sharp microwave lcd display repair manufacturer

All fields are required. By clicking subscribe you are agreeing to receiving email communication from Sharp Electronics regarding Sharp consumer products.

In my previous job (just been made redundant), one of the products I repaired were microwaves, and I did have to change the displays occasionally. Some of them were easy, as they were plug in, the others had to be wired to the control board which always meant replacing the two.

We did sell them by the bucket load, and the numbers we saw to repair were not excessive. I can"t give you any statistics unfortunately. We did not experience any problems in getting spares.

Fixing your broken microwave at home can save you money and a trip to your local repair shop. One of the most common problems is a broken microwave LCD display. The LCD display is a very useful component of the microwave because it displays the current status and remaining time when heating up food. However, if the LCD needs to be replaced, it may be more economical to buy a brand new microwave than to buy the broken part.

Check both the temperature and monitor fuse to make sure it is not blown. Fuses are located in different spots in each microwave brand. Check your owner"s manual for information on how to locate the fuses. Take it out and check the thin wire inside the fuse. You can tell that a fuse is blown if it is discoloured.

Check the circuit board for a display that is only missing digits or lines. The problem is caused by a missing solder in the microwave"s circuit board or a faulty capacitor. Look at the circuit inside the microwave and locate the broken line.

Are you looking for Sharp Commercial Microwave parts? Then you are in right place. We have all the major Microwave parts such as magnetrons, switches, and power circuit board. If you are looking for a magnetron, we have it. If it’s a switch, we got it. And if you need any Microwave power supply, we have that too.

QC Electronics is a trusted and reliable supplier with a large selection of Sharp Microwave parts available online. Our team is dedicated to providing the best customer service possible. Whether you are a commercial microwave owner or a consumer, QC Electronics helps you find the right part for your unit.

Here’s a zoomed in image of the control board (supplier example only) for your model microwave oven where I’ve highlighted the electrolytic capacitors.

Without a schematic for the board (I couldn’t find one online) I cannot tell you which is the exact one associated with the display but look for any that seem blown or leaking. Blown means domed end caps.

The HV capacitor in a microwave, can store >5000V DC for months even if the power to the oven has been disconnected for this length of time. This amount of voltage can seriously injure you. You need to correctly discharge the HV capacitor as soon as possible after removing the cover from the oven and before commencing any other work in the oven. If you don’t know what you’re doing then don’t do it!

I"m not sure what you mean by "OTR Style". My microwave is mounted above the oven. It has a light and an exhaust fan. The unit is at another location (not my home) so I can"t provide a photo immediately.

I found a video that shows how to remove the display. Assuming I can do it successfully, what info do I need to provide you to get a replacement part(s)? As I said, the microwave works fine except nothing at all appears in the display.

The microwave display is an important part of the appliance. The display is used to confirm that your button-press commands have entered. It counts down the time, displays power level, and shows you which preset you’ve selected. In many households, it’s also the primary visible clock. There are few things more annoying than when your microwave display suddenly stops working. Maybe it’s completely blank, or showing you a row of half-zeros, or the display is so garbled that you have to decrypt it to read your popcorn countdown. Whatever the problem, we’re here to offer a quick guide for what you can do when your microwave display stops working.

The first step for any appliance troubleshooting is to check the power cable and power supply. If the screen has gone completely blank and the buttons don’t beep anymore, there’s a chance that your microwave is just unplugged or is powered by a tripped breaker.

There’s a chance that the power was cut off to your outlet, not a problem with the plug. Check your breaker box. If one breaker is at the center or pointing the wrong direction, flip it “off” then back to “on” to reset it. Then check your microwave.One last check is to plug your microwave into another outlet. Just in case that does the trick.

If it’s not a power problem, then the issue really is inside your microwave display and control panel. To access this, you’re going to need to remove the control panel and take a peek “under the hood” to see if you can spot any problems that could be easily fixed.

Unplug your microwave from the wall so there’s no risk of getting a shock when you access the wires behind the panel. Keep in mind that the capacitor inside the microwave can still store voltage for a long period of time even after unplugging the unit. It may require a manual discharge, which you should not attempt without training and prior experience. Look for mounting screws along the top front of your microwave, which covers the front vent. Remove the screws then open the door and pull the vent free. With the door open, you’ll see additional mounting screws securing the panel to the microwave cabinet.

Remove those screws, then carefully pry the panel open, pressing any clips along the edges. There will be wires connecting the panel and the microwave. Secure these wires firmly and/or disconnect and reconnect each wire harness. If there’s a loose wire, it can be repaired with this method.

When all the wires are secure, close the panel back up and press until the clips click. Then return the mounting screws, the vent cover, and the vent cover’s mounting screws. Plug the microwave back in and give the panel a try. There’s a chance you just fixed your problem.

If nothing else has worked, your next option is to consider replacing the control panel. In most cases, you’re better off trying to replace the entire panel assembly than trying to pinpoint exactly which small electric component went wrong and how to fix it. If you do choose to replace the panel, you will need to look up specific information on this repair based on the brand and model of your microwave. Whether your microwave is mounted above the stove may also make a difference. This will determine where your mounting screws and clips are located and the exact steps to exchange one control panel for a replacement. You will, of course, also need to order an exact replacement for your microwave model.

Please remember to unplug the microwave before performing this repair. If you are uncomfortable taking apart your microwave or working with appliance wiring, there’s another option.

A professional appliance repair technician will be able to replace the control panel of your microwave with ease. They will also have a number of additional troubleshooting tricks up their sleeve to help you hunt down the exact problem with your microwave. Whether you don’t have time for microwave drama or you would rather a professional take a screwdriver to your appliances, calling for appliance repairs is often the smartest way to solve a broken home appliance.

Your final option, one that many people choose, is to simply buy a new microwave. This might sound like strange advice coming from a team of repair technicians, but some appliances were not built with the intention of regular repairs or part replacements. Most microwaves today are very affordably priced, a price that includes the bulk-discount of parts and assembly.

The individual replacement pieces and time to do the repairs will often cost you more than simply buying a new microwave of the exact same make and model, or even something newer and nicer. As repair technicians, we can tell you that repairing a washing machine, dryer, dishwasher, or water heater are common because the appliance is much more valuable than its individual parts.

But a microwave? If that control panel is giving you too much trouble and is not a quick fix, consider buying a new one. We’d be happy to help you keep it in great condition so this problem doesn’t happen prematurely with your next model. We are always proud to help local homeowners and business owners keep their appliances in check. Whether you’re calling for maintenance and servicing, emergency repairs, or need an essential part of your appliances replaced, we’re here to help. Contact us today to schedule your repairs, consult on an appliance-related problem, or build a maintenance schedule for the appliances on your property. We look forward to hearing from you.

The control panel does not have individual light bulbs that can be changed. If the display is not working or partially working after following the steps above, service is needed.

If these troubleshooting steps do not resolve the issue, service is necessary to expertly diagnose and repair the product. Contact Factory Certified Service to schedule an appointment for repair.

The Sharp microwaves come with advanced features that make the cooking simpler and easier. Extenda Vent System, one-touch settings, etc are distinct features that make Sharp microwaves stand out. Sharp deals in both countertops and built-in microwave ovens in different capacities. You can explore the range and buy the best model for your kitchen to cook your favourite dishes.

Sulekha is a leading online business directory. Here, we help our users find the verified and dependable experts providing Sharp microwave oven repair services in Chennai. If you are looking for a reputed Sharp microwave oven service expert, fill the form above with your specifications. The technicians catering to your needs would contact you. You can talk to the expert regarding the service you require and get the service quote as well.

The reasons why Sulekha is the right platform for booking an Sharp microwave oven serviceTimely Service: The breakdown of the microwave can break the cooking routine. All our experts understand this and provide them timely service. The users can book the earliest slot from the available service slots.

Annual maintenance service ensures the users about the proper functioning of the appliance. The frequency of service calls may vary according to the tenure of the contract. Before you hire the Sharp microwave oven annual maintenance service to ensure that you discuss what does this service includes. Do not forget to ask the cost of which spare parts would be covered in this service and the ones that would be replaced with additional charges.

The excessive and improper use of any appliance can lead to decreased efficiency and sometimes failure as well. The breakdown of your microwave can influence other tasks. Repairing microwave on your own without knowledge can result in further damage. Therefore, taking the help of an experienced and knowledgeable technician is a wise choice.

You can book an Sharp microwave oven repair service and handover the task to an expert. This would help you save money and time. Here are the common issues for which you can hire repair service for your Sharp microwave ovenMicrowave not heating