lcd panel white line at the very bottom in stock

In order to indicate whether the issue is driver related or hardware related, kindly start your in Safe Mode and check to see if the issue still persists or not:

If the issue still persists, most probably the issue is hardware related and the screen needs to be replaced. To double-check it, restart your computer and enter the BIOS, if the screen has the same issue, it means the screen 100% is damaged.

However, if the issue does not exist in Safe Mode and BIOS, it means the issue is driver related and you should uninstall the display driver completely using this free DDU tool:

After that, go to the manufacturer"s official website and download then install the latest or a compatible graphics card driver or you can contact the manufacturer"s support services to provide you with a compatible driver.

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

Harassment is any behavior intended to disturb or upset a person or group of people. Threats include any threat of suicide, violence, or harm to another.

On a modern LCD TV screen, white (or any color) vertical lines appear when the individual “tab bonded” wire connections of the ribbon cable servicing a column of pixels on the LCD display begin to fail. It could also be a loose connection of the ribbon cable between the t-con and display.

Subsequently, question is, why has a line appeared on my TV? When a TV is showing vertical colored lines, a loose wire cable in the TV might be the cause. If you knock on the back of the TV, the vertical colored lines MAY disappear temporarily. This is a sign that a cable is loose or the T-Con board is faulty.

If your flat-screen TV has the dreaded vertical lines, half of the screen has turned darker, the screen is cracked, or the screen is broken, this can be repaired but may cost more than you paid for the complete TV. If your screen is cracked or broken, you can try replacing the Screen, LCD, Plasma, or LED part.

The appearance of static or flickering horizontal lines on a computer screen can be frustrating and inconvenient, but there are many steps you can take to try to fix your problem. This guide will walk you through various checks and fixes you can perform on your computer and its monitor to find out why the lines are appearing and what to do to make them disappear.

Horizontal lines on a computer monitor can be caused by overheating or physical damage to the monitor and connecting cables. Conflicts between the screen and selected screen resolution and refresh rate settings can also cause line problems, as can out-of-date device drivers and operating systems.

Try a different monitor. If possible, try connecting to a different monitor or screen. It can help you determine if the lines are caused by your computer’s screen or the computer itself.

Check your monitor while it’s disconnected. Keep your monitor powered on, unplug it from your computer, and look for any flickering or lines on its screen while it’s disconnected. If you see any kind of distortion, this means that your monitor is damaged.

Close and reopen your laptop. Close your laptop’s screen, wait a few seconds, and reopen it again slowly. Look to see when the lines begin to appear on the screen as you open the laptop. If the lines only occur at a certain angle, the cause is likely damaged wiring.

Check the monitor connection. Ensure all of the cables are securely connected, and watch for any improvements in screen image quality while you’re inspecting the cables. If you notice the image improves or worsens while touching the connecting cable, it may need replacement.

Remove magnets and electronics. If you have other electronics or magnetic devices near your computer, screen, or the connecting cables, move them somewhere else as they may interfere with the connection and cause the lines.

Calibrate your monitor. This process should only take a few minutes and can help optimize your monitor for use with your computer and its environment.

Run a troubleshooter. Open Settings and select System > Troubleshoot > Other trouble-shooters and run the Video Playback and Program Compatibility trouble-shooters. If you get presented with any recommendations for other trouble-shooters, run those too.

Reset your monitor to its factory settings. If you’re using an external monitor or screen, use its built-in settings, not your computer’s settings, to reset it to its factory settings. You can usually access these settings via a physical Settings or Menu button on the computer monitor itself.

If your monitor is displaying a message that reads "no input signal," you may have a defective cable or component. To troubleshoot the issue, turn your computer off and on again. Also, unplug the monitor-to-PC cable and plug it back in, making sure the connection is secure. Try another monitor to see if the problem is with your PC. Also, try resetting your video card; if nothing else works, replace your video card.

To fix coloration and distortion on a computer screen, power the monitor on and off, restart the computer, and make sure the cable between the monitor and computer is connected securely. If you"re using a CRT screen, try degaussing the monitor. You can also try adjusting your video card"s quality settings and experimenting with your monitor"s adjustment buttons.

To fix screen burn on a monitor, also called "ghosting," try turning off your display, ideally for at least 48 hours. Also, try setting your screensaver to an all-white image and letting it run for a few hours. You can also try using the JScreenFix tool, which fixes stuck pixels.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

If you experience that abnormal display problem of your PC (such as broken / blurred / sparkling image etc.), please refer to the following troubleshooting steps.

While you have display problems with main screen, you can check the display is a hardware or software issue by entering the BIOS configuration. Here you can learn more about How to enter the BIOS configuration.

If the display problem is still existing in the BIOS configuration, which means the screen hardware may be defective, and we recommend you visit the ASUS authorized repair center to test your laptop.

Note: Although some vendors of graphics issued the latter version but they might not pass its compatibility test. We suggest that you use the same driver as the one on the ASUS support site.

Please uninstall the present graphics driver first, refer to Appendices: How to uninstall driver. After the uninstallation is completed, please install the latest driver which is published on the ASUS support site, here you can learn more about How to search and download drivers.

If you haven"t updated the graphics driver before dysfunction happens, we suggest that you check if there is any new graphics driver on the ASUS support site.

Note: Some models possess both two graphics (integrated & dedicated graphics, such as Intel & NVIDIA) and can view in Device Manager, please confirm they are updated to the latest version, refer to Appendices: How to check the present version of driver.

Note:Only some notebook models have the component cover so that you are able to install a RAM (Random Access Memory) module in the memory module compartment, the reference as below.

Do you have display problems when you execute some specific programs / applications, such as the games or image processing software which occupies more system sources when it"s running?

Note: Please don’t remove the AC adapter for ASUS laptop TP420IA and UX425IA model. (These models need to plug in the AC adapter to do the Hard reset process.)

Re-install the AC adapter and battery, then power on the computer and check whether the problem is resolved or not. If the problem persists, please continue the next troubleshooting step.

Updating software usually helps the system stability and optimization, so we recommend you check and often update to the latest version in your PC. Here you can learn more about:

If the display problem happens recently, and if you have ever created a restore point or there is an automatic system restore existed, try to restore the computer to a point before the problem began to resolve the problem. Here you can learn more about How to use restore point to restore the system.

If the problem persists after all troubleshooting steps are completed. Please backup your personal files, then reset the PC to back to its original configuration. Here you can learn more about:

Or, replace with shorter cable for monitor. Some cables might have problems with signal weakening, especially the VGA (D-SUB) cables with analog signal. Here you can learn more about How to fix Display problem on External monitors.

The screen color temperature might be a little bit different for each panel even if the manufacturing process is the same, so it’s normal. ASUS makes sure the manufactured products to meet the specification, so please feel free to use it.

In addition, you can use Splendid to adjust the display color of your screen, or purchase the PANTONE Validated products to get a more accurate color correction for your experience.

If you experience that the color or color temperature problems on your screen, you are able to adjust the related settings via Splendid. Here you can learn more about The Splendid feature in MyASUS Customization.

A1: It’s a normal Windows situation. If the color setting is set to the light mode on your system, there is a temporary white blinking display after entering the lock screen or resume from sleep mode. Otherwise, there is a temporary blue blinking display if it is a dark color mode.

Note: If your PC is the AMD platform of graphics, please refer to How to uninstall AMD chipset driver, otherwise, please refer to the following steps.

Type and search [Device Manager] in the Windows search bar①, then click[Open]②. (The left-side search illustration below is in Windows 11, and the right-side is Windows 10.)

Type and search [Device Manager] in the Windows search bar①, then click [Open]②. (The left-side search illustration below is in Windows 11, and the right-side is Windows 10.)

Hi on the bottom left of my note 9 right at edge of screen i have a 2inch white vertical line has anyone any idea of what it could possibly be and if so can it be fixed by me or has it got to go back to samsung please

As awesome as they are, most Apple MacBook models do tend to have some flaw - design or build quality related - and quite often that flaw blows up massively. After endless discussions on online forums, avalanche of tech articles, petitions and lawsuits, the defect is acknowledged by the company. In some cases, they even start a “Quality Program”, under which the affected devices are offered a free service even outside warranty. Some of the major “defects” over the years have been MacBook Pro 15inch Battery Issue, Butterfly keyboard issue, FlexGate: MacBook Pro Display Backlight Issue etc.

What are the symptoms?The MacBook Pro screen starts to develop grey or black horizontal lines from the bottom edge (sometimes the top), typically 1-2 cm “tall”. This band of lines is often flickering/strobing.

Note: Is your MacBook display showing Stage Light Effect - alternatively bright & dim areas along the bottom of the display? Or is it going blank when you open the lid beyond a certain angle? If yes, it is not a T-CON board issue. Although both impact the same MacBook models, that issue is actually entirely different. Read about it here:Flexgate: MacBook Pro display backlight issue - Is it repairable?

Technically, all MacBook Pro models launched after 2016, with an Intel CPU chip inside, would be vulnerable to this issue. These include 13 inch, 15 inch, even 16 inch devices. Model Numbers: A1706, A1707, A1708, A1989, A1990, A2159, A2141. MacBooks with Apple M1 chips are considered safe.

However, in our experience here at Fixxo, the 13 inch MacBook Pro non Touch Bar model 2016-17 (Model A1708) is the most frequently impacted model. There is a technical explanation for this. Read on.

It is believed to be a design flaw from Apple. Poor thermal management leads to the display logic board (T-CON board) getting cooked from overheating.

All MacBook displays have a small logic board of their own. Up until 2015 this board used to be tucked inside the hinge cover at the bottom edge of the display. It was part of the “lid”, removed from the main chassis. 2016 onwards, this board, while still being connected to the display, sits inside the top case or main chassis (read: keyboard panel). It is mounted very close to the heatsink radiator.

Disclaimer: Please be informed that this explanation is offered by independent experts (hat tip to Mr Dan at iFixit). Apple hasn’t verified this theory. For more discussion around it check this and this.

Simple - the 13 inch non Touch Bar model (A1708) has a single internal Fan, while most of the other MacBook Pro models 2016 onwards, have two (don’t ask why!). This leads to insufficient heat management, ergo higher chances of conking off.

Yes, but it is expensive - getting the display replaced. The T-CON board is attached to the display assembly, and there’s no way to replace the board alone. So, display assembly replacement is the only real, sure-shot solution.

“If it is a design flaw, won’t my new display also get damaged?” you ask? Good question. Unfortunately, yes, you do run that risk. But, now, with this new-found knowledge, you can proactively avoid any overheating in your MacBook. Read the What can I do to avoid this? section below. Follow that, and you can almost certainly avoid recurrence.

If your device is still under warranty, you’re in luck! For a free replacement, walk in to an Apple Authorized Service Provider (there are a number of fake AASPs around, careful!). If the warranty has expired, consider bringing it to us at Fixxo, for competitive pricing, top-notch quality, great customer support and quick TATs!

Well, I wish I could say “yes”. Your only hope really is that you have alerted at a very early stage of this “ailment”.Shut down the MacBook. Let it cool overnight. Try using again the next day - if the lines don’t reappear after a couple of hours, voila! Do read the next section for precautions.

If those stubborn lines keep reappearing, well, it is only a matter of time. Display assembly replacement is the only end-game. To delay the inevitable, read the next section.

[Secret Tip: Some users have reported to have successfully squeezed a free out-of-warranty replacement from Apple. Maybe try that if you’re feeling lucky!]

Never use these MacBooks (or any laptops for that matter) on the bed or a pillow. For better airflow and ventilation, keep the MacBook on a table or a hard surface.

Well, what can you say. Apple hasn’t acknowledged there is a design flaw. The good news is that there is a lot of pressure building up online towards this cause [too little, too late?]. If and when Apple does relent, it’ll appear on the Apple Service Programs page. Keep checking!

Until then, to support the campaign, you can sign this petition, provide feedback to Apple, or just visit an AASP and (politely) give them a piece of your mind.

Watching your mobile screen with those white or black vertical/horizontal lines is annoying. In short, it’s tough to use a phone with these lines appearing on the screen. Typically, this issue is associated with the LCD, caused by a faulty hardware component in your device due to some accidental fall or water damage. Phones with such damages can only be fixed at a phone repair center.

If you are itel, TECNO or Infinix phone user and is troubled with vertical and horizontal line issues, make a reservation now without waiting time at the service shop. Carlcare Service will fix your phones easily. If your phone is under warranty, Carlcare can also save you repair costs. Check warranty now>>

However, sometimes the culprit could be an app or software glitch, hindering the functionality of key components like display assembly or motherboard. In that case, you can tackle the situation at home.

Before you head on to the fixes, let’s make your phone data safe. Sometimes, these lines are irreversible, and even the solutions you’re up to try may be followed by some sort of data loss. Therefore, the first thing you should do is make a backup of important files and apps on your device. Some popular ways for data back in Android devices are via:

In case you’re not sure about the process, it’s better to take help from a professional repair center. For Infinix, Itel, and TECNO users, Carlcare Service - being their official service center for these brands- is a recommended place to go.

If there’re white lines on the screen, this solution may prove effective. A battery cycle is when you charge a mobile to 100% and let it drain to 0% again. Usually, the lines will disappear soon as you charge the battery fully.

If the above methods don’t work, it’s time to try this masterstroke. Using your phone in a safe mode will confirm if the lines are because of some faulty app or software.

Check if the lines are gone! If yes (hopefully), then a third-party app is the culprit. Now uninstall the latest downloaded applications until the issue is gone. OR you should try the Solution:4

Suppose the lines are still visible. Then the issue is most likely due to some hardware failure- and the best option for you is to take your device to a reliable repair center.

It won’t be aggregation if you call “Factory Reset” the mother of all solutions. It fixes most of the issues caused by an app or software glitch. The process actually brings your phone back to the factory setting by erasing all the apps and files you’ve downloaded post your phone purchase.

If the horizontal or vertical lines still appear on your phone screen after trying all the above methods, you better take your device to a reliable mobile repair store near you. Most likely, it’s a faulty hardware component that needs to be repaired or replaced. Here, we would suggest you opt for only an authorized service center, as this will ensure flawless repair at a reasonable cost. Besides, if any of the components have to be replaced, they will be genuine and as per your specific requirements.

If this issue arises in your Infinix, Itel, or TECNO phone, Carlcare Service is here to help you! Pay a visit to your nearby Carlcare center. Our highly skilled technicians will fix the issues and saves you much trouble.

As the official service center part, we provide 100% original spare parts and various value-added services for Infinix, Itel, and TECNO users. Now with the online reservation service through Carlcare App, you don’t need to wait while your phone is repaired at our service centers.

The T-CON board is temperature sensitive! When it gets over heated it looses its clocking so the horizontal & vertical raster of the LCD signals gets messed up which is why you see the black & grey lines on either the top or bottom of the screen.

You"ll note the display is better after the system has sat a day or so or if you place the system in a cooler location for a few hours. Sadly, once its become stressed it doesn"t take as much heat to make it fail again. As it breaks down the vertical scan starts to also fail.

Lastly, I have given the MacBook Pro at the service center. They have analysed the laptop but they didn"t give me the exact reason why it is happening. As you have mentioned Cable issue, GPU is failing or LCD is failing. They might have not reproduced the issue.

Due to the fact that the issue is isolated to a single line (even with multiple pixels in height) it"s unlikely it"s the actual signal (e.g. cable or connector pins).

Some issue with the connection would most likely screw up several lines and/or the whole image and it won"t be isolated to exactly one line (especially with digital connections).

In a similar way, issues with the graphics card should most likely cause issues with the whole screen (like garbage/random patterns). Those shouldn"t be isolated to a single line.

Turn off the monitor, disconnect all cables, and put it flat on your table (screen up) so it"s sitting plane on the table. Let it sit there for a night, then try again.

If everything else fails, what happens if you use your finger nail and pull it over the faulty line? Don"t push too hard, just so there"s some pressure (typically shows some short colored trail that should disappear within 1-2 seconds). Can you see any additional patterns or "waves" that don"t fit to what you see in other areas of the screen?

How you can fix a white lines which appear on your laptop screen. To understand that you need to read this whole blog till the end without skipping any part. At the end of this blog you will get the answer to your question of why these white lines appear and what caused them and how to get rid of this white line. So let"s get started;

The appearance of horizontal white lines is one of the most basic problems for users of laptops and computers. There may be several reasons behind the occurrence of this problem. For example, the outdated old version of the video card drivers, the bad connection of the video cable, broken ribbon cables, or a problem in your system software.

As we know there are a lot of reasons why there are horizontal or vertical lines on the computer screen display in Windows 10. To solve the horizontal or vertical lines across your desktop or laptop screen issue, First you should know what caused the problem.

The horizontal or vertical lines on the computer screen may be caused by various issues, ranging from outdated versions of graphics card drivers, incorrect video cable connections to flawed ribbon cables. You could enter the BIOS settings to determine whether it is a software-related or hardware-related problem.

Since BIOS is not a part of the Windows 10 operating system, if you still see horizontal or vertical lines on the computer screen, it indicates that it is software-related. If you see no horizontal or vertical lines on your computer display in Windows 10, it tells you that it is related to the hardware.

There are six recommended solutions to fix horizontal or vertical lines on the computer screen in Windows 10, applied to any screen like Dell, Asus, HP, Lenovo, Microsoft Surface, Acer, etc..

If you update the video card driver to the latest version, the issue of horizontal white lines on your laptop screen may be resolved. To get the right card driver and to fix the laptop screen, you can go to the manufacturer’s driver page of your operating system. But it will take a long time; Alternatively, you can try to select a professional driver and download and update the utility tool like Driver Talent. This tool will automatically download and install the latest version of the video card driver on your system.

Horizontal or vertical lines on your laptop screen may appear due to an incorrect screen resolution. To adjust the settings, you must change the appropriate settings as follows:

Step 4: Some screen resolution will be visible to you. You must set the resolution drop-down menu with the text “Recommended” next to it and click “OK”.

Once it is proved that the horizontal or vertical lines on the computer screen in Windows 10 are software-related, the most reliable culprit is the outdated graphics card driver. You need to upgrade it to the latest version to get rid of the driver compatibility problem. To do this, you can update the Display driver from Device Manager manually and check if it helps, which can take a long period of time.

On second thought, you can try the easiest method to adopt a professional driver download and update utility, such as Driver Talent, well-known as the safest and fastest way to update drivers, which can help to find out the outdated graphics card driver in seconds and then automatically download and install the latest version in 2 minutes.

A corrupt video cable connection may also cause horizontal or vertical lines on your laptop screen. In this case, you must turn off your system, disconnect the video cables, and then reconnect them to the right place. Once you have reinserted it, turn on your device and see if the problem is resolved.

Another major cause for the formation of white horizontal lines is a defective flat cable. In this case, all you need to do is turn off your laptop, replace the ribbon cable, and then turn on the laptop to see if the problem is resolved.

As I said early, I will give you guys all possible methods to resolve the “white lines issues on the laptop screen”. I hope you understand all the methods which I mentioned above. If you follow the methods step by step you can resolve this issue by yourself. To get rid of white lines on laptop screens, first you need to know what is the reason behind this problem, why the white line appears on your laptop screen. Once you figure it out it becomes easy to fix that problem.