raspberry pi rgb 1602 lcd module in stock

LCD displays are a fun way to learn how to code with a Raspberry Pi, Arduino and most development boards, however they usually come with a lot of pin connections and a single backlight colour.

This Waveshare LCD1602 version of the classic 16x2 LCD Display has an RGB backlight, allowing you to select up to 16 million different colours for your project. It also features an I2C interface requiring just 4 pin connections, making wiring your project much easier and reducing cable spaghetti!

LCD1602 RGB ModuleIncorporates character LCD panel LCD1602, onboard AiP31068L LCD driver chip and PCA9633 RGB control chip, supports Raspberry Pi / Pi Pico, Jetson Nano, and Arduino^^16x2 Characters 1602 LCDIncorporates character LCD panel LCD1602, can display up to 16 X 2 characters, support screen scrolling, cursor movement and other functions^^Adjustable RGB Backlight ColorUp to 16M (2563) backlight colors available^^I2C Control InterfaceOnly two signal pins are required, saving the IO resource, for connecting with host boards like Raspberry Pi / Arduino^^ 3.3V /5V CompatibleCompatible with 3.3V /5V operating voltage, Dimension: 87.0 × 32.0 × 13.0 mm

This new Adafruit Pi Plate makes it easy to use an RGB 16×2 Character LCD. We really like the RGB Character LCDs we stock in the shop. (For RGB we have

With this in mind, we wanted to make it easier for people to get these LCD into their projects so we devised a Pi plate that lets you control a 16×2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the R-Pi! The best part is you don’t really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle.

This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.

The plate is designed for both Revision 1 and Revision 2 Raspberry Pi’s. It uses the I2C (SDA/SCL) pins. We have a special xtra-tall 26-pin header so the plate sits above the USB and Ethernet jacks. For Pi Model B+, the resistors sit right above the new set of USB ports. To keep them from shorting against the metal, a piece of electrical tape must be placed onto the USB ports.

This product comes as a kit! Included is a high quality PCB and all the components (buttons, header etc). A 16×2 Character RGB positive LCD is included! Assembly is easy, even if you’ve never soldered before and the kit can be completed in 30 minutes.

At this time, the code and plate can control the RGB backlight of our character LCDs by turning each LED on or off. This means you can display the following colors: Red, Yellow, Green, Teal, Blue, Violet, White and all off. There is no support for PWM control of the backlight at this time, so if you need to have more granular control of the RGB backlight to display a larger range of colors, this plate can’t do that (the I2C expander does not have PWM output).

The nice folks at Adafruit have put together a handy product tutorial page for assembly instructions before purchasing and some Python code to help you easily talk to the LCD and buttons You can also easily query the 5 keypad buttons to get input through the library, so you get extra buttons without using any more pins. The buttons are automatically de-bounced inside the library.

(At this time, the code and plate can control the RGB backlight of our character LCDs by turning each LED on or off. This means you can display the following colors: Red, Yellow, Green, Teal, Blue, Violet, White and all off. There is no support for PWM control of the backlight at this time, so if you need to have more granular control of the RGB backlight to display a larger range of colors then this plate can"t do that because the I2C expander does not have PWM output.)

This new Adafruit Pi Plate makes it easy to use an RGB 16x2 Character LCD. We really like the RGB Character LCDs we stock in the shop. (For RGB we haveRGB positive.) Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 3 to control the RGB backlight for a total of 9 pins. That"s nearly all the GPIO available on a Pi!

With this in mind, we wanted to make it easier for people to get these LCD into their projects so we devised a Pi plate that lets you controla 16x2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the R-Pi!The best part is you don"t really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle.

This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.

The plate is designed for both Revision 1 and Revision 2 Raspberry Pi"s. It uses the I2C (SDA/SCL) pins. We have a special xtra-tall 26-pin header so the plate sits above the USB and Ethernet jacks.For Pi Model B+ and Pi 2, the resistors sit right above the new set of USB ports. To keep them from shorting against the metal, a piece of electrical tape must be placed onto the USB ports.

This product comes as a kit!Included is a high quality PCB and all the components (buttons, header etc).A 16x2 Character RGB positive LCD is included!Assembly is easy, even if you"ve never soldered before and the kit can be completed in 30 minutes.Check the product tutorial page for assembly instructions before purchasing

We also have some handy Python code to help you easily talk to the LCD and buttonsYou can also easily query the 5 keypad buttons to get input through the library, so you get extra buttons without using any more pins. The buttons are automatically de-bounced inside the library.

At this time, the code and plate can control the RGB backlight of our character LCDs by turning each LED on or off. This means you can display the following colors: Red, Yellow, Green, Teal, Blue, Violet, White and all off. There is no support for PWM control of the backlight at this time, so if you need to have more granular control of the RGB backlight to display a larger range of colors, this plate can"t do that (the I2C expander does not have PWM output).