, Windows 7, 8, 10 PC, TV and more.

The SmartiPi Touch Pro is a case for the Official Raspberry Pi display and Raspberry Pi 2, 3, and 4. There is also a mounting point below the display for the Official Raspberry Pi camera. The camera hole can be completely hidden with the included...

The SmartiPi Touch Pro is a case for the Official Raspberry Pi display and Raspberry Pi 2,3, and 4. There is also a mounting point below the display for the Official Raspberry Pi camera. The camera hole can be completely hidden with the included...

The SmartiPi Touch Pro is a case for the Official Raspberry Pi display and Raspberry Pi 2,3, and 4. There is also a mounting point below the display for the Official Raspberry Pi camera. The camera hole can be completely hidden with the included...

The SmartiPi Touch Pro is a case for the Official Raspberry Pi display and Raspberry Pi 2,3, and 4. There is also a mounting point below the display for the Official Raspberry Pi camera. The camera hole can be completely hidden with the included...

We"ve sourced a new LCD screen especially for our Pico Display Pack - it"s a lovely, bright 18-bit capable 240x135 pixel IPS display and fits the Pico...

Raspberry Pi 4 Touchscreen 7″ Case – Black. This is the OneNiceDesign Touch Screen Case for the Official Raspberry Pi 7" touchscreen display and the Raspberry Pi 4.

HyperPixel 4.0 is the perfect way to use your Pi without a bunch of cables or a bulky display. Design your own interface to control your project, display data, or turn your Pi into a...

The back for the cover for SmartiPi Touch 2 allows you to cover HAT boards or other additional electronics on the back of the SmartiPi Touch 2 . The covers include four M4 mounting screws that attach the cover to the 75mm VESA mount holes on...

The UCTRONICS 3.5 Inch touch screen is the same size as the standard Raspberry Pi model B/B+, and well-mates with the Raspberry Pi boards. With a tiny size, vivid image, and responsive touchscreen, it is definitely ideal for portable devices and multimedia projects. It is a great replacement for a heavy and bulky HDMI monitor, keyboard, and mouse

Step1: Align the pin 1 of the edge connector between the LCD display and Raspberry pi board, connect the pin 1,2,3,4 then pin 19,20,21,22,23,24,25,26.

Attention: If you use this display without a Pi, the touch function is not available because the touch function of this display just supports the Raspbian system. Meanwhile, an extra HDMI cable also is required for the video transmission.

» Makerfabs is Open Hardware, Arduino, Raspberry Pi, mbed, BeagleBone, IoT, Smart Home, etc, Related Products& Services Vendor for Makers and new Startups.