optical viewfinder for 3.2 lcd displays price

The Z-Finder Pro 2.5x for 3.2” screens is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 2.5x for 3.2” screens comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective and a mounting system designed for 3.2” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.

The 2.5x magnification is recommended in particular for users who are and may have problems seeing long distances. The Z-Finder Pro 2.5x for 3.2” screens has a diopter range of -4.75 and up (unlimited with extender frames). This is the model we use with our electronic viewfinder packages.

The Z-Finder Pro attaches to your camera with the included Gorilla Plate V2 and Z-Finder 3.2" Mounting Frame for Small DSLR Bodies.  The Gorilla Plate V2 attaches to the bottom of your camera using a ¼ 20” screw and has ¼ 20” screw holes underneath to attach a tripod plate. The metal Z-Finder Mounting Frame attaches to the Gorilla Baseplate using the provided red thumb screws. The Z-finder itself pops on and off the Z-finder Mounting frame. No magnets or glue are used. The metal Z-Finder Mounting Frame is backed with rubber to prevent scratching or slippage. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release.

1. All Z-finder bodies are the same size and can fit on any of our frames. The Z-Finder Pro 2.5x for 3.2” screens comes standard with a 3.2” Z-Finder Mounting Frame for Small DSLR Bodies.  Any other frames need to be purchased in addition to the Z-Finder.

2. The tapped holes on the bottom of the Gorilla Plate V2 are offset from the center of the lens for use with some of our equipment. This is only a concern if you are using the Gorilla plate with other rigs that do not have to side movement and need the matte box in line with the lens/mounting screw hole. To compensate for this issue, you can either use an adhesive mounting frame to attach the Z-finder or add a Gorilla Plate Adapter to your plate. Our Gorilla Plate Adapter centers the tripod holes on the bottom of the gorilla plate. Please note that this adapter does come with a longer 1/4 20" screw that will replace the smaller 1/4 20" screw that comes with the Gorilla Plate. You will need to take your screw out and use the longer one provided with the adapter to attach your camera to the plate.

3. In order for the Gorilla Plate and mounting frame to correctly align with the LCD the plate needs to be directly underneath your camera. This means it cannot be used in combination with L brackets like Really Right Stuff or contour plates like Arca Swiss. You can use an adhesive frame on your camera with our Z-finder and continue using your camera specific plates as usual.

WARNING The Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property. Caution should be taken to avoid direct . Proper use of the included lens cap and sun mask will dramatically reduce but not eliminate risk.

Conveniently Collapsible: Shrink your HoodLoupe viewfinder by pressing its ends together shortening its length from 3.25" to 2.25" in one quick press Glare-Free Photos & Videos:...

desertcart is the best online shopping platform where you can buy Hoodman Compact HoodLoupe Optical Viewfinder for 3.2" LCD Displays from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the Hoodman Compact HoodLoupe Optical Viewfinder for 3.2" LCD Displays to and more cities in Bahamas. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Hoodman Compact HoodLoupe Optical Viewfinder for 3.2" LCD Displays speedily without the hassle of shipping, customs or duties.

desertcart buys Hoodman Compact HoodLoupe Optical Viewfinder for 3.2" LCD Displays directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy Hoodman Compact HoodLoupe Optical Viewfinder for 3.2" LCD Displays from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

We recommend checking out our discussion threads on the Hoodman HoodLoupe Optical Viewfinder for 3.2" LCD H32, which address similar problems with connecting and setting up LCD Hoods & Shades Hoodman.

User manual for the Hoodman HoodLoupe Optical Viewfinder for 3.2" LCD H32 The user manual for the Hoodman HoodLoupe Optical Viewfinder for 3.2" LCD H32 provides necessary instructions for the proper use of the product Photography - Photo Accessories - LCD Hoods & Shades.

The HoodLoupe Optical Viewfinder for 3.2" LCD Displays is used to make a close inspection of images as you review them on your DSLR camera"s LCD monitor. The viewfinder isolates the display from ambient light so you will not be distracted by reflections or shadows during use. It will provide full coverage of an LCD monitor up to 3.2" diagonally with a standard (3:2) aspect ratio.

If you own a Hoodman lcd hoods & shades and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the Hoodman HoodLoupe Optical Viewfinder for 3.2" LCD H32 in the following formats: *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.

The user manual for the Hoodman HoodLoupe Optical Viewfinder for 3.2" LCD H32 can be downloaded in .pdf format if it did not come with your new lcd hoods & shades, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other Hoodman users keep a unique electronic library for Hoodman lcd hoods & shadess, where you can use our link to download the user manual for the Hoodman HoodLoupe Optical Viewfinder for 3.2" LCD H32.

The user manual lists all of the functions of the Hoodman HoodLoupe Optical Viewfinder for 3.2" LCD H32, all the basic and advanced features and tells you how to use the lcd hoods & shades. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from Hoodman service.

If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the Hoodman HoodLoupe Optical Viewfinder for 3.2" LCD H32. User manuals are also available on the Hoodman website under Photography - Photo Accessories - LCD Hoods & Shades.

If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

The Z-Finder Pro 2.5x for 3.2” screens is our standard Z-Finder Pro 2.5x packaged with a Z-Finder 3.2” Mounting Frame for Small Body DSLRs. This frame is compatible with small body cameras with 3.2” screens like the Canon 5D Mark IV and Mark III and the Nikon D800. This is not a new Z-finder.

The Z-Finder Pro 2.5x for 3.2” screens is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 2.5x for 3.2” screens comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3.2” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.

The 2.5x magnification is recommended in particular for users who are near sighted and may have problems seeing long distances. The Z-Finder Pro 2.5x for 3.2” screens has a diopter range of -4.75 and up (unlimited with extender frames). This is the model we use with our electronic viewfinder packages.

The Z-Finder Pro attaches to your camera with the included Gorilla Plate V2 and Z-Finder 3.2" Mounting Frame for Small DSLR Bodies. (The Z-Finder Mounting Frame can also be attached to our Mini DSLR Baseplate. ) The Gorilla Plate V2 attaches to the bottom of your camera using a ¼ 20” screw and has ¼ 20” screw holes underneath to attach a tripod plate. The metal Z-Finder Mounting Frame attaches to the Gorilla Baseplate using the provided red thumb screws. The Z-finder itself pops on and off the Z-finder Mounting frame. No magnets or glue are used. The metal Z-Finder Mounting Frame is backed with rubber to prevent scratching or slippage. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release.

1. All Z-finder bodies are the same size and can fit on any of our frames. The Z-Finder Pro 2.5x for 3.2” screens comes standard with a 3.2” Z-Finder Mounting Frame for Small DSLR Bodies. That will fit a standard small body DSLR with a 3.2” screen like the Canon 5D MIII or Nikon D800/600. Any other frames need to be purchased in addition to the Z-Finder. You can find a la carte frames for tall cameras, battery grips, 3” LCD screens, and our adhesive frame here. You can find a Z-finder Pro 2.5x packaged with a mounting frame for small body DSLRs with 3” LCD screens (Canon 5D MII/7D/550D, Nikon D5100/3000) here.

2. The tapped holes on the bottom of the Gorilla Plate V2 are offset from the center of the lens for use with some of our equipment. This is only a concern if you are using the Gorilla plate with other rigs that do not have side to side movement and need the matte box in line with the lens/mounting screw hole. To compensate for this issue, you can either use an adhesive mounting frame to attach the Z-finder or add a Gorilla Plate Adapter to your plate. Our Gorilla Plate Adapter centers the tripod holes on the bottom of the gorilla plate. Please note that this adapter does come with a longer 1/4 20" screw that will replace the smaller 1/4 20" screw that comes with the Gorilla Plate. You will need to take your screw out and use the longer one provided with the adapter to attach your camera to the plate.

3. In order for the Gorilla Plate and mounting frame to correctly align with the LCD screen the plate needs to be directly underneath your camera. This means it cannot be used in combination with L brackets like Really Right Stuff or camera specific contour plates like Arca Swiss. You can use an adhesive frame on your camera with our Z-finder and continue using your camera specific plates as usual.

We use cookies. Some of them are technically necessary (for example for the shopping cart), others help us improve our website and to offer you a better user experience. Privacy Policy.

You accept the following cookies by clicking on Accept all. You will find further information in the privacy settings, where you can also change your selection at any time. Just go to the page with the privacy policy.

The Z-Finder Pro 2.5x for 3.2" Screens from Zacuto is an optical viewfinder that videographers may find necessary for shooting sharp, stable video on DSLR cameras like the Canon 5D MkIII, Nikon D800, or others with the same size LCD display.

Whether shooting handheld or on a tripod, the Z-Finder Pro turns your camera"s 3.2" LCD screen into a clear, easy-to-focus viewfinder that lets you see your image in magnified detail, even under the brightest sunlight. Just as crucially, the Z-Finder Pro provides an extra degree of handling comfort and a crucial point of contact--between camera and eye--that adds stability to any handheld video.

The Pro 2.5x version offers an adjustable diopter for near or far sighted users, and the LCD image is enlarged by a factor of 2.5x, so you can see every detail for pinpoint focus. The diopter"s extended range of -4.75 and up makes it especially useful for those who are nearsighted. The Z-Finder attaches to your camera via the included Gorilla Baseplate and mounting frame, which mount to the bottom of your camera using a standard 1/4"-20 screw. A non-stick rubber backing ensures a tight fit and prevents scratching of the LCD screen, so that the entire Z-Finder snaps off easily when not in use. Once detached, the unit can hang conveniently around your neck from the included lanyard.