lcd panel white line at the very bottom brands

In order to indicate whether the issue is driver related or hardware related, kindly start your in Safe Mode and check to see if the issue still persists or not:

If the issue still persists, most probably the issue is hardware related and the screen needs to be replaced. To double-check it, restart your computer and enter the BIOS, if the screen has the same issue, it means the screen 100% is damaged.

However, if the issue does not exist in Safe Mode and BIOS, it means the issue is driver related and you should uninstall the display driver completely using this free DDU tool:

After that, go to the manufacturer"s official website and download then install the latest or a compatible graphics card driver or you can contact the manufacturer"s support services to provide you with a compatible driver.

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

Harassment is any behavior intended to disturb or upset a person or group of people. Threats include any threat of suicide, violence, or harm to another.

Ours is a Sony Bravia that is now over 10 years old. Several months ago we started noticing lines, especially on the left (our left) side of the screen. They’d go away after the tv warmed up. Then we started noticing it was darker on that side of the screen, but again, after the tv warmed up the screen would be normal. Then about two months ago it started getting worse and didn’t ever get completely better, even after the tv warmed up. So I watched some youtube videos that all talked about the ribbon cables becoming loose over time and to apply pressure along the top and see if that made it better, and if so, it was a loose cable and if you put electrical tape or something that would help keep the pressure, it would fix the problem. Hubby pressed along the top and sure enough, when he pressed in one spot on the left side suddenly the picture cleared up. Stayed good for about a week, then problems again, pressed again, fixed again. A week or so later, same problem, but this time when he pressed on it nothing got better.

So I decided to take the cover off and look at it better. As I was pressing on the tops of the ribbon cables that run down from the top of the frame, for a minute it got better but then suddenly there was a wide white vertical line, with a thin green one down the center of it, running down the front of the screen, and it was perfectly aligned with one of the cables. So now I still have the dark side of the screen, and some ghosting, and some lines, but now this bright white streak/line right down the front. Another weird thing is that if the whole screen is bright (like watching a show set in a snowy place) then the darkness even on the left side is basically gone, but if the scene is dark at all, that side is almost black. I don’t know if it means that particular ribbon cable is bad, or if something is loose, if things need to be replaced or what. It’s very frustrating as it’s been a great tv. Hubby wants to just buy a new one, but even if he does I would still like to try and figure out this one as it could then go in another room.

Watching your mobile screen with those white or black vertical/horizontal lines is annoying. In short, it’s tough to use a phone with these lines appearing on the screen. Typically, this issue is associated with the LCD, caused by a faulty hardware component in your device due to some accidental fall or water damage. Phones with such damages can only be fixed at a phone repair center.

If you are itel, TECNO or Infinix phone user and is troubled with vertical and horizontal line issues, make a reservation now without waiting time at the service shop. Carlcare Service will fix your phones easily. If your phone is under warranty, Carlcare can also save you repair costs. Check warranty now>>

However, sometimes the culprit could be an app or software glitch, hindering the functionality of key components like display assembly or motherboard. In that case, you can tackle the situation at home.

Before you head on to the fixes, let’s make your phone data safe. Sometimes, these lines are irreversible, and even the solutions you’re up to try may be followed by some sort of data loss. Therefore, the first thing you should do is make a backup of important files and apps on your device. Some popular ways for data back in Android devices are via:

In case you’re not sure about the process, it’s better to take help from a professional repair center. For Infinix, Itel, and TECNO users, Carlcare Service - being their official service center for these brands- is a recommended place to go.

If there’re white lines on the screen, this solution may prove effective. A battery cycle is when you charge a mobile to 100% and let it drain to 0% again. Usually, the lines will disappear soon as you charge the battery fully.

If the above methods don’t work, it’s time to try this masterstroke. Using your phone in a safe mode will confirm if the lines are because of some faulty app or software.

Check if the lines are gone! If yes (hopefully), then a third-party app is the culprit. Now uninstall the latest downloaded applications until the issue is gone. OR you should try the Solution:4

Suppose the lines are still visible. Then the issue is most likely due to some hardware failure- and the best option for you is to take your device to a reliable repair center.

It won’t be aggregation if you call “Factory Reset” the mother of all solutions. It fixes most of the issues caused by an app or software glitch. The process actually brings your phone back to the factory setting by erasing all the apps and files you’ve downloaded post your phone purchase.

If the horizontal or vertical lines still appear on your phone screen after trying all the above methods, you better take your device to a reliable mobile repair store near you. Most likely, it’s a faulty hardware component that needs to be repaired or replaced. Here, we would suggest you opt for only an authorized service center, as this will ensure flawless repair at a reasonable cost. Besides, if any of the components have to be replaced, they will be genuine and as per your specific requirements.

If this issue arises in your Infinix, Itel, or TECNO phone, Carlcare Service is here to help you! Pay a visit to your nearby Carlcare center. Our highly skilled technicians will fix the issues and saves you much trouble.

As the official service center part, we provide 100% original spare parts and various value-added services for Infinix, Itel, and TECNO users. Now with the online reservation service through Carlcare App, you don’t need to wait while your phone is repaired at our service centers.

How you can fix a white lines which appear on your laptop screen. To understand that you need to read this whole blog till the end without skipping any part. At the end of this blog you will get the answer to your question of why these white lines appear and what caused them and how to get rid of this white line. So let"s get started;

The appearance of horizontal white lines is one of the most basic problems for users of laptops and computers. There may be several reasons behind the occurrence of this problem. For example, the outdated old version of the video card drivers, the bad connection of the video cable, broken ribbon cables, or a problem in your system software.

As we know there are a lot of reasons why there are horizontal or vertical lines on the computer screen display in Windows 10. To solve the horizontal or vertical lines across your desktop or laptop screen issue, First you should know what caused the problem.

The horizontal or vertical lines on the computer screen may be caused by various issues, ranging from outdated versions of graphics card drivers, incorrect video cable connections to flawed ribbon cables. You could enter the BIOS settings to determine whether it is a software-related or hardware-related problem.

Since BIOS is not a part of the Windows 10 operating system, if you still see horizontal or vertical lines on the computer screen, it indicates that it is software-related. If you see no horizontal or vertical lines on your computer display in Windows 10, it tells you that it is related to the hardware.

There are six recommended solutions to fix horizontal or vertical lines on the computer screen in Windows 10, applied to any screen like Dell, Asus, HP, Lenovo, Microsoft Surface, Acer, etc..

If you update the video card driver to the latest version, the issue of horizontal white lines on your laptop screen may be resolved. To get the right card driver and to fix the laptop screen, you can go to the manufacturer’s driver page of your operating system. But it will take a long time; Alternatively, you can try to select a professional driver and download and update the utility tool like Driver Talent. This tool will automatically download and install the latest version of the video card driver on your system.

Horizontal or vertical lines on your laptop screen may appear due to an incorrect screen resolution. To adjust the settings, you must change the appropriate settings as follows:

Step 4: Some screen resolution will be visible to you. You must set the resolution drop-down menu with the text “Recommended” next to it and click “OK”.

Once it is proved that the horizontal or vertical lines on the computer screen in Windows 10 are software-related, the most reliable culprit is the outdated graphics card driver. You need to upgrade it to the latest version to get rid of the driver compatibility problem. To do this, you can update the Display driver from Device Manager manually and check if it helps, which can take a long period of time.

On second thought, you can try the easiest method to adopt a professional driver download and update utility, such as Driver Talent, well-known as the safest and fastest way to update drivers, which can help to find out the outdated graphics card driver in seconds and then automatically download and install the latest version in 2 minutes.

A corrupt video cable connection may also cause horizontal or vertical lines on your laptop screen. In this case, you must turn off your system, disconnect the video cables, and then reconnect them to the right place. Once you have reinserted it, turn on your device and see if the problem is resolved.

Another major cause for the formation of white horizontal lines is a defective flat cable. In this case, all you need to do is turn off your laptop, replace the ribbon cable, and then turn on the laptop to see if the problem is resolved.

As I said early, I will give you guys all possible methods to resolve the “white lines issues on the laptop screen”. I hope you understand all the methods which I mentioned above. If you follow the methods step by step you can resolve this issue by yourself. To get rid of white lines on laptop screens, first you need to know what is the reason behind this problem, why the white line appears on your laptop screen. Once you figure it out it becomes easy to fix that problem.

Vertical and horizontal lines on the best desktop monitors can ruin the immersive effect from your display, which is especially frustrating if you’ve invested in your monitor, like one of the best curved gaming monitors. To find out how to fix annoying vertical lines or horizontal lines on an external monitor, you’ll first want to test the picture to find out what causes these lines on the computer monitor, whether the problem is from the PC, cable box, or another input source, or if the fault is with the monitor, its LCD panel or internal hardware itself. And while on the topic of “vertical” lines, there are vertical monitors that exist to help make certain professions or hobbies more efficient, like coding and streaming.

Before attempting any other troubleshooting, such as fixing black bars on the side of your monitor, the first step toward finding solutions for this desktop monitor problem is to isolate the source of the issue.

The first option is to test out the image on your favorite computer screen without any peripherals connected. To do this, disconnect all cable connections and use the remote control or the control panel to disconnect Bluetooth and WiFi, if your external monitor is so equipped. If there are no vertical or horizontal lines on the default picture or menu screen, then the problem is likely due to your PC or input device, or to your cable connections. If the lines still appear, then the issue is likely to be with the external monitor itself.

If the monitor shows lines when not connected to any cables or input method, the problem is likely with the monitor itself. Image issues such as lines can be caused by damaged internal ribbon cables or the LCD panel itself. If this is the case, the repair process will depend on what the hardware problem is, whether you have a flat or curved computer monitor. If you see light leaking on the edges of your monitor screen, you may have blacklight bleed, which you can learn about in our resource content on what is blacklight bleed.

If the lines go away when your external monitor has no input, then you’ll want to look for a connection issue or an issue with your PC or laptop’s graphics drivers, driver settings, or picture settings. Additionally, you may want to check for any input lag issues with your monitor at this time.

Make sure all cables are connected securely. A loose connector can cause various picture issues including gray lines, pink lines or green lines.You may want to unplug your monitor from the input device and check the condition of the ports.

You may be able to see if there are any bent or broken pins in the connectors of these input terminals. Double-check the cables if you have two monitors.

If you need more organization in your space, consider the best dual monitor mount. Don’t use a paperclip or other metal object to try and clear out a VGA terminal.

If the device picture settings are not compatible with the monitor’s native resolution, you may see errors, such as lines on the screen. On a Windows PC, setting a display resolution or refresh rate that is not supported can damage a monitor.

If you find a damaged part, you can either consult a repair service or professional repair technician, or you might want to fix it yourself using an electronics repair kit. Use caution when removing ports, and always unplug a monitor before working on a repair.You may need to consult the owners manuals to see what types of repair tools will be needed.If the cable is faulty, the solution may be just to buy a replacement cable.

That may be the best path if you need to immediately fix your monitor and can’t spend time researching and repairing the damaged part on your own, like if you use your monitor for work like a monitor for video editing.

Look for any video or graphics card driver with a yellow exclamation mark or question mark. These common error notifications may mean your laptop or PC graphics drivers are out of date.

Alternatively, you can run a system scan to discover errors and graphics driver software issues. If there is a problem with your graphics card driver, it may show up on a system scan. Try booting up in safe mode or BIOS, if available; this will often show whether the display issue is a software problem or a hardware problem.

A screen resolution adjustment may also help. If the device picture settings are not compatible with the monitor’s native resolution, you may see errors such as lines on the screen. On a Windows PC, setting a display resolution or refresh rate that is not supported can damage a monitor.This is more often a risk with older CRT monitors.

Explanation of why pulse width modulated backlighting is used, and its side-effects, “Pulse Width Modulation on LCD monitors”, TFT Central. Retrieved June 2012.https://www.unm.edu/~tbeach/terms/inputoutput.html

So, why there are green lines on a monitor? Well, several factors might be at play if the displays attached to your PC aren’t operating correctly. It’s conceivable that your adapter or cable connection is the problem. Change the cable if it doesn’t work. If nudging doesn’t work, try another.

Throughout this post, we’ll explain why green lines occur on your display and the best techniques to remedy them. The extra information will be invaluable in fixing all of your monitor’s green lining concerns. It’s time to delve in!

There are a variety of possible causes for horizontal green lines or vertical lines on your computer screen, from outdated video card drivers to damaged ribbon cables and improper video cable connections. To determine whether the problem is software or hardware, you may examine the BIOS settings.

When you see a green line on your computer screen, you should inspect your display for any faults, including all the connectors. There might be a problem with the cable causing the monitor’s color to lose signal.

It would help if you examined the possibility that your computer has been infected with a virus or other malicious software. While this isn’t one of the most prevalent reasons for a green vertical line on the display, it’s still possible.

Faulty graphics drivers might also cause problems with your monitor’s connection to the computer. However, although this is the most common symptom, it may also be seen in the form of green lines on a monitor.

Because Windows 10 does not contain the BIOS, any horizontal or vertical striations on your display problem result from a software problem. If you don’t see any horizontal or vertical lines on your Windows 10 computer screen, this is likely a hardware problem.

It’s possible that your computer’s drivers don’t cause the flickering green lines on your display if they occur immediately after the computer has started up and not on the initial screen while the machine is starting up.

The status of “This device is operating well” indicates that the hardware failure has no problems connecting to Windows 10 once the procedures are completed.

You’ll get an error number and an explanation of the issue if the component isn’t operating correctly. The device has been deactivated and must be re-enabled to fix “error code 22,” for example.

You may also try downloading the drivers from the hardware manufacturer’s website if it doesn’t work. Make sure you’re looking at “Display adapters” (in this case, “NVIDIA GeForce 9800 GTX/9800 GTX+”) and the graphics card’s name.

This is the standard procedure to remove the green lines on the monitor, regardless of whether your motherboard is set to UEFI or a classic BIOS configuration:

It’s good to have a backup copy of all of your computer’s crucial data before you begin. Even if a BIOS update fails, the data on your hard drive is not at risk.

Making a copy of your BIOS is an excellent idea, too. Don’t miss this step if you have to perform it manually, even if it’s done automatically during an update.

The prior driver version must be installed in this case. Using the drop-down option, choose the previous graphics driver version in Download Center to download and install it.

The second case is a well-known one. It will not install updates if you shut off your computer during Active Hours. For this reason, it is necessary to either modify Active Hours or manually install the application.

Monitoring a computer’s refresh rate can help identify and correct problems with graphics performance. The monitor’s refresh rate refers to how often the screen updates its image. A slow refresh rate can cause visual artifacts, such as green lines, on the screen.

Collectively, these lines indicate that the monitor is not keeping up with the latest graphics rendering instructions. This can lead to an overall degraded experience when using the computer.

The prior driver version must be installed in this case. Using the drop-down option, choose the previous graphics driver version in Download Center to download and install it.

Knowing your screen resolution, even if you aren’t an engineer or a photographer. You can appreciate your multimedia activities better if you know what you have and what you can do. In Windows 10, you may verify your screen’s native resolution by following these steps:

The resolution may be changed by selecting a different option from the drop-down menu. You should only view content that is compatible with your computer’s capabilities.

If you purchase a new external monitor or video card, you may have to change your resolution. If you’re having problems with your monitor, the first thing you should do is check the resolution. It’s a straightforward solution to a variety of visual issues.

When you start Windows regularly, programs and services in the background may cause these conflicts. If you’re having trouble accessing Task Manager, we’ve got the answer.

The monitor cabinet should never be opened to service this item. Everything that hasn’t been stated explicitly in the user handbook should be avoided at all costs.

Do not connect the monitor to anything other than the designated power supply and HDMI cable, which should be clearly stated on the monitor label or backplate.

Ensure that the monitor is close to a working power supply. The monitor’s power cord may be yanked out of the socket with a rugged grip. Attempting to disconnect the display issue by pulling its cord will not work.

Be sure to switch off your display when not in use. A screen saver program and turning off the display when it’s not in use will significantly prolong the monitor’s life.

The cabinet’s design includes ventilation holes. These openings should not be obstructed in any way. You should never shove anything into a cabinet slot or any other aperture!

The green line of death seems to be caused by a hardware problem based on the current symptoms. If you go back in time, you may discover similar problems on non-Apple devices. This problem only appeared on OLED-display phones, to be more exact.

There may be more to the problem with water damage than just a replacement screen, but it’s typically just a matter of getting a new LCD or OLED display.

Language settings are not lost when a monitor is reset to factory settings. Your specific settings, such as contrast, brightness, and picture ratio, will need to be re-entered after a factory reset.

Due to obsolete GPU drivers, the green lines on a Windows 10 laptop are standard. Using specialist driver update tools, you may repair this problem. One of the most prevalent reasons for this issue is a malfunctioning laptop display.

Your phone’s LCD might be damaged if you don’t mend a cracked screen right away. Damage to the LCD screen might occur if dust penetrates the screen cracks. Your phone’s LCD screen might be damaged if you drop it in water or other liquid.

A faulty video connection is most likely to blame for a monitor with no signal. Connect your display and PC using a different VGA cable or ribbon cable to check whether the problem remains. If not, then your video cable is to blame for this problem. Try attaching your display to another computer to see if it helps.

That’s all about the green lines on the monitor from us. An external display with bothersome vertical lines or horizontal lines may be fixed by testing the image to determine what causes these lines on the computer monitor.

It doesn’t matter whether the computer, cable box, or any other input source is to blame; the monitor, its LCD screen, or internal hardware is to blame.

TV screen lines are an irritating occurrence, and many different issues with the TV can cause them. This article will go over what causes this, whether or not you can fix it depending on the cause, and how to fix it.

When any part of a TV"s display gets damaged, corrupted, or is defective, it can cause lines to appear on the screen. Some TV parts that can cause horizontal lines to appear are the LCD panel, T-Con board, or row drivers.

Issues with these parts can happen for many reasons, and the way your lines appear can tell you a lot about what"s wrong. If the lines are new, one of these parts was likely damaged.

If you"re seeing colored horizontal lines, it may be because of the T-Con board. If other parts don"t seem to be an issue, this part of the TV could be causing the lines.

If lines appear on your TV, you"ll want to inspect the TV itself. You can fix some issues that cause lines to appear, but others may require a professional or a new TV altogether. Some of the most common causes of horizontal lines are:

LCD screen damage. The LCD provides your TV display with light. If you"re handy, you might be able to fix this by doing a little work with the insides of the TV, which you can read about below.

Other devices you"ve connected to the TV. They may also be having issues of their own or might not be compatible with your TV. In this case, you"ll have to inspect the device instead of the TV.

All these issues can be fixed, though it ranges in difficulty. If you"re unsure how to repair your TV, you may want to get the TV professionally repaired.

Knock or tap on the back of your TV. If the issue is with cable connections, this could solve the problem. It could also indicate a problem with your T-Con board. It won"t fix the issue, and the lines may reappear, but it can give some insight into the problem. If it"s your T-Con board, you"ll want to have T-Con replaced.

Change your TV"s settings. This step might work for you if the issue isn"t because of damage. First, try switching the TV input from different HDMI ports or AV ports. Doing this can rule out problems with specific inputs.

Run a picture test on your TV. It"s a built-in feature on newer TV"s which allows you to see if the TV display is corrupted. Doing this may look different depending on your TV, but generally, you can go into the settings and find a support option or just a picture test option.

Take a look at the LCD screen. If it"s damaged, you may want to get the screen repaired or replaced. It may be a less costly option than buying a new TV altogether.

Vertical lines on a TV appear for the same reasons as horizontal lines: loose cables and wires, screen damage, or a faulty T-Con board. Leaving the TV turned on for too long can also cause vertical lines.

The steps for fixing lines on your TV will also work to fix TV glitches like flicker and stutter. For example, check the cables and connectors and ensure there"s no issue with your input device.

If your TV screen looks blue, it could be faulty connections, a defective backlight, or incorrect color settings. Some LED TVs naturally have a blue tint, which you can offset by changing the color temperature.

To fix screen burn on a TV, adjust the brightness settings and enable pixel-shift. Sometimes playing a colorful video with fast-moving action for half an hour might help.

I suddenly have a thin black line, probably exactly 1 pixel wide, running vertically from top to bottom on my monitor. Could that be a display card problem is it more likely to be the monitor?

I get this "flickering" line as well. Sometimes it"s faint, sometimes it"s on/off, sometimes it permanent. A reboot or turning monitor on and off helps.

It also moves, that is, it"s not the same line of pixels that gets affected. But it is only on the right side of the monitor, so far. But It appears to be the same few lines that gets affected.

Now, you would think it"s the graphics card, but no. I took my Apple TV 4K and connected it to my monitor with it"s own HDMI cable which is connected to the TV. The line appeared there as well.

It has to be some poor/bad connection to the LCD display and internal components. Or a faulty/cheap capacitor (not flux) of some sort. Perhaps it get"s overloaded after some use time (heat) and it stutters "something", because it"s never at a fresh cold restart, always after some time. I"m not a technical expert FYI.

Just like televisions, laptop displays start to flicker too after a few years. You may sometimes also notice the display turning blank even when the laptop is on. Alternatively, you might find some white lines running down the display.

This doesn’t necessarily mean that there is an issue with the motherboard. If your laptop keeps turning off every few minutes and doesn’t turn on, there is a high chance that the AC adapter has malfunctioned. You can get help from a professional to confirm and get the AC adapter replaced, if required. There is also a possibility that the DC power jack may have broken. A DC connector (or DC plug) is an electrical connector that supplies steady power to the device.

If the DC jack has broken, you can try adjusting the plug’s angle in its jack. If you see some lights turning on but the device is still not booting, it’s time to replace the DC jack. If that doesn’t help, it’s a clear indication of a motherboard-related issue. You can either get the motherboard repaired or replaced by the brand service center. Getting the motherboard repaired could cost you anywhere up to Rs 10,000, whereas the cost of replacing the motherboard can go anywhere up to Rs 25,000.

If you ever notice multi-coloured or single-coloured vertical lines on your laptop screen, it may be a result of a hardware failure or due to damage to the screen. To try fixing it yourself, first unplug your laptop, hold the power button for 30 seconds and restart the laptop. If you continue to see coloured lines, the issue is probably with the LCD screen, which will need to be replaced from the brand’s service center. To be sure about the LCD screen problem, try connecting your laptop to another monitor and see if the issue persists. If it does, the issue is certainly in the LCD panel.

On turning on the laptop when you see the lights blinking and hear the fan working but if the laptop screen is blank and doesn’t display anything, this is again an indication of a faulty motherboard. The first thing to do is to transfer all the data to another drive to make sure your data is safe. Before going ahead and getting the motherboard repaired or replaced, you could try performing a hard reset (also known as a factory reset), which can mostly help in resolving the blank display issue.

Firstly, check if your laptop’s brightness level is set to maximum. If the display is still dim, try restarting the device. This could just be a system error that can be resolved by restarting the device. Also, check if the AC adapter cord is loose and firmly connect it to the outlet and laptop. If the issue still persists, it is mostly due to a failure of the LCD. Behind the LCD, there is an inverter board and backlight bulb which control the picture.

The inverter board converts the low voltage your laptop uses, into higher voltage required by the long bulb that lights up the LCD screen. If the inverter board or bulb fail, you will experience the problem of a dimmed display. Even if one of these two components fail, the screen will need to be replaced, unless the service center can help by just replacing the bulb. We wouldn’t recommend you try resolving it yourself, as this is more complex and you could end up damaging the circuit board and the backlight lamp. So, it’s best to leave this job to an expert.

Laptops are fragile and can easily break, especially with more and more thinner and lighter models being launched now. Some of the most common ways how a laptop is damaged include: when it accidentally falls and the screen cracks, when it’s held at an awkward angle or if you unknowingly placed something heavy on the laptop. Remember, a cracked laptop screen can affect the overall functioning of the device in some cases.

Since brands do not cover the laptop screen, it’s best to get your device covered with a protection plan in advance. Screen replacements are expensive and can cost you anywhere up to Rs. 15,000 but if you have the

Need an expert to take a look at your laptop? Book Onsitego’s on-demand repair service. Besides taking care of common laptop problems like battery draining or laptop hanging, we can help with issues like setting up the operating system or removing malware/virus from your device. Our service engineers are qualified and use only good-quality spare parts while repairing. The best part is that our service is backed with a 90-day post-service warranty.

Follow Onsitego on Facebook, Instagram, Twitter, and YouTube to get the latest news, reviews, maintenance tips, and videos about your favourite gadgets and appliances.

Is your brand new Apple Watch displaying a vertical white line on screen that’s noticeable only in certain situations? Don’t panic, you’re not the only one experiencing this issue. First, of all be happy because you most likely have a 20/20 perfect vision!

The white line on the Apple Watch screen is not easy to spot. In fact, some Apple Watch owners plagued with this issue have started to doubt their eyesight, because they were not sure if the vertical white line is reality or just a result of their imagination caused by bad eye vision.

However, there have been a series of users that have reported the same Apple Watch problem. Surprisingly, this seems to be an old issue as it has been signaled for models as early as the Series 3 and Series 4.

Fact: Do you notice any vertical white line on the Apple Watch screen? In most cases it appears just off center, but it can also show up near the left or right edge!

Another good way of checking your wrist-worn device for the white line display anomaly is to browse a map in the built-in Maps app. The grey background will allow you to detect the glitch easier.

Important: Another Apple Watch display problem causes a vertical white line on the screen! However in this case the stripe is easily noticeable on every app or watchOS screen. In this case your device is most likely dealing with a damaged cable. The problem is also known as a minefield and renders the Apple Watch as not repairable.

Have you also been unlucky enough to buy an Apple Watch with a white line on screen? Have you returned to Apple? Was it difficult to get a free replacement unit? Share your experience in the comments section!

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

don"t happen when you press screen, it"s issue with Digitizer since it has dead pixels happens rarely usually pixels fade out with time or burn in and to avoid that keep brightness now since all led uses different power as what color it has to re produce