lcd panel va free sample

2023-01-03 12:32:11

A wide variety of va lcd panels options are available to you, such as original manufacturer, odm.You can also choose from tft, ips and standard va lcd panels,

lcd panel va free sample

Even after the introduction of newer display technologies, LCDs still remain relevant even today.LCD displays are used for multiple purposes (TV, Monitor, Mobile Phones, Laptops, Automobiles, etc.) and one single configuration cannot satisfy all the purposes. So, LCD displays come with two different panels – VA (Vertical Alignment) and IPS (In-Plane Switching) to satisfy the different viewing needs of consumers.

A VA panel offers a superior contrast ratio but a narrow viewing angle. Contrarily, an IPS panel offers a wide viewing angle but a low contrast ratio.

As mentioned earlier, displays with VA Panels provide a great contrast ratio. You can find VA panels that typically come with contrast ratios of 3000:1 or 6000:1. A comparable IPS panel will only have a contrast ratio of 1000:1.

VA panels have narrow viewing angles. You will only be able to have an immersive experience when you sit straight opposite the display. The wider angles will not provide you the same experience.

In this, the liquid crystals are arranged parallel to the glass substrate instead of the perpendicular alignment. Furthermore, the structure of crystals and the placement of electrodes differ from the one used in VA panels. The electrodes occupy more space that results in lower contrast and brightness of the screen.

With the IPS panels, you can view the TV / monitor from a wide-angle and still get an impressive picture quality. Unlike VA panels, you will notice very little difference in color reproduction when you sit at a wide-angle from the display.

But when it comes to black uniformity, the IPS panels are sub-par. These panels do a poor job in displaying a bright image in the center of a completely black screen.

One more major drawback with the IPS panels is that they exhibit a distinct phenomenon called ‘IPS Glow’. You will notice some light patches on the corners of the screen. This happens when excessive light is passed through the screen.

Initially, IPS panels are mainly used in TVs due to their wide viewing angles, as we can watch TV in our living room from anywhere. But due to their better quality, color accuracy and response time, LCD panels gradually occupied the high-end computer monitor and laptop screens

IPS:These panels have the highest color range. You will be able to enjoy a realistic gaming experience. Besides, they have better viewing angles. So, you won’t notice any drop in picture quality even when you are not sitting in front of your TV / monitor.

VA:Even though the color range is not as great as the IPS panel, it does a pretty good job in showing the color variations. But the viewing angle is narrow. So, you have to sit straight opposite the TV / monitor.

VA panel compensates for its decent color range with an impressive contrast ratio. You will be able to see great detailing in the difference between light and dark colors.

IPS:IPS panels have one of the highest refresh rates. While you easily find an IPS panel with a refresh rate of 144Hz, some of the latest ones come with a refresh rate of 360Hz. If you are a serious online-gamer, digital artist, or video editor, then you have to go with the highest refresh rate within your budget.

VA:VA panels have lower refresh rates than IPS panels. Most VA panels come with a refresh rate of 120Hz. If you want to have a higher refresh rate, then you have to be willing to spend extra. VA panels have a maximum refresh rate of 240Hz.

IPS:IPS panels generally come with a response time of 4 milliseconds. This would suffice for watching TV or playing most games. But, if you are playing racing games or first-person shooting games, you need to have a response time of less than 2 milliseconds.

VA:VA panels generally have a slower response time than IPS panels with 5 milliseconds. So, there is a higher chance for you to experience motion blur. But, some of the VA panels that come with an expensive price tag have faster response times.

IPS:When it comes to the viewing angle, IPS panels far outweigh the VA panels. They have wider viewing angles. You will experience no drop in picture quality even if you sit and watch the TV from an extreme angle.

VA:The VA panels have a very narrow viewing angle. You have to sit as close to the straight axis of the TV to enjoy the picture quality. If you sit wider, there will be a significant loss in the picture quality.

IPS:IPS panels do a decent job in the contrast ratio segment but they are nowhere close to that of VA panels. An IPS panel offers a contrast ratio of 1000:1. When you watch a black color environment in an IPS panel, the black color will be slightly greyed out.

VA:VA panels offer a superior contrast ratio of 6000:1 that is very impressive. It has the capacity to show dark environments as darker. So, you will enjoy the picture detailing shown by the VA panels.

IPS:IPS panels are not really great at displaying the uniform black color throughout the screen. Due to the low contrast ratio, the black color will appear slightly greyed out.

VA:VA panels have a good black uniformity. But it also depends on the TV model you go with. Not all TV models with a VA panel have good black uniformity. But it is safe to say that in general, VA panels have better black uniformity than an IPS panel.

To put it short, the main difference between the panels lies in the alignment of the liquid crystals. The alignment results in the differences in the performance and picture quality of the panels.

The VA panels are ideal for office/study use, high-end PC games, and online games. If you are looking for a panel for mixed usage, the VA panel should still suffice your needs.

lcd panel va free sample

There’s an almost overwhelming amount of options in the display market: OLED, MicroLED, and TN panel types just to name a few. But if you’re looking for a gaming monitor or simply don’t want to drain your bank account on a display, IPS and VA are generally the best choices. In-plane switching (or IPS) is an LCD-based technology that is used in just about every kind of display, whereas Vertical Alignment (or VA) is a more niche LCD technology used in gaming monitors, gaming TVs, and wide displays.

Although IPS is much more popular than VA and is often seen as the more premium option, both panel types have strengths and weaknesses that you should consider before you buy.

IPS panels have traditionally been used for making displays that have high color accuracy and large coverage of wide color gamuts like DCI-P3 or Adobe sRGB. Not only do IPS displays usually look good, but they also look good from wider angles, so you don’t need to look exactly head on at an IPS monitor to get accurate colors.

Color accuracy and coverage can be good on VA displays (even at wide angles), but colors across VA displays aren’t always uniform. Depending on the viewing angle and the distance between the viewer and the display, the center of VA monitors often have more gamma than the edges of the screen, making colors less accurate.

Although IPS is generally better than VA when it comes to color accuracy and coverage, VA panels have perfectly fine color accuracy and coverage for the vast majority of users. Only professional photo and video editors could really be disappointed with a VA monitor that only covers 90% of the DCI-P3 color space, which is actually a very good amount of coverage for gamers and content consumers.

Despite VA’s general color accuracy issues, it’s actually amazing at depicting black as truly black. Even the worst VA displays can easily muster a 2000:1 contrast ratio, and some can even achieve higher than 5000:1. In fact, VA is second only to OLED when it comes to contrast ratio, and OLED actually delivers perfect contrast ratios of ∞:1. Because of this, a VA display can look better than an IPS counterpart in darker scenes.

Some displays can boost contrast ratio by using local dimming and HDR. By using a more complex backlight with multiple LEDs that can be turned on or off, local dimming helps IPS and VA displays look even darker when it matters. On the other end of the spectrum, HDR boosts brightness for colors that need it. With these two factors combined, some displays can boost the contrast ratio significantly. However, these features aren’t going to make an IPS display’s contrast ratio as good as the average VA display’s, and poorly implemented local dimming can backfire by creating more visual problems than it solves.

Response time is the amount of time it takes to fully refresh the display and show a new image. This is an area where both IPS and VA struggle, but nowadays very good IPS displays have overcome traditional issues with response times, and VA displays have not shown the same amount of progress. There is no standard that display manufacturers adhere to when it comes to measuring response time, but according to BenQ, which makes both IPS and VA monitors and TVs, IPS has a response time of 1-2ms whereas VA can only achieve 4-5ms. The specific values here aren’t important because this is a best-case scenario. What’s really important is that VA is much slower.

Very high response times can result in very animated scenes looking blurry and smeared. This issue is called ghosting, and it’s particularly annoying for discerning gamers playing fast-paced games like Counter-Strike: Global Offensive. Both IPS and VA displays have solutions and workarounds to avoid ghosting, the most important being overdrive. Overdrive that’s too aggressive can cause reverse ghosting, which is when the display tries to change a pixel’s color so quickly that it accidentally overshoots and ends up with the wrong color for a few frames. Ghosting and reverse ghosting both cause smearing, so if overdrive is too weak or too strong, the end result is similar: It looks bad.

Although the best IPS panels beat the best VA panels when it comes to response time, there are plenty of IPS displays that have very bad response times. It’s also worth noting that response time only needs to be equal to the refresh rate of the monitor for there to be no smearing. On a 60Hz display, for instance, it takes 16.66ms to show a new image, so a response time of 1ms doesn’t really do much. Response time matters much more at higher refresh rates, and even at 144Hz a response time of around 7ms is sufficient to avoid ghosting.

IPS is capable of significantly higher refresh rates than VA. IPS is capable of hitting 500Hz while VA caps out at 240Hz. However, the vast majority of VA displays are only capable of 144Hz or 165Hz; there are only a few VA monitors that can do 240Hz. For those wanting extremely high refresh rates, IPS is the clear winner.

Even if VA was capable of 360Hz however, it probably wouldn’t be very good because of its weakness in response times. A 360Hz display refreshes every 2.7ms, which is well below what VA is generally capable of.

While IPS displays are usually a safe recommendation for most people, sometimes there are very good reasons to buy VA monitors and TVs. VA has found its home in midrange gaming monitors, gaming TVs, and ultrawide displays, and many of the best gaming monitors use VA. If you’re shopping outside of these categories, however, you probably won’t have to worry about choosing between IPS and VA because VA is not very often used elsewhere.

If you do have the choice between VA and IPS, you’re going to have to evaluate what you prefer in a display, and you should definitely read some monitor reviews just to make sure if VA or IPS is going to deliver what you want in your next display purchase. After all, even an IPS display can have bad color accuracy or bad response time, so don’t assume IPS means quality and that VA means budget.

lcd panel va free sample

So, why would anyone ever buy a TN panel? For starters, they’re cheap. They don’t cost a lot to produce, so they’re often used in the most budget-friendly options. If you don’t value color reproduction or need excellent viewing angles, a TN panel might be fine for your office or study.

TN panels also have the lowest input lag—typically around one millisecond. They can also handle high refresh rates of up to 240 Hz. This makes them an attractive option for competitive multiplayer games—especially eSports, where every split-second counts.

IPS technology was developed to improve upon the limitations of TN panels—most notably, the poor color reproduction and limited viewing angles. As a result, IPS panels are much better than TNs in both of these areas.

In particular, IPS panels have vastly superior viewing angles than TNs. This means you can view IPS panels from extreme angles and still get accurate color reproduction. Unlike TNs, you’ll notice very little shift in color when you view one from a less-than-ideal perspective.

IPS panels are also known for their relatively good black reproduction, which helps eliminate the “washed out” look you get with TN panels. However, IPS panels fall short of the excellent contrast ratios you’ll find on VAs.

While high refresh rates were typically reserved for TNs, more manufacturers are producing IPS panels with refresh rates of 240 Hz. For example, the 27-inch 1080p ASUS VG279QM uses an IPS panel and supports 280 Hz.

Previously, TNs exhibited less input lag than any other panel, but IPS technology has finally caught up. In June 2019, LG announced its new Nano IPS UltraGear monitors with a response time of one millisecond.

Despite the gap being closed, you’ll still pay more for an IPS panel with such a low response time than you would for a TN with similar specs. If you’re on a budget, expect a response time of around four milliseconds for a good IPS monitor.

One last thing to be aware of with IPS panels is a phenomenon called “IPS glow.” It’s when you see the display’s backlight shining through it at more extreme viewing angles. It’s not a huge problem unless you view the panel from the side, but it’s something to keep in mind.

VA panels are something of a compromise between TN and IPS. They offer the best contrast ratios, which is why TV manufacturers use them extensively. While an IPS monitor typically has a contrast ratio of 1000:1, it’s not unusual to see 3000:1 or 6000:1 in a comparable VA panel.

In terms of viewing angles, VAs can’t quite match the performance of IPS panels. Screen brightness, in particular, can vary based on the angle from which you’re viewing, but you won’t get the “IPS glow.”

VAs have slower response times than TNs and the newer Nano IPS panels with their one-millisecond response rates. You can find VA monitors with high refresh rates (240 Hz), but the latency can result in more ghosting and motion blur. For this reason, competitive gamers should avoid VA.

Compared to TNs, VA panels do offer much better color reproduction and typically hit the full sRGB spectrum, even on lower-end models. If you’re willing to spend a bit more, Samsung’s Quantum Dot SVA panels can hit 125 percent sRGB coverage.

For these reasons, VA panels are seen as the jack of all trades. They’re ideal for general use, but they either match or fall short in most other areas except contrast ratio. VAs are good for gamers who enjoy single-player or casual experiences.

When compared to CRT monitors, all LCD panels suffer from some form of latency issue. This was a real problem when TN panels first appeared, and it’s plagued IPS and VA monitors for years. But technology has moved on, and while many of these issues have been improved, they haven’t been eliminated entirely.

Uneven backlighting is another issue you’ll find on all panel types. Often this comes down to overall build quality—cheaper models slack on quality control to save on production costs. So, if you’re looking for a cheap monitor, be prepared for some uneven backlighting. However, you’ll mostly only notice it on solid or very dark backgrounds.

LCD panels are also susceptible to dead or stuck pixels. Different manufacturers and jurisdictions have different policies and consumer laws covering dead pixels. If you’re a perfectionist, check the manufacturer’s dead-pixel policy before you buy. Some will replace a monitor with a single dead pixel for free, while others require a minimum number.

Office or study use: Your budget should be your primary concern here. VA is the do-it-all panel, with superior viewing angles to TN, but either would do the trick. You can save some money because you don’t need high refresh rates or ultra-low latency. They’re still nice, though. You’ll see a noticeable difference in smoothness just when moving the Windows cursor on a monitor with a 144 versus 60 Hz refresh rate.

Photo and video editors/Digital artists: IPS panels are still generally favored for their ability to display a wide gamut of colors. It’s not unusual to find VA panels that also cover a wide gamut (125 percent sRGB, and over 90 percent DCI-P3), but they tend to exhibit more motion blur during fast-paced action than IPS panels. If you’re serious about color accuracy, you’ll need to properly calibrate your monitor.

Programmers who mount monitors vertically: You might think TN panels are great for programmers, but that’s not necessarily the case. TN panels have particularly bad viewing angles on the vertical axis. If you mount your monitor in portrait mode (as many programmers and mobile developers do), you’ll get the worst possible viewing angles from a TN panel. For the best possible viewing angles in this scenario, invest in an IPS display.

Competitive online gamers: There’s no question TN panels are still favored in the eSports world. Even the cheapest models have fast response times and support for high refresh rates. For 1080p gaming, a 24-inch will do just fine, or you could opt for a 1440p, 27-inch model without breaking the bank. You might want to go for an IPS panel as more low-latency models hit the market, but expect to pay more.

Non-competitive, high-end PC gamers: For a rich, immersive image that pops, a VA panel will provide a higher contrast ratio than IPS or TN. For deep blacks and a sharp, contrasting image, VA is the winner. If you’re okay with sacrificing some contrast, you can go the IPS route. However, we’d recommend avoiding TN altogether unless you play competitively.

Best all-rounder: VA is the winner here, but IPS is better in all areas except contrast ratio. If you can sacrifice contrast, an IPS panel will provide fairly low latency, decent blacks, and satisfactory color coverage.

lcd panel va free sample

In this guide, we’ll go over the differences between the most common monitor panels. We’ve compared IPS panels, TN panels, and VA panels to help give you more insight on your upcoming purchase.

However, the average consumer is clueless on the LCD panel technology used in their LCD monitor. A monitor’s panel type is a crucial feature that dictates how it performs as well as the kind of tasks it is best suited to accomplish. Therefore, it is important to understand panel technology so that you can be sure to choose the appropriate monitor for your gaming needs.

And, it is important for gamers to become familiar with these various panel technologies so that they can understand the variety of marketing buzzwords that companies use to describe the different LCD panel monitors on the market.

For instance, if you have $150 or less to spend, you’ll likely be forced to choose a TN panel. However, if you have more to spend, that doesn’t necessarily mean you will want to avoid a TN panel monitor, it just means that you will have more options.

This is an important question because the type of usage your monitor will see will be a big determining factor in which type of panel you can get. If you are going to use your monitor solely for competitive gaming—I’m talking CS:GO, LoL, COD, Dota 2, etc.—then a TN panel with a high refresh rate and low response time will be your best bet.

On the other hand, if you are more of a casual gamer, or you are planning on doing a lot of graphic design work on your monitor, you might want to look into a VA panel or an IPS panel. These panels don’t quite perform on the same level as a TN panel (in terms of response rate) and they cost a lot more for the same refresh rate. However, their picture quality is much better than TN panels and therefore, they are better-suited for graphics design work.

And, for that, a TN panel is your best bet as they offer lower response rates and higher refresh rates (at least, for the price you pay) than IPS or VA panels.

On the other hand, if you’re not playing super competitive games and you really enjoy the visual aspect of gaming, you’d be better off going with a VA or IPS panel as they offer better technology for displaying richer and more detailed visuals.

Some display types are appropriate for gaming, while others are best suited for graphics design. Other monitors are good for gamers who want the best visuals, while a different set of monitor panels work better for competitive gamers who need the most performance possible.

In this guide, we have broken down the different panel types and have explained their key features, as well as have compared them to their counterparts to help you better understand which type of panel would best meet your needs.

If you are looking at a monitor and it doesn’t clearly state what kind of panel it is, it’s probably safe to assume it’s a TN panel. What I mean by this is that, in most cases, for IPS panels and VA panels, the monitor manufacturer will include the panel type in the name of the monitor in an effort to make them stand out.

As I mentioned above, TN Panels owe their popularity to low manufacturing costs.However, they are also known for being able to deliver much higher response rates than IPS or VA panels. However, they are also known for being able to deliver much higher response rates than IPS or VA panels.

Because of their affordability, Twisted Nematic Displays with higher refresh rates (a feature you will pay more for) are more readily available than competing panels with high refresh rates.

The viewing angles on a TN panel are touted to be 160 degrees vertical and 170 degrees horizontal: these angles are considerably lower than the viewing angles presented by other panel technologies

Because of these problems, the consistency and color accuracy on a TN panel will suffer in comparison to IPS and VA panels, which, ultimately, makes this panel type less ideal for color-critical work such as photography and design, or even for gamers who want the best visuals possible.

The most notable selling point of In-Plane Switching panels is their consistency, improved viewing angles, and superior color accuracy when compared to other LCD technologies. Every color shade retains its unique identity and distinctiveness regardless of its position on the monitor.

These factors make IPS panels suitable monitors for graphic design work, as well as for gamers looking for the best visuals possible (but who don’t mind a drop in response rate.)

Perhaps the greatest strength of a VA panel is its ability to block light from the backlight when it isn’t wanted. This ability results in higher contrast ratios and deeper blacks which are several times better than that of the other LCD technologies discussed in this guide.

As power users already understand, one problem with LCD monitors is light from the backlight. When an LCD monitor wants to display black, the color filter will be positioned in such a manner that very little light from the backlight will seep through. While they try to do a reasonable job, their filters aren’t always perfect, thus, incapable of rendering the blacks deep as they should be.

Thankfully, VA panels are magnificent at that task. And thanks to the fact that they are susceptible to clouding or bleeding towards the edges of the screen, the screens are often considered as ideal candidates for movie enthusiasts and suitable for general purpose work.

The VA panels also feature improved viewing angles and good color reproduction. Their excellent color reproduction abilities make the monitors ideal devices for color-critical work, or for gamers who want to play their games with the best picture quality possible.

A considerable drawback of the VA panel is its low level of responsiveness with its pixels transitioning from one state to the next. This can cause more noticeable blurring when gaming.

Thankfully, the more modern versions of VA panels use a superior pixel overdrive feature that is not susceptible to the problems of the earlier versions.

It is quite difficult to state definitively what LCD monitor is better in the battle of TN vs IPS. This is because both TN LCD displays and IPS LCD displays have a share of advantages and disadvantages.

The quick responsiveness of TN panels makes them suitable for competitive gamers who rely on every split-second to achieve victory. (Though there is a lot of debate surrounding this considering that some believe that the average human brain can just compute about 25 frames per second.) The response time of most TN Panels, save for the high-end and very exceptional ones, is between 2ms and 5ms. This quick response rate is why gamers love TN Panels, as they are perfect for fast-paced games.

IPS Panels, on the other hand, feature a rather sluggish response time compared with TN panels. But the good news is that IPS technology is improving with each new generation of monitors.

IPS Panels owe their popularity to superior viewing angles. They are also not susceptible to color washout when viewing at an angle, which is a problem that is very common with traditional TN panels.

TN panels suffer from limited viewing angles, especially when looking from a vertical position. Colors tend to shift if viewed from an off-perpendicular position. When viewing TN panels from vertical positions, colors will change so much that they’ll invert past a certain angle.

The reason is that higher resolution monitors typically cost more and, so, if you’re going to pay all of that money for an ultra high definition monitor, you might as well get the panel that is best suited for displaying high-end visuals.

Of course, if you want a balance between higher resolutions and lower response rates, you might be better off sacrificing some in the visual department and going with a TN panel to get a monitor with a better response rate.

Both VA and IPS panels are commonly used in LED-backlit TVs today. Though they are both Liquid Crystal Display types, there are vast differences between their performances. The differences touch on contrast, viewing angle, response time, and black uniformity.

IPS Panels are a clear winner when it comes to viewing angle. IPS Panels, as already explained, have a wide viewing angle without any noticeable drop in image quality on the monitor.

VA panels recoup their losses when it comes to contrast. Contrast, as you might be aware, is one of the most important factors when it comes to picture quality. VA surpasses IPS panels when it comes to contrast.

When in a dark environment, black images or shades will appear gray on an IPS panel, considerably undermining the experience. VA contrast ratios are usually in the range of 3000:1 to 6000:1 while IPS contrast ratios are around 1000:1.

Neither VA panels or IPS panels are ideal if one of the main features you are looking for in a monitor is response rate. However, of the two, VA panels offer a slightly faster response time than IPS panels.

VA panels, on the other hand, were built specifically to address the deficiencies in both TN Panels and IPS panels. Their response time is slightly faster than the response time of IPS panels yet considerably lower than the response time of TN panels.

There have been improvements on TN panels to make them more suitable for color-critical work such as photo editing, but even with the said improvements, TN panels are still far from ideal when it comes to these types of tasks.

From a visual standpoint, VA panels are better than TN panels as they are capable of 8-bit color depth as well as wider viewing angles. They also feature better black uniformity and high contrast ratios as compared to TN panels.

In my opinion, though, the choice between a TN panel and VA panel is somewhat similar to the choice between a TN panel and an IPS panel: choose an IPS panel if you are mostly into competitive gaming and pick a VA panel if you want better visuals.

If you are a competitive gamer, nothing will serve you better than a TN panel. TN panels might have weaker images, low contrast, and limited viewing angles, but they offer very fast response times.

However, if you are into the best visuals possible and you want images that are more crisp and detailed while you game, then the ideal panel for you is an IPS panel. IPS panels are excellent in reproducing color. They also come with a wide viewing angle, which is a feature well-suited for graphic design artists.

VA panels are the compromise panel. They offer accurate colors and wide viewing angles, almost comparable to IPS panels. Their response time is a little slower than that of TN panels, but also a little faster than IPS panels. So, if you want to get a monitor that brings balance to what a TN panel and IPS panel bring, VA panels are the way to go.

At the end of the day, TN panels are probably the most popular option for serious gamers. They are more affordable and perform better in competitive scenarios.

lcd panel va free sample