arduino 3.2 tft lcd shield supplier

Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (3.2" diagonal) bright (5 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. As a bonus, this display has a optional resistive touch panel with controller XPT2046 attached by default and a optional capacitive touch panel with controller FT6206 attached by default, so you can detect finger presses anywhere on the screen and doesn"t require pressing down on the screen with a stylus and has nice glossy glass cover.

The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you"ll have it running in under 10 minutes! Works best with any classic Arduino (UNO/Due/Mega 2560).

This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. You can connect more sensors, buttons and LEDs.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" - we"ve written a full open source graphics library at the bottom of this page that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x,y and z (pressure) and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!

If you"ve had a lot of Arduino DUEs go through your hands (or if you are just unlucky), chances are you’ve come across at least one that does not start-up properly.The symptom is simple: you power up the Arduino but it doesn’t appear to “boot”. Your code simply doesn"t start running.You might have noticed that resetting the board (by pressing the reset button) causes the board to start-up normally.The fix is simple,here is the solution.

In electronics world today, Arduino is an open-source hardware and software company, project and user community that designs and manufactures single-board microcontrollers and microcontroller kits for building digital devices. Arduino board designs use a variety of microprocessors and controllers. The boards are equipped with sets of digital and analog input/output (I/O) pins that may be interfaced to various expansion boards (‘shields’) or breadboards (for prototyping) and other circuits.

The boards feature serial communications interfaces, including Universal Serial Bus (USB) on some models, which are also used for loading programs. The microcontrollers can be programmed using the C and C++ programming languages, using a standard API which is also known as the “Arduino language”. In addition to using traditional compiler toolchains, the Arduino project provides an integrated development environment (IDE) and a command line tool developed in Go. It aims to provide a low-cost and easy way for hobbyist and professionals to create devices that interact with their environment using sensors and actuators. Common examples of such devices intended for beginner hobbyists include simple robots, thermostats and motion detectors.

In order to follow the market tread, Orient Display engineers have developed several Arduino TFT LCD displays and Arduino OLED displays which are favored by hobbyists and professionals.

The sizes are 0.96” (160×80), 1.13” (240×135), 1.3” ((240×240), 1.33” (128×128), 1.54” (240×240), 1.77” (128×160), 2.0” (240×320), 2.3” (320×240), 2.4” (240×320), 2.8” (240×320), 3.2” (240×320).

Although Orient Display provides many standard small size OLED, TN and IPS Arduino TFT displays, custom made solutions are provided with larger size displays or even with capacitive touch panel.

I puzzled some hours with exactly the same hardware setup and made a quick & dirty, but successfully test script, combining LCD, Touch and SD Card Features.

662 arduino tft lcd products are offered for sale by suppliers on Alibaba.com, of which lcd modules accounts for 65%, lcd touch screen accounts for 14%.

Begin by carefully starting the rear connector of the TFT shield onto the Arduino Mega. Go slowly and ensure that all pins are inserted correctly and are straight.

In order to use 3.2″ TFT lcd  Shield , We must have the libraries. So you can download  (UTFT Library) and (URTouch Library) install the library by extracting that zipped file in the library folder as shown below.

We know that we could find many examples for Arduino and TFT LCD to work together, Arduino UNO with 2.8"/3.2" TFT screen, or Arduino Mega with 2.8"/5.0" TFT screen. They are all working very well. However, if you play with it, you may find they are rather blunt, not swift enough to show a picture quickly. In fact, we"ve made some TFT shields for Arduino Uno/Mega ever. But we feel they are all not good enough.

Why ? You know, Arduino UNO/Mega works on 8-bit ATMega328/1280/2560. Those chips are not powerful enough for TFT screen. While Arduino Due comes, we feel that: oh, it is the time !

Arduino Due is based on 32-bit ARM processor, and it is much more powerful than Arduino UNO/Mega. So if you play Arduino DUE and TFT, you feel everything abviously runs faster than Arduino Mega. You could display a picture shortly.

Our shield is designed for Arduino DUE. It is not compatible with Arduino Mega/Mega2560. Please DO NOT insert it to Arduino Mega/Mega2560. Otherwise the TFT Screen might be damaged.

Our TFT shield doesn"t cover all the female pins like most of other TFT shield. We know that sometimes we need other modules connected with Arduino at the same time. To make things easier, our designing also leaves space for a Sensor Shield. Users don"t need to spend much time on wiring.

Arduino 3.2"" TFT Touch Shield is an Arduino Mega compatible multicolored TFT display with a touch-screen and SD card socket. It is available in an Arduino MEGA shield compatible pinout for attachment. The TFT driver is based on SSD1289 with 16bit data and 4bit control interface.

Arduino 3.2" TFT LCD Touch shield is an Arduino Mega compatible multicolored TFT display with touch-screen and SD card socket. It is available in an Arduino MEGA shield compatible pinout for attachment. The TFT driver is based on SSD1289 with 8bit data and 4bit control interface.

{"id":1860100849722,"title":"3.2\" inch TFT LCD 5V Expansion Shield Touch Screen with Touch Pen for Arduino","handle":"3-2-inch-tft-lcd-5v-expansion-shield-touch-screen-with-touch-pen-for-arduino","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a 3.2 inch TFT touch screen expansion board using standard Arduino Shield interface and it has good compatibility.\u003c\/li\u003e\n\u003cli\u003eIt integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy.\u003c\/li\u003e\n\u003cli\u003eWith GPRS module, you can design your Arduino phone.\u003c\/li\u003e\n\u003cli\u003eWith NFC reader module, you can create access control systems with the photos show.\u003c\/li\u003e\n\u003cli\u003eWith voltage and current sensor, you can make oscilloscope.\u003c\/li\u003e\n\u003cli\u003eCan use it directly to display characters, graphics and BMP format images. And touch controlling is available;\u003c\/li\u003e\n\u003cli\u003eCompatibility: As the SD card is connected to SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560 \/ Arduino Leonardo\u003c\/li\u003e\n\u003cli\u003eTouch screen type: resistive touchscreen.\u003c\/li\u003e\n\u003cli\u003eTouch Pen: length is 9cm;\u003c\/li\u003e\n\u003cli\u003eResolution: 240X400;\u003c\/li\u003e\n\u003cli\u003eDisplay size: 3.2 inch;\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V;\u003c\/li\u003e\n\u003cli\u003eLogic level: 5V \/ 3.3V;\u003c\/li\u003e\n\u003cli\u003eOn-board 3.3V \/ 300mA regulator circuit;\u003c\/li\u003e\n\u003cli\u003eOperating current: the maximum is 150mA\u003c\/li\u003e\n\u003cli\u003eUse the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 \/ D1 \/ D2 \/ D3 is available, please refer to the product schematics for the details.\u003c\/li\u003e\n\u003cli\u003eOnboard Micro SD slot, support Micro SD \/ TF Card;\u003c\/li\u003e\n\u003cli\u003eOnboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125"C\u003c\/li\u003e\n\u003cli\u003eVery suitable for digital photo frame, oscilloscope, function generator, detection system monitor\u003c\/li\u003e\n\u003cli\u003eSize: 9*5.3cm\/3.54\"*2.09\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Shield\u003cbr\u003e1*Touch pen","published_at":"2018-08-27T17:43:00+08:00","created_at":"2018-08-27T17:44:52+08:00","vendor":"diymore","type":"LCD Display Module","tags":["Arduino","Display","Shield","UNO R3"],"price":1399,"price_min":1399,"price_max":1399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18399800459322,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X30543","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"3.2\" inch TFT LCD 5V Expansion Shield Touch Screen with Touch Pen for Arduino","public_title":null,"options":["Default Title"],"price":1399,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/1_225.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/2_740.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/3_365.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/4_536.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/5_682.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/7_161.jpg?v=1588654828","\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/6_276.jpg?v=1588654828"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/1_225.jpg?v=1588654828","options":["Title"],"media":[{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764879943,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/1_225.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/1_225.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764912711,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/2_740.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/2_740.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764945479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/3_365.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/3_365.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764978247,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/4_536.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/4_536.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678765011015,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/5_682.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/5_682.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678765109319,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/7_161.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/7_161.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678765240391,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/6_276.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/products\/6_276.jpg?v=1588654828","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a 3.2 inch TFT touch screen expansion board using standard Arduino Shield interface and it has good compatibility.\u003c\/li\u003e\n\u003cli\u003eIt integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy.\u003c\/li\u003e\n\u003cli\u003eWith GPRS module, you can design your Arduino phone.\u003c\/li\u003e\n\u003cli\u003eWith NFC reader module, you can create access control systems with the photos show.\u003c\/li\u003e\n\u003cli\u003eWith voltage and current sensor, you can make oscilloscope.\u003c\/li\u003e\n\u003cli\u003eCan use it directly to display characters, graphics and BMP format images. And touch controlling is available;\u003c\/li\u003e\n\u003cli\u003eCompatibility: As the SD card is connected to SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560 \/ Arduino Leonardo\u003c\/li\u003e\n\u003cli\u003eTouch screen type: resistive touchscreen.\u003c\/li\u003e\n\u003cli\u003eTouch Pen: length is 9cm;\u003c\/li\u003e\n\u003cli\u003eResolution: 240X400;\u003c\/li\u003e\n\u003cli\u003eDisplay size: 3.2 inch;\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V;\u003c\/li\u003e\n\u003cli\u003eLogic level: 5V \/ 3.3V;\u003c\/li\u003e\n\u003cli\u003eOn-board 3.3V \/ 300mA regulator circuit;\u003c\/li\u003e\n\u003cli\u003eOperating current: the maximum is 150mA\u003c\/li\u003e\n\u003cli\u003eUse the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 \/ D1 \/ D2 \/ D3 is available, please refer to the product schematics for the details.\u003c\/li\u003e\n\u003cli\u003eOnboard Micro SD slot, support Micro SD \/ TF Card;\u003c\/li\u003e\n\u003cli\u003eOnboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125"C\u003c\/li\u003e\n\u003cli\u003eVery suitable for digital photo frame, oscilloscope, function generator, detection system monitor\u003c\/li\u003e\n\u003cli\u003eSize: 9*5.3cm\/3.54\"*2.09\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Shield\u003cbr\u003e1*Touch pen"}

ITDB02-3.2S V2 display module is a 3.2" TFT LCD with 65K color 320 x 240 resolutions for Arduino microcontroller. The controller of this LCD module is ILI9341. It supports 16bit data interface with control interfaceof four wires. Moreover, this Arduino LCD module contains the touch screen and SD card socket as well.