raspberry pi 3 tft lcd shield quotation

The touch screen LCD is ready with 320×480 resolution, 50 FPS (Frame per second). Resistive touch control is being supported by the Raspberry Pi OS or Raspbian (directly-pluggable). However, we will still need to install the driver for graphic display :)

However, there is a dedicated case/enclosure and a low-profile heatsink with a fan for this LCD to fit perfectly on the Raspberry Pi 4 Model B. The case has an opening for the LCD, and the low-profile heatsink with a fan keeps the Raspberry Pi 4 Model B protected and cool! You get a perfect console :) Don"t forget to remove the top lid/cover of the enclosure for the 3.5-inch LCD.

Note: The Raspberry Pi 4 Model B, 3.5-inch Enclosure, and the Low-Profile Heatsink with a fan are NOT INCLUDED in this product, please get them separately.

As we understand, Raspberry Pi 4 Model B delivers great performance and of course, more power will generate more heat as of all CPU :) So we need a way to install an additional heatsink to dissipate the extra heat. It will be better if we can have the option to add a cooling fan for active cooling. Well, this 3.5-inch touch screen LCD comes ready with the heatsink and cooling fan for you to use with the Raspberry Pi 4 Model B. it solves all the concerns.

The 3.5-inch touch screen uses the GPIO on the Raspberry Pi board, so it stretches out 2 pins as the power to supply the cooling fan on the low profile heatsink, and keep the Raspberry Pi board cool!

Note: The Raspberry Pi 4 Model B, 3.5-inch Enclosure, and the Low-Profile Heatsink with a fan are NOT INCLUDED in this product, please get them separately.

The Graphic driver is provided and can be downloaded for Raspberry Pi OS/Raspbian. It also supports Ubuntu and Kali Linux. Do follow the steps here: http://www.lcdwiki.com/MHS-3.5inch_RPi_Display

Note: Please use the recommended system for the touch screen. If another system is used, it may not have the touch function or may not work. You need to configure it yourself. Because there are many systems that the Raspberry Pi can use, we can’t make every system compatible with the touch screen.

This small 3.5 inch touch screen Raspberry Pi Display module is designed especially for Raspberry Pi, using the latest Linux Core system. This is ideal for DIY anywhere, anytime and does not require any separate power source or case to hold it. The module sits right on top of Pi and an ideal alternative solution for HDMI monitors. The screen also comes with a stylus to interact with the small screen.

This is a 3.2 inch Raspberry Pi LCD 320x240 Resistive Touch Screen TFT Display SPI LCD. It is commonly compatible with Raspberry Pi 3 Model B/2/B+/A. This resistive touch screen TFT LCD designed to work directly with Raspberry Pi, Raspbian. A Touch pen is also included for effective touch interface. It supports on screen key board, it makes a stand alone system, no need of any external keyboard or mouse.

Mango PLA 1.75mm 3D Printing Filament 1kg - Yellow is a high quality filament with 1.75mm diameter and 1kg Spool. This Filaments are Made In India wit..

The 3.7V 1 x 18650 plastic battery holder for lithium batteries case can use 1 x 18650 batteries to supply any power system using 3.7V. the battery ho..

PWM DC 6V 12V 24V 28V 3A Motor Speed Regulator Control Switch allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC vo..

LTC1871 DC-DC High Power Adjustable Step-up Module 3.0~35V to 3.5~35V 100W with Digital Display Voltmeter is a automatic booster module provides stabl..

The LCD Electronic Fish Tank Water Detector Thermometer can make sure you know exactly what is the ambient temperature of your fish tank.For Measuring..

The MAX30102 Pulse Oximeter Heart Rate Sensor Module for Wearable I2C Interface provides a complete system solution to ease the design-in process for ..

Traditionally, the M3 Headed Bed Adjusting Nut Type B for 3D Printers is fastened with ordinary M3 screws and nuts which allow the surface to be adjus..

The SIM800A Quad Band GSM/GPRS Modem with RS232 Interface is a complete Quad-band GSM/GPRS solution in a LGA(Land grid array) type which can be embedd..

Arduino Leonardo R3 Board Micro-USBs is Leonardo Board, Arduino"s first development board to use one microcontroller with built-in USB. Using the ATme..

Please Note: We will be closing on the 23rd December 2022 and will re-open on the 03rd January 2023. All existing orders will be shipped out if placed before 23rd December. New Orders from the 23rd will be shipped out when we re-open in the new year. We thank and appreciate you for the ongoing support. Festive Season greetings and a very happy new year! Stay Blessed. Neotronics SA.

This TFT LCD Display for Raspberry Pi has 5″ size which features 800×480 pixel resolution. Getting the Pi onto the display board is easy enough! make use of stand-off screws included in this pack to put the Raspberry Pi on the display board. But while you do this please ensure that the HDMI ports of both the Display and the Pi would line up with each other so that you will take advantage of the HDMI connector that we are providing in this product pack.

This 5 Inch Touch Screen HDMI Interface TFT LCD Module is a mini panel-mountable HDMI monitor. Small and simple, yet you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to an electronic product.

It features efficient operation by equipping the Backlight Power switch with which you can control the backlight whether to be on and off to save power. It has a 13×2 Pin Socket from where one can get 5V Power from Raspberry Pi to LCD and at the same time, transfer the touch signal back to Raspberry Pi. It also features an extended interface which is the replica of a 13×2 Pin Socket.

This is a flexible E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports partial ..

This is a 7" IPS Capacitive Touch Screen LCD with Toughened Glass Cover and has a 1024 x 600 resolution. The display supports popular mini PCs such as Ra..

This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface.

The Adafruit 2.23" Monochrome OLED Bonnet for Raspberry Pi comes with a 2.13" diagonal monochrome 128x32 OLED, with sharp white pixels. The OLED the ..

The OLED Bonnet Pack for Raspberry Pi Zero sets you up with the Pi Zero W, and Adafruit"s popular 128x64 OLED Bonnet. This version has 128x64 pixels (instead of 128x32) ..

The Adafruit 1.3" Color TFT Bonnet for Raspberry Pi has 240x240 color pixels in an IPS TFT display controlled over SPI. This display is super small, only about ..

The Adafruit RGB Matrix Bonnet allows you to create a dazzling display with your Raspberry Pi. These boards plug into your Pi and makes it super easy to control RGB matrice..

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white..

This is an E-Ink raw display, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color di..

This is an E-Ink raw display, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color..

This is an E-Ink raw display, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color disp..

This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color d..

This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color disp..

This is an E-Ink raw display, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color d..

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports parti..

This is an E-Ink raw display, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color disp..

This is a 5inch IPS display for the Raspberry Pi. The compact design makes it suitable for all various projects. The display has a resolution of 800x480, a refresh rat..

Trying to add a control interface for your Pi? This compact display would be the ideal choice. This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x2..

This is a beautiful bright 13.3" display with Capacitive Touch and great angle-visibility. The display can be driven with directly via Raspberry Pi connec..

This Dot Matrix display for the Raspberry Pi use the very popular MAX7219 display driver. It use 2 x 8x8 Red Led matrix displays. This is a very bright and clear di..

This a small IPS color screen, the color is more vivid than ordinary TFT LCD screens. The resolution is 80 x 160, and the display direction can be adjusted to vie..

Sometimes your Pi projects require a display to output system information, e.g. system status, temperature, IP address, etc. Having a full sized displa..

A portable hand-held game console programmed with CircuitPython, designed by Radomir Dopieralski, perfect for game programming and electronics workshops. When..

This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports red, black, an..

The new 3.2 inch display for Raspberry Pi features a 320x240 hardware resolution, incorporating a resistive touch control for seamless control at your fingertips. ..

This is a 2x16 character RGB LCD with Keypad plate for Raspberry Pi. DF Robot have made improvements in the wiring connection based on the previous LCD display..

The TFT Interface is HAT-like board that snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what ..

This is a 1.28” LCD Display Module with an input voltage of 3.3V ~ 5.5V, which is used to display colorful patterns and characters. The driver used in this LCD is GC9A0..

This is a beautiful bright 11.6" display with Capacitive Touch and great angle-visibility. The display can be driven with directly via Raspberry Pi connector o..

This IPS display makes use of the ST7789 which is a single-chip controller/driver for 262K-colour, graphic type TFT-LCD. The resolution of this LCD is 240x320, and ..

The Wave 4" IPS display has a direct interface for the Raspberry Pi and also a HDMI interface for other Embedded systems. The display comes a capacitiv..

The Wave 4" IPS display has a direct interface for the Raspberry Pi and also a HDMI interface for other Embedded systems. The display comes a resistive ..

This IPS display with HDMI input supports multiple platforms. Hardware resolutions is rated at 800x400 pixels but via software this can be extended to 1920x1080 pixels. Supp..

This Wave 5-inch Capacitive Touch Screen LCD has a resolution of 800×480 and a capacitive touch panel, which supports Raspberry Pi and can also be us..

The Wave 5" display has a direct Pi interface and HDMI port for Raspberry Pi. The display comes a touchscreen and has a resolution of 800x480 with a L..

This is an E-Ink raw display, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low powe..

The new 3.5 inch display for Raspberry Pi features a 480x320 hardware resolution, incorporating a resistive touch control for seamless control at your fingertips. Thi..

This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface. The disp..

The 7” Touchscreen Monitor for Raspberry Pi & your StakeBox gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pis. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard will be integrated into the latest Raspbian OS for full functionality without a physical keyboard or mouse.

Make your own ‘Internet of Things’ (IoT) devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you’re ready to create your own home automation devices with touch screen capability.

A range of educational software and programs available on the Raspberry Pi will be touch enabled, making learning and programming easier on the Raspberry Pi.

Compatible With: Raspberry Pi 3 Model B, Raspberry Pi 2 Model B, Raspberry Pi Model B+, and Raspberry Pi Model A+ The display currently does not work with the older Raspberry Pi Model A or B, however there may be a software update to enable compatibility in the future. Additionally, you will need to make sure your Raspberry Pi software is fully up to date as the display may not work with older firmware versions. N.B. The Raspberry Pi Board and Power Supply are not included in this kit, and are sold separately