wiki tft display price

The TFT-LCD (Flat Panel) Antitrust Litigationclass-action lawsuit regarding the worldwide conspiracy to coordinate the prices of Thin-Film Transistor-Liquid Crystal Display (TFT-LCD) panels, which are used to make laptop computers, computer monitors and televisions, between 1999 and 2006. In March 2010, Judge Susan Illston certified two nationwide classes of persons and entities that directly and indirectly purchased TFT-LCDs – for panel purchasers and purchasers of TFT-LCD integrated products; the litigation was followed by multiple suits.

TFT-LCDs are used in flat-panel televisions, laptop and computer monitors, mobile phones, personal digital assistants, semiconductors and other devices;

The companies involved, which later became the Defendants, were Taiwanese companies AU Optronics (AUO), Chi Mei, Chunghwa Picture Tubes (Chunghwa), and HannStar; Korean companies LG Display and Samsung; and Japanese companies Hitachi, Sharp and Toshiba.cartel which took place between January 1, 1999, through December 31, 2006, and which was designed to illegally reduce competition and thus inflate prices for LCD panels. The companies exchanged information on future production planning, capacity use, pricing and other commercial conditions.European Commission concluded that the companies were aware they were violating competition rules, and took steps to conceal the venue and results of the meetings; a document by the conspirators requested everybody involved "to take care of security/confidentiality matters and to limit written communication".

In November 2008, LG, Chunghwa, Hitachi, Epson, and Chi Mei pleaded guilty to criminal charges of fixing prices of TFT-LCD panels sold in the U.S. and agreed to pay criminal fines (see chart).

Sharp Corp. pleaded guilty to three separate conspiracies to fix the prices of TFT-LCD panels sold to Dell Inc., Apple Computer Inc. and Motorola Inc., and was sentenced to pay a $120 million criminal fine,

In South Korea, regulators imposed the largest fine the country had ever imposed in an international cartel case, and fined Samsung Electronics and LG Display ₩92.29 billion and ₩65.52 billion, respectively. AU Optronics was fined ₩28.53 billion, Chimmei Innolux ₩1.55 billion, Chungwa ₩290 million and HannStar ₩870 million.

Seven executives from Japanese and South Korean LCD companies were indicted in the U.S. Four were charged with participating as co-conspirators in the conspiracy and sentenced to prison terms – including LG"s Vice President of Monitor Sales, Chunghwa"s chairman, its chief executive officer, and its Vice President of LCD Sales – for "participating in meetings, conversations and communications in Taiwan, South Korea and the United States to discuss the prices of TFT-LCD panels; agreeing during these meetings, conversations and communications to charge prices of TFT-LCD panels at certain predetermined levels; issuing price quotations in accordance with the agreements reached; exchanging information on sales of TFT-LCD panels for the purpose of monitoring and enforcing adherence to the agreed-upon prices; and authorizing, ordering and consenting to the participation of subordinate employees in the conspiracy."

On December 8, 2010, the European Commission announced it had fined six of the LCD companies involved in a total of €648 million (Samsung Electronics received full immunity under the commission"s 2002 Leniency Notice) – LG Display, AU Optronics, Chimei, Chunghwa Picture and HannStar Display Corporation.

On July 3, 2012, a U.S. federal jury ruled that the remaining defendant, Toshiba Corporation, which denied any wrongdoing, participated in the conspiracy to fix prices of TFT-LCDs and returned a verdict in favor of the plaintiff class. Following the trial, Toshiba agreed to resolve the case by paying the class $30 million.

A thin-film-transistor liquid-crystal display (TFT LCD) is a variant of a liquid-crystal display that uses thin-film-transistor technologyactive matrix LCD, in contrast to passive matrix LCDs or simple, direct-driven (i.e. with segments directly connected to electronics outside the LCD) LCDs with a few segments.

In February 1957, John Wallmark of RCA filed a patent for a thin film MOSFET. Paul K. Weimer, also of RCA implemented Wallmark"s ideas and developed the thin-film transistor (TFT) in 1962, a type of MOSFET distinct from the standard bulk MOSFET. It was made with thin films of cadmium selenide and cadmium sulfide. The idea of a TFT-based liquid-crystal display (LCD) was conceived by Bernard Lechner of RCA Laboratories in 1968. In 1971, Lechner, F. J. Marlowe, E. O. Nester and J. Tults demonstrated a 2-by-18 matrix display driven by a hybrid circuit using the dynamic scattering mode of LCDs.T. Peter Brody, J. A. Asars and G. D. Dixon at Westinghouse Research Laboratories developed a CdSe (cadmium selenide) TFT, which they used to demonstrate the first CdSe thin-film-transistor liquid-crystal display (TFT LCD).active-matrix liquid-crystal display (AM LCD) using CdSe TFTs in 1974, and then Brody coined the term "active matrix" in 1975.high-resolution and high-quality electronic visual display devices use TFT-based active matrix displays.

The liquid crystal displays used in calculators and other devices with similarly simple displays have direct-driven image elements, and therefore a voltage can be easily applied across just one segment of these types of displays without interfering with the other segments. This would be impractical for a large display, because it would have a large number of (color) picture elements (pixels), and thus it would require millions of connections, both top and bottom for each one of the three colors (red, green and blue) of every pixel. To avoid this issue, the pixels are addressed in rows and columns, reducing the connection count from millions down to thousands. The column and row wires attach to transistor switches, one for each pixel. The one-way current passing characteristic of the transistor prevents the charge that is being applied to each pixel from being drained between refreshes to a display"s image. Each pixel is a small capacitor with a layer of insulating liquid crystal sandwiched between transparent conductive ITO layers.

The circuit layout process of a TFT-LCD is very similar to that of semiconductor products. However, rather than fabricating the transistors from silicon, that is formed into a crystalline silicon wafer, they are made from a thin film of amorphous silicon that is deposited on a glass panel. The silicon layer for TFT-LCDs is typically deposited using the PECVD process.

Polycrystalline silicon is sometimes used in displays requiring higher TFT performance. Examples include small high-resolution displays such as those found in projectors or viewfinders. Amorphous silicon-based TFTs are by far the most common, due to their lower production cost, whereas polycrystalline silicon TFTs are more costly and much more difficult to produce.

The twisted nematic display is one of the oldest and frequently cheapest kind of LCD display technologies available. TN displays benefit from fast pixel response times and less smearing than other LCD display technology, but suffer from poor color reproduction and limited viewing angles, especially in the vertical direction. Colors will shift, potentially to the point of completely inverting, when viewed at an angle that is not perpendicular to the display. Modern, high end consumer products have developed methods to overcome the technology"s shortcomings, such as RTC (Response Time Compensation / Overdrive) technologies. Modern TN displays can look significantly better than older TN displays from decades earlier, but overall TN has inferior viewing angles and poor color in comparison to other technology.

Most TN panels can represent colors using only six bits per RGB channel, or 18 bit in total, and are unable to display the 16.7 million color shades (24-bit truecolor) that are available using 24-bit color. Instead, these panels display interpolated 24-bit color using a dithering method that combines adjacent pixels to simulate the desired shade. They can also use a form of temporal dithering called Frame Rate Control (FRC), which cycles between different shades with each new frame to simulate an intermediate shade. Such 18 bit panels with dithering are sometimes advertised as having "16.2 million colors". These color simulation methods are noticeable to many people and highly bothersome to some.gamut (often referred to as a percentage of the NTSC 1953 color gamut) are also due to backlighting technology. It is not uncommon for older displays to range from 10% to 26% of the NTSC color gamut, whereas other kind of displays, utilizing more complicated CCFL or LED phosphor formulations or RGB LED backlights, may extend past 100% of the NTSC color gamut, a difference quite perceivable by the human eye.

In 2004, Hydis Technologies Co., Ltd licensed its AFFS patent to Japan"s Hitachi Displays. Hitachi is using AFFS to manufacture high end panels in their product line. In 2006, Hydis also licensed its AFFS to Sanyo Epson Imaging Devices Corporation.

A technology developed by Samsung is Super PLS, which bears similarities to IPS panels, has wider viewing angles, better image quality, increased brightness, and lower production costs. PLS technology debuted in the PC display market with the release of the Samsung S27A850 and S24A850 monitors in September 2011.

TFT dual-transistor pixel or cell technology is a reflective-display technology for use in very-low-power-consumption applications such as electronic shelf labels (ESL), digital watches, or metering. DTP involves adding a secondary transistor gate in the single TFT cell to maintain the display of a pixel during a period of 1s without loss of image or without degrading the TFT transistors over time. By slowing the refresh rate of the standard frequency from 60 Hz to 1 Hz, DTP claims to increase the power efficiency by multiple orders of magnitude.

Due to the very high cost of building TFT factories, there are few major OEM panel vendors for large display panels. The glass panel suppliers are as follows:

External consumer display devices like a TFT LCD feature one or more analog VGA, DVI, HDMI, or DisplayPort interface, with many featuring a selection of these interfaces. Inside external display devices there is a controller board that will convert the video signal using color mapping and image scaling usually employing the discrete cosine transform (DCT) in order to convert any video source like CVBS, VGA, DVI, HDMI, etc. into digital RGB at the native resolution of the display panel. In a laptop the graphics chip will directly produce a signal suitable for connection to the built-in TFT display. A control mechanism for the backlight is usually included on the same controller board.

The low level interface of STN, DSTN, or TFT display panels use either single ended TTL 5 V signal for older displays or TTL 3.3 V for slightly newer displays that transmits the pixel clock, horizontal sync, vertical sync, digital red, digital green, digital blue in parallel. Some models (for example the AT070TN92) also feature input/display enable, horizontal scan direction and vertical scan direction signals.

New and large (>15") TFT displays often use LVDS signaling that transmits the same contents as the parallel interface (Hsync, Vsync, RGB) but will put control and RGB bits into a number of serial transmission lines synchronized to a clock whose rate is equal to the pixel rate. LVDS transmits seven bits per clock per data line, with six bits being data and one bit used to signal if the other six bits need to be inverted in order to maintain DC balance. Low-cost TFT displays often have three data lines and therefore only directly support 18 bits per pixel. Upscale displays have four or five data lines to support 24 bits per pixel (truecolor) or 30 bits per pixel respectively. Panel manufacturers are slowly replacing LVDS with Internal DisplayPort and Embedded DisplayPort, which allow sixfold reduction of the number of differential pairs.

The bare display panel will only accept a digital video signal at the resolution determined by the panel pixel matrix designed at manufacture. Some screen panels will ignore the LSB bits of the color information to present a consistent interface (8 bit -> 6 bit/color x3).

With analogue signals like VGA, the display controller also needs to perform a high speed analog to digital conversion. With digital input signals like DVI or HDMI some simple reordering of the bits is needed before feeding it to the rescaler if the input resolution doesn"t match the display panel resolution.

Kawamoto, H. (2012). "The Inventors of TFT Active-Matrix LCD Receive the 2011 IEEE Nishizawa Medal". Journal of Display Technology. 8 (1): 3–4. Bibcode:2012JDisT...8....3K. doi:10.1109/JDT.2011.2177740. ISSN 1551-319X.

Brody, T. Peter; Asars, J. A.; Dixon, G. D. (November 1973). "A 6 × 6 inch 20 lines-per-inch liquid-crystal display panel". 20 (11): 995–1001. Bibcode:1973ITED...20..995B. doi:10.1109/T-ED.1973.17780. ISSN 0018-9383.

K. H. Lee; H. Y. Kim; K. H. Park; S. J. Jang; I. C. Park & J. Y. Lee (June 2006). "A Novel Outdoor Readability of Portable TFT-LCD with AFFS Technology". SID Symposium Digest of Technical Papers. AIP. 37 (1): 1079–82. doi:10.1889/1.2433159. S2CID 129569963.

Kim, Sae-Bom; Kim, Woong-Ki; Chounlamany, Vanseng; Seo, Jaehwan; Yoo, Jisu; Jo, Hun-Je; Jung, Jinho (15 August 2012). "Identification of multi-level toxicity of liquid crystal display wastewater toward Daphnia magna and Moina macrocopa". Journal of Hazardous Materials. Seoul, Korea; Laos, Lao. 227–228: 327–333. doi:10.1016/j.jhazmat.2012.05.059. PMID 22677053.

Small and exquisite, this 0.96” TFT screen employs an edge-to-edge design and offers glorious 160×80HD 16-bit color display, which can be suitable for wearable projects, mobile devices and smart home products.

Compatible with 3.3V to 5V, the display consumes current less than 15mA in full-screen. It works well with controllers like Arduino UNO, Leonardo, ESP32, ESP8266, FireBeetle M0, etc

Trait Tracker: Track the origin and class bonuses that your champions qualify for. Displays up to 10 origin and class. On other player arena, it shows that player trait bonuses instead.

Each game of TFT in Set 2 will have an element assigned, spawing elemental hexes of that element during the planning phase. The hexes will spawn in the same places for all players on every round; the first appears at Stage 1-1, and the second one appears at Stage 3–1.

5) Insert the TF card into the Raspberry Pi, power on the Raspberry Pi, and wait for more than 10 seconds to display normally. But the touch is abnormal at that time, and the touch needs to be calibrated as the following steps.

You can perform touch calibration by clicking the Raspberry Pi icon on the taskbar, selecting Preferences -> Calibrate Touchscreen, and following the displayed prompts.

4. After calibration, the following data will be displayed. If you want to save these touch values, you can replace the data in the red circle with the data in the corresponding position in 99-calibration.conf.

Our new line of 10.1” TFT displays with IPS technology are now available! These 10.1” IPS displays offer three interface options to choose from including RGB, LVDS, and HDMI interface, each with two touchscreen options as capacitive or without a touchscreen.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.

The line max_usb_current=1 increases the maximum USB output current of the Pi. This way, your Pi will provide enough power to your display. Make sure that the main power supply is powerful enough for all your devices.

The max_usb_current=1 line increases the Pi"s maximum USB output current if your display is USB powered. Use hdmi_max_current=1 if the display is powered by HDMI. This way, your Pi will provide enough power to your display. Make sure the main power supply is powerful enough for all your devices (5V-3A). For a larger screen (10" and more), make sure you use an external power supply.

Nextion is a Human Machine Interface （HMI） solution combining an onboard processor and memory touch display with Nextion Editor software for HMI GUI project development.

Using the Nextion Editor software, you can quickly develop the HMI GUI by drag-and-drop components (graphics, text, button, slider, etc.) and ASCII text-based instructions for coding how components interact on the display side.

Nextion HMI display connects to peripheral MCU via TTL Serial (5V, TX, RX, GND) to provide event notifications that peripheral MCU can act on, the peripheral MCU can easily update progress, and status back to Nextion display utilizing simple ASCII text-based instructions.

Our company specializes in developing solutions that arerenowned across the globe and meet expectations of the most demanding customers. Orient Display can boast incredibly fast order processing - usually it takes us only 4-5 weeks to produce LCD panels and we do our best to deliver your custom display modules, touch screens or TFT and IPS LCD displays within 5-8 weeks. Thanks to being in the business for such a noteworthy period of time, experts working at our display store have gained valuable experience in the automotive, appliances, industrial, marine, medical and consumer electronics industries. We’ve been able to create top-notch, specialized factories that allow us to manufacture quality custom display solutions at attractive prices. Our products comply with standards such as ISO 9001, ISO 14001, QC 080000, ISO/TS 16949 and PPM Process Control. All of this makes us the finest display manufacturer in the market.

Without a shadow of a doubt, Orient Display stands out from other custom display manufacturers. Why? Because we employ 3600 specialists, includingmore than 720 engineers that constantly research available solutions in order to refine strategies that allow us to keep up with the latest technologiesand manufacture the finest displays showing our innovative and creative approach. We continuously strive to improve our skills and stay up to date with the changing world of displays so that we can provide our customers with supreme, cutting-edge solutions that make their lives easier and more enjoyable.

Customer service is another element we are particularly proud of. To facilitate the pre-production and product development process, thousands of standard solutions are stored in our warehouses. This ensures efficient order realization which is a recipe to win the hearts of customers who chose Orient Display. We always go to great lengths to respond to any inquiries and questions in less than 24 hours which proves that we treat buyers with due respect.

Choosing services offered by Orient Display equals a fair, side-by-side cooperation between the customer and our specialists. In each and every project, we strive to develop the most appropriate concepts and prototypes that allow us to seamlessly deliver satisfactory end-products. Forget about irritating employee turnover - with us, you will always work with a prepared expert informed about your needs.

In a nutshell, Orient Display means 18% of global market share for automotive touch screen displays, emphasis on innovation, flexibility and customer satisfaction.Don"t wait and see for yourself that the game is worth the candle!

Used TFT clocks DIM from S/V60, XC60, S80II, XC/V70III made in the years 2014 to 2017 (the unit from V40 series can only be used in V40 cars - it has different mechanical shape than x60, x70, x80)

make sure that you located the TFT DIM that matches the transmission type of the target car - Automatic (PRND display) or Manual (+ Gear -) on the right side of the display. Diesel/petrol fuel type of the donor car does NOT matter.

Then press DECODE CEM. We must warn you this process can take up to 24 hours(but on average it usually does not take more than 12 hours). During the whole process you can interrupt the decoding process and continue later. If you do the CEM PIN decoding then you no longer need to do it again. Thanks to this you can also make other changes in the vehicle configuration including the TFT retrofit. After this process is done you will receive an email to the account you put in in the beginning.

Then choose CAR CONFIGURATION and then “Car configuration wizard”. Then you only need to choose the “TFT retrofit” wizard. Make sure DIM is connected.

Connect DiCE again, turn the ignition key to position II and open VDASH again on your computer. Go to “Car configuration wizard” and choose TFT retrofit again.

VDASH will begin to look for the newly connected TFT DIM. If all wires are correctly plugged in, the update process will begin. If not then check the connecting of the wires again using the multimeter.

Your vehicle will restart itself many times during the process and at the end you will see a picture of the vehicle, the state of fuel and more. At the very beginning the incorrect measures can be displayed, but after a short trial run it should be fixed. The kilometres will also automatically reappear.

You can change and move the clock motivesonly when the engine is running (this does not have any specific explanation). The designated motive is Elegance(grey or brown). It is possible to reprogramme this motive to a blue version “R-design” (using car configuration > advanced settings > Advanced TFT DIM settings > Screen Skins > DIM: R-design menu), motives Ecoand Powerremain unchanged.

1. Temporarily disconnect newly connected cables from the white DIM connector, and connect the original DIM2. Start the engine (SCL the steering lock will now unlock)3. While the engine is running, disconnect the original DIM connector and reconnect the additional wiring, connect the TFT DIM4. Turn the engine off and lock the car5. SCL will NOT turn on again (unless you connect the original DIM). You will not observe any further immobilisation issues.

ST cooperates with Riverdi because we believe that such partnership brings value to our joint customers. On top of this, we also discovered that we shared some business visions about how to make it easier and faster to go from the initial stages of designing a product embedding a graphical user interface to a production ready product. The conclusion was that combining the STM32 High performance microcontrollers, with the free STM32 graphics toolchain and Riverdi displays + PCB and then merge all of this into a board support package ready to run TouchGFX, would be a compelling offering.

Designing and developing a product with an embedded user interface (GUI), can be complex, as it involves many building block and disciplines, which all requires expert knowledge. Riverdi offer is covering a lot of them, allowing the customer to focus on the most important part of the development, the GUI Application itself. And remember that this is the face of your product. Choosing such solution, the customer does not need to worry about sourcing components like the display, microcontrollers, memory, etc. or even writing low-level drivers, development the board support package or porting TouchGFX. Its all ready done. What makes cooperation with Riverdi unique is that Riverdi has been able to drive a 1280*800 display resolution in high colors, with a STM32H7 microcontroller and a TouchGFX application showing a smart home UI. This shows that Riverdi is well aware of how to exploit all the capabilities of the STM32 Graphics offering combining hardware and software in a unique solution. From the first business meetings, it was clear that we shared visions of the market for embedded GUIs. And Riverdi proved that they can go from an idea and concept to actual working hardware, very fast.

New Eagle offers a wide variety of displays that can meet the needs of practically any automotive, hydraulic, marine or engine application. Whether your application demands a touchscreen display with custom graphics and data logging capability or you simply need to monitor generic engine parameters, New Eagle can provide a cost-effective display solution for your project. If your project does require a custom display, New Eagle can quickly develop custom software in-house or alternatively equip you with everything you need to begin developing custom display software yourself.

Most applications for displays require custom graphics, menus and/or control capability. Writing custom display software in traditional programming languages like C, C++ or Java can amount to thousands of lines of code. Creating and debugging code in this manner can be time consuming, tedious and labor intensive.

New Eagle’s line of Raptor-compatible displays and complimentary Raptor-Dev software offer an alternative approach to the traditional programming languages: These displays allow developers to leverage the graphical programming environment of MATLAB Simulink to quickly and easily create, edit and debug display software. But what exactly is Raptor-Dev software and how does it allow developers to create software in Simulink for displays?

Raptor-Dev is a library of customizable Simulink blocks that allows developers to quickly create custom display software for Raptor-compatible displays. Developers work directly in the Simulink environment with Raptor-Dev blocks as well as native Simulink blocks and features. The Raptor-Dev library blocks include drawing functions (draw text, shapes or display images), menu/button interaction definitions, pre-built gauges and lots of other powerful tools that make display development easy and intuitive. Once a display application is ready for programming, code can be directly compiled from Simulink into an application file which can then be loaded onto the Raptor-compatible display via a USB stick.

Raptor displays can be programmed not only to display information but also to act as stand-alone controllers for even complex electro-mechanical systems. This is possible because Raptor display programmers can leverage all of the native Simulink blocks and features to create any control logic necessary for their application. All Raptor displays are capable of interfacing with any CAN-based actuators or sensors. And the Raptor VeeCAN 800 and VeeCAN 320 in particular have a number of analog and frequency inputs and digital outputs, which make these displays ideal all-in-one display/controller solutions for a wide variety of applications.

The VeeCAN 800 is a 7" fully waterproof resistive touchscreen display. It features a WVGA 800 x 480 TFT LCD color display and two USB ports (one rear and one front accessible). The VeeCAN 800 also supports 14 analog inputs, four digital inputs, eight outputs, two CAN connections, as well as an Ethernet connection.

The Raptor VeeCAN 700 is a 7-inch color display wrapped in a rugged, environmentally-sealed enclosure. The Raptor VeeCAN 700 has two CAN channels for monitoring, data logging or transmitting commands from the display over the CAN bus. In relatively simple applications with only CAN-based sensors and actuators, the Raptor VeeCAN 700 can even act as a low-cost, all-in-one display/controller solution.

The Raptor VeeCAN 500 is a 5-inch color display wrapped in a rugged, environmentally-sealed enclosure. The Raptor VeeCAN 500 has two CAN channels for monitoring, data logging or transmitting commands from the display over the CAN bus. In relatively simple applications with only CAN-based sensors and actuators, the Raptor VeeCAN 500 can even act as a low-cost, all-in-one display/controller solution.

The VeeCAN 300R is a 3" round capacitive touchscreen display. It features a WVGA 432 x 432 LCD color display, and one USB port on the rear. The VeeCAN 300R also supports seven analog inputs, four digital inputs, one relay output, one CAN connection, as well as one RS-485 connection.

The VeeCAN 320 display houses a 3.5" color display with seven analog inputs, three digital inputs, four outputs, two CAN connections and one USB 2.0. Perfect for use with data logging, diagnostics and a control module.

The VeeCAN 320 J1708 display houses a 3.5" color display with seven analog inputs, three digital inputs, four outputs, two CAN connections and one USB 2.0. Perfect for use with data logging, diagnostics and a control module. This version is J1708 compatible.

The VeeCAN 128 is a rugged display wielding a 2.3" monochrome display suitable for any environment. The VeeCAN 128 comes standard with four warning LEDs, four tactile buttons, a 6-pin connector, CAN 2.0B and one USB 2.0.

All of our standard displays (i.e. non-raptor) are available with pre-installed Generic Engine Monitoring (GEM) software. The GEM software allows the user to connect the display directly to a J1939 CANbus and monitor many different engine and vehicle parameters. A series of easy-to-use menu screens allows these displays to be configured to suit the individual application. Typical options include language and unit options and various screen layouts to show parameter icons, bar-graphs and alphanumeric text. If you are using a Generic Engine Monitoring display in your application, purchase of an SDK is not necessary.

The VeeCAN 800 is a 7" fully waterproof resistive touchscreen display. It features a WVGA 800 x 480 TFT LCD color display and two USB ports (one rear and one front accessible). The VeeCAN 800 also supports 14 analog inputs, four digital inputs, eight outputs, two CAN connections, as well as an Ethernet connection.

The VeeCAN 700 is a 7" IP67 waterproof PCAP touchscreen display. It features a WVGA 800 x 480 TFT LCD color display and two USB ports. The VeeCAN 700 also supports one analog input, one digital input, one output, two CAN connections, as well as an Ethernet connection.

The VeeCAN 500 is a 5" IP67 waterproof PCAP touchscreen display. It features a WVGA 800 x 480 TFT LCD color display and two USB ports. The VeeCAN 500 also supports one analog input, one digital input, one output, two CAN connections, as well as an Ethernet connection.

The VeeCAN 300R is a 3" round IP67 waterproof PCAP touchscreen display. It features a WVGA 432 x 432 TFT LCD color display and one USB port. The VeeCAN 300R also supports six analog inputs, four digital inputs, one frequency output, and one CAN connection.

The VeeCAN 320 display houses a 3.5" color display with seven analog inputs, three digital inputs, four outputs, two CAN channels and one USB 2.0. Perfect for use with data logging, diagnostics and a control module.

The VeeCAN 320 J1708 display houses a 3.5" color display with seven analog inputs, three digital inputs, four outputs, two CAN channels, one J1708 Serial and one USB 2.0. Perfect for use with data logging, diagnostics and a control module.

The VeeCAN 320 Low Profile display features a stylish and sleek profile bezel. The display acts as a reader and/or data logger for monitoring your engine"s key parameters. It is the next generation of compact, highly flexible, rugged CAN bus displays. Electrically and environmentally rugged, the VeeCAN 320 Low Profile is ready to meet the challenges of providing tough, flexible instrumentation for harsh environments.

The VeeCAN 320 Low Profile LITE display features a stylish and sleek profile bezel. The display acts as a reader and/or data logger for monitoring your engine"s key parameters. It is the next generation of compact, highly flexible, rugged CAN bus displays. Electrically and environmentally rugged, the VeeCAN 320 LPL is ready to meet the challenges of providing tough, flexible instrumentation for harsh environments.

The VeeCAN 128 is a rugged display wielding a 2.3" monochrome display suitable for any environment. The VeeCAN 128 comes standard with four warning LEDs, four tactile buttons, a 6-pin connector, CAN 2.0B and one USB 2.0. The product comes with a J1939 engine monitor standard or is C programmable.

The KAntrak 1700 is a rugged 3" x 3" device containing a compact LCD display, perfect for harsh condition testing and diagnostics. It comes with GEM (Generic Engine Monitor) installed as standard.

The NMEA2000 Universal Engine Gateway Monitor (EGM) converts analog and J1939 CAN messages to NMEA 2000. This is a useful device for upgrading boats with older engines to the newer NMEA instrumentation options. It is a useful tool used for converting and displaying all types of engine information. This comes fully stocked with a day and night mode, waterproof casing, and a full 320 x 240 color display.

The VeeCAN 320 CAN Slave display in conjunction with a custom MotoHawk library allows developers to easily send data from a MotoHawk ECU to a pre-programmed display without having to create a custom display application using the C SDK. This product can also be made to work with a Raptor ECU and library. Please contact

This rugged display unit is capable of operating in harsh marine and off-highway applications. Designed to operate as a CAN slave, the display is driven by receiving CAN signals. The CAN library is available upon request and custom programming can be provided upon request. Custom bezels may also be ordered.

The VeeCAN 128 is a rugged display wielding a 2.3" monochrome display suitable for any environment. The VeeCAN 128 comes standard with four warning LEDs, four tactile buttons, a 6-pin connector, CAN 2.0B and one USB 2.0. The "Miniview" application refers to a CAN slave display. The unit receives CAN messages and displays attributes on the screen. With MotoHawk, there is a block set to make CAN messages easy. This block set can be configured also for Raptor.

New Eagle offers a custom display application using Android software. Using our Electric Vehicle Android App as the groundwork of the display, features can be changed and added to meet the requirements of your next project. Primarily connecting over Bluetooth, this application can be integrated to most systems with ease.

New Eagle is proud to offer a variety of VeeThree"s J1939 Direct Connect Serial Gauges. These gauges connect directly to the CAN bus and require no additional devices to drive them. The 2" gauges are powered by a smooth stepper motor for 270° of operation. All displays have LED backlighting for excellent night visibility and are SAE J1939 compliant. These displays are sealed to IP67 immersion standards and feature an anti-fog coating on the inside of the lens to minimize fogging.

The KAntrak 2700/CANtrak 7200 is a rugged 4" x 4" monochrome display with the potential to be used for data logging, diagnostics or control capabilities.

The KAntrak 2710/CANtrak 7210 is a rugged 4" x 4" monochrome display with the potential to be used for data logging, diagnostics or control capabilities. This version contains a built-in heater for extreme low-temperature operation.

The KAntrak 2710 CSA is a rugged 4" x 4" monochrome display with the potential to be used for data logging, diagnostics or control capabilities. This version contains a built-in heater for extreme low-temperature operation and CSA certification.