holley sniper 3.5 in lcd touch screen factory

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The shipping charges will be determined by our shipping department and you will be notified of the cost. This is the best way for us to give you the lowest cost on shipping your product.

After the shipping costs have been calculated, you will be sent an email with an updated link to your order. Your updated order will include your order"s shipping costs and be your original order with the letter "A" at the end. While checking for updates on your order please add an "A" to the end of your order number, as your order number without the "A" will show canceled since it has been superseded.

Our shipping department takes the same time and effort in packaging your products as our engineers do in designing them. However, damage can still occur in shipping. Most of these damaged items can be easily repaired during install and or in paint prep. If this is not the case, the buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and if need be, notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver’s presence. A signed receipt without any notation releases the carrier as well as SDHQ from any further damage claim. Discovery of damages after a clear delivery becomes the responsibility of the customer.

The buyer must notify SDHQ of any damages within 24 hours. In cases of damage with proper notion on receipt, the carrier will determine whether to pay for the repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to SDHQ and is not negotiable. All disputes about the settlement amount shall be addressed with the carrier. SDHQ, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.

Did the unthinkable happen to your original Sniper 3.5-inch Touchscreen LCD Display? Slammed in the door? Tossed out the window in a rollover? Drowned in your buddy"s Super Big Gulp®? We"ve got you covered with this replacement display.

Set up ECU Datalogging, Download Datalogs to SD Card, Upload and Download Global Folders via SD Card, Update ECU Firmware and Adjust Rev Limiters 1 and 2

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Holley EFI 3.5" Touch Screan LCD for use with all Terminator, HP, and Dominator EFI systems This touch screen LCD provides a dynamic range of tuning and data monitoring options in a compact, full color 3.5" LCD display.

*Set up ECU Datalogging, Download Datalogs to SD Card, Upload and Download Global Folders via SD Card, Update ECU Firmware and Adjust Rev Limiters 1 and 2

Warning: This product can expose you to chemicals that are known to the State of California to cause cancer. For more information, visit www.P65warnings.ca.gov.

All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or implied beyond this Limited Warranty.

In the event of an alleged defect in material or workmanship, Holley Performance Products responsibility is strictly limited to repair or replace the defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential or other damages incurred by use of any product of Holley Performance Products.

To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance Products.

This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements.

Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase.

Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog.

Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.

There are many performance benefits of running a Sniper EFI system, but one of the key points of any Holley Sniper is that you don’t need a laptop for programming the system. The supplied 3.5-inch color touchscreen provides easy access to the data and calibration points required to get the EFI system dialed-in for your system.

There’s a lot of useful data coursing through the handheld such as coolant temp, voltage, TPS, MAP and many other engine specifications that car-guys like to monitor while driving. All of these parameters can be viewed through the handheld in real time, but if you really want to keep a watchful eye on the details involving your Sniper EFI equipped engine, Holley just introduced a 5-inch Digital Dash that simply plugs-in and provides an easy-to-view look at your driveline’s operating parameters.

Sniper EFI users rejoice as Holley just introduced a new 5-inch Digital Dash that connects in place of the handheld programmer. Not only does it display engine data, it can also be used to tune the EFI system.

This new high-resolution screen is a direct descendent of Holley’s professional series of digital dashes used with the race-level Dominator and advanced Terminator EFI systems. The new 5-inch Dash provides three different displays of drivetrain information from the popular Sniper EFI systems such as throttle position, air/fuel ratio, manifold pressure, and more, plus it provides GPS signal for speed!

“The new 5-inch Dash provides an outstanding view of engine data in real time, saving you the hassle of installing additional gauges under the dash of your car,” Colin Kinser of Holley explained. “Not only does it function as a dash, but it also can be used as a touchscreen to tune and calibrate your Sniper EFI.” Being able to tune the Sniper EFI from the dash is one feature that even the higher-level digital dashes don’t have and really comes in handy if you want to tweak a rev limit or the ignition timing of the Sniper system.

The Sniper 5-Inch Dash has three different backgrounds to choose for your application. Notice the speedometer? The Dash comes with a GPS speedometer and antenna!

The new display has the same built-in Wizard technology that allows you to tweak and tune as you see fit while out on the road. It even provides the technology to data log details during a run or to assist in troubleshooting.

Another unique feature is the ability to mount the dash in the interior, and still use the handheld for tuning or watching engine vitals while you’re under the hood. “We offer a splitter harness, part number 558-465, that allows you to have the Digital Dash and the handheld connected,” Kinser said. “It really comes in handy while fine tuning your Sniper EFI system.”

The 5-Inch LCD Dash is more than just a pretty face – it also can be used to setup and calibrate your Sniper EFI system. Easily tap the screen to set parameters such as acceleration enrichment, the IAC or idle speed, air-fuel ratio and other EFI settings.

Another useful feature that the 5-inch Dash brings to your interior is a GPS based speedometer. Holley includes a magnetic GPS antenna so you can easily setup a speedometer which makes life much easier for vehicles with late model transmission swaps and old mechanical driven speedometers. The GPS speedometer is a snap to set up and has a matching tachometer display sharing the screen.

There are three pre-programmed background screens you can select to match the style or look of your interior and with the swipe of a finger you can view different screens that can be customized with different parameters. For example, you can have one screen for casual driving and another setup for racing. The high resolution screen is easy to view, even in bright sunlight, yet can easily be dimmed for night driving with a touch of the screen. Accurate, real-time driveline data, cool looks and easily customizable for your application, not to mention saving time money on duplicate sensors or other gauges.

Another useful feature that the 5-inch Dash brings to your interior is a GPS based speedometer. Holley includes a magnetic GPS antenna so you can easily setup a speedometer which makes life much easier for vehicles with late model transmission swaps and old mechanical driven speedometers. The GPS speedometer is a snap to set up and has a matching tachometer display sharing the screen.

“To help mount the 5-inch Digital Dash, we supply a sturdy suction cup mount with two different length stand-offs. This really eases where and how users can position the screen for their application,” Kinser pointed out. With its increased color intensity combined with twice the resolution of other screens, the new 5-inch dash delivers high tech data to the cabin of any vehicle running a Sniper EFI system in addition to touchscreen tuning capabilities.

This 3.5 Touch Screen LCD Handheld Controller gives you access to a wide range of tuning options. Additionally this display can be used as a fully customizable data monitor! With this 3.5 display your Sniper EFI system vitals can be viewed with a quick glance! Laptop-Free Tuning changes to help optimize mileage, drivability and performance. Basic Tuning options allow simple adjustments of Basic Fuel, Fuel Learn, Basic Idle, Spark, and More! System Tuning options allow modifications to Outputs, Engine Setup, Ignition Setup. Advanced Tuning options allow fine tuning of Fuel, Closed Loop, Learn, and Idle (including IAC parameters and Idle Spark). Monitor a vast number of Parameters in Pre-Configured Multi-Gauge and Monitor Screens, or customize your own. Set up ECU Datalogging, Download Datalogs to SD Card, Upload and Download Global Folders via SD Card, Update ECU Firmware and Adjust Rev Limiters 1 and 2.

Holley Performance Emission Code 5: This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled (Non-Emissions Controlled) Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations

Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors powered every Monster Energy NASCAR Cup team and nearly every NHRA Pro-Stock champion for four decades. Now, Holley EFI products power these cars and are dominating the performance world. Holley products for GM"s popular LS engine are dominating the LS scene as well. Holley"s products also include performance fuel pumps, intake manifolds and engine dress-up products for street performance, race and marine applications. As a single solution or partnered with products from other Holley companies we can give you the edge you need over the competition!

Set up ECU Datalogging, Download Datalogs to SD Card, Upload and Download Global Folders via SD Card, Update ECU Firmware and Adjust Rev Limiters 1 and 2

The I/O adapter adds ten inputs/outputs to the 7" digital dash. These inputs and outputs can then be configured as gauges or switches, and data logged locally through the digital dash